deuterium isotope effect

• 重水素同位体効果

WordNet

1. act so as to bring into existence; "effect a change"
2. a symptom caused by an illness or a drug; "the effects of sleep loss"; "the effect of the anesthetic"
3. (of a law) having legal validity; "the law is still in effect" (同)force
4. the central meaning or theme of a speech or literary work (同)essence, burden, core, gist
5. an impression (especially one that is artificial or contrived); "he just did it for effect"
6. produce; "The scientists set up a shock wave" (同)effectuate, set_up
7. an isotope of hydrogen which has one neutron (as opposed to zero neutrons in hydrogen) (同)heavy_hydrogen
8. one of two or more atoms with the same atomic number but with different numbers of neutrons
9. property of a personal character that is portable but not used in business; "she left some of her personal effects in the house"; "I watched over their effects until they returned" (同)personal_effects

PrepTutorEJDIC

1. 〈C〉〈U〉『結果』 / 〈C〉〈U〉(…への)『効果』,効きめ,影響《+『on』(『upon』)+『名』》 / 〈C〉(色・音・形などの)印象,感銘 / 《複数形で》品物;身の回り品;動産,財産 / (結果として)…‘を'『もたらす』;〈目的など〉‘を'果たす,遂行する
2. 重水素(化学記号は『D』)
3. 同位元素,アイソトープ

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2015/08/27 20:57:44」(JST)

wiki en

[Wiki en表示]

An example of the kinetic isotope effect. In the reaction of methyl bromide with cyanide, the kinetic isotope effect of the carbon in the methyl group was found to be 1.082 ± 0.008.

The kinetic isotope effect (KIE) is the change in the rate of a chemical reaction when one of the atoms in the reactants is substituted with one of its isotopes. Formally, it is the ratio of rate constants for the reactions involving the light (k_L) and the heavy (k_H) isotopically substituted reactants:

Background

The kinetic isotope effect is considered to be one of the most essential and sensitive tools for the study of reaction mechanisms, the knowledge of which allows the improvement of the desirable qualities of the corresponding reactions. For example, kinetic isotope effects can be used to reveal whether a nucleophilic substitution reaction follows a unimolecular (S_N1) or bimolecular (S_N2) pathway.

In the reaction of methyl bromide and cyanide (shown in intro section), the observed methyl carbon kinetic isotope effect indicates an S_N2 mechanism. Depending on the pathway, different strategies may be used to stabilize the transition state of the rate-determining step of the reaction and improve the reaction rate and selectivity, which are important for industrial applications.

Isotopic rate changes are most pronounced when the relative mass change is greatest, since the effect is related to vibrational frequencies of the affected bonds. For instance, changing a hydrogen atom (H) to its isotope deuterium (D) represents a 100% increase in mass, whereas in replacing carbon-12 with carbon-13, the mass increases by only 8 percent. The rate of a reaction involving a C–H bond is typically 6–10 times faster than the corresponding C–D bond, whereas a ¹²C reaction is only 4 percent faster than the corresponding ¹³C reaction (even though, in both cases, the isotope is one atomic mass unit heavier).

Isotopic substitution can modify the rate of reaction in a variety of ways. In many cases, the rate difference can be rationalized by noting that the mass of an atom affects the vibrational frequency of the chemical bond that it forms, even if the electron configuration is nearly identical. Heavier isotopes will (classically) lead to lower vibration frequencies, or, viewed quantum mechanically, will have lower zero-point energy. With a lower zero-point energy, more energy must be supplied to break the bond, resulting in a higher activation energy for bond cleavage, which in turn lowers the measured rate (see, for example, the Arrhenius equation).

Classification

Primary kinetic isotope effects

A primary kinetic isotope effect may be found when a bond to the isotopically labeled atom is being formed or broken. For the previously mentioned nucleophilic substitution reactions, primary kinetic isotope effects have been investigated for both the leaving groups, the nucleophiles, and the α-carbon at which the substitution occurs. Interpretation of the leaving group kinetic isotope effects had been difficult at first due to significant contributions from temperature independent factors. Kinetic isotope effects at the α-carbon can be used to develop some understanding into the symmetry of the transition state in S_N2 reactions, although this kinetic isotope effect is less sensitive than what would be ideal, also due to contribution from non-vibrational factors.

Secondary kinetic isotope effects

A secondary kinetic isotope effect is observed when no bond to the isotopically substituted atom in the reactant is broken or formed in the rate-determining step of a reaction. By its definition, secondary kinetic isotope effects tend to be much smaller than primary kinetic isotope effects; however, since kinetic isotope effects can be calculated and measured to very high precision, secondary kinetic isotope effects are still very useful for elucidating reaction mechanisms.

For the aforementioned nucleophilic substitution reactions, secondary hydrogen kinetic isotope effects at the α-carbon provide a direct means to distinguish between S_N1 and S_N2 reactions. It has been found that S_N1 reactions typically lead to large secondary kinetic isotope effects, approaching to their theoretical maximum at about 1.22, while S_N2 reactions typically yield kinetic isotope effects that are very close to or less than unity. Kinetic isotope effects that are greater than 1 are referred to as normal kinetic isotope effects, while kinetic isotope effects that are less than one are referred to as inverse kinetic isotope effects. In general, smaller force constants in the transition state are expected to yield a normal kinetic isotope effect, and larger force constants in the transition state are expected to yield an inverse kinetic isotope effect when stretching vibrational contributions dominate the kinetic isotope effect.

The magnitudes of such secondary isotope effects at the α-carbon are largely determined by the C_α-H(D) vibrations. For an S_N1 reaction, since the carbon is converted into an sp² hybridized carbenium ion during the transition state for the rate-redermining step with an increase in C_α-H(D) bond order, an inverse kinetic isotope effect would be expected if only the stretching vibrations were important. The observed large normal kinetic isotope effects are found to be caused by significant out-of-plane bending vibrational contributions when going from the reactants to the transition state of carbenium formation. For S_N2 reactions, bending vibrations still play an important role for the kinetic isotope effect, but stretching vibrational contributions are of more comparable magnitude, and the resulting kinetic isotope effect may be normal or inverse depending on the specific contributions of the respective vibrations.

Theory

The theoretical treatment of isotope effects relies heavily on transition state theory, which assumes a single potential energy surface for the reaction, and a barrier between the reactants and the products on this surface, on top of which resides the transition state. The kinetic isotope effect arises largely from the changes which the isotopic perturbation produces along the minimum energy pathway on this reaction energy surface, which may only be accounted for with quantum mechanical treatments of the system. Depending on the mass and energy of the reacting species, quantum mechanical tunneling may also make a large contribution to an observed kinetic isotope effect.

Of the various theoretical treatments of kinetic isotope effects, Bigeleisen's seems to be the most popular. His basic general equation for the hydrogen/deuterium kinetic isotope effects is given below, neglecting tunnelling contributions which can be introduced as a separate factor. The subscripts H and D refer to hydrogen and deuterium substituted substrates, respectively.

$\begin{align} \frac{k_H}{k_D} = &\left(\frac{s^\ddagger_H s_D}{s^\ddagger_D s_H} \right) \left(\frac{M^\ddagger_H M_D}{M^\ddagger_D M_H}\right)^{3/2}\left(\frac{I^\ddagger_{AH}I^\ddagger_{BH}I^\ddagger_{CH}}{I^\ddagger_{AD}I^\ddagger_{BD}I^\ddagger_{CD}}\frac{I_{AD}I_{BD}I_{CD}}{I_{AH}I_{BH}I_{CH}}\right)^{1/2} \\ &\times \left(\frac{\prod\limits_{i=1}^{3N^\ddagger -7}\frac{1-e^{-u^\ddagger_{iD}}}{1-e^{-u^\ddagger_{iH}}}}{\prod\limits_{i=1}^{3N -6}\frac{1-e^{-u_{iH}}}{1-e^{-u_{iD}}}} \right) e^{-1/2(\sum\limits_{i=1}^{3N^\ddagger-7}(u^\ddagger_{iH}-u^\ddagger_{iD})-\sum\limits_{i=1}^{3N-6}(u_{iH}-u_{iD}))} \end{align}$

The S factors are the symmetry numbers for the reactants and transition states. The M factors are the molecular masses of the corresponding species, and the I factors are the moments of inertia about the three principal axes. The u_i factors are determined from the corresponding vibrational frequencies, ν_i, through u_i = h ν_i/kT. N and N^‡ are the number of atoms in the reactants and the transition states, respectively. The complex expression given above can be represented as the product of four separate factors, as shown below, from which some possible simplifications for hydrogen/deuterium kinetic isotope effects can be more easily seen.

The S factor is the ratio of the symmetry numbers for the various species. These symmetry numbers do not lead to isotopic fractionation, so the S factor can be set to be 1.000. The MMI factor refers to the ratio of the molecular masses and the moments of inertia. Since hydrogen and deuterium tend to be much lighter compared to most reactants and transition states, the MMI factor is usually also approximated as unity. The EXC factor corrects for the kinetic isotope effect caused by the reactions of vibrationally excited molecules. The contribution of this factor is also negligible when the reactions are carried out at or near room temperature. Hence, for hydrogen/deuterium kinetic isotope effects, the observed values are typically governed by the zero-point energy contributions, which can be represented as follows:

$\begin{align} \frac{k_H}{k_D} &\cong e^{-1/2\{\sum\limits_{i=1}^{3N^\ddagger-7}(u^\ddagger_{iH}-u^\ddagger_{iD})-\sum\limits_{i=1}^{3N-6}(u_{iH}-u_{iD})\}} \\ & = e^{1/2\{ \sum\limits_{i=1}^{3N-6}\Delta u_i - \sum\limits_{i=1}^{3N^\ddagger-7}\Delta u^\ddagger_i \}} \end{align}$

If the zero-point energy difference between the stretching vibrations of a carbon-hydrogen and carbon-deuterium bond is allowed to disappear in the transition state, the expression given above predicts a maximum for k_H/k_D as 6.9. If the weakening of two bending vibrations are also taken into account, k_H/k_D values as large as 15-20 can be predicted. Bending frequencies are very unlikely to vanish in the transition state, however, and quite few k_H/k_D values exceed 7-8 near room temperature. Furthermore, it is often found that tunneling is a major factor when they do exceed such values. Hence, more often than not, weakening of bending frequencies is not an important cause of large kinetic isotope effects.

For isotope effects involving elements other than hydrogen, most of these simplifications are not valid, and may depend largely on some of the neglected factors. In many cases and especially for hydrogen-transfer reactions, contributions to kinetic isotope effects from tunneling are significant (see below).

As mentioned, especially for hydrogen/deuterium substitution, most kinetic isotope effects arise from the difference in zero-point energy (ZPE) between the reactants and the transition state of the isotopologues in question, and this difference can be understood qualitatively with the following description: within the Born–Oppenheimer approximation, the potential energy curve is the same for both isotopic species. However, a quantum-mechanical treatment of the energy introduces discrete vibrational levels onto this curve, and the lowest possible energy state of a molecule corresponds to the lowest vibrational energy level, which is slightly higher in energy than the minimum of the potential energy curve. This difference, referred to as the zero-point energy, is a manifestation of the Heisenberg uncertainty principle that necessitates an uncertainty in the C-H or C-D bond length. Since the heavier (in this case the deuterated) species behaves more "classically," its vibrational energy levels are closer to the classical potential energy curve, and it has a lower zero-point energy. The zero-point energy differences between the two isotopic species, at least in most cases, diminish in the transition state, since the bond force constant decreases during bond breaking. Hence, the lower zero-point energy of the deuterated species translates into a larger activation energy for its reaction, as shown in the following figure,leading to a normal kinetic isotope effect.

ZPE energy differences and corresponding differences in the activation energies for the breaking of analogous C-H and C-D bonds

The following simple expressions relating deuterium and tritium kinetic isotope effects, which are also known as the Swain equation (or the Swain-Schaad-Stivers equations), can be derived from the general expression given above using some simplifications:

i.e.,

In deriving these expressions, symmetry terms are omitted. The subscript "s" refers to these "semiclassical" kinetic isotope effects, which disregard quantum tunneling. Tunneling contributions must be treated separately as a correction factor.

Tunneling

In some cases, an additional rate enhancement is seen for the lighter isotope, possibly due to quantum mechanical tunnelling. This is typically only observed for reactions involving bonds to hydrogen atoms. Tunneling occurs when a molecule penetrates through a potential energy barrier rather than over it. Although not allowed by the laws of classical mechanics, particles can pass through classically forbidden regions of space in quantum mechanics based on wave–particle duality.

The potential energy well of a tunneling reaction. The dash-red arrow shows the classical activated process, while the red arrow shows the tunneling path.

Analysis of tunneling can be made using Bell's modification of the Arrhenius equation, which includes the addition of a tunneling factor, Q:

where A is the Arrhenius parameter, E is the barrier height and

where and

Examination of the β term shows exponential dependency on the mass of the particle. As a result, tunneling is much more likely for a lighter particle such as hydrogen. Simply doubling the mass of a tunneling proton by replacing it with its deuterium isotope drastically reduces the rate of such reactions. As a result, very large kinetic isotope effects are observed that can not be accounted for by differences in zero point energies.

Donor-Acceptor Model of a proton transfer.

In addition, the β term depends linearly with barrier width, 2a. As with mass, tunneling is greatest for small barrier widths. Optimal tunneling distances of protons between donor and acceptor atom is 0.4 Å.

  Temperature dependence in tunneling

Tunneling is a quantum mechanical effect tied to the laws of wave mechanics, not kinetics. Therefore, tunneling tends to become more important at low temperatures, where even the smallest kinetic energy barriers may not be overcome but can be tunneled through.

Peter S. Zuev et al. reported rate constants for the ring expansion of 1-methylcyclobutylfluorocarbene to be 4.0 x 10⁻⁶/s in nitrogen and 4.0 x 10⁻⁵/s in argon at 8 kelvin. They calculated that at 8 kelvin, the reaction would proceed via a single quantum state of the reactant so that the reported rate constant is temperature independent and the tunneling contribution to the rate was 152 orders of magnitude greater than the contribution of passage over the transition state energy barrier.

So despite the fact that conventional chemical reactions tend to slow down dramatically as the temperature is lowered, tunneling reactions rarely change at all. Particles that tunnel through an activation barrier are a direct result of the fact that the wave function of an intermediate species, reactant or product is not confined to the energy well of a particular trough along the energy surface of a reaction but can "leak out" into the next energy minimum. In light of this, tunneling should be temperature independent.

For the hydrogen abstraction from gaseous n-alkanes and cycloalkanes by hydrogen atoms over the temperature range 363–463 K, the H/D kinetic isotope effect data were characterized by small preexponential factor ratios A_H/A_D ranging from 0.43 to 0.54 and large activation energy differences from 9.0 to 9.7 kJ/mol. Basing their arguments on transition state theory, the small A factor ratios associated with the large activation energy differences (usually about 4.5 kJ/mol for C–H(D) bonds) provided strong evidence for tunneling. For the purpose of this discussion, it is important is that the A factor ratio for the various paraffins they used was approximately constant throughout the temperature range.

The observation that tunneling is not entirely temperature independent can be explained by the fact that not all molecules of a certain species occupy their vibrational ground state at varying temperatures. Adding thermal energy to a potential energy well could cause higher vibrational levels other than the ground state to become populated. For a conventional kinetically driven reaction, this excitation would only have a small influence on the rate. However, for a tunneling reaction, the difference between the zero point energy and the first vibrational energy level could be huge. The tunneling correction term Q is linearly dependent on barrier width and this width is significantly diminished as the number vibrational modes on the Morse potential increase. The decrease of the barrier width can have such a huge impact on the tunneling rate that even a small population of excited vibrational states would dominate this process.

  Criteria for KIE tunneling

To determine if tunneling is involved in KIE of a reaction with H or D, a few criteria are considered:
1.Δ(E_a^H-E_a^D) > Δ(ZPE^H-ZPE^D) (E_a=activation energy; ZPE=zero point energy)
2.Reaction still proceeds at lower temperatures.
3.The Arrhenius pre-exponential factors A_D/A_H is not equal to 1.
4.A large negative entropy of activation.
5.The geometries of the reactants and products are usually very similar.

Also for reactions where isotopes include H, D and T, a criterion of tunneling is the Swain-Schaad relations which compare the rate constants (k) of the reactions where H,D or T are exchanged: k_H/k_T=(k_D/k_T)^X and k_H/k_T=(k_H/k_D)^Y

Experimental values of X exceeding 3.26 and Y lower than 1.44 are evidence of a certain amount of contribution from tunneling.

  Examples for tunneling in KIE

In organic reactions, this proton tunneling effect has been observed in such reactions as the deprotonation and iodination of nitropropane with hindered pyridine base with a reported KIE of 25 at 25 °C:

and in a 1,5-sigmatropic hydrogen shift although it is observed that it is difficult to extrapolate experimental values obtained at elevated temperatures to lower temperatures:

It has long been speculated that high efficiency of enzyme catalysis in proton or hydride ion transfer reactions could be due partly to the quantum mechanical tunneling effect. Environment at the active site of an enzyme positions the donor and acceptor atom close to the optimal tunneling distance, where the amino acid side chains can "force" the donor and acceptor atom closer together by electrostatic and noncovalent interactions. It is also possible that the enzyme and its unusual hydrophobic environment inside a reaction site provides tunneling-promoting vibration. Studies on ketosteroid isomerase have provided experimental evidence that the enzyme actually enhances the coupled motion/hydrogen tunneling by comparing primary and secondary kinetic isotope effects of the reaction under enzyme catalyzed and non-enzyme catalyzed conditions.

Many examples exist for proton tunneling in enzyme catalyzed reactions that were discovered by KIE. A well studied example is methylamine dehydrogenase, where large primary KIEs of 5–55 have been observed for the proton transfer step.

Mechanism of methylamine dehydrogenase, the quinoprotein converts primary amines to aldehyde and ammonia.

Another example of tunneling contribution to proton transfer in enzymatic reactions is the reaction carried out by alcohol dehydrogenase. Competitive KIEs for the hydrogen transfer step at 25 °C resulted in 3.6 and 10.2 for primary and secondary KIEs, respectively.

Mechanism of alcohol dehydrogenase. The rate limiting step is the proton transfer

Transient kinetic isotope effect

Main article: Transient kinetic isotope fractionation

Isotopic effect expressed with the equations given above only refer to reactions that can be described with first-order kinetics. In all instances in which this is not possible, transient kinetic isotope effects should be taken into account using the GEBIK and GEBIF equations.

Kinetic isotope effect experiments

Simmons and Hartwig refer to the following three cases as the main types of kinetic isotope effect experiments involving C-H bond functionalization:

A) KIE determined from absolute rates of two parallel reactions

In this experiment, the rate constants for the normal substrate and its isotopically labeled analogue are determined independently, and the KIE is obtained as a ratio of the two. The accuracy of the measured KIE is severely limited by the accuracy with which each of these rate constants can be measured. Furthermore, reproducing the exact conditions in the two parallel reactions can be very challenging. Nevertheless, this measurement of the kinetic isotope effect is the only one that may tell that C-H bond cleavage occurs in the rate-determining step without a doubt.

B) KIE determined from an intermolecular competition

In this type of experiment, the same substrates that are used in Experiment A are employed, but they are allowed in to react in the same container, instead of two separate containers. The kinetic isotope effect from this experiment is determined by the relative amount of products formed from C-H versus C-D functionalization (or it can be inferred from the relative amounts of unreacted starting materials). It is necessary to quench the reaction before it goes to completion to observe the kinetic isotope effect (see the Evaluation section below). This experiment type ensures that both C-H and C-D bond functionalizations occur under exactly the same conditions, and the ratio of products from C-H and C-D bond functionalizations can be measured with much greater precision than the rate constants in Experiment A. Moreover, only a single measurement of product concentrations from a single sample is required. However, an observed kinetic isotope effect from this experiment is more difficult to interpret, since it may either mean that C-H bond cleavage occurs during the rate-determining step or at a product-determining step ensuing the rate-determining step. The absence of a kinetic isotope effect, at least according to Simmons and Hartwig, is nonetheless indicative of the C-H bond cleavage not occurring during the rate-determining step.

C) KIE determined from an intramolecular competition

This type of experiment is analogous to Experiment B, except this time there is an intramolecular competition for the C-H or C-D bond functionalization. In most cases, the substrate possesses a directing group (DG) between the C-H and C-D bonds. Calculation of the kinetic isotope effect from this experiment and its interpretation follow the same considerations as that of Experiment B.

Apart from the differences in feasibility and precision between the different kinds of experiments, they may also differ in terms of the information they may provide. For example, if a reaction follows the following energy profile, all three experiments will yield a significant primary kinetic isotope effect:

Reaction energy profile for when C-H cleavage occurs at the RDS

On the other hand, if a reaction follows the following energy profile, in which the C-H or C-D bond cleavage is irreversible but occurs after the rate-determining step (RDS), no significant kinetic isotope effect will be observed with Experiment A, since the overall rate is not affected by the isotopic substitution. Nevertheless, the irreversible C-H bond cleavage step will give a primary kinetic isotope effect with the other two experiments, since the second step would still affect the product distribution. Therefore, with Experiments B and C, it is possible to observe the kinetic isotope effect even if C-H or C-D bond cleavage occurs not in the rate-determining step, but in the product-determining step.

Reaction energy profile for when the C-H bond cleavage occurs at a product-determining step after the RDS

  Evaluation of Kinetic Isotope Effects in a Hypothetical Multi-Step Reaction

A large part of the kinetic isotope effect arises from vibrational zero-point energy differences between the reactant ground state and the transition state that vary between the reactant and its isotopically substituted analogue. While it is possible to carry involved calculations of kinetic isotope effects using computational chemistry, much of the work done is of simpler order that involves the investigation of whether particular isotopic substitutions produce a detectable kinetic isotope effect or not. Vibrational changes from isotopic substitution at atoms away from the site where the reaction occurs tend to cancel between the reactant and the transition state. Therefore, the presence of a kinetic isotope effect indicates that the isotopically labeled atom is at or very near the reaction site.

The absence of an isotope effect is more difficult to interpret: It may mean that the isotopically labeled atom is away from the reaction site, but it may also mean that there are certain compensating effects that lead to the lack of an observable kinetic isotope effect. For example, the differences between the reactant and the transition state zero-point energies may be identical between the normal reactant and its isotopically labeled version. Alternatively, it may mean that the isotopic substitution is at the reaction site, but vibrational changes associated with bonds to this atom occur after the rate-determining step. Such a case is illustrated in the following example, in which ABCD represents the atomic skeleton of a molecule.

Assuming steady state conditions for the intermediate ABC, the overall rate of reaction is the following:

If the first step is rate-determining, this equation reduces to:

Or if the second step is rate-determining, the equation reduces to:

In most cases, isotopic substitution at A, especially if it is a heavy atom, will not alter k₁ or k₂, but it will most probably alter k₃. Hence, if the first step is rate-determining, there will not be an observable kinetic isotope effect in the overall reaction with isotopic labeling of A, but there will be one if the second step is rate-determining. For intermediate cases where both steps have comparable rates, the magnitude of the kinetic isotope effect will depend on the ratio of k₃ and k₂.

Isotopic substitution of D will alter k₁ and k₂ while not affecting k₃. The kinetic isotope effect will always be observable with this substitution since k₁ appears in the simplified rate expression regardless of which step is rate-determining, but it will be less pronounced if the second step is rate-determining due to some cancellation between the isotope effects on k₁ and k₂. This outcome is related to the fact that equilibrium isotope effects are usually smaller than kinetic isotope effects.

Isotopic substitution of B will clearly alter k₃, but it may also alter k₁ to a lesser extent if the B-C bond vibrations are affected in the transition state of the first step. There may thus be a small isotope effect even if the first step is rate-determining.

This hypothetical consideration reveals how observing kinetic isotope effects may be used to investigate reaction mechanisms. The existence of a kinetic isotope effect is indicative of a change to the vibrational force constant of a bond associated with the isotopically labeled atom at or before the rate-controlling step. Intricate calculations may be used to learn a great amount of detail about the transition state from observed kinetic isotope effects. More commonly, though, the mere qualitative knowledge that a bond associated with the isotopically labeled atom is altered in a certain way can be very useful.

Evaluation of Rate Constant Ratios from Intermolecular Competition Reactions

In competition reactions, the kinetic isotope effect is calculated from isotopic product or remaining reactant ratios after the reaction, but these ratios depend strongly on the extent of completion of the reaction. Most commonly, the isotopic substrate will consist of molecules labeled in a specific position and their unlabeled, ordinary counterparts. It is also possible in case of ¹³C kinetic isotope effects, as well as similar cases, to simply rely on the natural abundance of the isotopic carbon for the kinetic isotope effect experiments, eliminating the need for isotopic labeling. The two isotopic substrates will react through the same mechanism, but at different rates. The ratio between the amounts of the two species in the reactants and the products will thus change gradually over the course of the reaction, and this gradual change can be treated in the following manner: Assume that two isotopic molecules, A₁ and A₂, undergo irreversible competition reactions in the following manner:

The kinetic isotope effect for this scenario is found to be:

Where F₁ and F₂ refer to the fraction of conversions for the isotopic species A₁ and A₂, respectively.

  Evaluation

In this treatment, all other reactants are assumed to be non-isotopic. Assuming further that the reaction is of first order with respect to the isotopic substrate A, the following general rate expression for both these reactions can be written:

Since f([B],[C],…) does not depend on the isotopic composition of A, it can be solved for in both rate expressions with A₁ and A₂, and the two can be equated to derive the following relations:

Where [A₁]⁰ and [A₂]⁰ are the initial concentrations of A₁ and A₂, respectively. This leads to the following kinetic isotope effect expression:

Which can also be expressed in terms of fraction amounts of conversion of the two reactions, F₁ and F₂, where 1-F_n=[A_n]/[A_n]⁰ for n = 1 or 2, as follows:

Relation between the fractions of conversion for the two competing reactions with isotopic substrates. The rate constant ratio k₁/k₂ (KIE) is varied for each curve.

As for obtaining the kinetic isotope effects, mixtures of substrates containing stable isotopes may be analyzed using a mass spectrometer, which yields the ratios of the isotopic molecules in the initial substrate (defined here as [A₂]⁰/[A₁]⁰=R₀), in the substrate after some conversion ([A₂]/[A₁]=R), or in the product ([P₂]/[P₁]=R_P). When one of the species, e.g. 2, is a radioactive isotope, its mixture with the other species can also be analyzed by its radioactivity, which is measured in molar activities that are proportional to [A₂]⁰ / ([A₁]⁰+[A₂]⁰) ≈ [A₂]⁰/[A₁]⁰ = R₀ in the initial substrate, [A₂] / ([A₁]+[A₂]) ≈ [A₂]/[A₁] = R in the substrate after some conversion, and [R₂] / ([R₁]+[R₂]) ≈ [R₂]/[R₁] = R_P, so that the same ratios as in the other case can be measured as long as the radioactive isotope is present in tracer amounts. Such ratios may also be determined using NMR spectroscopy.

When the substrate composition is followed, the following kinetic isotope effect expression in terms of R₀ and R can be derived:

  Measurement of F₁ in terms of weights per unit volume or molarities of the reactants

Taking the ratio of R and R₀ using the previously derived expression for F₂, one gets:

This relation can be solved in terms of the kinetic isotope effect to obtain the KIE expression given above. When the uncommon isotope has very low abundance, both R₀ and R are very small and not significantly different from each other, such that 1-F₁ can be approximated with m/m₀ or c/c₀.

Isotopic enrichment of the starting material can be calculated from the dependence of R/R₀ on F₁ for various kinetic isotope effects, yielding the following figure. Because of the exponential dependence, even very low kinetic isotope effects lead to large changes in isotopic composition of the starting material at high conversions.

The isotopic enrichment of the relative amount of species 2 with respect to species 1 in the starting material as a function of conversion of species 1. The value of the kinetic isotope effect (k₁/k₂) is indicated at each curve.

When the products are followed, the kinetic isotope effect can be calculated using the products ratio R_P along with R₀ as follows:

Case studies

Primary hydrogen isotope effects

Primary hydrogen kinetic isotope effects refer to cases in which a bond to the isotopically labeled hydrogen is formed or broken in the rate-determining step of the reaction. These are the most commonly measured kinetic isotope effects, and much of the previously covered theory refers to primary kinetic isotope effects. When there is adequate evidence that transfer of the labeled hydrogen occurs in the rate-determining step of a reaction, if a fairly large kinetic isotope effect is observed, e.g. kH/kD of at least 5-6 or kH/kT about 10-13 at room temperature, it is quite likely that the hydrogen transfer is linear and that the hydrogen is fairly symmetrically located in the transition state. It is usually not possible to make comments about tunneling contributions to the observed isotope effect unless the effect is very large. If the primary kinetic isotope effect is not as large, it is generally considered to be indicative of a significant contribution from heavy-atom motion to the reaction coordinate, although it may also mean that hydrogen transfer follows a nonlinear pathway.

Secondary hydrogen isotope effects

The secondary hydrogen isotope effects or secondary kinetic isotope effect (SKIE) arises in cases where the isotopic substitution is remote from the bond being broken. The remote atom, nonetheless, influences the internal vibrations of the system that via changes in the zero point energy (ZPE) affect the rates of chemical reactions. Such effects are expressed as ratios of rate for the light isotope to that of the heavy isotope and can be "normal" (ratio is greater than or equal to 1) or "inverse" (ratio is less than 1) effects. SKIE are defined as α,β (etc.) secondary isotope effects where such prefixes refer to the position of the isotopic substitution relative to the reaction center (see alpha and beta carbon). The prefix α refers to the isotope associated with the reaction center while the prefix β refers to the isotope associated with an atom neighboring the reaction center and so on.

In physical organic chemistry, SKIE is discussed in terms of electronic effects such as induction, bond hybridization, or hyperconjugation. These properties are determined by electron distribution, and depend upon vibrationally averaged bond length and angles that are not greatly affected by isotopic substitution. Thus, the use of the term "electronic isotope effect" while legitimate is discouraged from use as it can be misinterpreted to suggest that the isotope effect is electronic in nature rather than vibrational.

SKIE's can be explained in terms of changes in orbital hybridization. When the hybridization of a carbon atom changes from sp³ to sp², a number of vibrational modes (stretches, in-plane and out-of-plane bending) are affected. The in-plane and out-of-plane bending in an sp³ hybridized carbon are similar in frequency due to the symmetry of an sp³ hybridized carbon. In an sp² hybridized carbon the in-plane bend is much stiffer than the out-of-plane bending resulting in a large difference in the frequency, the ZPE and thus the SKIE (which exists when there is a difference in the ZPE of the reactant and transition state). The theoretical maximum change caused by the bending frequency difference has been calculated as 1.4.

When carbon undergoes a reaction that changes its hybridization from sp³ to sp², the out of plane bending force constant at the transition state is weaker as it is developing sp² character and a "normal" SKIE is observed with typical values of 1.1 to 1.2. Conversely, when carbon's hybridization changes from sp² to sp³, the out of plane bending force constants at the transition state increase and an inverse SKIE is observed with typical values of 0.8 to 0.9.

More generally the SKIE for reversible reactions can be "normal" one way and "inverse" the other if bonding in the transition state is midway in stiffness between substrate and product, or they can be "normal" both ways if bonding is weaker in the transition state, or "inverse" both ways if bonding is stronger in the transition state than in either reactant.

An example of an "inverse" α secondary kinetic isotope effect can be seen in the work of Fitzpatrick and Kurtz who used such an effect to distinguish between two proposed pathways for the reaction of d-amino acid oxidase with nitroalkane anions. Path A involved a nucleophilic attack on the coenzyme FAD, while path B involves a free-radical intermediate. As path A results in the intermediate carbon changing hybridization from sp² to sp³ an "inverse" a SKIE is expected. If path B occurs then no SKIE should be observed as the free radical intermediate does not change hybridization. An SKIE of 0.84 was observed and Path A verified as shown in the scheme below.

Another example of a SKIE is the oxidation of benzyl alcohols by dimethyldioxirane where three transition states for different mechanisms were proposed. Again, by considering how and if the hydrogen atoms were involved in each, researchers predicted whether or not they would expect an effect of isotopic substitution of them. Then, analysis of the experimental data for the reaction allowed them to choose which pathway was most likely based on the observed isotope effect.

Secondary hydrogen isotope effects from the methylene hydrogens were also used to show that Cope rearrangement in 1,5-hexadiene follow a concerted bond rearrangement pathway, and not one of the alternatively proposed allyl radical or 1,4-diyl pathways, all of which are presented in the following scheme.

Alternative mechanisms for the Cope rearrangement of 1,5-hexadiene: (from top to bottom), allyl radical, synchronous concerted, and 1,4-dyil pathways. The middle pathway is found to be the predominant one.

Steric isotope effects

The steric isotope effect is a SKIE that does not involve bond breaking or formation. This effect is attributed to the different vibrational amplitudes of isotopologues. An example of such an effect is the racemization of 9,10-dihydro-4,5-dimethylphenanthrene. The smaller amplitude of vibration for deuterium as compared to hydrogen in C–H (carbon–hydrogen), C–D (carbon–deuterium) bonds results in a smaller van der Waals radius or effective size in addition to a difference in the ZPE between the two. When there is a greater effective bulk of molecules containing one over the other this may be manifested by a steric effect on the rate constant. For the example above deuterium racemizes faster than the hydrogen isotopologue resulting in a steric isotope effect.

Another example of the steric isotope effect is in the deslipping reaction of rotaxanes. The deuterium isotope, due to its smaller effective size, allows easier passage of the stoppers through the macrocycle, resulting in faster rates of deslipping for the deuterated rotaxanes.

Inverse kinetic isotope effects

Reactions are known where the deuterated species reacts faster than the undeuterated analogue, and these cases are said to exhibit inverse kinetic isotope effects (IKIE). IKIE's are often observed in the reductive elimination of alkyl metal hydrides, e.g. (Me₂NCH₂CH₂NMe₂)PtMe(H). In such cases the C-D bond in the transition state, an agostic species, is highly stabilized relative to the C–H bond.

Solvent hydrogen kinetic isotope effects

For the solvent isotope effects to be measurable, a finite fraction of the solvent must have a different isotopic composition than the rest. Therefore, large amounts of the less common isotopic species must be available, limiting observable solvent isotope effects to isotopic substitutions involving hydrogen. Detectable kinetic isotope effects occur only when solutes exchange hydrogen with the solvent or when there is a specific solute-solvent interaction near the reaction site. Both such phenomena are common for protic solvents, in which the hydrogen is exchangeable, and they may form dipole-dipole interactions or hydrogen bonds with polar molecules.

Carbon-13 isotope effects

Most organic reactions involve the breaking and making of bonds to a carbon; thus, it is reasonable to expect detectable carbon isotope effects. When ¹³C is used as the label, the change in mass of the isotope is only ~8%, though, which limits the observable kinetic isotope effects to much smaller values than the ones observable with hydrogen isotope effects.

Compensating for variations in ¹³C natural abundance

Often, the largest source of error in a study that depends on the natural abundance of carbon is the slight variation in natural ¹³C abundance itself. Such variations arise because the starting materials used in the reaction are themselves products of some other reactions that have kinetic isotope effects and corresponding isotopic enrichments in the products. To compensate for this error when NMR spectroscopy is used to determine the kinetic isotope effect, the following guidelines have been proposed:

• Choose a carbon that is remote from the reaction center that will serve as a reference and assume it does not have a kinetic isotope effect in the reaction.
• In the starting material that has not undergone any reaction, determine the ratios of the other carbon NMR peak integrals to that of the reference carbon.
• Obtain the same ratios for the carbons in a sample of the starting material after it has undergone some reaction.
• The ratios of the latter ratios to the former ratios yields R/R₀.

If these as well as some other precautions listed by Jankowski are followed, kinetic isotope effects with precisions of three decimal places can be achieved.

Isotope effects with elements heavier than carbon

Interpretation of carbon isotope effects are usually complicated by simultaneously forming and breaking bonds to carbon. Even reactions that involve only bond cleavage from the carbon, such as S_N1 reactions, involve strengthening of the remaining bonds to carbon. In many such reactions, leaving group isotope effects tend to be easier to interpret. For example, substitution and elimination reactions in which chlorine act as a leaving group are convenient to interpret, especially since chlorine acts as a monatomic species with no internal bonding to complicate the reaction coordinate, and it has two stable isotopes, ³⁵Cl and ³⁷Cl, both with high abundance. The major challenge to the interpretation of such isotope affects is the solvation of the leaving group.

Owing to experimental uncertainties, measurement of isotope effect may entail significant uncertainty. Often isotope effects are determined through complementary studies on a series of isotopomers. Accordingly, it is quite useful to combine hydrogen isotope effects with heavy-atom isotope effects. For instance, determining nitrogen isotope effect along with hydrogen isotope effect was used to show that the reaction of 2-phenylethyltrimethylammonium ion with ethoxide in ethanol at 40^oC follows an E2 mechanism, as opposed to alternative non-concerted mechanisms. This conclusion was reached upon showing that this reaction yields a nitrogen isotope effect, k₁₄/k₁₅, of 1.0133±0.0002 along with a hydrogen kinetic isotope effect of 3.2 at the leaving hydrogen.

Similarly, combining nitrogen and hydrogen isotope effects was used to show that syn eliminations of simple ammonium salts also follow a concerted mechanism, which was a question of debate before. In the following two reactions of 2-phenylcyclopentyltrimethylammonium ion with ethoxide, both of which yield 1-phenylcyclopentene, both isomers exhibited a nitrogen isotope effect k₁₄/k₁₅ at 60^oC. Although the reaction of the trans isomer, which follows syn elimination, has a smaller nitrogen kinetic isotope effect (1.0064) compared to the cis isomer which undergoes anti elimination (1.0108), both results are large enough to be indicative of weakening of the C-N bond in the transition state that would occur in a concerted process.

Other Examples

Since kinetic isotope effects arise from differences in isotopic masses, the largest observable kinetic isotope effects are associated with isotopic substitutions of hydrogen with deuterium (100% increase in mass) or tritium (300% increase in mass). Kinetic isotope effects from isotopic mass ratios can be as large as 36.4 using muons. They have produced the lightest hydrogen atom, ^0.11H (0.113 amu), in which an electron orbits around a positive muon (μ⁺) "nucleus" that has a mass of 206 electrons. They have also prepared the heaviest hydrogen atom analogue by replacing one electron in helium with a negative muon (μ⁻) to form Heμ with an atomic mass of 4.116 amu. Since the negative muon is much heavier than an electron, it orbits much closer to the nucleus, effectively shielding one proton, making Heμ to behave as ^4.1H. With these exotic species, the reaction of H with ¹H₂ was investigated. Rate constants from reacting the lightest and the heaviest hydrogen analogues with ¹H₂ were then used to calculate the k_0.11/k_4.1 kinetic isotope effect, in which there is a 36.4 fold difference in isotopic masses. For this reaction, isotopic substitution happens to produce an inverse kinetic isotope effect, and the authors report a kinetic isotope effect as low as 1.74 x 10⁻⁴, which is the smallest kinetic isotope effect ever reported.

The kinetic isotope effect leads to a specific distribution of deuterium isotopes in natural products, depending on the route they were synthesized in nature. By NMR spectroscopy, it is therefore easy to detect whether the alcohol in wine was fermented from glucose, or from illicitly added saccharose.

Another reaction mechanisms that was elucidated using the kinetic isotope effect is the halogenation of toluene:

In this particular "intramolecular KIE" study, a benzylic hydrogen undergoes radical substitution by bromine using N-bromosuccinimide as the brominating agent. It was found that PhCH₃ brominates 4.86x faster than PhCD₃. A large KIE of 5.56 is associated with the reaction of ketones with bromine and sodium hydroxide.

In this reaction the rate-limiting step is formation of the enolate by deprotonation of the ketone. In this study the KIE is calculated from the reaction rate constants for regular 2,4-dimethyl-3-pentanone and its deuterated isomer by optical density measurements.

See also

• Effect of temperature on KIE
• Reaction mechanism
• Transient kinetic isotope fractionation
• Magnetic isotope effect
• Crossover experiment

References

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

• 1. 冠動脈疾患の診断および予後における運動負荷放射性核種心筋血流イメージング exercise radionuclide myocardial perfusion imaging in the diagnosis and prognosis of coronary heart disease
• 2. 慢性肝疾患における栄養評価 nutritional assessment in chronic liver disease
• 3. 小児の身体組成測定 measurement of body composition in children
• 4. 高プロラクチン血症の臨床症状および診断 clinical manifestations and diagnosis of hyperprolactinemia
• 5. 思春期における食物エネルギー所要量 dietary energy requirements in adolescents

English Journal

• Hydrogen atom transfer reactions of ferrate(vi) with phenols and hydroquinone. Correlation of rate constants with bond strengths and application of the Marcus cross relation.

• Xie J1, Ma L1, Lam WW1, Lau KC1, Lau TC1.
• Dalton transactions (Cambridge, England : 2003).Dalton Trans.2015 Nov 26. [Epub ahead of print]
• The oxidation of phenols by HFeO4- proceeds via a hydrogen atom transfer (HAT) mechanism, as evidenced by a large deuterium isotope effect and a linear correlation between the log(rate constant) and bond dissociation free energy (BDFE) of phenols. The Marcus cross relation has been applied to predic
• PMID 26610053

• A Revised Mechanism for Human Cyclooxygenase-2.

• Liu Y1, Roth J2.
• The Journal of biological chemistry.J Biol Chem.2015 Nov 12. pii: jbc.M115.668038. [Epub ahead of print]
• The mechanism of omega-6 polyunsaturated fatty acid oxidation by wild-type COX-2 and the Y334F variant, lacking a conserved tyrosine that hydrogen bond to the catalytic tyrosyl radical/tyrosine, was examined for the first time under physiologically relevant conditions. The enzymes show apparent bimo
• PMID 26565028

• Structural rearrangements preceding dioxygen formation by the water oxidation complex of photosystem II.

• Bao H1, Burnap RL2.
• Proceedings of the National Academy of Sciences of the United States of America.Proc Natl Acad Sci U S A.2015 Nov 10;112(45):E6139-47. doi: 10.1073/pnas.1512008112. Epub 2015 Oct 27.
• Photosynthetic water oxidation is catalyzed by the Mn4CaO5 cluster of photosystem II. Recent studies implicate an oxo bridge atom, O5, of the Mn4CaO5 cluster, as the "slowly exchanging" substrate water molecule. The D1-V185N mutant is in close vicinity of O5 and known to extend the lag phase and ret
• PMID 26508637

Japanese Journal

• 3D0924 隣接炭素化学シフトへの重水素同位体効果を利用したタンパク質側鎖OH/SH基の新しいNMR研究手法(3D 蛋白質_構造機能相関2,日本生物物理学会第49回年会)

• Takeda Mitsuhiro,Yang Chun-Jing,Jee JunGoo,Ono Akira,Terauchi Tsutomu,Kainosho Masatsune
• 生物物理 51(SUPPLEMENT_1), S117, 2011-08-15
• NAID 110008903431

• Single-crystal neutron structural analyses of potassium dihydrogen phosphate and potassium dideuterium phosphate

• Miyoshi Tatsuki,Mashiyama Hiroyuki,Asahi Takanao [他],Kimura Hiroyuki,Noda Yukio
• Journal of the Physical Society of Japan 80(4), 044709-044709-10, 2011-04-15
• … Single-crystal neutron structural analyses have been performed on both potassium dihydrogen phosphate (KDP) and potassium dideuterium phosphate (DKDP) in order to discuss the isotope effect from structural viewpoints. … The temperature dependences of the anisotropic atomic displacement parameters U_{33}'s and positional shifts of potassium, phosphorus, oxygen, and hydrogen/deuterium atoms along the polar c-axis is compared between KDP and DKDP. …
• NAID 150000089960

Related Links

• Isotope Effects - Columbia University in the City of New York

Deuterium Isotope Effects for Probing Aspects of the Interaction of H–H and C–H Bonds with Transition Metals Introduction It is well known that the measurement of kinetic deuterium isotope effects (i.e. k H / k D) provides a useful ...

• The Deuterium Isotope Effect - ResearchGate

Publication » The Deuterium Isotope Effect. Article The Deuterium Isotope Effect Kenneth B. Wiberg Chemical Reviews - CHEM REV 04/2002; 55(4). DOI:10.1021/cr50004a004 0 0 · 0 Bookmarks · 96 Views Citations (0) Source ...

---

★リンクテーブル★

リンク元	「重水素同位体効果」
関連記事	「effect」「deuterium」「effected」

「重水素同位体効果」

　　[★]

英

deuterium isotope effect

「effect」

　　[★]

• n.

• 結果。遂行、成就。
• 効果。効力。効き目、効能、影響。
• [美術・芸術]色彩、形の配合、光景、趣き、印象。外観、見え、体裁
• 趣旨、意図。本質、基本的意味

• vt.

• (変化などを)もたらす。(目的・計画など)果たす、遂げる。実施/施行する

関

act, action, affect, efficacy, impact, impinge, indication, influence, potency, effected

　 　 　 　 　 　 　

「deuterium」

　　[★]

• 重水素、ジュウテリウム

関

2H、D、deuteron、heavy hydrogen

　 　

「effected」

　　[★]

• adj.

• 結果として生じる

関

effect