出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2014/11/26 10:49:32」(JST)
| This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (December 2010) |
A window is an opening in a wall, door, roof or vehicle that allows the passage of light and, if not closed or sealed, air and sound.[1] Modern windows are usually glazed or covered in some other transparent or translucent material. Windows are held in place by frames.[2] Many glazed windows may be opened, to allow ventilation, or closed, to exclude inclement weather.[3] Windows often have a latch or similar mechanism to lock the window shut.
Types include the eyebrow window, fixed windows, single-hung and double-hung sash windows, horizontal sliding sash windows, casement windows, awning windows, hopper windows, tilt and slide windows (often door-sized), tilt and turn windows, transom windows, sidelight windows, jalousie or louvered windows, clerestory windows, skylights, roof windows, roof lanterns, bay windows, oriel windows, thermal, or Diocletian, windows, picture windows, emergency exit windows, stained glass windows, French windows, and double- and triple paned windows.
The Romans were the first known to use glass for windows, a technology likely first produced in Roman Egypt—In Alexandria ca. 100 AD. Paper windows were economical and widely used in ancient China, Korea and Japan. In England, glass became common in the windows of ordinary homes only in the early 17th century whereas windows made up of panes of flattened animal horn were used as early as the 14th century. Modern-style floor-to-ceiling windows became possible only after the industrial plate glass making processes were perfected.
The word window originates from the Old Norse 'vindauga', from 'vindr – wind' and 'auga – eye', i.e., wind eye. In Norwegian Nynorsk and Icelandic the Old Norse form has survived to this day (in Icelandic only as a less used synonym to gluggi), in Swedish the word vindöga remains as a term for a hole through the roof of a hut, and in the Danish language 'vindue' and Norwegian Bokmål 'vindu', the direct link to 'eye' is lost, just like for 'window'. The Danish (but not the Bokmål) word is pronounced fairly similarly to window.
Window is first recorded in the early 13th century, and originally referred to an unglazed hole in a roof. Window replaced the Old English eagþyrl, which literally means 'eye-hole,' and 'eagduru' 'eye-door'. Many Germanic languages however adopted the Latin word 'fenestra' to describe a window with glass, such as standard Swedish 'fönster', or German 'Fenster'. The use of window in English is probably because of the Scandinavian influence on the English language by means of loanwords during the Viking Age. In English the word fenester was used as a parallel until the mid-18th century and fenestration is still used to describe the arrangement of windows within a façade. Also, words such as "defenestration" are in use, meaning to throw something out of a window.
From Webster's 1828 Dictionary: Window, n. [G. The vulgar pronunciation is windor, as if from the Welsh gwyntdor, wind-door.][4]
Fragment of a Roman window glass plate dated to 1st to 4th century A.D.
The earliest windows were just holes in a wall. Later, windows were covered with animal hide, cloth, or wood. Shutters that could be opened and closed came next. Over time, windows were built that both protected the inhabitants from the elements and transmitted light: mullioned glass windows, which joined multiple small pieces of glass with leading, paper windows, flattened pieces of translucent animal horn, and plates of thinly sliced marble. In the Far East, paper was used to fill windows.[2] The Romans were the first known to use glass for windows, a technology likely first produced in Roman Egypt—In Alexandria ca. 100 AD, cast glass windows, albeit with poor optical properties, began to appear—but these were small thick productions, little more than blown glass jars (cylindrical shapes) flattened out into sheets with circular striation patterns throughout. It would be over a millennium before a window glass became transparent enough to see through clearly, as we think of it now.
Over the centuries techniques were developed to shear through one side of a blown glass cylinder and produce thinner rectangular window panes from the same amount of glass material. This gave rise to tall narrow windows, usually separated by a vertical support called a mullion. Mullioned glass windows were the windows of choice among European well-to-do, whereas paper windows were economical and widely used in ancient China, Korea and Japan. In England, glass became common in the windows of ordinary homes only in the early 17th century whereas windows made up of panes of flattened animal horn were used as early as the 14th century.[5] Noted science historian, author and television show host/producer James Burke attributes the rapid deforestation of Great Britain in the late 1500s to the uptick in production of glazed windows as well as iron cannon production (1st Cast in 1547). He writes further this gave rise to coal for fuel, which spurred iron production, requiring more coal, and more iron, then steam engine pumps, canals... and more iron; all because windows became a middle class commodity in the latter days of the little ice age, one large factor among several leading to the deforesting English woodlands, and the switch over to a coal economy.
Modern-style floor-to-ceiling windows became possible only after the industrial plate glass making processes were perfected. Modern windows are usually filled with glass, although a few are transparent plastic.[2]
The term eyebrow window is used in two ways: a curved top window in a wall or in an eyebrow dormer; and a row of small windows usually under the front eaves such as the James-Lorah House in Pennsylvania.[6]
A window that cannot be opened, whose function is limited to allowing light to enter (unlike an unfixed window, which can open and close). Clerestory windows are often fixed. Transom windows may be fixed or operable. This type of window is used in situations where light or vision alone is needed as no ventilation is possible windows without the use of trickle vents or overglass vents.
One sash is movable (usually the bottom one) and the other fixed. This is the earlier form of sliding sash window, and is also cheaper.[2]
A sash window is the traditional style of window in the United Kingdom, and many other places that were formerly colonized by the UK, with two parts (sashes) that overlap slightly and slide up and down inside the frame. The two parts are not necessarily the same size. Currently most new double-hung sash windows use spring balances to support the sashes, but traditionally, counterweights held in boxes on either side of the window were used. These were and are attached to the sashes using pulleys of either braided cord or, later, purpose-made chain. Three types of spring balances are called a tape or clock spring balance; channel or block-and-tackle balance; and a spiral or tube balance.
Double-hung sash windows were traditionally often fitted with shutters. Sash windows can be fitted with simplex hinges that let the window be locked into hinges on one side, while the rope on the other side is detached—so the window can be opened for fire escape or cleaning.
Has two or more sashes that overlap slightly but slide horizontally within the frame. In the UK, these are sometimes called Yorkshire sash windows, presumably because of their traditional use in that county.
A window with a hinged sash that swings in or out like a door comprising either a side-hung, top-hung (also called "awning window"; see below), or occasionally bottom-hung sash or a combination of these types, sometimes with fixed panels on one or more sides of the sash.[1] In the USA, these are usually opened using a crank, but in parts of Europe they tend to use projection friction stays and espagnolette locking. Formerly, plain hinges were used with a casement stay. Handing applies to casement windows to determine direction of swing; a casement window may be left-handed, right-handed, or double. The casement window is the dominant type now found in the UK and parts of Europe.
An awning window is a casement window that is hung horizontally, hinged on top, so that it swings outward like an awning. Emilie Poisson designed this window.[citation needed]
A hopper window is a bottom-pivoting casement window that opens by tilting vertically, typically to the inside.[7] (Mostly used for schools)
A window (more usually a door-sized window) where the sash tilts inwards at the top and then slides horizontally behind the fixed pane.
A tilt and turn window can both tilt inwards at the top or open inwards from hinges at the side. This is the most common type of window in Germany, its country of origin. It is also widespread in many other European countries.[8]
A window above a door; in an exterior door the transom window is often fixed, in an interior door it can open either by hinges at top or bottom, or rotate on hinges. It provided ventilation before forced air heating and cooling. A fan-shaped transom is known as a fanlight, especially in the British Isles.
Windows beside a door or window are called side-, wing-, and margen-lights and flanking windows.[9]
Also known as a louvered window, the jalousie window consists of parallel slats of glass or acrylic that open and close like a Venetian blind, usually using a crank or a lever. They are used extensively in tropical architecture. A jalousie door is a door with a jalousie window.
A window set in a roof structure or high in a wall, used for daylighting.
A flat or slope window used for daylighting, built into a roof structure that is out of reach.[10]
A sloped window used for daylighting, built into a roof structure. It is one of the few windows that could be used as an exit. Larger roof windows meet building codes for emergency evacuation.
A roof lantern is a multi-paned glass structure, resembling a small building, built on a roof for day or moon light. Sometimes includes an additional clerestory. May also be called a cupola.
A multi-panel window, with at least three panels set at different angles to create a protrusion from the wall line.[1]
This form of bay window most often appears in Tudor-style houses and monasteries. It projects from the wall and does not extend to the ground. Originally a form of porch, they are often supported by brackets or corbels.
Thermal, or Diocletian, windows are large semicircular windows (or niches) which are usually divided into three lights (window compartments) by two mullions. The central compartment is often wider than the two side lights on either side of it.
A picture window is a large fixed window in a wall, typically without glazing bars, or glazed with only perfunctory glazing bars near the edge of the window. Picture windows provide an unimpeded view, as if framing a picture.[11]
A window glazed with small panes of glass separated by wooden or lead glazing bars, or muntins, arranged in a decorative glazing pattern often dictated by the building's architectural style. Due to the historic unavailability of large panes of glass, the multi-lit (or lattice window) was the most common window style until the beginning of the 20th century, and is still used in traditional architecture.
A window big enough and low enough so that occupants can escape through the opening in an emergency, such as a fire. In many countries, exact specifications for emergency windows in bedrooms are given in many building codes. Specifications for such windows may also allow for the entrance of emergency rescuers. Vehicles, such as buses and aircraft, frequently have emergency exit windows as well.[12]
A window composed of pieces of colored glass, transparent, translucent or opaque, frequently portraying persons or scenes. Typically the glass in these windows is separated by lead glazing bars. Stained glass windows were popular in Victorian houses and some Wrightian houses, and are especially common in churches.[13]
A French window (when hinged French door) is a large door-sized lattice light, typically set in pairs or multiples thereof. Known as porte-fenêtre in France and portafinestra in Italy, they often overlook a terrace and are commonly used in modern houses [14]
Double paned windows have two parallel panes (slabs of glass) with a separation of typically about 1 cm; this space is permanently sealed and filled at the time of manufacture with dry air or other dry nonreactive gas. Such windows provide a marked improvement in thermal insulation (and usually in acoustic insulation as well) and are resistant to fogging and frosting caused by temperature differential. They are widely used for residential and commercial construction in intemperate climates. Triple-paned windows have been commercially manufactured and marketed with claims of additional benefit but have not become common.
EN 12519 is the European norm that describes windows terms officially used in EU Member States. The main terms are:
The United States NFRC Window Label lists the following terms:
The European harmonised standard hEN 14351-1, which deals with doors and windows, defines 23 characteristics (divided into essential and non essential. Two other, preliminary European Norms that are under development deal with internal pedestrian doors (prEN 14351-2), smoke and fire resisting doors, and openable windows (prEN 16034).[17]
Windows can be a significant source of heat transfer.[18] Therefore, insulated glazing units consist of two or more panes to reduce the transfer of heat.
These are the pieces of framing that separate a larger window into smaller panes. In older windows, large panes of glass were quite expensive, so muntins let smaller panes fill a larger space. In modern windows, light-colored muntins still provide a useful function by reflecting some of the light going through the window, making the window itself a source of diffuse light (instead of just the surfaces and objects illuminated within the room). By increasing the indirect illumination of surfaces near the window, muntins tend to brighten the area immediately around a window and reduce the contrast of shadows within the room.
Frames and sashes can be made of the following materials:
| Material | thermal resistance | Durability | Maintenance | Cost | Recycled content | Comment |
|---|---|---|---|---|---|---|
| Wood | very good | variable | high | high | low | shrinks and swells with humidity changes |
| PVC ("vinyl") | very good | good* | low | low | very low | |
| Aluminum | bad** | good | very low | low | typically > 95% | used in most large structures |
| Steel | medium | superior | very low | high | > 98% | typically welded at corner joints |
| Fiberglass | very good | very good* | very low | high | medium |
* PVC and fiberglass frames perform well in accelerated weathering tests. Because PVC is not as strong as other materials, some PVC frames are reinforced with metal or composite materials to improve their structural strength.
** Modern aluminium window frames are typically separated by a thermal break made of a polyamide. This greatly increases thermal resistance, while retaining virtually all of the structural strength.
Composites may combine materials to obtain aesthetics of one material with the functional benefits of another.
A special class of PVC window frames, uPVC window frames, became widespread since the late 20th century, particularly in Europe: there were 83.5 million installed by 1998[19] with numbers still growing as of 2012.[20]
Low-emissivity coated panes reduce heat transfer by radiation, which, depending on which surface is coated, helps prevent heat loss (in cold climates) or heat gains (in warm climates).
High thermal resistance can be obtained by evacuating or filling the insulated glazing units with gases such as argon or krypton, which reduces conductive heat transfer due to their low thermal conductivity. Performance of such units depends on good window seals and meticulous frame construction to prevent entry of air and loss of efficiency.
Modern double-pane and triple-pane windows often include one or more low-e coatings to reduce the window's U-factor (its insulation value, specifically its rate of heat loss). In general, soft-coat low-e coatings tend to result in a lower solar heat gain coefficient (SHGC) than hard-coat low-e coatings.
Modern windows are usually glazed with one large sheet of glass per sash, while windows in the past were glazed with multiple panes separated by glazing bars, or muntins, due to the unavailability of large sheets of glass. Today, glazing bars tend to be decorative, separating windows into small panes of glass even though larger panes of glass are available, generally in a pattern dictated by the architectural style at use. Glazing bars are typically wooden, but occasionally lead glazing bars soldered in place are used for more intricate glazing patterns.
Many windows have movable window coverings such as blinds or curtains to keep out light, provide additional insulation, or ensure privacy. Windows allow natural light to enter, but too much can have negative effects such as glare and heat gain. Additionally, while windows let the user see outside, there must be a way to maintain privacy on in the inside.[21] Window coverings are practical accommodations for these issues.
Historically, windows are designed with surfaces parallel to vertical building walls. Such a design allows considerable solar light and heat penetration due to the most commonly occurring incidence of sun angles. In passive solar building design, an extended eave is typically used to control the amount of solar light and heat entering the window(s).
An alternative method is to calculate an optimum window mounting angle that accounts for summer sun load minimization, with consideration of actual latitude of the building. This process has been implemented, for example, in the Dakin Building in Brisbane, California—in which most of the fenestration is designed to reflect summer heat load and help prevent summer interior over-illumination and glare, by canting windows to nearly a 45 degree angle.
Photovoltaic windows not only provide a clear view and illuminate rooms, but also convert sunlight to electricity for the building.[22] In most cases, translucent photovoltaic cells are used.
Passive solar windows allow light and solar energy into a building while minimizing air leakage and heat loss. Properly positioning these windows in relation to sun, wind, and landscape—while properly shading them to limit excess heat gain in summer and shoulder seasons, and providing thermal mass to absorb energy during the day and release it when temperatures cool at night—increases comfort and energy efficiency. Properly designed in climates with adequate solar gain, these can even be a building's primary heating system.
A window covering is a shade or screen that provides multiple functions. For example, some window coverings control solar heat gain and glare. There are external shading devices and internal shading devices.[23] Low-e window film is a low-cost alternative to window replacement to transform existing poorly-insulating windows into energy-efficient windows. For high-rise buildings, smart glass can provide an alternative.
Woven bamboo window in Japan
Church window
Factory site in Berlin-Spindlersfeld: window with letter S for Spindler
Classical Chinese window in Lan Su Chinese Garden
Arab-style windows in Jerusalem
Romanesque/Gothic window from Abbey of St. Maria d'Arles
Desay Madu Jhya traditional carved wooden window in Kathmandu, Nepal
A half-glazed window of the 17th century from Scotland
Windows of a brick building in Washington DC
Window, Villa Majorelle, France
Asymmetrical windows at a building in the backyard of an arts museum in Osnabrück, Germany
| Wikimedia Commons has media related to Windows. |
全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.
| リンク元 | 「窓」 |
| 拡張検索 | 「window level」「submucous window resection of nasal septum」 |
| 関連記事 | 「wind」 |