出典(authority):フリー百科事典『ウィキペディア(Wikipedia)』「2015/06/06 11:54:16」(JST)
Attenuation coefficient or narrow beam attenuation coefficient of the volume of a material characterizes how easily it can be penetrated by a beam of light, sound, particles, or other energy or matter.[1] A large attenuation coefficient means that the beam is quickly "attenuated" (weakened) as it passes through the medium, and a small attenuation coefficient means that the medium is relatively transparent to the beam. The SI unit of attenuation coefficient is the reciprocal metre (m−1). "Extinction coefficient" is an old term for this quantity.[1]
Attenuation coefficient describes the extent to which the radiant flux of a beam is reduced as it passes through a specific material. It is used in the context of:
A small attenuation coefficient indicates that the material in question is relatively transparent, while a larger value indicates greater degrees of opacity. The attenuation coefficient is dependent upon the type of material and the energy of the radiation. Generally, for electromagnetic radiation, the higher the energy of the incident photons and the less dense the material in question, the lower the corresponding attenuation coefficient will be.
Hemispherical attenuation coefficient of a volume, denoted μ, is defined as[4]
where
Spectral hemispherical attenuation coefficient in frequency and spectral hemispherical attenuation coefficient in wavelength of a volume, denoted μν and μλ respectively, are defined as[4]
where
Directional attenuation coefficient of a volume, denoted μΩ, is defined as[4]
where Le,Ω is the radiance.
Spectral directional attenuation coefficient in frequency and spectral directional attenuation coefficient in wavelength of a volume, denoted μΩ,ν and μΩ,λ respectively, are defined as[4]
where
When a narrow (collimated) beam passes through a volume, the beam will lose intensity due to two processes: absorption and scattering.
Absorption coefficient of a volume, denoted μa, and scattering coefficient of a volume, denoted μs, are defined the same way as for attenuation coefficient.[4]
Attenuation coefficient of a volume is the sum of absorption coefficient and scattering coefficient:[4]
Just looking at the narrow beam itself, the two processes cannot be distinguished. However, if a detector is set up to measure beam leaving in different directions, or conversely using a non-narrow beam, one can measure how much of the lost radiant flux was scattered, and how much was absorbed.
In this context, the "absorption coefficient" measures how quickly the beam would lose radiant flux due to the absorption alone, while "attenuation coefficient" measures the total loss of narrow-beam intensity, including scattering as well. "Narrow-beam attenuation coefficient" always unambiguously refers to the latter. The attenuation coefficient is always larger than the absorption coefficient, although they are equal in the idealized case of no scattering.
Mass attenuation coefficient, mass absorption coefficient, and mass scattering coefficient are defined as[4]
where ρm is the mass density.
The decadic attenuation coefficient or decadic narrow beam attenuation coefficient, denoted μ10, is defined as
μ is sometimes called Napierian attenuation coefficient or Napierian narrow beam attenuation coefficient rather than just simply "attenuation coefficient". The terms "decadic" and "Napierian" come from the base used for the exponential in the Beer–Lambert law for a material sample, in which the two attenuation coefficients take part:
where
In case of uniform attenuation, these relations become
Cases of non-uniform attenuation occur in atmospheric science applications and radiation shielding theory for instance.
The (Napierian) attenuation coefficient and the decadic attenuation coefficient of a material sample are related to the number densities and the amount concentrations of its attenuating species as
where
by definition of attenuation cross section and molar attenuation coefficient.
Attenuation cross section and molar attenuation coefficient are related by
and number density and amount concentration by
where NA is the Avogadro constant.
The half-value layer (HVL) is the thickness of a layer of material required to reduce the radiant flux of the transmitted radiation to half its incident magnitude. The half-value layer is about 69% (ln 2) of the penetration depth. It is from these equations that engineers decide how much protection is needed for "safety" from potentially harmful radiation.
Attenuation coefficient is also inversely related to mean free path. Moreover, it is very closely related to the attenuation cross section.
Quantity | Unit | Dimension | Notes | |||||
---|---|---|---|---|---|---|---|---|
Name | Symbol[nb 1] | Name | Symbol | Symbol | ||||
Radiant energy | Qe[nb 2] | joule | J | M⋅L2⋅T−2 | Energy of electromagnetic radiation. | |||
Radiant energy density | we | joule per cubic metre | J/m3 | M⋅L−1⋅T−2 | Radiant energy per unit volume. | |||
Radiant flux | Φe[nb 2] | watt | W or J/s | M⋅L2⋅T−3 | Radiant energy emitted, reflected, transmitted or received, per unit time. This is sometimes also called "radiant power". | |||
Spectral flux | Φe,ν[nb 3] or |
watt per hertz or |
W/Hz or |
M⋅L2⋅T−2 or |
Radiant flux per unit frequency or wavelength. The latter is commonly measured in W⋅sr−1⋅m−2⋅nm−1. | |||
Radiant intensity | Ie,Ω[nb 5] | watt per steradian | W/sr | M⋅L2⋅T−3 | Radiant flux emitted, reflected, transmitted or received, per unit solid angle. This is a directional quantity. | |||
Spectral intensity | Ie,Ω,ν[nb 3] or |
watt per steradian per hertz or |
W⋅sr−1⋅Hz−1 or |
M⋅L2⋅T−2 or |
Radiant intensity per unit frequency or wavelength. The latter is commonly measured in W⋅sr−1⋅m−2⋅nm−1. This is a directional quantity. | |||
Radiance | Le,Ω[nb 5] | watt per steradian per square metre | W⋅sr−1⋅m−2 | M⋅T−3 | Radiant flux emitted, reflected, transmitted or received by a surface, per unit solid angle per unit projected area. This is a directional quantity. This is sometimes also confusingly called "intensity". | |||
Spectral radiance | Le,Ω,ν[nb 3] or |
watt per steradian per square metre per hertz or |
W⋅sr−1⋅m−2⋅Hz−1 or |
M⋅T−2 or |
Radiance of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅sr−1⋅m−2⋅nm−1. This is a directional quantity. This is sometimes also confusingly called "spectral intensity". | |||
Irradiance | Ee[nb 2] | watt per square metre | W/m2 | M⋅T−3 | Radiant flux received by a surface per unit area. This is sometimes also confusingly called "intensity". | |||
Spectral irradiance | Ee,ν[nb 3] or |
watt per square metre per hertz or |
W⋅m−2⋅Hz−1 or |
M⋅T−2 or |
Irradiance of a surface per unit frequency or wavelength. The former is commonly measured in 10−22 W⋅m−2⋅Hz−1, known as solar flux unit, and the latter in W⋅m−2⋅nm−1.[nb 6] This is sometimes also confusingly called "spectral intensity". | |||
Radiosity | Je[nb 2] | watt per square metre | W/m2 | M⋅T−3 | Radiant flux leaving (emitted, reflected and transmitted by) a surface per unit area. This is sometimes also confusingly called "intensity". | |||
Spectral radiosity | Je,ν[nb 3] or |
watt per square metre per hertz or |
W⋅m−2⋅Hz−1 or |
M⋅T−2 or |
Radiosity of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅m−2⋅nm−1. This is sometimes also confusingly called "spectral intensity". | |||
Radiant exitance | Me[nb 2] | watt per square metre | W/m2 | M⋅T−3 | Radiant flux emitted by a surface per unit area. This is the emitted component of radiosity. "Radiant emittance" is an old term for this quantity. This is sometimes also confusingly called "intensity". | |||
Spectral exitance | Me,ν[nb 3] or |
watt per square metre per hertz or |
W⋅m−2⋅Hz−1 or |
M⋅T−2 or |
Radiant exitance of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅m−2⋅nm−1. "Spectral emittance" is an old term for this quantity. This is sometimes also confusingly called "spectral intensity". | |||
Radiant exposure | He | joule per square metre | J/m2 | M⋅T−2 | Radiant energy received by a surface per unit area, or equivalently irradiance of a surface integrated over time of irradiation. This is sometimes also called "radiant fluence". | |||
Spectral exposure | He,ν[nb 3] or |
joule per square metre per hertz or |
J⋅m−2⋅Hz−1 or |
M⋅T−1 or |
Radiant exposure of a surface per unit frequency or wavelength. The latter is commonly measured in J⋅m−2⋅nm−1. This is sometimes also called "spectral fluence". | |||
Hemispherical emissivity | ε | 1 | Radiant exitance of a surface, divided by that of a black body at the same temperature as that surface. | |||||
Spectral hemispherical emissivity | εν or |
1 | Spectral exitance of a surface, divided by that of a black body at the same temperature as that surface. | |||||
Directional emissivity | εΩ | 1 | Radiance emitted by a surface, divided by that emitted by a black body at the same temperature as that surface. | |||||
Spectral directional emissivity | εΩ,ν or |
1 | Spectral radiance emitted by a surface, divided by that of a black body at the same temperature as that surface. | |||||
Hemispherical absorptance | A | 1 | Radiant flux absorbed by a surface, divided by that received by that surface. This should not be confused with "absorbance". | |||||
Spectral hemispherical absorptance | Aν or |
1 | Spectral flux absorbed by a surface, divided by that received by that surface. This should not be confused with "spectral absorbance". | |||||
Directional absorptance | AΩ | 1 | Radiance absorbed by a surface, divided by the radiance incident onto that surface. This should not be confused with "absorbance". | |||||
Spectral directional absorptance | AΩ,ν or |
1 | Spectral radiance absorbed by a surface, divided by the spectral radiance incident onto that surface. This should not be confused with "spectral absorbance". | |||||
Hemispherical reflectance | R | 1 | Radiant flux reflected by a surface, divided by that received by that surface. | |||||
Spectral hemispherical reflectance | Rν or |
1 | Spectral flux reflected by a surface, divided by that received by that surface. | |||||
Directional reflectance | RΩ | 1 | Radiance reflected by a surface, divided by that received by that surface. | |||||
Spectral directional reflectance | RΩ,ν or |
1 | Spectral radiance reflected by a surface, divided by that received by that surface. | |||||
Hemispherical transmittance | T | 1 | Radiant flux transmitted by a surface, divided by that received by that surface. | |||||
Spectral hemispherical transmittance | Tν or |
1 | Spectral flux transmitted by a surface, divided by that received by that surface. | |||||
Directional transmittance | TΩ | 1 | Radiance transmitted by a surface, divided by that received by that surface. | |||||
Spectral directional transmittance | TΩ,ν or |
1 | Spectral radiance transmitted by a surface, divided by that received by that surface. | |||||
Hemispherical attenuation coefficient | μ | reciprocal metre | m−1 | L−1 | Radiant flux absorbed and scattered by a volume per unit length, divided by that received by that volume. | |||
Spectral hemispherical attenuation coefficient | μν or |
reciprocal metre | m−1 | L−1 | Spectral radiant flux absorbed and scattered by a volume per unit length, divided by that received by that volume. | |||
Directional attenuation coefficient | μΩ | reciprocal metre | m−1 | L−1 | Radiance absorbed and scattered by a volume per unit length, divided by that received by that volume. | |||
Spectral directional attenuation coefficient | μΩ,ν or |
reciprocal metre | m−1 | L−1 | Spectral radiance absorbed and scattered by a volume per unit length, divided by that received by that volume. | |||
See also: SI · Radiometry · Photometry |
全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.
リンク元 | 「線吸収係数」 |
関連記事 | 「linear」「line」「coefficient」 |
.