出典(authority):フリー百科事典『ウィキペディア(Wikipedia)』「2019/07/15 18:37:05」(JST)
Carpals | |
---|---|
There are eight carpal bones in each wrist
| |
Details | |
Identifiers | |
Latin | os carpale pl. ossa carpi |
MeSH | D002348 |
TA | A02.4.08.001 |
FMA | 23889 |
Anatomical terms of bone [edit on Wikidata] |
The carpal bones are the eight small bones that make up the wrist (or carpus) that connects the hand to the forearm. The term "carpus" is derived from the Latin carpus and the Greek καρπός (karpós), meaning "wrist". In human anatomy, the main role of the wrist is to facilitate effective positioning of the hand and powerful use of the extensors and flexors of the forearm, and the mobility of individual carpal bones increase the freedom of movements at the wrist.[1]
In tetrapods, the carpus is the sole cluster of bones in the wrist between the radius and ulna and the metacarpus. The bones of the carpus do not belong to individual fingers (or toes in quadrupeds), whereas those of the metacarpus do. The corresponding part of the foot is the tarsus. The carpal bones allow the wrist to move and rotate vertically.[1]
The eight carpal bones may be conceptually organized as either two transverse rows, or three longitudinal columns.
When considered as paired rows, each row forms an arch which is convex proximally and concave distally. On the palmar side, the carpus is concave and forms the carpal tunnel, which is covered by the flexor retinaculum.[2] The proximal row (comprising scaphoid, lunate, and triquetrum) articulates with the surfaces of the radius and distal carpal row, and thus constantly adapts to these mobile surfaces. Within the proximal row, each carpal bone has slight independent mobility. For example, the scaphoid contributes to midcarpal stability by articulating distally with the trapezium and the trapezoid. In contrast, the distal row is more rigid as its transverse arch moves with the metacarpals.[3]
Biomechanically and clinically, the carpal bones are better conceptualized as three longitudinal columns:[4]
In this context the pisiform is regarded as a sesamoid bone embedded in the tendon of the flexor carpi ulnaris.[4] The ulnar column leaves a gap between the ulna and the triquetrum, and therefore, only the radial or scaphoid and central or capitate columns articulate with the radius. The wrist is more stable in flexion than in extension more because of the strength of various capsules and ligaments than the interlocking parts of the skeleton.[3]
Almost all carpals (except the pisiform) have six surfaces. Of these the palmar or anterior and the dorsal or posterior surfaces are rough, for ligamentous attachment; the dorsal surfaces being the broader, except in the lunate.
The superior or proximal, and inferior or distal surfaces are articular, the superior generally convex, the inferior concave; the medial and lateral surfaces are also articular where they are in contact with contiguous bones, otherwise they are rough and tuberculated.
The structure in all is similar: cancellous tissue enclosed in a layer of compact bone.
Phalanges
Distal
Middle
Proximal
DIP
PIP
MCP
CMC
Wrist
Metacarpus
I
II
III
IV
V
Carpus
Trapezium
Trapezoid
Capitate
Hamate
Pisiform
Triquetral
Lunate
Scaphoid
Radius
Ulna
|
Carpal bones and their articulations. Carpal bones are shown in violet. Human left hand, anterior (palmar) view. |
Name | Proximal/radial articulations |
Lateral/medial articulations |
Distal/metacarpal articulations |
---|---|---|---|
Proximal row | |||
Scaphoid | radius | capitate, lunate | trapezium, trapezoid |
Lunate | radius, articular disk | scaphoid, triquetral | capitate, hamate (sometimes) |
Triquetrum | articular disk | lunate, pisiform | hamate |
Pisiform | triquetral | ||
Distal row | |||
Trapezium | scaphoid | trapezoid | first and second metacarpal |
Trapezoid | scaphoid | trapezium, capitate | second metacarpal |
Capitate | scaphoid, lunate | trapezoid, hamate | third, partly second and fourth metacarpal |
Hamate | triquetral, lunate | capitate | fourth and fifth |
Occasionally accessory bones are found in the carpus, but of more than 20 such described bones, only four (the central, styloid, secondary trapezoid, and secondary pisiform bones) are considered to be proven accessory bones. Sometimes the scaphoid, triquetrum, and pisiform bones are divided into two. [2]
Bone | Average | Variation[6] | Variation[7] |
---|---|---|---|
Capitate | 2.5 months | 1–6 months | 1–5 months |
Hamate | 4-5.5 months | 1–7 months | 1–12 months |
Triquetrum | 2 years | 5 months to 3 years | 9 months to 4 years and 2 months |
Lunate | 5 years | 2-5.5 years | 18 months to 4 years and 3 months |
Trapezium | 6 years | 4–8 years | |
Trapezoid | 6 years | 4–8 years | |
Scaphoid | 6 years | 4–7 years | |
Pisiform | 12 years | 8–12 years |
The carpal bones are ossified endochondrally (from within the cartilage) and the ossific centers appear only after birth. [5] The formation of these centers roughly follows a chronological spiral pattern starting in the capitate and hamate during the first year of life. The ulnar bones are then ossified before the radial bones, while the sesamoid pisiform arises in the tendon of the flexor carpi ulnaris after more than ten years. [6] The commencement of ossification for each bone occurs over period like other bones. This is useful in forensic age estimation.[7]
There are four groups of ligaments in the region of the wrist:[8]
The hand is said to be in straight position when the third finger runs over the capitate bone and is in a straight line with the forearm. This should not be confused with the midposition of the hand which corresponds to an ulnar deviation of 12 degrees. From the straight position two pairs of movements of the hand are possible: abduction (movement towards the radius, so called radial deviation or abduction) of 15 degrees and adduction (movement towards the ulna, so called ulnar deviation or adduction) of 40 degrees when the arm is in strict supination and slightly greater in strict pronation. [9] Flexion (tilting towards the palm, so called palmar flexion) and extension (tilting towards the back of the hand, so called dorsiflexion) is possible with a total range of 170 degrees. [10]
During radial abduction the scaphoid is tilted towards the palmar side which allows the trapezium and trapezoid to approach the radius. Because the trapezoid is rigidly attached to the second metacarpal bone to which also the flexor carpi radialis and extensor carpi radialis are attached, radial abduction effectively pulls this combined structure towards the radius. During radial abduction the pisiform traverses the greatest path of all carpal bones. [9] Radial abduction is produced by (in order of importance) extensor carpi radialis longus, abductor pollicis longus, extensor pollicis longus, flexor carpi radialis, and flexor pollicis longus. [11]
Ulnar adduction causes a tilting or dorsal shifting of the proximal row of carpal bones.[9]
It is produced by extensor carpi ulnaris, flexor carpi ulnaris, extensor digitorum, and extensor digiti minimi.[11]
Both radial abduction and ulnar adduction occurs around a dorsopalmar axis running through the head of the capitate bone.
[9]
During palmar flexion the proximal carpal bones are displaced towards the dorsal side and towards the palmar side during dorsiflexion. While flexion and extension consist of movements around a pair of transverse axes — passing through the lunate bone for the proximal row and through the capitate bone for the distal row — palmar flexion occurs mainly in the radiocarpal joint and dorsiflexion in the midcarpal joint. [10]
Dorsiflexion is produced by (in order of importance) extensor digitorum, extensor carpi radialis longus, extensor carpi radialis brevis, extensor indicis, extensor pollicis longus, and extensor digiti minimi. Palmar flexion is produced by (in order of importance) flexor digitorum superficialis, flexor digitorum profundus, flexor carpi ulnaris, flexor pollicis longus, flexor carpi radialis, and abductor pollicis longus.
[11]
Combined with movements in both the elbow and shoulder joints, intermediate or combined movements in the wrist approximate those of a ball-and-socket joint with some necessary restrictions, such as maximum palmar flexion blocking abduction.[10]
Anteroposterior gliding movements between adjacent carpal bones or along the midcarpal joint can be achieved by stabilizing individual bones while moving another (i.e. gripping the bone between the thumb and index finger). [12]
The structure of the carpus varies widely between different groups of tetrapods, even among those that retain the full set of five digits. In primitive fossil amphibians, such as Eryops, the carpus consists of three rows of bones; a proximal row of three carpals, a second row of four bones, and a distal row of five bones. The proximal carpals are referred to as the radiale, intermediale, and ulnare, after their proximal articulations, and are homologous with the scaphoid, lunate, and triquetal bones respectively. The remaining bones are simply numbered, as the first to fourth centralia (singular: centrale), and the first to fifth distal carpals. Primitively, each of the distal bones appears to have articulated with a single metacarpal.
However, the vast majority of later vertebrates, including modern amphibians, have undergone varying degrees of loss and fusion of these primitive bones, resulting in a smaller number of carpals. Almost all mammals and reptiles, for example, have lost the fifth distal carpal, and have only a single centrale - and even this is missing in humans. The pisiform bone is somewhat unusual, in that it first appears in primitive reptiles, and is never found in amphibians.
Because many tetrapods have less than five digits on the forelimb, even greater degrees of fusion are common, and a huge array of different possible combinations are found. The wing of a modern bird, for example, has only two remaining carpals; the radiale (the scaphoid of mammals) and a bone formed from the fusion of four of the distal carpals.[13]
In some macropods, the scaphoid and lunar bones are fused into the scapholunar bone.[14]
In crustaceans, "carpus" is the scientific term for the claws or "pincers" present on some legs. (See Decapod anatomy)
The Latin word "carpus" is derived from Greek καρπὁς meaning "wrist". The root "carp-" translates to "pluck", an action performed by the wrist.[15]
Position of carpal bones (shown in red). Animation.
Carpal bones of the left wrist. Eight different colors represent eight different carpal bones respectively.
Carpal bones of the left wrist. Close up.
Carpal bones.
Carpal bones detailed.
Wikimedia Commons has media related to Carpus. |
Look up carpal bones in Wiktionary, the free dictionary. |
Bones of the arm | |||||||
---|---|---|---|---|---|---|---|
Shoulder girdle, clavicle |
| ||||||
Scapula |
| ||||||
Humerus |
| ||||||
Forearm |
| ||||||
Hand |
|
Authority control |
|
---|
全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.
リンク元 | 「手根骨」 |
関連記事 | 「carpal」 |
舟状骨 | scaphoid |
月状骨 | lunate |
三角骨 | triquetrum |
豆状骨 | pisiform |
大菱形骨 | trapezium |
小菱形骨 | trapezoid |
有頭骨 | capitate |
有鈎骨 | hamate |
年齢 | 手根骨+ 橈骨遠位端+ 尺骨遠位端 |
1 | 2 |
2 | 3 |
3 | 4 |
4 | 5 |
5 | 6 |
6 | 7 |
7 | 8 |
8 | 9 |
9 | 10 |
10 | 10 |
11 | 10 |
12 | 10 |
Henry Gray (1825-1861). Anatomy of the Human Body. 1918.
.