出典(authority):フリー百科事典『ウィキペディア(Wikipedia)』「2016/01/27 00:08:43」(JST)
Sound measurements | |
---|---|
Characteristic
|
Symbols
|
Sound pressure | p, SPL |
Particle velocity | v, SVL |
Particle displacement | δ |
Sound intensity | I, SIL |
Sound power | P, SWL |
Sound energy | W |
Sound energy density | w |
Sound exposure | E, SEL |
Acoustic impedance | Z |
Speed of sound | c |
Audio frequency | AF |
Transmission loss | TL |
|
|
|
Sound pressure or acoustic pressure is the local pressure deviation from the ambient (average, or equilibrium) atmospheric pressure, caused by a sound wave. In air, sound pressure can be measured using a microphone, and in water with a hydrophone. The SI unit of sound pressure is the pascal (Pa).[1]
A sound wave in a transmission medium causes a deviation (sound pressure, a dynamic pressure) in the local ambient pressure, a static pressure.
Sound pressure, denoted p, is defined by
where
In a sound wave, the complementary variable to sound pressure is the particle velocity. Together they determine the sound intensity of the wave.
Sound intensity, denoted I and measured in W·m−2 in SI units, is defined by
where
Acoustic impedance, denoted Z and measured in Pa·m−3·s in SI units, is defined by[2]
where
Specific acoustic impedance, denoted z and measured in Pa·m−1·s in SI units, is defined by[2]
where
The particle displacement of a progressive sine wave is given by
where
It follows that the particle velocity and the sound pressure along the direction of propagation of the sound wave x are given by
where
Taking the Laplace transforms of v and p with respect to time yields
Since , the amplitude of the specific acoustic impedance is given by
Consequently, the amplitude of the particle displacement is related to that of the acoustic velocity and the sound pressure by
When measuring the sound pressure created by an object, it is important to measure the distance from the object as well, since the sound pressure of a spherical sound wave decreases as 1/r from the centre of the sphere (and not as 1/r2, like the sound intensity):[3]
This relationship is an inverse-proportional law.
If the sound pressure p1 is measured at a distance r1 from the centre of the sphere, the sound pressure p2 at another position r2 can be calculated:
The inverse-proportional law for sound pressure comes from the inverse-square law for sound intensity:
Indeed,
where
hence the inverse-proportional law:
The sound pressure may vary in direction from the centre of the sphere as well, so measurements at different angles may be necessary, depending on the situation. An obvious example of a sound source whose spherical sound wave varies in level in different directions is a bullhorn.[citation needed]
Sound pressure level (SPL) or acoustic pressure level is a logarithmic measure of the effective pressure of a sound relative to a reference value.
Sound pressure level, denoted Lp and measured in dB, is defined by[4]
where
The commonly used reference sound pressure in air is[6]
which is often considered as the threshold of human hearing (roughly the sound of a mosquito flying 3 m away). The proper notations for sound pressure level using this reference are Lp/(20 μPa) or Lp (re 20 μPa), but the suffix notations dB SPL, dB(SPL), dBSPL, or dBSPL are very common, even if they are not accepted by the SI.[7]
Most sound level measurements will be made relative to this reference, meaning 1 Pa will equal an SPL of 94 dB. In other media, such as underwater, a reference level of 1 μPa is used.[8] These references are defined in ANSI S1.1-1994.[9]
The lower limit of audibility is defined as SPL of 0 dB, but the upper limit is not as clearly defined. While 1 atm (194 dB Peak or 191 dB SPL) is the largest pressure variation an undistorted sound wave can have in Earth's atmosphere, larger sound waves can be present in other atmospheres or other media such as under water, or through the Earth.
Ears detect changes in sound pressure. Human hearing does not have a flat spectral sensitivity (frequency response) relative to frequency versus amplitude. Humans do not perceive low- and high-frequency sounds as well as they perceive sounds near 2,000 Hz, as shown in the equal-loudness contour. Because the frequency response of human hearing changes with amplitude, three weightings have been established for measuring sound pressure: A, B and C. A-weighting applies to sound pressures levels up to 55 dB, B-weighting applies to sound pressures levels between 55 dB and 85 dB, and C-weighting is for measuring sound pressure levels above 85 dB.[citation needed]
In order to distinguish the different sound measures a suffix is used: A-weighted sound pressure level is written either as dBA or LA. B-weighted sound pressure level is written either as dBB or LB, and C-weighted sound pressure level is written either as dBC or LC. Unweighted sound pressure level is called "linear sound pressure level" and is often written as dBL or just L. Some sound measuring instruments use the letter "Z" as an indication of linear SPL.
The distance of the measuring microphone from a sound source is often omitted when SPL measurements are quoted, making the data useless. In the case of ambient environmental measurements of "background" noise, distance need not be quoted as no single source is present, but when measuring the noise level of a specific piece of equipment the distance should always be stated. A distance of one metre (1 m) from the source is a frequently used standard distance. Because of the effects of reflected noise within a closed room, the use of an anechoic chamber allows for sound to be comparable to measurements made in a free field environment.
According to the inverse proportional law, when sound level Lp1 is measured at a distance r1, the sound level Lp2 at the distance r2 is
The formula for the sum of the sound pressure levels of n incoherent radiating sources is
Inserting the formulas
in the formula for the sum of the sound pressure levels yields
This table needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (March 2009) |
Source of sound | Sound pressure* (Pa) |
Sound pressure level (dBSPL) |
---|---|---|
Shockwave (distorted sound waves > 1 atm; waveform valleys are clipped at zero pressure) | >101,325 | >194 |
Theoretical limit for undistorted sound at 1 atmosphere environmental pressure | 101,325 | 194 |
Stun grenade[10] | 1,600–8,000 | 158–172 |
Simple open-ended thermoacoustic device[11] | 12,619 | 176 |
.30-06 rifle being fired 1 m to shooter's side | 7,265 | 171 |
Rocket launch equipment acoustic tests | 4000 | 165 |
LRAD 1000Xi Long Range Acoustic Device at 1 m[12] | 893 | 153 |
Jet engine at 1 m | 632 | 150 |
Threshold of pain[13][14][15] | 63-200 | 130-140 |
Loudest human voice at 1 inch[15] | 110 | 135 |
Trumpet at 0.5 m[16] | 63.2 | 130 |
Vuvuzela horn at 1 m[17] | 20 | 120 |
Risk of instantaneous noise-induced hearing loss | 20 | 120 |
Jet engine at 100 m | 6.32–200 | 110–140 |
Non-electric chainsaw at 1 m[18] | 6.32 | 110 |
Jack hammer at 1 m | 2 | 100 |
Traffic on a busy roadway at 10 m | 0.2–0.632 | 80–90 |
Hearing damage (over long-term exposure, need not be continuous)[19] | 0.356 | 85 |
Passenger car at 10 m | (2–20)×10−2 | 60–80 |
EPA-identified maximum to protect against hearing loss and other disruptive effects from noise, such as sleep disturbance, stress, learning detriment, etc.[20] | 6.32×10−2 | 70 |
Handheld electric mixer | 65 | |
TV (set at home level) at 1 m | 2×10−2 | 60 |
Washing machine, dishwasher[21] | 42–53 | |
Normal conversation at 1 m | (2–20)×10−3 | 40–60 |
Very calm room | (2–6.32)×10−4 | 20–30 |
Light leaf rustling, calm breathing | 6.32×10−5 | 10 |
Auditory threshold at 1 kHz[19] | 2×10−5 | 0 |
*All values listed are the effective sound pressure unless otherwise stated.
|title=
at position 74 (help)
全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.
リンク元 | 「音圧」 |
関連記事 | 「sound」「pressure」 |
.