関: alkene

WordNet

any unsaturated aliphatic hydrocarbon (同)olefine, olefin

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2015/06/03 09:59:27」(JST)

wiki en

A 3D model of ethylene, the simplest alkene.

In organic chemistry, an alkene is an unsaturated hydrocarbon that contains at least one carbon–carbon double bond.^[1] Alkene, olefin, and olefine are used often interchangebly (see nomenclature section below). Acyclic alkenes, with only one double bond and no other functional groups, known as mono-enes, form a homologous series of hydrocarbons with the general formula C_nH_2n.^[2] Alkenes have two hydrogen atoms less than the corresponding alkane (with the same number of carbon atoms). The simplest alkene, ethylene (C₂H₄), which has the International Union of Pure and Applied Chemistry (IUPAC) name ethene is the organic compound produced on the largest scale industrially.^[3] Aromatic compounds are often drawn as cyclic alkenes, but their structure and properties are different and they are not considered to be alkenes.^[2]

1 Structure
- 1.1 Bonding
- 1.2 Shape
2 Physical properties
3 Reactions
- 3.1 Addition reactions
  - 3.1.1 Hydrogenation
  - 3.1.2 Hydration
  - 3.1.3 Halogenation
  - 3.1.4 Hydrohalogenation
  - 3.1.5 Halohydrin formation
  - 3.1.6 Oxidation
  - 3.1.7 Photooxygenation
- 3.2 Polymerization
- 3.3 Metal complexation
- 3.4 Reaction overview
4 Synthesis
- 4.1 Industrial methods
- 4.2 Elimination reactions
- 4.3 Synthesis from carbonyl compounds
- 4.4 Synthesis from alkenes: olefin metathesis and hydrovinylation
- 4.5 From alkynes
- 4.6 Rearrangements and related reactions
5 Nomenclature
- 5.1 IUPAC names
- 5.2 Cis-trans notation
- 5.3 E,Z notation
- 5.4 Groups containing C=C double bonds
6 See also
7 Nomenclature links
8 References

Structure

Bonding

Ethylene (ethene), showing the pi bond in green.

Like a single covalent bond, double bonds can be described in terms of overlapping atomic orbitals, except that, unlike a single bond (which consists of a single sigma bond), a carbon–carbon double bond consists of one sigma bond and one pi bond. This double bond is stronger than a single covalent bond (611 kJ/mol for C=C vs. 347 kJ/mol for C–C)^[1] and also shorter with an average bond length of 1.33 Angstroms (133 pm).

Each carbon of the double bond uses its three sp² hybrid orbitals to form sigma bonds to three atoms. The unhybridized 2p atomic orbitals, which lie perpendicular to the plane created by the axes of the three sp² hybrid orbitals, combine to form the pi bond. This bond lies outside the main C–C axis, with half of the bond on one side and half on the other.

Rotation about the carbon–carbon double bond is restricted because it involves an energetic cost to break the alignment of the p orbitals on the two carbon atoms. As a consequence, substituted alkenes may exist as one of two isomers, called cis or trans isomers. More complex alkenes may be named using the E-Z notation, used to describe molecules having three or four different substituents (side groups). For example, of the isomers of butene, the two methyl groups of (Z)-but-2-ene (a.k.a. cis-2-butene) face the same side of the double bond, and in (E)-but-2-ene (a.k.a. trans-2-butene) the methyl groups face the opposite side. These two isomers of butene are slightly different in their chemical and physical properties.

A 90° twist of the C=C bond, as determined by the positions of the groups attached to the carbons, requires less energy than the strength of a pi bond, which means that that there is still some bonding present. This contradicts the simple and common textbook explanation of π bond twisting, which usually says that this sort of molecular rotation would cause the p orbitals on the two carbons to be twisted 90° to each other and thus be unable to have a bonding effect. Instead, the misalignment of the p orbitals is less than expected because pyramidalization takes place (See: pyramidal alkene). trans-Cyclooctene is a stable strained alkene and the orbital misalignment is only 19° with a dihedral angle of 137° (normal 120°) and a degree of pyramidalization of 18°.^[4] The trans isomer of cycloheptene is only stable at low temperatures.

Shape

As predicted by the VSEPR model of electron pair repulsion, the molecular geometry of alkenes includes bond angles about each carbon in a double bond of about 120°. The angle may vary because of steric strain introduced by nonbonded interactions created by functional groups attached to the carbons of the double bond. For example, the C-C-C bond angle in propylene is 123.9°.

For bridged alkenes, Bredt's rule states that a double bond cannot be placed at the bridgehead of a bridged ring system, unless the rings are large enough (8 or more atoms).

Physical properties

The physical properties of alkenes and alkanes are similar. They are colourless, nonpolar, combustable, and almost odorless. The physical state depends on molecular mass: like the corresponding saturated hydrocarbons, the simplest alkenes, ethene, propene, and butene are gases at room temperature. Linear alkenes of approximately five to sixteen carbons are liquids, and higher alkenes are waxy solids.

Reactions

Alkenes are relatively stable compounds, but are more reactive than alkanes, either because of the reactivity of the carbon–carbon pi-bond or the presence of allylic CH centers. Most reactions of alkenes involve additions to this pi bond, forming new single bonds. Alkenes serve as a feedstock for the petrochemical industry because they can participate in a wide variety of reactions, prominently, polymerization and alkylation.

Addition reactions

Alkenes react in many addition reactions, which occur by opening up the double-bond. Most addition reactions to alkenes follow the mechanism of electrophilic addition. Examples of addition reactions are hydrohalogenation, halogenation, halohydrin formation, oxymercuration, hydroboration, dichlorocarbene addition, Simmons–Smith reaction, catalytic hydrogenation, epoxidation, radical polymerization and hydroxylation.

Hydrogenation

Hydrogenation of alkenes produces the corresponding alkanes. The reaction is carried out under pressure at a temperature of 200 °C in the presence of a metallic catalyst. Common industrial catalysts are based on platinum, nickel or palladium. For laboratory syntheses, Raney nickel (an alloy of nickel and aluminium) is often employed. The simplest example of this reaction is the catalytic hydrogenation of ethylene to yield ethane:

CH₂=CH₂ + H₂ → CH₃-CH₃

Hydration

Hydration, the addition of water across the double bond of alkenes, yields alcohols. The reaction is catalyzed by strong acids such as sulfuric acid. This reaction is carried out on an industrial scale to produce ethanol.

CH₂=CH₂ + H₂O → CH₃-CH₂OH

Alkenes can also be converted into alcohols via the oxymercuration–demercuration reaction or hydroboration–oxidation reaction.

Halogenation

In electrophilic halogenation the addition of elemental bromine or chlorine to alkenes yields vicinal dibromo- and dichloroalkanes (1,2-dihalides or ethylene dihalides), respectively. The decoloration of a solution of bromine in water is an analytical test for the presence of alkenes:

CH₂=CH₂ + Br₂ → BrCH₂-CH₂Br

Related reactons are also used as quantitative measures of unsaturation, expressed as the bromine number and iodine number of a compound or mixture.

Hydrohalogenation

Hydrohalogenation is the addition of hydrogen halides such as HCl or HI to alkenes to yield the corresponding haloalkanes:

CH₃-CH=CH₂ + HI → CH₃-CHI-CH₂-H

If the two carbon atoms at the double bond are linked to a different number of hydrogen atoms, the halogen is found preferentially at the carbon with fewer hydrogen substituents. This patterns is known as Markovnikov's rule. The use of radical initiators or other compounds can lead to the opposite product result. Hydrobromic acid in particular is prone to forming radicals in the presence of various impurities or even atmospheric oxygen, leading to the reversal of the Markovnikov result:^[5]

CH₃-CH=CH₂ + HBr → CH₃-CHH-CH₂-Br

Halohydrin formation

Alkenes react with water and halogens to form halohydrins by an addition reaction. Markovnikov regiochemistry and anti stereochemistry occur.

CH₂=CH₂ + X₂ + H₂O → XCH₂-CH₂OH + HX

Oxidation

Alkenes are oxidized with a large number of oxidizing agents. In the presence of oxygen, alkenes burn with a bright flame to produce carbon dioxide and water. Catalytic oxidation with oxygen or the reaction with percarboxylic acids yields epoxides. Reaction with ozone in ozonolysis leads to the breaking of the double bond, yielding two aldehydes or ketones. Reaction with concentrated, hot KMnO₄ (or other oxidizing salts) in an acidic solution will yield ketones or carboxylic acids.

R₁-CH=CH-R₂ + O₃ → R₁-CHO + R₂-CHO + H₂O

This reaction can be used to determine the position of a double bond in an unknown alkene.

The oxidation can be stopped at the vicinal diol rather than full cleavage of the alkene by using milder (dilute,lower temperature) KMnO₄ or with osmium tetroxide or other oxidants.

Photooxygenation

In the presence of an appropriate photosensitiser, such as methylene blue and light, alkenes can undergo reactions with reactive oxygen species generated by the photosensitiser, such as hydroxyl radicals, singlet oxygen or superoxide ion. These reactive photochemical intermediates are generated in what are known as Type I, Type II, and Type III processes, respectively.^{[citation needed]} These various alternative processes and reactions can be controlled by choice of specific reaction conditions, leading to a wide range of different products. A common example is the [4+2] cycloaddition of singlet oxygen with a diene such as cyclopentadiene to yield an endoperoxide:

Another example is the Schenck ene reaction, in which singlet oxygen reacts with an allylic structure to give a transposed allyl peroxide:

Polymerization

Polymerization of alkenes is a reaction that yields polymers of high industrial value at great economy, such as the plastics polyethylene and polypropylene. Polymers from alkene monomers are referred to in a general way as polyolefins or in rare instances as polyalkenes. A polymer from alpha-olefins is called a polyalphaolefin (PAO). Polymerization can proceed via either a free-radical or an ionic mechanism, converting the double to a single bond and forming single bonds to join the other monomers. Polymerization of conjugated dienes such as buta-1,3-diene or isoprene (2-methylbuta-1,3-diene) results in largely 1,4-addition with possibly some 1,2-addition of the diene monomer to a growing polymer chain.

Metal complexation

Structure of bis(cyclooctadiene)nickel(0), a metal–alkene complex

Alkenes are ligands in transition metal alkene complexes. The two carbon centres bond to the metal using the C-C pi- and pi* orbitals. Mono- and diolefins are often used as ligands in stable complexes. Cyclooctadiene and norbornadiene are popular chelating agents, and even ethylene itself is sometimes used as a ligand, for example, in Zeise's salt. In addition, metal–alkene complexes are intermediates in many metal-catalyzed reactions including hydrogenation, hydroformylation, and polymerization.

Reaction overview

Reaction name	Product	Comment
Hydrogenation	alkanes	addition of hydrogen
Hydroalkenylation	alkenes	hydrometalation / insertion / beta elimination by metal catalyst
Halogen addition reaction	1,2-dihalide	electrophilic addition of halogens
Hydrohalogenation (Markovnikov)	haloalkanes	addition of hydrohalic acids
Antimarkovnikov hydrohalogenation	haloalkanes	free radicals mediated addition of hydrohalic acids
Hydroamination	amines	addition of N-H bond across C-C double bond
Hydroformylation	aldehydes	industrial process, addition of CO and H₂
Sharpless bishydroxylation	diols	oxidation, reagent: osmium tetroxide, chiral ligand
Woodward cis-hydroxylation	diols	oxidation, reagents: iodine, silver acetate
Ozonolysis	aldehydes or ketones	reagent: ozone
Olefin metathesis	alkenes	two alkenes rearrange to form two new alkenes
Diels-Alder reaction	cyclohexenes	cycloaddition with a diene
Pauson-Khand reaction	cyclopentenones	cycloaddition with an alkyne and CO
Hydroboration–oxidation	alcohols	reagents: borane, then a peroxide
Oxymercuration-reduction	alcohols	electrophilic addition of mercuric acetate, then reduction
Prins reaction	1,3-diols	electrophilic addition with aldehyde or ketone
Paterno–Büchi reaction	oxetanes	photochemical reaction with aldehyde or ketone
Epoxidation	epoxide	electrophilic addition of a peroxide
Cyclopropanation	cyclopropanes	addition of carbenes or carbenoids
Hydroacylation	ketones	oxidative addition / reductive elimination by metal catalyst

Synthesis

Industrial methods

Alkenes are produced by hydrocarbon cracking. Raw materials are mostly natural gas condensate components (principally ethane and propane) in the US and Mideast and naphtha in Europe and Asia. Alkanes are broken apart at high temperatures, often in the presence of a zeolite catalyst, to produce a mixture of primarily aliphatic alkenes and lower molecular weight alkanes. The mixture is feedstock and temperature dependent, and separated by fractional distillation. This is mainly used for the manufacture of small alkenes (up to six carbons).^[1]

Related to this is catalytic dehydrogenation, where an alkane loses hydrogen at high temperatures to produce a corresponding alkene.^[1] This is the reverse of the catalytic hydrogenation of alkenes.

This process is also known as reforming. Both processes are endothermic and are driven towards the alkene at high temperatures by entropy.

Catalytic synthesis of higher α-alkenes (of the type RCH=CH₂) can also be achieved by a reaction of ethylene with the organometallic compound triethylaluminium in the presence of nickel, cobalt, or platinum.

Elimination reactions

One of the principal methods for alkene synthesis in the laboratory is the elimination of alkyl halides, alcohols, and similar compounds. Most common is the β-elimination via the E2 or E1 mechanism,^[6] but α-eliminations are also known.

The E2 mechanism provides a more reliable β-elimination method than E1 for most alkene syntheses. Most E2 eliminations start with an alkyl halide or alkyl sulfonate ester (such as a tosylate or triflate). When an alkyl halide is used, the reaction is called a dehydrohalogenation. For unsymmetrical products, the more substituted alkenes (those with fewer hydrogens attached to the C=C) tend to predominate (see Zaitsev's rule). Two common methods of elimination reactions are dehydrohalogenation of alkyl halides and dehydration of alcohols. A typical example is shown below; note that if possible, the H is anti to the leaving group, even though this leads to the less stable Z-isomer.^[7]

Alkenes can be synthesized from alcohols via dehydration, in which case water is lost via the E1 mechanism. For example, the dehydration of ethanol produces ethene:

CH₃CH₂OH + H₂SO₄ → H₂C=CH₂ + H₃O⁺ + HSO₄⁻

An alcohol may also be converted to a better leaving group (e.g., xanthate), so as to allow a milder syn-elimination such as the Chugaev elimination and the Grieco elimination. Related reactions include eliminations by β-haloethers (the Boord olefin synthesis) and esters (ester pyrolysis).

Alkenes can be prepared indirectly from alkyl amines. The amine or ammonia is not a suitable leaving group, so the amine is first either alkylated (as in the Hofmann elimination) or oxidized to an amine oxide (the Cope reaction) to render a smooth elimination possible. The Cope reaction is a syn-elimination that occurs at or below 150 °C, for example:^[8]

The Hofmann elimination is unusual in that the less substituted (non-Saytseff) alkene is usually the major product.

Alkenes are generated from α-halo sulfones in the Ramberg-Bäcklund reaction, via a three-membered ring sulfone intermediate.

Synthesis from carbonyl compounds

Another important method for alkene synthesis involves construction of a new carbon–carbon double bond by coupling of a carbonyl compound (such as an aldehyde or ketone) to a carbanion equivalent. Such reactions are sometimes called olefinations. The most well-known of these methods is the Wittig reaction, but other related methods are known.

The Wittig reaction involves reaction of an aldehyde or ketone with a Wittig reagent (or phosphorane) of the type Ph₃P=CHR to produce an alkene and Ph₃P=O. The Wittig reagent is itself prepared easily from triphenylphosphine and an alkyl halide. The reaction is quite general and many functional groups are tolerated, even esters, as in this example:^[9]

Related to the Wittig reaction is the Peterson olefination. This uses a less accessible silicon-based reagent in place of the phosphorane, but it allows for the selection of E or Z products. If an E-product is desired, another alternative is the Julia olefination, which uses the carbanion generated from a phenyl sulfone. The Takai olefination based on an organochromium intermediate also delivers E-products. A titanium compound, Tebbe's reagent, is useful for the synthesis of methylene compounds; in this case, even esters and amides react.

A pair of carbonyl compounds can also be reductively coupled together (with reduction) to generate an alkene. Symmetrical alkenes can be prepared from a single aldehyde or ketone coupling with itself, using Ti metal reduction (the McMurry reaction). If two different ketones are to be coupled, a more complex, indirect method such as the Barton–Kellogg reaction may be used.

A single ketone can also be converted to the corresponding alkene via its tosylhydrazone, using sodium methoxide (the Bamford–Stevens reaction) or an alkyllithium (the Shapiro reaction).

Synthesis from alkenes: olefin metathesis and hydrovinylation

Alkenes can be prepared by exchange with other alkenes, in a reaction known as olefin metathesis. Frequently, loss of ethene gas is used to drive the reaction towards a desired product. In many cases, a mixture of geometric isomers is obtained, but the reaction tolerates many functional groups. The method is particularly effective for the preparation of cyclic alkenes, as in this synthesis of muscone:

Transition metal catalyzed hydrovinylation is another important alkene synthesis process starting from alkene itself.^[10] In general, it involves the addition of a hydrogen and a vinyl group (or an alkenyl group) across a double bond. The hydrovinylation reaction was first reported by Alderson, Jenner, and Lindsey by using rhodium and ruthenium salts, other metal catalysts commonly employed nowadays included iron, cobalt, nickel, and palladium. The addition can be done highly regio- and stereo-selectively, the choices of metal centers, ligands, substrates and counterions often play very important role.^[11]^[12]^[13] Recent studies showed that the use of N-heterocyclic carbene with Ni can be useful for the selective preparations of functionalized geminal olefins or 1,1-disubstituted alkenes.^[14]^[15]

From alkynes

Reduction of alkynes is a useful method for the stereoselective synthesis of disubstituted alkenes. If the cis-alkene is desired, hydrogenation in the presence of Lindlar's catalyst (a heterogeneous catalyst that consists of palladium deposited on calcium carbonate and treated with various forms of lead) is commonly used, though hydroboration followed by hydrolysis provides an alternative approach. Reduction of the alkyne by sodium metal in liquid ammonia gives the trans-alkene.^[16]

For the preparation multisubstituted alkenes, carbometalation of alkynes can give rise to a large variety of alkene derivatives.

Rearrangements and related reactions

Alkenes can be synthesized from other alkenes via rearrangement reactions. Besides olefin metathesis (described above), a large number of pericyclic reactions can be used such as the ene reaction and the Cope rearrangement.

In the Diels-Alder reaction, a cyclohexene derivative is prepared from a diene and a reactive or electron-deficient alkene.

Nomenclature

Although the nomenclature is not followed widely, according to IUPAC, alkenes are acyclic hydrocarbons with one double bond between carbon centers. Olefins comprise a larger collection of cyclic and acyclic alkenes as well as di- and polyenes.^[17]

IUPAC names

To form the root of the IUPAC names for alkenes, simply change the -an- infix of the parent to -en-. For example, CH₃-CH₃ is the alkane ethANe. The name of CH₂=CH₂ is therefore ethENe.

In higher alkenes, where isomers exist that differ in location of the double bond, the following numbering system is used:

Number the longest carbon chain that contains the double bond in the direction that gives the carbon atoms of the double bond the lowest possible numbers.
Indicate the location of the double bond by the location of its first carbon.
Name branched or substituted alkenes in a manner similar to alkanes.
Number the carbon atoms, locate and name substituent groups, locate the double bond, and name the main chain.

Naming substituted hex-1-enes

Cis-trans notation

In the specific case of disubstituted alkenes where the two carbons have one substituent each, Cis-trans notation may be used. If both substituents are on the same side of the bond, it is defined as (cis-). If the substituents are on either side of the bond, it is defined as (trans-).

The difference between cis- and trans- isomers

E,Z notation

When an alkene has more than one substituent (especially necessary with 3 or 4 substituents), the double bond geometry is described using the labels E and Z. These labels come from the German words "entgegen," meaning "opposite," and "zusammen," meaning "together." Alkenes with the higher priority groups (as determined by CIP rules) on the same side of the double bond have these groups together and are designated Z. Alkenes with the higher priority groups on opposite sides are designated E. A mnemonic to remember this: Z notation has the higher priority groups on "ze zame zide."

The difference between E and Z isomers

Groups containing C=C double bonds

IUPAC recognizes two names for hydrocarbon groups containing carbon–carbon double bonds, the vinyl group and the allyl group. .^[2]

Nomenclature links

Rule A-3. Unsaturated Compounds and Univalent Radicals [1] IUPAC Blue Book.
Rule A-4. Bivalent and Multivalent Radicals [2] IUPAC Blue Book.
Rules A-11.3, A-11.4, A-11.5 Unsaturated monocyclic hydrocarbons and substituents [3] IUPAC Blue Book.
Rule A-23. Hydrogenated Compounds of Fused Polycyclic Hydrocarbons [4] IUPAC Blue Book.

References

^ ^a ^b ^c ^d Wade, L.G. (2006). Organic Chemistry (6th ed.). Pearson Prentice Hall. p. 279. ISBN 1-4058-5345-X.
^ ^a ^b ^c Moss, G. P.; Smith, P. A. S.; Tavernier, D. (1995). "Glossary of Class Names of Organic Compounds and Reactive Intermediates Based on Structure (IUPAC Recommendations 1995)". Pure and Applied Chemistry 67 (8–9): 1307–1375. doi:10.1351/pac199567081307.
^ "Production: Growth is the Norm". Chemical and Engineering News 84 (28): 59. July 10, 2006. doi:10.1021/cen-v084n034.p059.
^ Barrows, Susan E.; Eberlein, Thomas H. (2005). "Understanding Rotation about a C=C Double Bond". J. Chem. Educ. 82 (9): 1329. Bibcode:2005JChEd..82.1329B. doi:10.1021/ed082p1329.
^ Streiwieser, A.; Heathcock, C.H.; Kosower, E.M. (1992). "11.6.G. Alkenes: Reacttions: Free Radical Additions". Introduction to Organic Chemistry (4th ed.). New York: Macmillan. p. 288.
^ Saunders, W. H. (1964). Patai, Saul, ed. The Chemistry of Alkenes. Wiley Interscience. pp. 149–150.
^ Cram, D.J.; Greene, Frederick D.; Depuy, C. H. (1956). "Studies in Stereochemistry. XXV. Eclipsing Effects in the E2 Reaction1". Journal of the American Chemical Society 78 (4): 790–796. doi:10.1021/ja01585a024.
^ Bach, R.D.; Andrzejewski, Denis; Dusold, Laurence R. (1973). "Mechanism of the Cope elimination". J. Org. Chem. 38 (9): 1742–3. doi:10.1021/jo00949a029.
^ Snider, Barry B.; Matsuo, Y; Snider, BB (2006). "Synthesis of ent-Thallusin". Org. Lett. 8 (10): 2123–6. doi:10.1021/ol0605777. PMC 2518398. PMID 16671797.
^ Vogt, D. (2010). "Cobalt-Catalyzed Asymmetric Hydrovinylation". Angew. Chem. Int. Ed. 49 (40): 7166–8. doi:10.1002/anie.201003133. PMID 20672269.
^ Grutters, M. M. P. Muller, C. Vogt, D. (2006). "Highly Selective Cobalt-Catalyzed Hydrovinylation of Styrene". J. Am. Chem. Soc. 128 (23): 7414–5. doi:10.1021/ja058095y. PMID 16756275.
^ Hilt, G. Danz, M. Treutwein, J. (2009). "Cobalt-Catalyzed 1,4-Hydrovinylation of Styrenes and 1-Aryl-1,3-butadienes". Org. Lett. 11 (15): 3322–5. doi:10.1021/ol901064p. PMID 19583205.
^ Sharma, R. K. RajanBabu, T. V. (2010). "Asymmetric Hydrovinylation of Unactivated Linear 1,3-Dienes". J. Am. Chem. Soc. 132 (10): 3295–7. doi:10.1021/ja1004703. PMC 2836389. PMID 20163120.
^ Ho, C.-Y., He, L. (2010). "Catalytic Intermolecular Tail-to-Tail Hydroalkenylation of Styrenes with alpha-Olefins: Regioselective Migratory Insertion Controlled by a Nickel/N-Heterocyclic Carbene". Angew. Chem. Int. Ed. 49 (48): 9182–9186. doi:10.1002/anie.201001849. PMID 20853303.
^ Ho, C.-Y., He, L. (2012). "Shuffle Off the Classic Beta-Si Elimination by Ni-NHC Cooperation: Implication for C–C Forming Reactions Involving Ni-Alkyl-Beta-Silanes". Chem. Commun. 48 (10): 1481–1483. doi:10.1039/c1cc14593b. PMID 22116100.
^ Zweifel, George S.; Nantz, Michael H. (2007). Modern Organic Synthesis: An Introduction. New York: W. H. Freeman & Co. p. 366. ISBN 0-7167-7266-3.
^ http://goldbook.iupac.org/O04281.html

English Journal

Premacular hemorrhage due to isotretinoin use.

Onder HI, Turan H, Kilic AC, Kaya M, Tunc M.SourceDepartment of Ophthalmology, Duzce University, Duzce, Turkey. dribrahimonder@yahoo.com
Cutaneous and ocular toxicology.Cutan Ocul Toxicol.2013 Jun;32(2):170-2. doi: 10.3109/15569527.2012.676121. Epub 2012 Apr 17.
Isotretinoin is a vitamin A derivative used for serious acne that is refractory to other modes of treatment. The most common side effects include dryness of the skin and mucous membranes. Itching as a result of neurological, hematological and ocular side effects has also been reported. Here, we pres
PMID 22510043

Analyses of the correlation between dermal and blood carotenoids in female cattle by optical methods.

Klein J, Darvin ME, Meinke MC, Schweigert FJ, Müller KE, Lademann J.SourceFreie Universität Berlin, Faculty of Veterinary Medicine, Clinic for Ruminants and Swine, Berlin, Germany.
Journal of biomedical optics.J Biomed Opt.2013 Jun;18(6):061219.
Herd health programs for the maintenance of welfare and productivity in cattle need efficient tools for monitoring the health of individual animals. Recent reports demonstrate that the oxidative status is related to various stress conditions in dairy cows. Biomarkers, among other carotenoids, could
PMID 23264963

Regulation of human Cripto-1 expression by nuclear receptors and DNA promoter methylation in human embryonal and breast cancer cells.

Bianco C, Castro NP, Baraty C, Rollman K, Held N, Rangel MC, Karasawa H, Gonzales M, Strizzi L, Salomon DS.SourceLaboratory of Cancer Prevention, Frederick National Laboratory for Cancer Research, Frederick, MD, USA. biancoc@mail.nih.gov
Journal of cellular physiology.J Cell Physiol.2013 Jun;228(6):1174-88. doi: 10.1002/jcp.24271.
Human Cripto-1 (CR-1) plays an important role in regulating embryonic development while also regulating various stages of tumor progression. However, mechanisms that regulate CR-1 expression during embryogenesis and tumorigenesis are still not well defined. In the present study, we investigated the
PMID 23129342