出典(authority):フリー百科事典『ウィキペディア(Wikipedia)』「2015/10/20 09:59:28」(JST)
Olefin metathesis is an organic reaction that entails the redistribution of fragments of alkenes (olefins) by the scission and regeneration of carbon-carbon double bonds.[1] Catalysts for this reaction have evolved rapidly for the past few decades. Because of the relative simplicity of olefin metathesis, it often creates fewer undesired by-products and hazardous wastes than alternative organic reactions. For their elucidation of the reaction mechanism and their discovery of a variety of highly efficient and selective catalysts, Yves Chauvin, Robert H. Grubbs, and Richard R. Schrock were collectively awarded the 2005 Nobel Prize in Chemistry.[2]
The reaction is catalyzed by metal complexes. Traditional catalysts are prepared by a reaction of the metal halides with alkylation agents, for example WCl6–EtOH–EtAlCl2. The traditional, industrial catalysts are ill-defined and used mainly for Petroleum products. Modern catalysts are well-defined organometallic compounds that come in two main categories, commonly known as Schrock catalysts and Grubbs' catalysts. Schrock catalysts are molybdenum(IV)- and tungsten(IV)-based, and are examples of Schrock alkylidenes.[3]
Grubbs' catalysts, on the other hand, are ruthenium(II) carbenoid complexes.[4] Grubbs' catalysts are often modified with a chelating isopropoxystyrene ligand to form the related Hoveyda–Grubbs catalyst.
Olefin metathesis was first commercialized in petroleum reformation for the synthesis of higher olefins from the products (alpha-olefins) from the Shell higher olefin process (SHOP) under high pressure and high temperatures.
Modern catalysts can be used for a variety of specialized organic compounds and monomers. Modern applications include the synthesis of pharmaceutical drugs,[5] macrocyclic crownophanes[6] the manufacturing of high-strength materials, the production of propylene,[7] the preparation of cancer-targeting nanoparticles,[8] and the conversion of renewable plant-based feedstocks into hair and skin care products.[9]
Some important classes of olefin metathesis include:
Hérisson and Chauvin first proposed the widely accepted mechanism of transition metal alkene metathesis.[10] The direct [2+2] cycloaddition of two alkenes is formally symmetry forbidden and thus has a high activation energy. The Chauvin mechanism involves the [2+2] cycloaddition of an alkene double bond to a transition metal alkylidene to form a metallacyclobutane intermediate. The metallacyclobutane produced can then cyclorevert to give either the original species or a new alkene and alkylidene. Interaction with the d-orbitals on the metal catalyst lowers the activation energy enough that the reaction can proceed rapidly at modest temperatures.
Like most chemical reactions, the metathesis pathway is driven by a thermodynamic imperative; that is, the final products are determined by the energetics of the possible products, with a distribution of products proportional to the exponential of their respective energy values. In olefin metathesis, however, this is especially relevant since all the possible products have similar energy values (all of them contain an olefin). Because of this the product mixture can be tuned by reaction conditions, such as gas pressure and substrate concentration. In some cases a given reaction can be run in either direction to near completion.
Cross metathesis and Ring-closing metathesis are often driven by the entropically favored evolution of ethylene or propylene, which are both gases. Because of this CM and RCM reactions often use alpha-olefins. The reverse reaction of CM of two alpha-olefins, ethenolysis, can be favored but requires high pressures of ethylene to increase ethylene concentration in solution. The reverse reaction of RCM, ring-opening metathesis, can likewise be favored by a large excess of an alpha-olefin, often styrene. Ring opening metathesis usually involves a strained alkene (often a norbornene) and the release of ring strain drives the reaction. Ring-closing metathesis, conversely, usually involves the formation of a five- or six-membered ring, which is energetically favorable; although these reactions tend to also evolve ethylene, as previously discussed. RCM has been used to close larger macrocycles, in which case the reaction may be kinetically controlled by running the reaction at extreme dilutions.[11] The same substrates that undergo RCM can undergo acyclic diene metathesis, with ADMET favored at high concentrations. The Thorpe–Ingold effect may also be exploited to improve both reaction rates and product selectivity.
Cross-metathesis is synthetically equivalent to (and has replaced) a procedure of ozonolysis of an alkene to two ketone fragments followed by the reaction of one of them with a Wittig reagent.
Known chemistry prior to the advent of olefin metathesis was introduced in the 1950s by Karl Ziegler, who as part of ongoing work in what would later become known as Ziegler–Natta catalysis studied ethylene polymerization, which on addition of certain metals resulted in 1-butene instead of a saturated long-chain hydrocarbon (see nickel effect).[12]
In 1960 a Du Pont research group polymerized norbornene to polynorbornene using lithium aluminum tetraheptyl and titanium tetrachloride[13] (a patent by this company on this topic dates back to 1955[14]),
a reaction then classified as a so-called coordination polymerization. According to the then proposed reaction mechanism a RTiX titanium intermediate first coordinates to the double bond in a pi complex. The second step then is a concerted SNi reaction breaking a CC bond and forming a new alkylidene-titanium bond; the process then repeats itself with a second monomer:
Only much later the polynorbornene was going to be produced through ring opening metathesis polymerisation. The DuPont work was led by Herbert S. Eleuterio. Giulio Natta in 1964 also observed the formation of an unsaturated polymer when polymerizing cyclopentene with tungsten and molybdenum halides.[15]
In a third development leading up to olefin metathesis, researchers at Phillips Petroleum Company in 1964[16] described olefin disproportionation with catalysts molybdenum hexacarbonyl, tungsten hexacarbonyl, and molybdenum oxide supported on alumina for example converting propylene to an equal mixture of ethylene and 2-butene for which they proposed a reaction mechanism involving a cyclobutane (they called it a quasicyclobutane) – metal complex:
This particular mechanism is symmetry forbidden based on the Woodward–Hoffmann rules first formulated two years earlier. Cyclobutanes have also never been identified in metathesis reactions another reason why it was quickly abandoned.
Then in 1967 researchers at the Goodyear Tire and Rubber Company described a novel catalyst system for the metathesis of 2-pentene based on tungsten hexachloride, ethanol the organoaluminum compound EtAlMe2 and also proposed a name for this reaction type: olefin metathesis.[17] Formerly the reaction had been called "olefin disproportionation."
In this reaction 2-pentene forms a rapid (a matter of seconds) chemical equilibrium with 2-butene and 3-hexene. No double bond migrations are observed; the reaction can be started with the butene and hexene as well and the reaction can be stopped by addition of methanol.
The Goodyear group demonstrated that the reaction of regular 2-butene with its all-deuterated isotopologue yielded C4H4D4 with deuterium evenly distributed.[18] In this way they were able to differentiate between a transalkylidenation mechanism and a transalkylation mechanism (ruled out):
In 1971 Chauvin proposed a four-membered metallacycle intermediate to explain the statistical distribution of products found in certain metathesis reactions.[19] This mechanism is today considered the actual mechanism taking place in olefin metathesis.
The active catalyst, a metallocarbene,[20] was discovered by in 1964 by E. O. Fischer. Chauvin's experimental evidence was based on the reaction of cyclopentene and 2-pentene with the homogeneous catalyst tungsten(VI) oxytetrachloride and tetrabutyltin:
The three principal products C9, C10 and C11 are found in a 1:2:1 regardless of conversion. The same ratio is found with the higher oligomers. Chauvin also explained how the carbene forms in the first place: by alpha-hydride elimination from a carbon metal single bond. For example propylene (C3) forms in a reaction of 2-butene (C4) with tungsten hexachloride and tetramethyltin (C1).
In the same year Pettit who synthesised cyclobutadiene a few years earlier independently came up with a competing mechanism.[21] It consisted of a tetramethylene intermediate with sp3 hybridized carbon atoms linked to a central metal atom with multiple three-center two-electron bonds.
Experimental support offered by Pettit for this mechanism was based on an observed reaction inhibition by carbon monoxide in certain metathesis reactions of 4-nonene with a tungsten metal carbonyl[22]
Robert H. Grubbs got involved in metathesis in 1972 and also proposed a metallacycle intermediate but one with four carbon atoms in the ring.[23] The group he worked in reacted 1,4-dilithiobutane with tungsten hexachloride in an attempt to directly produce a cyclomethylenemetallacycle producing an intermediate, which yielded products identical with those produced by the intermediate in the olefin metathesis reaction. This mechanism is pairwise:
In 1973 Grubbs found further evidence for this mechanism by isolating one such metallacycle not with tungsten but with platinum by reaction of the dilithiobutane with cis-bis(triphenylphosphine)dichloroplatinum(II)[24]
In 1975 Katz also arrived at a metallacyclobutane intermediate consistent with the one proposed by Chauvin[25] He reacted a mixture of cyclooctene, 2-butene and 4-octene with a molybdenum catalyst and observed that the unsymmetrical C14 hydrocarbon reaction product is present right from the start at low conversion.
In any of the pairwise mechanisms with olefin pairing as rate-determining step this compound, a secondary reaction product of C12 with C6, would form well after formation of the two primary reaction products C12 and C16.
In 1974 Casey was the first to implement carbenes into the metathesis reaction mechanism:[26]
Grubbs in 1976 provided evidence against his own updated pairwise mechanism:
with a 5-membered cycle in another round of isotope labeling studies in favor of the 4-membered cycle Chauvin mechanism:[27][28]
In this reaction the ethylene product distribution (d4,d2,d0) at low conversion was found to be consistent with the carbene mechanism. On the other hand Grubbs did not rule out the possibility of a tetramethylene intermediate.
The first practical metathesis system was introduced in 1978 by Tebbe based on the (what later became known as the) Tebbe reagent.[29] In a model reaction isotopically labeled carbon atoms in isobutene and methylenecyclohexane switched places:
The Grubbs group then isolated the proposed metallacyclobutane intermediate in 1980 also with this reagent together with 3-methyl-1-butene:[30]
They isolated a similar compound in the total synthesis of capnellene in 1986:[31]
In that same year the Grubbs group proved that metathesis polymerization of norbornene by Tebbe's reagent is a living polymerization system[32] and a year later Grubbs and Schrock co-published an article describing living polymerization with a tungsten carbene complex[33] While Schrock focussed his research on tungsten and molybdenum catalysts for olefin metathesis, Grubbs started the development of catalysts based on ruthenium, which proved to be less sensitive to oxygen and water and therefore more functional group tolerant.
In the 1960s and 1970s various groups reported the ring-opening polymerization of norbornene catalyzed by hydrated trichlorides of ruthenium and other late transition metals in polar, protic solvents.[34][35][36] This prompted Robert H. Grubbs and coworkers to search for well-defined, functional group tolerant catalysts based on ruthenium. The Grubbs group successfully polymerized the 7-oxo norbornene derivative using ruthenium trichloride, osmium trichloride as well as tungsten alkylidenes.[37] They identified a Ru(II) carbene as an effective metal center and in 1992 published the first well-defined, ruthenium-based olefin metathesis catalyst, (PPh3)2Cl2Ru=CHCH=CPh2:[38]
The corresponding tricyclohexylphosphine complex (PCy3)2Cl2Ru=CHCH=CPh2 was also shown to be active.[39] This work culminated in the now commercially available 1st generation Grubbs catalyst.[40][41]
Schrock entered the olefin metathesis field in 1979 as an extension of work on tantalum alkylidenes.[42] The initial result was disappointing as reaction of CpTa(=CH-t-Bu)Cl2 with ethylene yielded only a metallacyclopentane, not metathesis products:[43]
But by tweaking this structure to a PR3Ta(CHt-bu)(Ot-bu)2Cl (replacing chloride by t-butoxide and a cyclopentadienyl by an organophosphine, metathesis was established with cis-2-pentene.[44] In another development, certain tungsten oxo complexes of the type W(O)(CHt-Bu)(Cl)2(PEt)3 were also found to be effective.[45]
Schrock alkylidenes for olefin metathesis of the type Mo(NAr)(CHC(CH3)2R){OC(CH3)(CF3)2}2 were commercialized starting in 1990.[46][47]
The first asymmetric catalyst followed in 1993[48]
With a Schrock catalyst modified with a BINOL ligand in a norbornadiene ROMP leading to highly stereoregular cis, isotactic polymer.
|
関連記事 | 「metathesis」「olefin」 |
.