random variable

• 確率変数

WordNet

1. liable to or capable of change; "rainfall in the tropics is notoriously variable"; "variable winds"; "variable expenses"
2. a quantity that can assume any of a set of values (同)variable quantity
3. a symbol (like x or y) that is used in mathematical or logical expressions to represent a variable quantity
4. something that is likely to vary; something that is subject to variation; "the weather is one variable to be considered"
5. (used of a device) designed so that a property (as e.g. light) can be varied; "a variable capacitor"; "variable filters in front of the mercury xenon lights"
6. lacking any definite plan or order or purpose; governed by or depending on chance; "a random choice"; "bombs fell at random"; "random movements"
7. the basic unit of money in South Africa; equal to 100 cents

PrepTutorEJDIC

1. 『変わりやすい』,一定しない,気まぐれの / 変えられる,可変の,調節できる / 《英》《遠回しに》(演技などが)むらがある / 変化するもの,変化しやすいもの / (数学で)変数
2. 『手当たりしだいの』,任意の;行き当たりばったりの
3. ラント(南アフリカ共和国の通貨の単位)

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2017/10/26 09:21:51」(JST)

wiki en

[Wiki en表示]

Part of a series on Statistics
Probability theory
Probability axioms
Probability space Sample space Elementary event Event Random variable Probability measure
Complementary event Joint probability Marginal probability Conditional probability
Independence Conditional independence Law of total probability Law of large numbers Bayes' theorem Boole's inequality
Venn diagram Tree diagram

In probability and statistics, a random variable, random quantity, aleatory variable, or stochastic variable is a variable whose possible values are numerical outcomes of a random phenomenon. As a function, a random variable is required to be measurable, which rules out certain pathological cases where the quantity which the random variable returns is infinitely sensitive to small changes in the outcome.

It is common that these outcomes depend on some physical variables that are not well understood. For example, when you toss a coin, the final outcome of heads or tails depends on the uncertain physics. Which outcome will be observed is not certain. Of course the coin could get caught in a crack in the floor, but such a possibility is excluded from consideration. The domain of a random variable is the set of possible outcomes. In the case of the coin, there are only two possible outcomes, namely heads or tails. Since one of these outcomes must occur, either the event that the coin lands heads or the event that the coin lands tails must have non-zero probability.

A random variable is defined as a function that maps outcomes to numerical quantities (labels), typically real numbers. In this sense, it is a procedure for assigning a numerical quantity to each physical outcome, and, contrary to its name, this procedure itself is neither random nor variable. What is random is the unstable physics that describes how the coin lands, and the uncertainty of which outcome will actually be observed.

A random variable's possible values might represent the possible outcomes of a yet-to-be-performed experiment, or the possible outcomes of a past experiment whose already-existing value is uncertain (for example, due to imprecise measurements or quantum uncertainty). They may also conceptually represent either the results of an "objectively" random process (such as rolling a die) or the "subjective" randomness that results from incomplete knowledge of a quantity. The meaning of the probabilities assigned to the potential values of a random variable is not part of probability theory itself but is instead related to philosophical arguments over the interpretation of probability. The mathematics works the same regardless of the particular interpretation in use.

A random variable has a probability distribution, which specifies the probability that its value falls in any given interval. Random variables can be discrete, that is, taking any of a specified finite or countable list of values, endowed with a probability mass function characteristic of the random variable's probability distribution; or continuous, taking any numerical value in an interval or collection of intervals, via a probability density function that is characteristic of the random variable's probability distribution; or a mixture of both types. Two random variables with the same probability distribution can still differ in terms of their associations with, or independence from, other random variables. The realizations of a random variable, that is, the results of randomly choosing values according to the variable's probability distribution function, are called random variates.

The formal mathematical treatment of random variables is a topic in probability theory. In that context, a random variable is understood as a function defined on a sample space whose outputs are numerical values.

Definition

A random variable $X\colon \Omega \to E$ is a measurable function from a set of possible outcomes $\Omega$ to a measurable space $E$. The technical axiomatic definition requires $\Omega$ to be a probability space (see Measure-theoretic definition). Usually $X$ is real-valued (i.e. $E=\mathbb {R}$).

A random variable does not return a probability. The probability of a measurable set of outcomes (i.e. an event) is given by the probability measure $P$ with which $\Omega$ is equipped. Rather, $X$ returns a numerical quantity of outcomes in $\Omega$ — e.g. the number of heads in a random collection of coin flips, or the height of a random person. The probability that $X$ takes value $\leq 3$ is the probability measure of the set of outcomes $\{\omega \in \Omega :X(\omega )\leq 3\}$, denoted $P(X\leq 3).$

Standard case

In many cases, $E=$ $\mathbb {R}$. In some contexts, the term random element (see Extensions) is used to denote a random variable not of this form.

When the image (or range) of $X$ is finite or countably infinite, the variable and its distribution can be described by a probability mass function which assigns a probability to each value in the image of $X$. If the image is uncountably infinite then $X$ is called a continuous random variable. In the special case that it is absolutely continuous, its distribution can be described by a probability density function, which assigns probabilities to intervals; in particular, each individual point must necessarily have probability zero for an absolutely continuous random variable. Not all continuous random variables are absolutely continuous, for example a mixture distribution. Such random variables cannot be described by a probability density or a probability mass function.

Any random variable can be described by its cumulative distribution function, which describes the probability that the random variable will be less than or equal to a certain value.

Extensions

The term "random variable" in statistics is traditionally limited to the real-valued case ($E=\mathbb {R}$). In this case, the structure of the real numbers makes it possible to define quantities such as the expected value and variance of a random variable, its cumulative distribution function, and the moments of its distribution.

However, the definition above is valid for any measurable space $E$ of values. Thus one can consider random elements of other sets $E$, such as random boolean values, categorical values, complex numbers, vectors, matrices, sequences, trees, sets, shapes, manifolds, and functions. One may then specifically refer to a random variable of type $E$, or an $E$-valued random variable.

This more general concept of a random element is particularly useful in disciplines such as graph theory, machine learning, natural language processing, and other fields in discrete mathematics and computer science, where one is often interested in modeling the random variation of non-numerical data structures. In some cases, it is nonetheless convenient to represent each element of $E$ using one or more real numbers. In this case, a random element may optionally be represented as a vector of real-valued random variables (all defined on the same underlying probability space $\Omega$, which allows the different random variables to covary). For example:

• A random word may be represented as a random integer that serves as an index into the vocabulary of possible words. Alternatively, it can be represented as a random indicator vector whose length equals the size of the vocabulary, where the only values of positive probability are $(1\ 0\ 0\ 0\ \cdots )$, $(0\ 1\ 0\ 0\ \cdots )$, $(0\ 0\ 1\ 0\ \cdots )$ and the position of the 1 indicates the word.
• A random sentence of given length $N$ may be represented as a vector of $N$ random words.
• A random graph on $N$ given vertices may be represented as a $N\times N$ matrix of random variables, whose values specify the adjacency matrix of the random graph.
• A random function $F$ may be represented as a collection of random variables $F(x)$, giving the function's values at the various points $x$ in the function's domain. The $F(x)$ are ordinary real-valued random variables provided that the function is real-valued. For example, a stochastic process is a random function of time, a random vector is a random function of some index set such as $1,2,\ldots ,n$, and random field is a random function on any set (typically time, space, or a discrete set).

Examples

Discrete random variable

In an experiment a person may be chosen at random, and one random variable may be the person's height. Mathematically, the random variable is interpreted as a function which maps the person to the person's height. Associated with the random variable is a probability distribution that allows the computation of the probability that the height is in any subset of possible values, such as the probability that the height is between 180 and 190 cm, or the probability that the height is either less than 150 or more than 200 cm.

Another random variable may be the person's number of children; this is a discrete random variable with non-negative integer values. It allows the computation of probabilities for individual integer values – the probability mass function (PMF) – or for sets of values, including infinite sets. For example, the event of interest may be "an even number of children". For both finite and infinite event sets, their probabilities can be found by adding up the PMFs of the elements; that is, the probability of an even number of children is the infinite sum $\operatorname {PMF} (0)+\operatorname {PMF} (2)+\operatorname {PMF} (4)+\cdots$.

In examples such as these, the sample space (the set of all possible persons) is often suppressed, since it is mathematically hard to describe, and the possible values of the random variables are then treated as a sample space. But when two random variables are measured on the same sample space of outcomes, such as the height and number of children being computed on the same random persons, it is easier to track their relationship if it is acknowledged that both height and number of children come from the same random person, for example so that questions of whether such random variables are correlated or not can be posed.

Coin toss

The possible outcomes for one coin toss can be described by the sample space $\Omega =\{{\text{heads}},{\text{tails}}\}$. We can introduce a real-valued random variable $Y$ that models a $1 payoff for a successful bet on heads as follows:

$Y(\omega )={\begin{cases}1,&{\text{if }}\omega ={\text{heads}},\\[6pt]0,&{\text{if }}\omega ={\text{tails}}.\end{cases}}$

If the coin is a fair coin, Y has a probability mass function $f_{Y}$ given by:

$f_{Y}(y)={\begin{cases}{\tfrac {1}{2}},&{\text{if }}y=1,\\[6pt]{\tfrac {1}{2}},&{\text{if }}y=0,\end{cases}}$

Dice roll

If the sample space is the set of possible numbers rolled on two dice, and the random variable of interest is the sum S of the numbers on the two dice, then S is a discrete random variable whose distribution is described by the probability mass function plotted as the height of picture columns here.

A random variable can also be used to describe the process of rolling dice and the possible outcomes. The most obvious representation for the two-dice case is to take the set of pairs of numbers n₁ and n₂ from {1, 2, 3, 4, 5, 6} (representing the numbers on the two dice) as the sample space. The total number rolled (the sum of the numbers in each pair) is then a random variable X given by the function that maps the pair to the sum:

$X((n_{1},n_{2}))=n_{1}+n_{2}$

and (if the dice are fair) has a probability mass function ƒ_X given by:

$f_{X}(S)={\frac {\min(S-1,13-S)}{36}},{\text{ for }}S\in \{2,3,4,5,6,7,8,9,10,11,12\}$

Continuous random variable

An example of a continuous random variable would be one based on a spinner that can choose a horizontal direction. Then the values taken by the random variable are directions. We could represent these directions by North, West, East, South, Southeast, etc. However, it is commonly more convenient to map the sample space to a random variable which takes values which are real numbers. This can be done, for example, by mapping a direction to a bearing in degrees clockwise from North. The random variable then takes values which are real numbers from the interval [0, 360), with all parts of the range being "equally likely". In this case, X = the angle spun. Any real number has probability zero of being selected, but a positive probability can be assigned to any range of values. For example, the probability of choosing a number in [0, 180] is  ¹⁄₂. Instead of speaking of a probability mass function, we say that the probability density of X is 1/360. The probability of a subset of [0, 360) can be calculated by multiplying the measure of the set by 1/360. In general, the probability of a set for a given continuous random variable can be calculated by integrating the density over the given set.

Mixed type

An example of a random variable of mixed type would be based on an experiment where a coin is flipped and the spinner is spun only if the result of the coin toss is heads. If the result is tails, X = −1; otherwise X = the value of the spinner as in the preceding example. There is a probability of  ¹⁄₂ that this random variable will have the value −1. Other ranges of values would have half the probabilities of the last example.

Measure-theoretic definition

The most formal, axiomatic definition of a random variable involves measure theory. Continuous random variables are defined in terms of sets of numbers, along with functions that map such sets to probabilities. Because of various difficulties (e.g. the Banach–Tarski paradox) that arise if such sets are insufficiently constrained, it is necessary to introduce what is termed a sigma-algebra to constrain the possible sets over which probabilities can be defined. Normally, a particular such sigma-algebra is used, the Borel σ-algebra, which allows for probabilities to be defined over any sets that can be derived either directly from continuous intervals of numbers or by a finite or countably infinite number of unions and/or intersections of such intervals.

The measure-theoretic definition is as follows.

Let $(\Omega ,{\mathcal {F}},P)$ be a probability space and $(E,{\mathcal {E}})$ a measurable space. Then an $(E,{\mathcal {E}})$-valued random variable is a measurable function $X\colon \Omega \to E$, which means that, for every subset $B\in {\mathcal {E}}$, its preimage $X^{-1}(B)\in {\mathcal {F}}$ where $X^{-1}(B)=\{\omega :X(\omega )\in B\}$. This definition enables us to measure any subset $B\in {\mathcal {E}}$ in the target space by looking at its preimage, which by assumption is measurable.

In more intuitive terms, a member of $\Omega$ is a possible outcome, a member of ${\mathcal {F}}$ is a measurable subset of possible outcomes, the function $P$ gives the probability of each such measurable subset, $E$ represents the set of values that the random variable can take (such as the set of real numbers), and a member of ${\mathcal {E}}$ is a "well-behaved" (measurable) subset of $E$ (those for which you might want to find the probability). The random variable is then a function from any outcome to a quantity, such that the outcomes leading to any useful subset of quantities for the random variable have a well-defined probability.

When $E$ is a topological space, then the most common choice for the σ-algebra ${\mathcal {E}}$ is the Borel σ-algebra ${\mathcal {B}}(E)$, which is the σ-algebra generated by the collection of all open sets in $E$. In such case the $(E,{\mathcal {E}})$-valued random variable is called the $E$-valued random variable. Moreover, when space $E$ is the real line $\mathbb {R}$, then such a real-valued random variable is called simply the random variable.

Real-valued random variables

In this case the observation space is the set of real numbers. Recall, $(\Omega ,{\mathcal {F}},P)$ is the probability space. For real observation space, the function $X\colon \Omega \rightarrow \mathbb {R}$ is a real-valued random variable if

$\{\omega :X(\omega )\leq r\}\in {\mathcal {F}}\qquad \forall r\in \mathbb {R} .$

This definition is a special case of the above because the set $\{(-\infty ,r]:r\in \mathbb {R} \}$ generates the Borel σ-algebra on the set of real numbers, and it suffices to check measurability on any generating set. Here we can prove measurability on this generating set by using the fact that $\{\omega :X(\omega )\leq r\}=X^{-1}((-\infty ,r])$.

Distribution functions of random variables

If a random variable $X\colon \Omega \to \mathbb {R}$ defined on the probability space $(\Omega ,{\mathcal {F}},P)$ is given, we can ask questions like "How likely is it that the value of $X$ is equal to 2?". This is the same as the probability of the event $\{\omega :X(\omega )=2\}\,\!$ which is often written as $P(X=2)\,\!$ or $p_{X}(2)$ for short.

Recording all these probabilities of output ranges of a real-valued random variable $X$ yields the probability distribution of $X$. The probability distribution "forgets" about the particular probability space used to define $X$ and only records the probabilities of various values of $X$. Such a probability distribution can always be captured by its cumulative distribution function

$F_{X}(x)=\operatorname {P} (X\leq x)$

and sometimes also using a probability density function, $p_{X}$. In measure-theoretic terms, we use the random variable $X$ to "push-forward" the measure $P$ on $\Omega$ to a measure $p_{X}$ on $\mathbb {R}$. The underlying probability space $\Omega$ is a technical device used to guarantee the existence of random variables, sometimes to construct them, and to define notions such as correlation and dependence or independence based on a joint distribution of two or more random variables on the same probability space. In practice, one often disposes of the space $\Omega$ altogether and just puts a measure on $\mathbb {R}$ that assigns measure 1 to the whole real line, i.e., one works with probability distributions instead of random variables.

Moments

The probability distribution of a random variable is often characterised by a small number of parameters, which also have a practical interpretation. For example, it is often enough to know what its "average value" is. This is captured by the mathematical concept of expected value of a random variable, denoted $\operatorname {E} [X]$, and also called the first moment. In general, $\operatorname {E} [f(X)]$ is not equal to $f(\operatorname {E} [X])$. Once the "average value" is known, one could then ask how far from this average value the values of $X$ typically are, a question that is answered by the variance and standard deviation of a random variable. $\operatorname {E} [X]$ can be viewed intuitively as an average obtained from an infinite population, the members of which are particular evaluations of $X$.

Mathematically, this is known as the (generalised) problem of moments: for a given class of random variables $X$, find a collection $\{f_{i}\}$ of functions such that the expectation values $\operatorname {E} [f_{i}(X)]$ fully characterise the distribution of the random variable $X$.

Moments can only be defined for real-valued functions of random variables (or complex-valued, etc.). If the random variable is itself real-valued, then moments of the variable itself can be taken, which are equivalent to moments of the identity function $f(X)=X$ of the random variable. However, even for non-real-valued random variables, moments can be taken of real-valued functions of those variables. For example, for a categorical random variable X that can take on the nominal values "red", "blue" or "green", the real-valued function $[X={\text{green}}]$ can be constructed; this uses the Iverson bracket, and has the value 1 if $X$ has the value "green", 0 otherwise. Then, the expected value and other moments of this function can be determined.

Functions of random variables

A new random variable Y can be defined by applying a real Borel measurable function $g\colon \mathbb {R} \rightarrow \mathbb {R}$ to the outcomes of a real-valued random variable $X$. The cumulative distribution function of $Y\,\!$ is

$F_{Y}(y)=\operatorname {P} (g(X)\leq y).$

If function $g$ is invertible, i.e., $g^{-1}$ exists, and is either increasing or decreasing, then the previous relation can be extended to obtain

$F_{Y}(y)=\operatorname {P} (g(X)\leq y)={\begin{cases}\operatorname {P} (X\leq g^{-1}(y))=F_{X}(g^{-1}(y)),&{\text{if }}g^{-1}{\text{ increasing}},\\\\\operatorname {P} (X\geq g^{-1}(y))=1-F_{X}(g^{-1}(y)),&{\text{if }}g^{-1}{\text{ decreasing}}.\end{cases}}$

and, again with the same hypotheses of invertibility of $g$, assuming also differentiability, we can find the relation between the probability density functions by differentiating both sides with respect to $y$, in order to obtain

$f_{Y}(y)=f_{X}(g^{-1}(y))\left|{\frac {dg^{-1}(y)}{dy}}\right|.$

If there is no invertibility of $g$ but each $y$ admits at most a countable number of roots (i.e., a finite, or countably infinite, number of $x_{i}$ such that $y=g(x_{i})$) then the previous relation between the probability density functions can be generalized with

$f_{Y}(y)=\sum _{i}f_{X}(g_{i}^{-1}(y))\left|{\frac {dg_{i}^{-1}(y)}{dy}}\right|$

where $x_{i}=g_{i}^{-1}(y)$. The formulas for densities do not demand $g$ to be increasing.

In the measure-theoretic, axiomatic approach to probability, if we have a random variable $X\!$ on $\Omega \,\!$ and a Borel measurable function $g\colon \mathbb {R} \rightarrow \mathbb {R}$, then $Y=g(X)\,\!$ will also be a random variable on $\Omega \,\!$, since the composition of measurable functions is also measurable. (However, this is not true if $g$ is Lebesgue measurable.) The same procedure that allowed one to go from a probability space $(\Omega ,P)\,\!$ to $(\mathbb {R} ,dF_{X})$ can be used to obtain the distribution of $Y\,\!$.

Example 1

Let $X$ be a real-valued, continuous random variable and let $Y=X^{2}$.

$F_{Y}(y)=\operatorname {P} (X^{2}\leq y).$

If $y<0$, then $P(X^{2}\leq y)=0$, so

$F_{Y}(y)=0\qquad {\hbox{if}}\quad y<0.$

If $y\geq 0$, then

$\operatorname {P} (X^{2}\leq y)=\operatorname {P} (|X|\leq {\sqrt {y}})=\operatorname {P} (-{\sqrt {y}}\leq X\leq {\sqrt {y}}),$

so

$F_{Y}(y)=F_{X}({\sqrt {y}})-F_{X}(-{\sqrt {y}})\qquad {\hbox{if}}\quad y\geq 0.$

Example 2

Suppose $X$ is a random variable with a cumulative distribution

$F_{X}(x)=P(X\leq x)={\frac {1}{(1+e^{-x})^{\theta }}}$

where $\theta >0$ is a fixed parameter. Consider the random variable $Y=\mathrm {log} (1+e^{-X}).$ Then,

$F_{Y}(y)=P(Y\leq y)=P(\mathrm {log} (1+e^{-X})\leq y)=P(X\geq -\mathrm {log} (e^{y}-1)).\,$

The last expression can be calculated in terms of the cumulative distribution of $X,$ so

$F_{Y}(y)=1-F_{X}(-\mathrm {log} (e^{y}-1))\,$

$=1-{\frac {1}{(1+e^{\mathrm {log} (e^{y}-1)})^{\theta }}}$

$=1-{\frac {1}{(1+e^{y}-1)^{\theta }}}$

$=1-e^{-y\theta }.\,$

which is the cumulative distribution function (cdf) of an exponential distribution.

Example 3

Suppose $X$ is a random variable with a standard normal distribution, whose density is

$f_{X}(x)={\frac {1}{\sqrt {2\pi }}}e^{-x^{2}/2}.$

Consider the random variable $Y=X^{2}.$ We can find the density using the above formula for a change of variables:

$f_{Y}(y)=\sum _{i}f_{X}(g_{i}^{-1}(y))\left|{\frac {dg_{i}^{-1}(y)}{dy}}\right|.$

In this case the change is not monotonic, because every value of $Y$ has two corresponding values of $X$ (one positive and negative). However, because of symmetry, both halves will transform identically, i.e.,

$f_{Y}(y)=2f_{X}(g^{-1}(y))\left|{\frac {dg^{-1}(y)}{dy}}\right|.$

The inverse transformation is

$x=g^{-1}(y)={\sqrt {y}}$

and its derivative is

${\frac {dg^{-1}(y)}{dy}}={\frac {1}{2{\sqrt {y}}}}.$

Then,

$f_{Y}(y)=2{\frac {1}{\sqrt {2\pi }}}e^{-y/2}{\frac {1}{2{\sqrt {y}}}}={\frac {1}{\sqrt {2\pi y}}}e^{-y/2}.$

This is a chi-squared distribution with one degree of freedom.

Equivalence of random variables

There are several different senses in which random variables can be considered to be equivalent. Two random variables can be equal, equal almost surely, or equal in distribution.

In increasing order of strength, the precise definition of these notions of equivalence is given below.

Equality in distribution

If the sample space is a subset of the real line, random variables X and Y are equal in distribution (denoted $X{\stackrel {d}{=}}Y$) if they have the same distribution functions:

$\operatorname {P} (X\leq x)=\operatorname {P} (Y\leq x)\quad {\hbox{for all}}\quad x.$

To be equal in distribution, random variables need not to be defined on the same probability space. Two random variables having equal moment generating functions have the same distribution. This provides, for example, a useful method of checking equality of certain functions of i.i.d. random variables. However, the moment generating function exists only for distributions that have a defined Laplace transform.

Almost sure equality

Two random variables X and Y are equal almost surely (denoted $X{\stackrel {a.s.}{=}}Y$) if, and only if, the probability that they are different is zero:

$\operatorname {P} (X\neq Y)=0.$

For all practical purposes in probability theory, this notion of equivalence is as strong as actual equality. It is associated to the following distance:

$d_{\infty }(X,Y)=\mathrm {ess} \sup _{\omega }|X(\omega )-Y(\omega )|,$

where "ess sup" represents the essential supremum in the sense of measure theory.

Equality

Finally, the two random variables X and Y are equal if they are equal as functions on their measurable space:

$X(\omega )=Y(\omega )\qquad {\hbox{for all }}\omega .$

Convergence

A significant theme in mathematical statistics consists of obtaining convergence results for certain sequences of random variables; for instance the law of large numbers and the central limit theorem.

There are various senses in which a sequence (X_n) of random variables can converge to a random variable X. These are explained in the article on convergence of random variables.

See also

• Aleatoricism
• Algebra of random variables
• Event (probability theory)
• Multivariate random variable
• Observable variable
• Probability distribution
• Random element
• Random function
• Random measure
• Random number generator produces a random value
• Random vector
• Randomness
• Stochastic process

References

Literature

• Fristedt, Bert; Gray, Lawrence (1996). A modern approach to probability theory. Boston: Birkhäuser. ISBN 3-7643-3807-5. 
• Kallenberg, Olav (1986). Random Measures (4th ed.). Berlin: Akademie Verlag. ISBN 0-12-394960-2. MR 0854102. 
• Kallenberg, Olav (2001). Foundations of Modern Probability (2nd ed.). Berlin: Springer Verlag. ISBN 0-387-95313-2. 
• Papoulis, Athanasios (1965). Probability, Random Variables, and Stochastic Processes (9th ed.). Tokyo: McGraw–Hill. ISBN 0-07-119981-0. 

External links

• Hazewinkel, Michiel, ed. (2001) [1994], "Random variable", Encyclopedia of Mathematics, Springer Science+Business Media B.V. / Kluwer Academic Publishers, ISBN 978-1-55608-010-4 
• Zukerman, Moshe (2014), Introduction to Queueing Theory and Stochastic Teletraffic Models (PDF) 
• Zukerman, Moshe (2014), Basic Probability Topics (PDF) 

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

• 1. システマティックレビューおよびメタアナリシス systematic review and meta analysis
• 2. 冠動脈バイパス術のための伏在静脈切除後の蜂巣炎再発 recurrent cellulitis after saphenous venectomy for coronary artery bypass graft surgery
• 3. 心電図チュートリアル：その他の診断 ecg tutorial miscellaneous diagnoses
• 4. 心房粗動における心拍数コントロール control of ventricular rate in atrial flutter
• 5. パーキンソン病における症状の変動およびジスキネジア motor fluctuations and dyskinesia in parkinson disease

English Journal

• Caries correlates strongly to salivary levels of MMP-8.

• Hedenbjörk-Lager A1, Bjørndal L, Gustafsson A, Sorsa T, Tjäderhane L, Akerman S, Ericson D.
• Caries research.Caries Res.2015;49(1):1-8. doi: 10.1159/000360625. Epub 2014 Jul 31.
• The caries process in dentin involves the degradation of both mineral and organic matrix. The demineralization has been demonstrated to be caused by bacterial acids. However, the collagen degradation is considered to be initiated by endogenous proteolytic enzymes, mainly collagenolytic matrix metall
• PMID 25096527

• Relationships between sleeping habits, sedentary leisure activities and childhood overweight and obesity.

• Busto-Zapico R1, Amigo-Vázquez I, Peña-Suárez E, Fernández-Rodríguez C.
• Psychology, health & medicine.Psychol Health Med.2014 Dec;19(6):667-72. doi: 10.1080/13548506.2013.878805. Epub 2014 Jan 13.
• The aim of this study is to show how sedentary leisure activities and a decrease in hours of sleep interact to lead to an increase in the body mass index (BMI) in children. A random sample of 291 nine-year-old and ten-year-old schoolchildren from Asturias (Spain) was taken. A cross-sectional design
• PMID 24410653

• Conserved patterns of incomplete reporting in pre-vaccine era childhood diseases.

• Gunning CE1, Erhardt E2, Wearing HJ3.
• Proceedings. Biological sciences / The Royal Society.Proc Biol Sci.2014 Nov 7;281(1794). pii: 20140886. doi: 10.1098/rspb.2014.0886.
• Incomplete observation is an important yet often neglected feature of observational ecological timeseries. In particular, observational case report timeseries of childhood diseases have played an important role in the formulation of mechanistic dynamical models of populations and metapopulations. Ye
• PMID 25232131

Japanese Journal

• 近似正規乱数として多点分布確率変数を用いたときの確率微分方程式の実現解の安定領域

• 石森 勇次
• 富山県立大学紀要 = Bulletin of Toyama Prefectural University 24, 14-21, 2014-03
• NAID 40020053830

• 実無線環境の無線エラーと可変通信速度を考慮したM2M網における端末グループ単位の公平な輻輳制御方式

• 小川 猛志,小田部 悟士,西沢 秀樹 [他]
• 電気学会論文誌. C, 電子・情報・システム部門誌 = IEEJ transactions on electronics, information and systems 134(1), 15-27, 2014-01
• NAID 40019952092

• Effect of Multivariate Cauchy Mutation in Evolutionary Programming

• LEE Chang-Yong,PARK Yong-Jin
• IEICE Transactions on Information and Systems E97.D(4), 821-829, 2014
• … For a mutation of n variables, while the conventional method utilizes n independent random variables from a univariate Cauchy distribution, the proposed method adopts n mutually dependent random variables that satisfy a multivariate Cauchy distribution. … The multivariate Cauchy distribution naturally has higher probabilities of generating random variables in inter-variable regions than the univariate Cauchy distribution due to the mutual dependence among variables. …
• NAID 130003394908

Related Links

• Random Variables - Math is Fun - Maths Resources

Notice the different uses of X and x: X is the Random Variable "The sum of the scores on the two dice". x is a value that X can take. Continuous Random Variables can be either Discrete or Continuous: Discrete Data can only take ...

• What is a Random Variable? - Statistics and Probability

What is a random variable? This lesson defines random variables. Explains difference between discrete vs continuous and finite vs infinite random variables. ... When the value of a variable is determined by a chance ...

Related Pictures

---

★リンクテーブル★

関連記事	「variable」「random」

「variable」

　　[★]

• adj.

• 可変性の、可変の、不定の、変量の、(数学)変数

関

fluent、inconsistent、indefinite、variability、variably、versatile

　 　 　 　 　 　

「random」

　　[★]

• adj.

• ランダムな、無秩序な、無作為の

関

at random、chaos、chaotic、disorder、randomly