出典(authority):フリー百科事典『ウィキペディア(Wikipedia)』「2016/03/22 18:36:56」(JST)
An oxide /ˈɒksaɪd/ is a chemical compound that contains at least one oxygen atom and one other element[1] in its chemical formula. Metal oxides typically contain an anion of oxygen in the oxidation state of −2. Most of the Earth's crust consists of solid oxides, the result of elements being oxidized by the oxygen in air or in water. Hydrocarbon combustion affords the two principal carbon oxides: carbon monoxide and carbon dioxide. Even materials considered pure elements often develop an oxide coating. For example, aluminium foil develops a thin skin of Al2O3 (called a passivation layer) that protects the foil from further corrosion.[2] Different oxides of the same element are distinguished by Roman numerals denoting their oxidation number, e.g. iron(II) oxide versus iron(III) oxide. .[citation needed]
Due to its electronegativity, oxygen forms stable chemical bonds with almost all elements to give the corresponding oxides. Noble metals (such as gold or platinum) are prized because they resist direct chemical combination with oxygen, and substances like gold(III) oxide must be generated by indirect routes.
Two independent pathways for corrosion of elements are hydrolysis and oxidation by oxygen. The combination of water and oxygen is even more corrosive. Virtually all elements burn in an atmosphere of oxygen, or an oxygen rich environment. In the presence of water and oxygen (or simply air), some elements— sodium—react rapidly, even dangerously, to give the hydroxides. In part for this reason, alkali and alkaline earth metals are not found in nature in their metallic, i.e., native, form. Caesium is so reactive with oxygen that it is used as a getter in vacuum tubes, and solutions of potassium and sodium, so-called NaK are used to deoxygenate and dehydrate some organic solvents. The surface of most metals consists of oxides and hydroxides in the presence of air. A well-known example is aluminium foil, which is coated with a thin film of aluminium oxide that passivates the metal, slowing further corrosion. The aluminium oxide layer can be built to greater thickness by the process of electrolytic anodising. Though solid magnesium and aluminium react slowly with oxygen at STP—they, like most metals, burn in air, generating very high temperatures. Finely grained powders of most metals can be dangerously explosive in air. Consequently, they are often used in Solid-fuel rockets.
In dry oxygen, iron readily forms iron(II) oxide, but the formation of the hydrated ferric oxides, Fe2O3−x(OH)2x, that mainly comprise rust, typically requires oxygen and water. Free oxygen production by photosynthetic bacteria some 3.5 billion years ago precipitated iron out of solution in the oceans as Fe2O3 in the economically important iron ore hematite.
Oxides of most metals adopt polymeric structures. The oxide typically links three metals (e.g., rutile structure) or six metals (carborundum or rock salt structures) Because the M-O bonds are strong, the solids tend to be insoluble in solvents, though they are attacked by acids and bases. The formulas are often deceptively simple. Many are nonstoichiometric compounds.[2]
Although most metal oxides are polymeric, some oxides are molecules. The most famous molecular oxides are carbon dioxide and carbon monoxide. All simple oxides of nitrogen are molecular, e.g., NO, N2O, NO2 and N2O4. Phosphorus pentoxide is a more complex molecular oxide with a deceptive name, the real formula being P4O10. Some polymeric oxides depolymerize when heated to give molecules, examples being selenium dioxide and sulfur trioxide. Tetroxides are rare. The more common examples: ruthenium tetroxide, osmium tetroxide, and xenon tetroxide.
Many oxyanions are known, such as polyphosphates and polyoxometalates. Oxycations are rarer, an example being nitrosonium (NO+). Of course many compounds are known with both oxides and other groups. In organic chemistry, these include ketones and many related carbonyl compounds. For the transition metals, many oxo complexes are known as well as oxyhalides.
Oxides can be reacted by acids or bases. Those reacted only by acids are basic oxides; those reacted only by bases are acidic oxides. Oxides that react with both acids and bases are amphoteric. Metals tend to form basic oxides, non-metals tend to form acidic oxides, and amphoteric oxides are formed by elements near the boundary between metals and non-metals (metalloids).
This reactivity is the basis of many practical processes such, as the extraction of some metals from their ores in the process called hydrometallurgy.
Converting the metal oxide back to the pure metal is called reduction. There are many ways of reduction.
Metals are "won" from their oxides by chemical reduction. A common and cheap reducing agent is carbon in the form of coke. The most prominent example is that of iron ore smelting. Many reactions are involved, but the simplified equation is usually shown as:[2]
Metal oxides can be reduced by organic compounds. This redox process is the basis for many important transformations in chemistry, such as the detoxification of drugs by the P450 enzymes and the production of ethylene oxide, which is converted to antifreeze. In such systems the metal centre transfers an oxide ligand to the organic compound followed by regeneration of the metal oxide, often by oxygen in air.
Metals that are lower in the reactivity series can be reduced by heating alone. For example, silver oxide decomposes at 200 °C:[3]
Metals that are more reactive displaces the oxide of the metals that are less reactive. For example, zinc is more reactive than copper, so it displaces copper (II) oxide to form zinc oxide:
Apart from metals, hydrogen can also displace metal oxides to form hydrogen oxide, also known as water:
Since metals that are reactive form oxides that are stable, some metal oxides must be electrolysed to be reduced. This includes sodium oxide, potassium oxide, calcium oxide, magnesium oxide, and aluminium oxide. The oxides must be molten before immersing graphite electrodes in it:
Oxides of more electropositive elements tend to be basic. They are called basic anhydrides. Exposed to water, they may form basic hydroxides. For example, sodium oxide is basic—when hydrated, it forms sodium hydroxide. Oxides of more electronegative elements tend to be acidic. They are called "acid anhydrides"; adding water, they form oxoacids. For example, dichlorine heptoxide is acid; perchloric acid is a more hydrated form. Some oxides can act as both acid and base. They are amphoteric. An example is aluminium oxide. Some oxides do not show behavior as either acid or base.
The oxide ion has the formula O2−. It is the conjugate base of the hydroxide ion, OH−, and is encountered in ionic solid such as calcium oxide. O2− is unstable in aqueous solution − its affinity for H+ is so great (pKb ~ −38) that it abstracts a proton from a solvent H2O molecule:
The equilibrium constant of aforesaid reactions is pKeq ~ −22
In the 18th century, oxides were named calxes or calces after the calcination process used to produce oxides. Calx was later replaced by oxyd.
Sometimes, metal-oxygen ratios are used to name oxides. Thus, NbO would be called niobium monoxide and TiO2 is titanium dioxide. This naming follows the Greek numerical prefixes. In the older literature and continuing in industry, oxides are named by contracting the element name with "a." Hence alumina, magnesia, chromia, are, respectively, Al2O3, MgO, Cr2O3.
Special types of oxides are peroxide, O22−, and superoxide, O2−. In such species, oxygen is assigned higher oxidation states than oxide.
The chemical formulas of the oxides of the chemical elements in their highest oxidation state are predictable and are derived from the number of valence electrons for that element. Even the chemical formula of O4, tetraoxygen, is predictable as a group 16 element. One exception is copper, for which the highest oxidation state oxide is copper(II) oxide and not copper(I) oxide. Another exception is fluoride, which does not exist as one might expect—as F2O7—but as OF2.[4]
Since fluorine is more electronegative than oxygen, oxygen difluoride (OF2) does not represent an oxide of fluorine, but instead represents a fluoride of oxygen.
The following table gives examples of commonly encountered oxides. Only a few representatives are given, as the number of polyatomic ions encountered in practice is very large.
Name | Formula | Found/Usage |
---|---|---|
Water (hydrogen oxide) | H 2O |
Common solvent, Required by carbon-based life |
Nitrous oxide | N 2O |
Laughing gas, anesthetic (used in a combination with diatomic oxygen (O2) to make Nitrous oxide and oxygen anesthesia), produced by Nitrogen-fixing bacteria, Nitrous, oxidizing agent in rocketry, aerosol propellant, recreational drug, greenhouse gas. Other nitrogen oxides such as NO 2 (Nitrogen dioxide), NO(Nitrogen oxide), N |
Silicon dioxide | SiO 2 |
Sand, quartz |
Iron(II,III) oxide | Fe 3O |
Iron Ore, Rust, along with iron(III) oxide (Fe 2O |
Aluminium oxide | Al 2O |
Aluminium Ore, Alumina, Corundum, Ruby (Corundum with impurities of Chromium). |
Zinc oxide | ZnO | Reqiured for vulcanization of rubber, additive to concrete, sunscreen, skin care lotions, antibacterial and antifungal properties, food additive, white pigment. |
Carbon dioxide | CO 2 |
Constituent of the atmosphere of Earth, the most abundant and important greenhouse gas, used by plants in photosynthesis to make sugars, product of biological processes such as respiration and chemical reactions such as combustion and chemical decomposition of carbonates. CO or Carbon monoxide exists as a product of incomplete combustion and is a highly toxic gas. |
Calcium oxide | CaO | Quicklime (used in construction to make mortar and concrete), used in Self-heating cans due to exothermic reaction with water to produce Calcium hydroxide, possible ingredient in Greek fire and produces limelight when heated over 2,400 °Celsius. |
Look up oxide in Wiktionary, the free dictionary. |
|
|
全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.
リンク元 | 「酸化物」「オキシド」「オキサイド」 |
拡張検索 | 「arterial partial pressure of carbon dioxide」 |
.