v.

遠心する、遠心分離する

n.

遠心機

関: centrifugal、centrifugal separation、centrifugation

WordNet

rotate at very high speed in order to separate the liquids from the solids (同)centrifugate
an apparatus that uses centrifugal force to separate particles from a suspension (同)extractor, separator
tending to move away from a center; "centrifugal force"
conveying information to the muscles from the CNS; "motor nerves" (同)motor
tending away from centralization, as of authority; "the division of Europe into warring blocs produces ever-increasing centrifugal stress"
the process of separating substances of different densities by the use of a centrifuge
subject to the action of an ultracentrifuge
a high speed centrifuge used to determine the relative molecular masses of large molecules in high polymers and proteins

PrepTutorEJDIC

遠心分離機

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2013/12/05 15:06:24」(JST)

wiki en

[Wiki en表示]

This article is about the scientific device. For the Christian camp, see Centrifuge (camps). For spin direction in quantum mechanics, see Spin (physics)#Spin direction.

A laboratory tabletop centrifuge. The rotating unit, called the rotor, has fixed holes drilled at an angle (to the vertical). Test tubes are placed in these slots and the motor is spun. As the centrifugal force is in the horizontal plane and the tubes are fixed at an angle, the particles have to travel only a little distance before they hit the wall and drop down to the bottom. These angle rotors are very popular in the lab for routine use.

A centrifuge is a piece of equipment, generally driven by an electric motor (or, in some older models, by hand), that puts an object in rotation around a fixed axis, applying a force perpendicular to the axis. A centrifuge is also used to separate the components of blood in blood banks. The centrifuge works using the sedimentation principle, where the centripetal acceleration causes denser substances to separate out along the radial direction (the bottom of the tube). By the same token lighter objects will tend to move to the top (of the tube; in the rotating picture, move to the centre).

Theory[edit]

Protocols for centrifugation typically specify the amount of acceleration to be applied to the sample, rather than specifying a rotational speed such as revolutions per minute. This distinction is important because two rotors with different diameters running at the same rotational speed will subject samples to different accelerations. During circular motion the acceleration is the product of the radius and the square of the angular velocity , and the acceleration relative to "g" is traditionally named "relative centrifugal force" (RCF). The acceleration is measured in multiples of "g" (or × "g"), the standard acceleration due to gravity at the Earth's surface, a dimensionless quantity given by the expression:

A 19th-century hand cranked laboratory centrifuge.

where

is earth's gravitational acceleration,

is the rotational radius,

is the angular velocity in radians per unit time

This relationship may be written as

where

is the rotational radius measured in centimetres (cm), and

is rotational speed measured in revolutions per minute (RPM).

History and predecessors[edit]

Early 20th-century advertising poster for a milk separator.

English military engineer Benjamin Robins (1707–1751) invented a whirling arm apparatus to determine drag. In 1864, Antonin Prandtl invented the first dairy centrifuge in order to separate cream from milk. In first continuous centrifugal separator, making its commercial application feasible.

Types[edit]

There are multiple types of centrifuge, which can be classified by intended use or by rotor design:

Types by rotor design: ^[1]^[2]^[3]^[4]

Fixed-angle centrifuges are designed to hold the sample containers at a constant angle relative to the central axis.
Swinging head (or swinging bucket) centrifuges, in contrast to fixed-angle centrifuges, have a hinge where the sample containers are attached to the central rotor. This allows the samples to swing outwards as the centrifuge is spun.
Continuous tubular centrifuges don't have individual sample vessels and are used for high volume applications.

Types by intended use:

Ultracentrifuges are optimized for spinning a rotor at very high speeds and are popular in the fields of molecular biology, biochemistry and polymer science. This type may include preparative or analytical, fixed-angle or swing head varieties.^[3]
Haematocrit centrifuges are used to measure the percentage of red blood cells in whole blood.
Gas centrifuges, including Zippe-type centrifuges

Industrial centrifuges may otherwise be classified according to the type of separation of the high density fraction from the low density one:

Screen centrifuges, where the centrifugal acceleration allows the liquid to pass through a screen of some sort, through which the solids cannot go (due to granulometry larger than the screen gap or due to agglomeration). Common types are:
- Screen/scroll centrifuges
- Pusher centrifuges
- Peeler centrifuges
- Decanter centrifuges, in which there is no physical separation between the solid and liquid phase, rather an accelerated settling due to centrifugal acceleration.
- Continuous liquid; common types are:
  - Solid bowl centrifuges
  - Conical plate centrifuges

Uses[edit]

Isolating suspensions[edit]

Main article: Laboratory centrifuge

Simple centrifuges are used in chemistry, biology, and biochemistry for isolating and separating suspensions. They vary widely in speed and capacity. They usually comprise a rotor containing two, four, six, or many more numbered wells within which the samples, contained in centrifuge tubes, may be placed.

Isotope separation[edit]

Main article: Gas centrifuge

Other centrifuges, the first being the Zippe-type centrifuge, separate isotopes, and these kinds of centrifuges are in use in nuclear power and nuclear weapon programs.

Gas centrifuges are used in uranium enrichment. The heavier isotope of uranium (uranium-238) in the uranium hexafluoride gas tends to concentrate at the walls of the centrifuge as it spins, while the desired uranium-235 isotope is extracted and concentrated with a scoop selectively placed inside the centrifuge.^{[citation needed]} It takes many thousands of centrifugations to enrich uranium enough for use in a nuclear reactor (around 3.5% enrichment),^{[citation needed]} and many thousands more to enrich it to weapons-grade (above 90% enrichment) for use in nuclear weapons.^{[citation needed]}

Aeronautics and astronautics[edit]

Main article: High-G training

The 20 G centrifuge at the NASA Ames Research Center

Human centrifuges are exceptionally large centrifuges that test the reactions and tolerance of pilots and astronauts to acceleration above those experienced in the Earth's gravity.

The US Air Force at Holloman Air Force Base, New Mexico operates a human centrifuge. The centrifuge at Holloman AFB is operated by the aerospace physiology department for the purpose of training and evaluating prospective fighter pilots for high-g flight in Air Force fighter aircraft.^[5]

The use of large centrifuges to simulate a feeling of gravity has been proposed for future long-duration space missions. Exposure to this simulated gravity would prevent or reduce the bone decalcification and muscle atrophy that affect individuals exposed to long periods of freefall. ^[5] ^[6]

The first centrifuges used for human research were used by Erasmus Darwin, the grandfather of Charles Darwin. The first largescale human centrifuge designed for Aeronautical training was created in Germany in 1933.^[7]

Geotechnical centrifuge modeling[edit]

Geotechnical centrifuge modeling is used for physical testing of models involving soils. Centrifuge acceleration is applied to scale models to scale the gravitational acceleration and enable prototype scale stresses to be obtained in scale models. Problems such as building and bridge foundations, earth dams, tunnels, and slope stability, including effects such as blast loading and earthquake shaking.^[8]

Commercial applications[edit]

Centrifuges with a batch weight of up to 2,200 kg per charge are used in the sugar industry to separate the sugar crystals from the mother liquor.^[9]
Standalone centrifuges for drying (hand-washed) clothes – usually with a water outlet.
Centrifuges are used in the attraction Mission: SPACE, located at Epcot in Walt Disney World, which propels riders using a combination of a centrifuge and a motion simulator to simulate the feeling of going into space.
In soil mechanics, centrifuges utilize centrifugal acceleration to match soil stresses in a scale model to those found in reality.
Large industrial centrifuges are commonly used in water and wastewater treatment to dry sludges. The resulting dry product is often termed cake, and the water leaving a centrifuge after most of the solids have been removed is called centrate.
Large industrial centrifuges are also used in the oil industry to remove solids from the drilling fluid.
Disc-stack centrifuges used by some companies in Oil Sands industry to separate small amounts of water and solids from bitumen
Centrifuges are used to separate cream (remove fat) from milk; see Separator (milk).

References and notes[edit]

^ "Basics of Centrifugation". Cole-Parmer. Retrieved 11 March 2012.
^ "Plasmid DNA Separation: Fixed-Angle and Vertical Rotors in the Thermo Scientific Sorvall Discovery™ M120 & M150 Microultracentrifuges" (Thermo Fischer publication)
^ ^a ^b http://uqu.edu.sa/files2/tiny_mce/plugins/filemanager/files/4250119/lectures/1._instr.pdf
^ Heidcamp, Dr. William H. "Appendix F". Cell Biology Laboratory Manual. Gustavus Adolphus College,. Retrieved 11 March 2012.
^ ^a ^b "The Pull of HyperGravity - A NASA researcher is studying the strange effects of artificial gravity on humans.". NASA. Retrieved 11 March 2012.
^ Hsu, Jeremy. "New Artificial Gravity Tests in Space Could Help Astronauts". Space.com. Retrieved 11 March 2012.
^ http://www.dtic.mil/dtic/tr/fulltext/u2/a236267.pdf
^ C. W. W. Ng, Y. H. Wang, L. M. Zhang (2006). Physical Modelling in Geotechnics: proceedings of the Sixth International Conference on Physical Modelling in Geotechnics. Taylor & Francis. p. 135. ISBN 0-415-41586-1.
^ article on centrifugal controls, retrieved on June 5, 2010

External links[edit]

Wikimedia Commons has media related to Centrifuges.

Look up centrifuge in Wiktionary, the free dictionary.

RCF Calculator and Nomograph
Centrifugation Rotor Calculator
Selection of historical centrifuges in the Virtual Laboratory of the Max Planck Institute for the History of Science

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

1. 血液透析装置を用いたプラスマフェレーシスplasmapheresis with hemodialysis equipment [show details]
…(cytapheresis) but have been associated with posttreatment thrombocytopenia and require a dedicated centrifuge device. An increasingly popular and often more efficient alternative is to perform plasma exchange…
2. 手術における血液保存：血液回収surgical blood conservation blood salvage [show details]
…substances, and cellular stroma), concentration of the blood, and eventual reinfusion to the patient . Centrifuge-based RBC salvage with the intraoperative cell salvage machine starts with the surgeon aspirating …
3. 顆粒球輸血granulocyte transfusions [show details]
…(HES) added to the donor blood as it entered the centrifuge bowl to create better separation between the RBC and white blood cell (WBC) layers in the centrifuge. With these improvements, collection of 2 to …
4. 輸血関連循環過負荷（TACO）transfusion associated circulatory overload taco [show details]
…to transfusion, the blood bank may be able to provide smaller "split" units. The blood bank can centrifuge RBCs immediately prior to their administration to remove the anticoagulant/preservative solution…
5. アフェレシス治療（血漿交換または血球アフェレシス）：合併症therapeutic apheresis plasma exchange or cytapheresis complications [show details]
…of the procedure, approximately 200 mL of patient blood is within the apheresis kit tubing and centrifuge. The extracorporeal volume of each kit type can be found in the manufacturer information. With…

English Journal

Effects of hypergravity on adipose-derived stem cell morphology, mechanical property and proliferation.

Tavakolinejad A1, Rabbani M2, Janmaleki M1.
Biochemical and biophysical research communications.Biochem Biophys Res Commun.2015 Aug 21;464(2):473-9. doi: 10.1016/j.bbrc.2015.06.160. Epub 2015 Jul 3.
Alteration in specific inertial conditions can lead to changes in morphology, proliferation, mechanical properties and cytoskeleton of cells. In this report, the effects of hypergravity on morphology of Adipose-Derived Stem Cells (ADSCs) are indicated. ADSCs were repeatedly exposed to discontinuous
PMID 26150354

Micro-scale procedure for enzyme immobilization screening and operational stability assays.

Fernandez-Arrojo L1, Santos-Moriano P, Rodriguez-Colinas B, Ballesteros AO, Plou FJ.
Biotechnology letters.Biotechnol Lett.2015 Aug;37(8):1593-600. doi: 10.1007/s10529-015-1835-z. Epub 2015 Apr 9.
OBJECTIVE: A simple and inexpensive methodology, based on the use of micro-centrifuge filter tubes, is proposed for establishing the best enzyme immobilization conditions.RESULTS: The immobilized biocatalyst is located inside the filter holder during the whole protocol, thus facilitating the incubat
PMID 25854993

Rapid and mild purification method for nanoparticles from a dispersed solution using a monolithic silica disk.

Itoh N1, Santa T1, Kato M2.
Journal of chromatography. A.J Chromatogr A.2015 Jul 24;1404:141-5. doi: 10.1016/j.chroma.2015.05.047. Epub 2015 May 28.
A rapid and mild purification method for nanoparticles using the commercially available monolithic silica disk, MonoSpin(®), was developed. The nanoparticles were purified from a dispersed solution by filtration with the aid of centrifugation at 2290×g for 2min. The purification conditions were ra
PMID 26058950

Method for Controlling Electrical Properties of Single-Layer Graphene Nanoribbons via Adsorbed Planar Molecular Nanoparticles.

Tanaka H1, Arima R2, Fukumori M2, Tanaka D2, Negishi R3, Kobayashi Y3, Kasai S4, Yamada TK5, Ogawa T2.
Scientific reports.Sci Rep.2015 Jul 24;5:12341. doi: 10.1038/srep12341.
A simple method for fabricating single-layer graphene nanoribbons (sGNRs) from double-walled carbon nanotubes (DWNTs) was developed. A sonication treatment was employed to unzip the DWNTs by inducing defects in them through annealing at 500 °C. The unzipped DWNTs yielded double-layered GNRs (dGNR
PMID 26205209