This article is about sodium chloride as a chemical compound. For sodium chloride in cooking and the diet, see Salt. For sodium chloride as a mineral, see Halite.
"NaCl" redirects here. For other uses, see NaCl (disambiguation).
| Sodium chloride |
|
|
|
|
Other names
Common salt
Halite
Rock salt
Saline
Sodium chloric
Table salt
|
| Identifiers |
| CAS number |
7647-14-5 Y |
| PubChem |
5234 |
| ChemSpider |
5044 Y |
| UNII |
451W47IQ8X Y |
| EC number |
231-598-3 |
| KEGG |
D02056 Y |
| MeSH |
Sodium+chloride |
| ChEBI |
CHEBI:26710 Y |
| ChEMBL |
CHEMBL1200574 N |
| RTECS number |
VZ4725000 |
| ATC code |
A12CA01,B05CB01, B05XA03, S01XA03 |
| Beilstein Reference |
3534976 |
| Gmelin Reference |
13673 |
| Jmol-3D images |
Image 1 |
|
|
-
InChI=1S/ClH.Na/h1H;/q;+1/p-1 Y
Key: FAPWRFPIFSIZLT-UHFFFAOYSA-M Y
InChI=1/ClH.Na/h1H;/q;+1/p-1
Key: FAPWRFPIFSIZLT-REWHXWOFAE
|
| Properties |
| Molecular formula |
NaCl |
| Molar mass |
58.44 g mol−1 |
| Appearance |
Colorless crystals |
| Odor |
Odorless |
| Density |
2.165 g/cm3 |
| Melting point |
801 °C (1,474 °F; 1,074 K) |
| Boiling point |
1,413 °C (2,575 °F; 1,686 K) |
| Solubility in water |
359 g/L |
| Solubility in ammonia |
21.5 g/L |
| Solubility in methanol |
14.9 g/L |
| Refractive index (nD) |
1.5442 (at 589 nm) |
| Structure |
| Crystal structure |
Cubic
(see text), cF8 |
| Space group |
Fm3m, No. 225 |
| Lattice constant |
a = 564.02 pm |
Coordination
geometry |
Octahedral (Na+)
Octahedral (Cl−) |
| Thermochemistry |
Specific
heat capacity C |
36.79 J K−1 mol−1 |
Std molar
entropy So298 |
72.11 J K−1 mol−1 |
Std enthalpy of
formation ΔfHo298 |
−411.12 kJ mol−1 |
| Hazards |
| MSDS |
External MSDS |
| NFPA 704 |
|
| LD50 |
3000 mg/kg (oral, rats)[1] |
| Related compounds |
| Other anions |
Sodium fluoride
Sodium bromide
Sodium iodide |
| Other cations |
Lithium chloride
Potassium chloride
Rubidium chloride
Caesium chloride |
| Supplementary data page |
Structure and
properties |
n, εr, etc. |
Thermodynamic
data |
Phase behaviour
Solid, liquid, gas |
| Spectral data |
UV, IR, NMR, MS |
| Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa) |
| N (verify) (what is: Y/N?) |
| Infobox references |
|
|
Sodium chloride / /,[2] also known as salt, common salt, table salt or halite, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chlorine atoms. Sodium chloride is the salt most responsible for the salinity of the ocean and of the extracellular fluid of many multicellular organisms. In the form of edible or table salt it is commonly used as a condiment and food preservative. Large quantities of sodium chloride are used in many industrial processes, and it is a major source of sodium and chlorine compounds used as feedstocks for further chemical syntheses. A second major consumer of sodium chloride is de-icing of roadways in sub-freezing weather.
Contents
- 1 Chemistry
- 1.1 Solid sodium chloride
- 1.2 Aqueous solutions
- 1.3 Unexpected stable stoichiometric variants
- 2 Occurrence
- 3 Production
- 4 Uses
- 4.1 Chemicals production
- 4.1.1 Chlor-alkali industry
- 4.2 Soda ash industry
- 4.3 Standard
- 4.4 Miscellaneous industrial uses
- 4.5 Water softening
- 4.6 Road salt
- 4.6.1 Environmental effects
- 4.7 Food industry, medicine and agriculture
- 4.8 Firefighting
- 4.9 Cleanser
- 4.10 Optical usage
- 5 Biological functions
- 6 See also
- 7 References
- 8 External links
Chemistry
Solid sodium chloride
See also: Cubic crystal system
In solid sodium chloride, each ion is surrounded by six ions of the opposite charge as expected on electrostatic grounds. The surrounding ions are located at the vertices of a regular octahedron. In the language of close-packing, the larger chloride ions are arranged in a cubic array whereas the smaller sodium ions fill all the cubic gaps (octahedral voids) between them. This same basic structure is found in many other compounds and is commonly known as the halite or rock-salt crystal structure. It can be represented as a face-centered cubic (fcc) lattice with a two-atom basis or as two interpenetrating face centered cubic lattices. The first atom is located at each lattice point, and the second atom is located half way between lattice points along the fcc unit cell edge.
Thermal conductivity of NaCl as a function of temperature has a maximum of 2.03 W/(cm K) at 8 K (−265.15 °C; −445.27 °F) and decreases to 0.069 at 314 K (41 °C; 106 °F). It also decreases with doping.[3]
Aqueous solutions
The attraction between the Na+ and Cl− ions in the solid is so strong that only highly polar solvents like water dissolve NaCl well.
Solubility of NaCl in various solvents
(g NaCl / 1 kg of solvent at 25 °C (77 °F))[4] |
| Water |
360 |
| Formamide |
94 |
| Glycerin |
83 |
| Propylene glycol |
71 |
| Formic acid |
52 |
| Liquid ammonia |
30.2 |
| Methanol |
14 |
| Ethanol |
0.65 |
| Dimethylformamide |
0.4 |
| 1-Propanol |
0.124 |
| Sulfolane |
0.05 |
| 1-Butanol |
0.05 |
| 2-Propanol |
0.03 |
| 1-Pentanol |
0.018 |
| Acetonitrile |
0.003 |
| Acetone |
0.00042 |
When dissolved in water, the sodium chloride framework disintegrates as the Na+ and Cl− ions become surrounded by the polar water molecules. These solutions consist of metal aquo complex with the formula [Na(H2O)8]+, with the Na-O distance of 250 pm. The chloride ions are also strongly solvated, each being surrounded by an average of 6 molecules of water.[5] Solutions of sodium chloride have very different properties from pure water. The freezing point is −21.12 °C (−6.02 °F) for 23.31 wt% of salt, and the boiling point of saturated salt solution is near 108.7 °C (227.7 °F).[6] From cold solutions, salt crystallises as the dihydrate NaCl·2H2O.
Unexpected stable stoichiometric variants
Common salt has a well-established 1:1 molar ratio of sodium and chlorine. In 2013, compounds of sodium and chloride of different stoichiometries have been discovered by a team at Stony Brook University; five new compounds were predicted (e.g., Na3Cl, Na2Cl, Na3Cl2, NaCl3, and NaCl7). The existence of some of them has been tested and experimentally confirmed: cubic and orthorhombic NaCl3 and two-dimensional metallic tetragonal Na3Cl. This indicates that compounds violating chemical intuition are possible, in simple systems under nonambient conditions.[7]
Occurrence
Small particles of sea salt are the dominant cloud condensation nuclei well out at sea, which allow the formation of clouds in otherwise non-polluted air.[8]
Production
Modern rock salt mine near Mount Morris, New York, United States
Salt is currently mass-produced by evaporation of seawater or brine from brine wells and salt lakes. Mining of rock salt is also a major source. China is the world's main supplier of salt.[9] In 2010, world production was estimated at 270 million tonnes, the top five producers (in million tonnes) being China (60.0), United States (45.0), Germany (16.5), India (15.8) and Canada (14.0).[10] Salt is also a byproduct of potassium mining.
Uses
In addition to the familiar domestic uses of salt, more dominant applications of the approximately 250 megatons/year production (2008 data) include chemicals and de-icing.[11]
Chemicals production
Salt is the source, directly or indirectly, for the production of many chemicals, which consume most of the world's production.[9]
Chlor-alkali industry
See also: Chloralkali process
It is the starting point for the Chloralkali process, which provides the world with chlorine and sodium hydroxide according to the chemical equation
- 2 NaCl + 2 H2O → Cl2 + H2 + 2 NaOH
This electrolysis is conducted in either a mercury cell, a diaphragm cell, or a membrane cell. Each of those use a different method to separate the chlorine from the sodium hydroxide. Other technologies are under development due to the high energy consumption of the electrolysis, whereby small improvements in the efficiency can have large economic paybacks. Some applications of chlorine include PVC, disinfectants, and solvents. Sodium hydroxide enables industries that produce paper, soap, and aluminium.
Soda ash industry
Via the Solvay process, sodium chloride is used to produce sodium carbonate and calcium chloride. Sodium carbonate is used to produce glass, sodium bicarbonate, and dyes as well as a myriad of other chemicals. In the Mannheim process and in the Hargreaves process, it is used for the production of sodium sulfate and hydrochloric acid.
Standard
Sodium chloride has an international standard that is created by ASTM International. The standard is named ASTM E534-13 and it is the standard test methods for chemical analysis of sodium chloride. These methods listed provide procedures for analyzing sodium chloride to determine if it is suitable for its intended use and application.
Miscellaneous industrial uses
Sodium chloride is heavily used, so even miscellaneous applications can consume massive quantities. In oil and gas exploration, salt is an important component of drilling fluids in well drilling. It is used to flocculate and increase the density of the drilling fluid to overcome high downwell gas pressures. Whenever a drill hits a salt formation, salt is added to the drilling fluid to saturate the solution and to minimize the dissolution within the salt stratum.[11] Salt is also used to increase the curing of concrete in cemented casings.[9]
In textiles and dyeing, salt is used as a brine rinse to separate organic contaminants, to promote “salting out” of dyestuff precipitates, and to blend with concentrated dyes to standardize them. One of its main roles is to provide the positive ion charge to promote the absorption of negatively charged ions of dyes.[9]
It also is used in processing aluminium, beryllium, copper, steel and vanadium. In the pulp and paper industry, salt is used to bleach wood pulp. It also is used to make sodium chlorate, which is added along with sulfuric acid and water to manufacture chlorine dioxide, an excellent oxygen-based bleaching chemical. The chlorine dioxide process, which originated in Germany after World War I, is becoming more popular because of environmental pressures to reduce or eliminate chlorinated bleaching compounds. In tanning and leather treatment, salt is added to animal hides to inhibit microbial activity on the underside of the hides and to attract moisture back into the hides.[9]
In rubber manufacture, salt is used to make buna, neoprene and white rubber types. Salt brine and sulfuric acid are used to coagulate an emulsified latex made from chlorinated butadiene.[9][11]
Salt also is added to secure the soil and to provide firmness to the foundation on which highways are built. The salt acts to minimize the effects of shifting caused in the subsurface by changes in humidity and traffic load.[9]
Water softening
Hard water contains calcium and magnesium ions that interfere with action of soap and contribute to the buildup of a scale or film of alkaline mineral deposits in household and industrial equipment and pipes. Commercial and residential water-softening units use ion exchange resins to remove the offending ions that cause the hardness. These resins are generated and regenerated using sodium chloride.[9][11]
Road salt
Phase diagram of water-NaCl mixture.
The second major application of salt is for de-icing and anti-icing of roads, both in grit bins and spread by winter service vehicles. In anticipation of snowfall, roads are optimally "anti-iced" with brine (concentrated solution of salt in water), which prevents bonding between the snow-ice and the road surface. This procedure obviates the heavy use of salt after the snowfall. For de-icing, mixtures of brine and salt are used, sometimes with additional agents such as calcium and magnesium chloride. The use of salt or brine becomes ineffective below −10 °C (14 °F).
Mounds of road salt for use in winter.
Salt for de-icing in the United Kingdom predominantly comes from a single mine in Winsford in Cheshire. Prior to distribution it is mixed with <100 ppm of sodium hexacyanoferrate(II) as an anti-caking agent, which enables rock salt to flow freely out of the gritting vehicles despite being stockpiled prior to use. In recent years this additive has also been used in table salt. Other additives had been used in road salt to reduce the total costs. For example, in the US, a byproduct carbohydrate solution from sugar beet processing was mixed with rock salt and adhered to road surfaces about 40% better than loose rock salt alone. Because it stayed on the road longer, the treatment did not have to be repeated several times, saving time and money.[9]
In the technical terms of physical chemistry, the minimum freezing point of a water-salt mixture is −21.12 °C (−6.02 °F) for 23.31 wt% of salt. Freezing near this concentration is however so slow that the eutectic point of −22.4 °C (−8.3 °F) can be reached with about 25 wt% of salt.[6]
Environmental effects
Road salt ends up in fresh water bodies and could harm aquatic plants and animals by disrupting their osmoregulation ability.[12] The omnipresence of salt poses a problem in any coastal coating application, as trapped salts cause great problems in adhesion. Naval authorities and ship builders monitor the salt concentrations on surfaces during construction. Maximum salt concentrations on surfaces are dependent on the authority and application. The IMO regulation is mostly used and sets salt levels to a maximum of 50 mg/m2 soluble salts measured as sodium chloride. These measurements are done by means of a Bresle test.
In highway de-icing, salt has been associated with corrosion of bridge decks, motor vehicles, reinforcement bar and wire, and unprotected steel structures used in road construction. Surface runoff, vehicle spraying, and windblown actions also affect soil, roadside vegetation, and local surface water and groundwater supplies. Although evidence of environmental loading of salt has been found during peak usage, the spring rains and thaws usually dilute the concentrations of sodium in the area where salt was applied.[9]
Food industry, medicine and agriculture
Main article: Salt
Many micro organisms cannot live in an overly salty environment: water is drawn out of their cells by osmosis. For this reason salt is used to preserve some foods, such as smoked bacon, fish, or cabbage. It can also be used to detach leeches that have attached themselves to feed.[citation needed].
Salt is added to food, either by the food producer or by the consumer, as a flavor enhancer, preservative, binder, fermentation-control additive, texture-control agent and color developer. The salt consumption in the food industry is subdivided, in descending order of consumption, into other food processing, meat packers, canning, baking, dairy and grain mill products. Salt is added to promote color development in bacon, ham and other processed meat products. As a preservative, salt inhibits the growth of bacteria. Salt acts as a binder in sausages to form a binding gel made up of meat, fat, and moisture. Salt also acts as a flavor enhancer and as a tenderizer.[9]
In many dairy industries, salt is added to cheese as a color-, fermentation-, and texture-control agent. The dairy subsector includes companies that manufacture creamery butter, condensed and evaporated milk, frozen desserts, ice cream, natural and processed cheese, and specialty dairy products. In canning, salt is primarily added as a flavor enhancer and preservative. It also is used as a carrier for other ingredients, dehydrating agent, enzyme inhibitor and tenderizer. In baking, salt is added to control the rate of fermentation in bread dough. It also is used to strengthen the gluten (the elastic protein-water complex in certain doughs) and as a flavor enhancer, such as a topping on baked goods. The food-processing category also contains grain mill products. These products consist of milling flour and rice and manufacturing cereal breakfast food and blended or prepared flour. Salt is also used a seasoning agent, e.g. in potato chips, pretzels, cat and dog food.[9]
Sodium chloride is used in veterinary medicine as emesis causing agent. It is given as warm saturated solution. Emesis can also be caused by pharyngeal placement of small amount of plain salt or salt crystals.
Firefighting
A class D fire extinguisher for various metals
Sodium chloride is the principal extinguishing agent in fire extinguishers (Met-L-X, Super D) used on combustible metal fires such as magnesium, potassium, sodium, and NaK alloys (Class D). Thermoplastic powder is added to the mixture, along with waterproofing (metal stearates) and anti-caking materials (tricalcium phosphate) to form the extinguishing agent. When it is applied to the fire, the salt acts like a heat sink, dissipating heat from the fire, and also forms an oxygen-excluding crust to smother the fire. The plastic additive melts and helps the crust maintain its integrity until the burning metal cools below its ignition temperature. This type of extinguisher was invented in the late 1940s in the cartridge-operated type shown here, although stored pressure versions are now popular. Common sizes are 30 pounds (14 kg) portable and 350 pounds (160 kg) wheeled.
Cleanser
Since at least medieval times, people have used salt as a cleansing agent rubbed on household surfaces. It is also used in many brands of shampoo, toothpaste and popularly to de-ice driveways and patches of ice.
Optical usage
Defect-free NaCl crystals have an optical transmittance of about 90% between 200 nm and 20 µm. They were therefore used in optical components (windows and prisms) operating in the infrared spectral range, where few non-absorbing alternatives exist and where requirements for absence of microscopic inhomogeneities are less strict than in the visible range. While inexpensive, NaCl crystals are soft and hygroscopic – when exposed to the ambient air they gradually cover with "frost". This limits application of NaCl to dry environments or for short-term uses such as prototyping. Nowadays materials like zinc selenide (ZnSe), which are stronger mechanically and are less sensitive to moisture, are used instead of NaCl for the IR spectral range.
Biological functions
For further information about sodium chloride in the diet, see Salt.
The long held belief that a high-salt diet raises the risk of cardio-vascular disease is coming under scrutiny.[13] More recently, dietary salt was demonstrated to attenuate nitric oxide production. Nitric oxide (NO) contributes to vessel homeostasis by inhibiting vascular smooth muscle contraction and growth, platelet aggregation, and leukocyte adhesion to the endothelium.[14]
-
Jordanian and Israeli salt evaporation ponds at the south end of the Dead Sea.
-
Mounds of salt, Salar de Uyuni, Bolivia.
-
Evaporation lagoons, Aigues-Mortes, France.
See also
|
Wikibooks Cookbook has a recipe/module on
|
- Biosalinity
- Halite, the mineral form of sodium chloride
- Salinity
- Edible salt (table salt)
- Soap
- Salting the earth
References
This article incorporates public domain material from the United States Geological Survey document: "Salt".
- ^ http://chem.sis.nlm.nih.gov/chemidplus/rn/7647-14-5
- ^ Wells, John C. (2008), Longman Pronunciation Dictionary (3rd ed.), Longman, pp. 143 and 755, ISBN 9781405881180 .
- ^ Sirdeshmukh, Dinker B.; Sirdeshmukh, Lalitha and Subhadra, K. G. (2001). Alkali halides: a handbook of physical properties. Springer. pp. 65, 68. ISBN 3-540-42180-7.
- ^ Burgess, J. (1978). Metal Ions in Solution. New York: Ellis Horwood. ISBN 0-85312-027-7.
- ^ Lincoln, S. F.; Richens, D. T. and Sykes, A. G. (2003) "Metal Aqua Ions" Comprehensive Coordination Chemistry II Volume 1, pp. 515–555. doi:10.1016/B0-08-043748-6/01055-0
- ^ a b Elvers, B. et al. (ed.) (1991) Ullmann's Encyclopedia of Industrial Chemistry, 5th ed. Vol. A24, Wiley, p. 319, ISBN 978-3-527-20124-2.
- ^ Zhang, W.; Oganov, A. R.; Goncharov, A. F.; Zhu, Q.; Boulfelfel, S. E.; Lyakhov, A. O.; Stavrou, E.; Somayazulu, M.; Prakapenka, V. B.; Konôpková, Z. (2013). "Unexpected Stable Stoichiometries of Sodium Chlorides". Science 342 (6165): 1502–1505. doi:10.1126/science.1244989. PMID 24357316. edit
- ^ Mason, B. J. (2006). "The role of sea-salt particles as cloud condensation nuclei over the remote oceans". The Quarterly Journal of the Royal Meteorological Society 127 (576): 2023–32. doi:10.1002/qj.49712757609.
- ^ a b c d e f g h i j k l Dennis S. Kostick Salt, U.S. Geological Survey, 2008 Minerals Yearbook
- ^ Salt, U.S. Geological Survey
- ^ a b c d Westphal, Gisbert et al. (2002) "Sodium Chloride" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim doi:10.1002/14356007.a24_317.pub4
- ^ Rastogi, Nina Does road salt harm the environment? slate.com (2010-02-16)
- ^ McCarron, David A. (2008). "Dietary sodium and cardiovascular and renal disease risk factors: dark horse or phantom entry?". Nephrol Dial Transplant 23 (7): 2133–7. doi:10.1093/ndt/gfn312. PMC 2441768. PMID 18587159.
- ^ Osanai T, Fujiwara N, Saitoh M, et al. (2002). "Relationship between salt intake, nitric oxide and asymmetric dimethylarginine and its relevance to patients with end-stage renal disease". Blood Purif. 20 (5): 466–8. doi:10.1159/000063555. PMID 12207094.
External links
|
Wikimedia Commons has media related to Sodium chloride. |
- The Salt Manufacturers Association website
- Salt United States Geological Survey Statistics and Information
- "Using Salt and Sand for Winter Road Maintenance". Road Management Journal. December 1997.
- Calculators: surface tensions, and densities, molarities and molalities of aqueous NaCl (and other salts)
- vapour pressure of NaCl solution
- JtBaker MSDS
|
Sodium compounds
|
|
- NaAlO2
- NaBH4
- NaBH3(CN)
- NaBO2
- NaBiO3
- NaBr
- NaBrO
- NaBrO3
- NaCH3COO
- NaC6H5CO2
- NaC6H4(OH)CO2
- NaCN
- NaCl
- NaClO
- NaClO2
- NaClO3
- NaClO4
- NaF
- NaFO
- Na2FeO4
- NaH
- NaHCO3
- NaH2PO4
- NaHSO3
- NaHSO4
- NaI
- NaIO3
- NaIO4
- Na5IO6
- NaMnO4
- NaN3
- NaNH2
- NaNO2
- NaNO3
- NaOCN
- NaO2
- NaO3
- NaOH
- NaPO2H2
- NaReO4
- NaSCN
- NaSH
- NaTcO4
- NaVO3
- Na2CO2
- Na2CO3
- Na4CO4
- Na2C2O4
- Na2CrO4
- Na2Cr2O7
- Na2GeO3
- Na2MnO4
- Na3MnO4
- Na2MoO4
- Na2MoS4
- Na2N2O2
- Na2O
- Na2O2
- Na2O(UO3)2
- Na2PO3F
- Na2S
- Na2SO3
- Na2SO4
- Na2S2O3
- Na2S2O4
- Na2S2O5
- Na2S2O6
- Na2S2O7
- Na2S2O8
- Na2Se
- Na2SeO3
- Na2SeO4
- Na2SiO3
- Na2Si2O5
- Na4SiO4
- Na2Te
- Na2TeO3
- Na2Po
- Na2Ti3O7
- Na2U2O7
- NaWO4
- Na2Zn(OH)4
- Na3N
- Na3P
- Na3PO4
- Na3VO4
- Na4Fe(CN)6
- Na4P3O7
- Na5P3O10
|
|
|
Chemical formulas
|
|
|
Molecules detected in outer space
|
|
| Molecules |
|
|
Deuterated
molecules |
- Ammonia
- Ammonium ion
- Formaldehyde
- Formyl radical
- Heavy water
- Hydrogen cyanide
- Hydrogen deuteride
- Hydrogen isocyanide
- Methylacetylene
- N2D+
- Trihydrogen cation
|
|
| Unconfirmed |
- Anthracene
- Dihydroxyacetone
- Ethyl methyl ether
- Glycine
- Graphene
- H2NCO+
- Linear C5
- Naphthalene cation
- Phosphine
- Pyrene
- Silylidine
|
|
| Related |
- Abiogenesis
- Astrobiology
- Astrochemistry
- Atomic and molecular astrophysics
- Chemical formula
- Circumstellar envelope
- Cosmic dust
- Cosmic ray
- Cosmochemistry
- Diffuse interstellar band
- Extraterrestrial life
- Extraterrestrial liquid water
- Forbidden mechanism
- Helium hydride ion
- Homochirality
- Intergalactic dust
- Interplanetary medium
- Interstellar medium
- Iron–sulfur world theory
- Kerogen
- Life
- Organic compound
- Outer space
- PAH world hypothesis
- Panspermia
- Polycyclic aromatic hydrocarbon (PAH)
- RNA world hypothesis
- Spectroscopy
- Tholin
|
|
- Book:Chemistry
- Category:Astrochemistry
- Category:Molecules
- Portal:Astrobiology
- Portal:Chemistry
|
|
