出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2015/06/20 12:28:57」(JST)
In mathematics, the limit inferior and limit superior of a sequence can be thought of as limiting (i.e., eventual and extreme) bounds on the sequence. They can be thought of in a similar fashion for a function (see limit of a function). For a set, they are the infimum and supremum of the set's limit points, respectively. In general, when there are multiple objects around which a sequence, function, or set accumulates, the inferior and superior limits extract the smallest and largest of them; the type of object and the measure of size is context-dependent, but the notion of extreme limits is invariant. Limit inferior is also called infimum limit, liminf, inferior limit, lower limit, or inner limit; limit superior is also known as supremum limit, limit supremum, limsup, superior limit, upper limit, or outer limit.
The limit inferior of a sequence (x_{n}) is defined by
or
Similarly, the limit superior of (x_{n}) is defined by
or
Alternatively, the notations and are sometimes used.
If the terms in the sequence are real numbers, the limit superior and limit inferior always exist, as real numbers or ±∞ (i.e., on the extended real number line). More generally, these definitions make sense in any partially ordered set, provided the suprema and infima exist, such as in a complete lattice.
Whenever the ordinary limit exists, the limit inferior and limit superior are both equal to it; therefore, each can be considered a generalization of the ordinary limit which is primarily interesting in cases where the limit does not exist. Whenever lim inf x_{n} and lim sup x_{n} both exist, we have
Limits inferior/superior are related to big-O notation in that they bound a sequence only "in the limit"; the sequence may exceed the bound. However, with big-O notation the sequence can only exceed the bound in a finite prefix of the sequence, whereas the limit superior of a sequence like e^{−n} may actually be less than all elements of the sequence. The only promise made is that some tail of the sequence can be bounded by the limit superior (inferior) plus (minus) an arbitrarily small positive constant.
The limit superior and limit inferior of a sequence are a special case of those of a function (see below).
In mathematical analysis, limit superior and limit inferior are important tools for studying sequences of real numbers. Since the supremum and infimum of an unbounded set of real numbers may not exist (the reals are not a complete lattice), it is convenient to consider sequences in the affinely extended real number system: we add the positive and negative infinities to the real line to give the complete totally ordered set (−∞,∞), which is a complete lattice.
Consider a sequence consisting of real numbers. Assume that the limit superior and limit inferior are real numbers (so, not infinite).
The relationship of limit inferior and limit superior for sequences of real numbers is as follows
As mentioned earlier, it is convenient to extend to [−∞,∞]. Then, (x_{n}) in [−∞,∞] converges if and only if
in which case is equal to their common value. (Note that when working just in , convergence to −∞ or ∞ would not be considered as convergence.) Since the limit inferior is at most the limit superior, the condition
and the condition
If and , then the interval [I, S] need not contain any of the numbers x_{n}, but every slight enlargement [I − ε, S + ε] (for arbitrarily small ε > 0) will contain x_{n} for all but finitely many indices n. In fact, the interval [I, S] is the smallest closed interval with this property. We can formalize this property like this: there exist subsequences and of (where and are monotonous) for which we have
On the other hand, there exists a so that for all
To recapitulate:
In general we have that
The liminf and limsup of a sequence are respectively the smallest and greatest cluster points.
Analogously, the limit inferior satisfies superadditivity:
In the particular case that one of the sequences actually converges, say , then the inequalities above become equalities (with or being replaced by ).
and
(This is because the sequence {1,2,3,...} is equidistributed mod 2π, a consequence of the Equidistribution theorem.)
where p_{n} is the n-th prime number. The value of this limit inferior is conjectured to be 2 – this is the twin prime conjecture – but as of April 2014^{[update]} has only been proven to be less than or equal to 246.^{[1]} The corresponding limit superior is , because there are arbitrary gaps between consecutive primes.
Assume that a function is defined from a subset of the real numbers to the real numbers. As in the case for sequences, the limit inferior and limit superior are always well-defined if we allow the values +∞ and −∞; in fact, if both agree then the limit exists and is equal to their common value (again possibly including the infinities). For example, given f(x) = sin(1/x), we have lim sup_{x→0} f(x) = 1 and lim inf_{x→0} f(x) = −1. The difference between the two is a rough measure of how "wildly" the function oscillates, and in observation of this fact, it is called the oscillation of f at a. This idea of oscillation is sufficient to, for example, characterize Riemann-integrable functions as continuous except on a set of measure zero [1]. Note that points of nonzero oscillation (i.e., points at which f is "badly behaved") are discontinuities which, unless they make up a set of zero, are confined to a negligible set.
There is a notion of lim sup and lim inf for functions defined on a metric space whose relationship to limits of real-valued functions mirrors that of the relation between the lim sup, lim inf, and the limit of a real sequence. Take metric spaces X and Y, a subspace E contained in X, and a function f : E → Y. The space Y should also be an ordered set, so that the notions of supremum and infimum make sense. Define, for any limit point a of E,
and
where B(a;ε) denotes the metric ball of radius ε about a.
Note that as ε shrinks, the supremum of the function over the ball is monotone decreasing, so we have
and similarly
This finally motivates the definitions for general topological spaces. Take X, Y, E and a as before, but now let X and Y both be topological spaces. In this case, we replace metric balls with neighborhoods:
(there is a way to write the formula using a lim using nets and the neighborhood filter). This version is often useful in discussions of semi-continuity which crop up in analysis quite often. An interesting note is that this version subsumes the sequential version by considering sequences as functions from the natural numbers as a topological subspace of the extended real line, into the space (the closure of N in (−∞,∞) is N ∪ {∞}.)
The power set ℘(X) of a set X is a complete lattice that is ordered by set inclusion, and so the supremum and infimum of any set of subsets (in terms of set inclusion) always exist. In particular, every subset Y of X is bounded above by X and below by the empty set ∅ because ∅ ⊆ Y ⊆ X. Hence, it is possible (and sometimes useful) to consider superior and inferior limits of sequences in ℘(X) (i.e., sequences of subsets of X).
There are two common ways to define the limit of sequences of sets. In both cases:
The difference between the two definitions involves how the topology (i.e., how to quantify separation) is defined. In fact, the second definition is identical to the first when the discrete metric is used to induce the topology on X.
In this case, a sequence of sets approaches a limiting set when the elements of each member of the sequence approach the elements of the limiting set. In particular, if {X_{n}} is a sequence of subsets of X, then:
The limit lim X_{n} exists if and only if lim inf X_{n} and lim sup X_{n} agree, in which case lim X_{n} = lim sup X_{n} = lim inf X_{n}.^{[2]}
This example is substantially covered from the set-theoretic point of view here: set-theoretic limit, as opposed to the topological point of view discussed below.
In this case, which is frequently used in measure theory, a sequence of sets approaches a limiting set when the limiting set includes elements from each of the members of the sequence. That is, this case specializes the first case when the topology on set X is induced from the discrete metric. For points x ∈ X and y ∈ X, the discrete metric is defined by
So a sequence of points {x_{k}} converges to point x ∈ X if and only if x_{k} = x for all but finitely many k. The following definition is the result of applying this metric to the general definition above.
If {X_{n}} is a sequence of subsets of X, then:
The limit lim X exists if and only if lim inf X and lim sup X agree, in which case lim X = lim sup X = lim inf X.^{[3]} This definition of the inferior and superior limits is relatively strong because it requires that the elements of the extreme limits also be elements of each of the sets of the sequence.
Using the standard parlance of set theory, consider the infimum of a sequence of sets. The infimum is a greatest lower bound or meet of a set. In the case of a sequence of sets, the sequence constituents meet at a set that is somehow smaller than each constituent set. Set inclusion provides an ordering that allows set intersection to generate a greatest lower bound ∩X_{n} of sets in the sequence {X_{n}}. Similarly, the supremum, which is the least upper bound or join, of a sequence of sets is the union ∪X_{n} of sets in sequence {X_{n}}. In this context, the inner limit lim inf X_{n} is the largest meeting of tails of the sequence, and the outer limit lim sup X_{n} is the smallest joining of tails of the sequence.
The limit lim X_{n} exists if and only if lim sup X_{n}=lim inf X_{n}, and in that case, lim X_{n}=lim inf X_{n}=lim sup X_{n}. In this sense, the sequence has a limit so long as all but finitely many of its elements are equal to the limit.
The following are several set convergence examples. They have been broken into sections with respect to the metric used to induce the topology on set X.
The above definitions are inadequate for many technical applications. In fact, the definitions above are specializations of the following definitions.
The limit inferior of a set X ⊆ Y is the infimum of all of the limit points of the set. That is,
Similarly, the limit superior of a set X is the supremum of all of the limit points of the set. That is,
Note that the set X needs to be defined as a subset of a partially ordered set Y that is also a topological space in order for these definitions to make sense. Moreover, it has to be a complete lattice so that the suprema and infima always exist. In that case every set has a limit superior and a limit inferior. Also note that the limit inferior and the limit superior of a set do not have to be elements of the set.
Take a topological space X and a filter base B in that space. The set of all cluster points for that filter base is given by
where is the closure of . This is clearly a closed set and is similar to the set of limit points of a set. Assume that X is also a partially ordered set. The limit superior of the filter base B is defined as
when that supremum exists. When X has a total order, is a complete lattice and has the order topology,
Proof: Similarly, the limit inferior of the filter base B is defined as
when that infimum exists; if X is totally ordered, is a complete lattice, and has the order topology, then
If the limit inferior and limit superior agree, then there must be exactly one cluster point and the limit of the filter base is equal to this unique cluster point.
Note that filter bases are generalizations of nets, which are generalizations of sequences. Therefore, these definitions give the limit inferior and limit superior of any net (and thus any sequence) as well. For example, take topological space and the net , where is a directed set and for all . The filter base ("of tails") generated by this net is defined by
Therefore, the limit inferior and limit superior of the net are equal to the limit superior and limit inferior of respectively. Similarly, for topological space , take the sequence where for any with being the set of natural numbers. The filter base ("of tails") generated by this sequence is defined by
Therefore, the limit inferior and limit superior of the sequence are equal to the limit superior and limit inferior of respectively.
全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.
リンク元 | 「ceiling」「上限」 |
関連記事 | 「limit」「limiting」「limited」「upper」 |