feedback mechanism

• フィードバック機構

WordNet

1. the atomic process that occurs during a chemical reaction; "he determined unique mechanisms for the photochemical reactions" (同)chemical mechanism
2. the technical aspects of doing something; "a mechanism of social control"; "mechanisms of communication"; "the mechanics of prose style" (同)mechanics
3. device consisting of a piece of machinery; has moving parts that perform some function
4. (philosophy) the philosophical theory that all phenomena can be explained in terms of physical or biological causes
5. a natural object resembling a machine in structure or function; "the mechanism of the ear"; "the mechanism of infection"
6. the process in which part of the output of a system is returned to its input in order to regulate its further output
7. response to an inquiry or experiment

PrepTutorEJDIC

1. 〈C〉機械;(部分的な)機械装置 / 〈C〉(機械装置に似た)機構 / 〈C〉(物事が行われる)仕組み,方法 / 〈U〉機械論
2. フィードバック(電子工学で,ある回路の出力側のエネルギーの一部を入力側へ戻し,出力の制御,修正をすること;社会学・心理学・生物などで,結果によって原因を自動的に調整する動作) / 《話》(…についての)反応《+『about』+『名』》

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2015/05/06 05:01:50」(JST)

wiki en

[Wiki en表示]

This article is about mechanistic circular causality. For behavioural reinforcement and personal feedback, see reinforcement. For other uses, see Feedback (disambiguation).

"...'feedback' exists between two parts when each affects the other."

A feedback loop where all outputs of a process are available as causal inputs to that process

Feedback occurs when outputs of a system are "fed back" as inputs as part of a chain of cause-and-effect that forms a circuit or loop. The system can then be said to "feed back" into itself. The notion of 'cause-and-effect' has to be handled carefully when applied to feedback systems:

"Simple causal reasoning about a feedback system is difficult because the first system influences the second and second system influences the first, leading to a circular argument. This makes reasoning based upon cause and effect tricky, and it is necessary to analyze the system as a whole."

In this context, the term "feedback" has also been used as an abbreviation for:

• Feedback signal – the conveyance of information fed back from an output, or measurement, to an input, or effector, that affects the system.
• Feedback loop – the closed path made up of the system itself and the path that transmits the feedback about the system from its origin (for example, a sensor) to its destination (for example, an actuator).
• Negative feedback – the case where the fed-back information acts to control or regulate a system by opposing changes in the output or measurement.

History

Self-regulating mechanisms have existed since antiquity, and the idea of feedback had started to enter economic theory in Britain by the eighteenth century, but it wasn't at that time recognized as a universal abstraction and so didn't have a name.

The verb phrase "to feed back", in the sense of returning to an earlier position in a mechanical process, was in use in the US by the 1860s, and in 1909, Nobel laureate Karl Ferdinand Braun used the term "feed-back" as a noun to refer to (undesired) coupling between components of an electronic circuit.

By the end of 1912, researchers using early electronic amplifiers (audions) had discovered that deliberately coupling part of the output signal back to the input circuit would boost the amplification (through regeneration), but would also cause the audion to howl or sing. This action of feeding back of the signal from output to input gave rise to the use of the term "feedback" as a distinct word by 1920.

There has been over the years some dispute as to the best definition of feedback. According to Ashby (1956), mathematicians and theorists interested in the principles of feedback mechanisms prefer the definition of circularity of action, which keeps the theory simple and consistent. For those with more practical aims, feedback should be a deliberate effect via some more tangible connection.

"[Practical experimenters] object to the mathematician's definition, pointing out that this would force them to say that feedback was present in the ordinary pendulum ... between its position and its momentum—a 'feedback' that, from the practical point of view, is somewhat mystical. To this the mathematician retorts that if feedback is to be considered present only when there is an actual wire or nerve to represent it, then the theory becomes chaotic and riddled with irrelevancies."

Focusing on uses in management theory, Ramaprasad (1983) defines feedback generally as "...information about the gap between the actual level and the reference level of a system parameter" that is used to "alter the gap in some way." He emphasizes that the information by itself is not feedback unless translated into action.

Types

Positive and negative feedback

Main articles: negative feedback and positive feedback

Maintaining a desired system performance despite disturbance using negative feedback to reduce system error.

Two types of feedback are termed positive feedback and negative feedback.

As an example of negative feedback, the diagram might represent a cruise control in a car, for example, that matches a target speed such as the speed limit. The controlled system is the car; its input includes the combined torque from the engine and from the changing slope of the road (the disturbance). The car's speed (status) is measured by a speedometer. The error signal is the departure of the speed as measured by the speedometer from the target speed (set point). This measured error is interpreted by the controller to adjust the accelerator, commanding the fuel flow to the engine (the effector). The resulting change in engine torque, the feedback, combines with the torque exerted by the changing road grade to reduce the error in speed, minimizing the road disturbance.

The terms "positive/negative" were first applied to feedback prior to WWII. The idea of positive feedback was already current in the 1920s with the introduction of the regenerative circuit. Friis and Jensen (1924) described regeneration in a set of electronic amplifiers as a case where the "feed-back" action is positive in contrast to negative feed-back action, which they mention only in passing. Harold Stephen Black's classic 1934 paper first details the use of negative feedback in electronic amplifiers. According to Black:

"Positive feed-back increases the gain of the amplifier, negative feed-back reduces it."

According to Mindell (2002) confusion in the terms arose shortly after this:

"...Friis and Jensen had made the same distinction Black used between 'positive feed-back' and 'negative feed-back', based not on the sign of the feedback itself but rather on its effect on the amplifier’s gain. In contrast, Nyquist and Bode, when they built on Black’s work, referred to negative feedback as that with the sign reversed. Black had trouble convincing others of the utility of his invention in part because confusion existed over basic matters of definition."

Even prior to the terms being applied, James Clerk Maxwell had described several kinds of "component motions" associated with the centrifugal governors used in steam engines, distinguishing between those that lead to a continual increase in a disturbance or the amplitude of an oscillation, and those that lead to a decrease of the same.

Terminology

The terms positive and negative feedback are defined in different ways within different disciplines.

1. the altering of the gap between reference and actual values of a parameter, based on whether the gap is widening (positive) or narrowing (negative).
2. the valence of the action or effect that alters the gap, based on whether it has a happy (positive) or unhappy (negative) emotional connotation to the recipient or observer.

The two definitions may cause confusion, such as when an incentive (reward) is used to boost poor performance (narrow a gap). Referring to definition 1, some authors use alternative terms, replacing 'positive/negative' with self-reinforcing/self-correcting, reinforcing/balancing, discrepancy-enhancing/discrepancy-reducing or regenerative/degenerative respectively. And for definition 2, some authors advocate describing the action or effect as positive/negative reinforcement or punishment rather than feedback. Yet even within a single discipline an example of feedback can be called either positive or negative, depending on how values are measured or referenced.

This confusion may arise because feedback can be used for either informational or motivational purposes, and often has both a qualitative and a quantitative component. As Connellan and Zemke (1993) put it:

"Quantitative feedback tells us how much and how many. Qualitative feedback tells us how good, bad or indifferent."

Limitations of negative and positive feedback

While simple systems can sometimes be described as one or the other type, many systems with feedback loops cannot be so easily designated as simply positive or negative, and this is especially true when multiple loops are present.

"When there are only two parts joined so that each affects the other, the properties of the feedback give important and useful information about the properties of the whole. But when the parts rise to even as few as four, if every one affects the other three, then twenty circuits can be traced through them; and knowing the properties of all the twenty circuits does not give complete information about the system."

Other types of feedback

In general, feedback systems can have many signals fed back and the feedback loop frequently contain mixtures of positive and negative feedback where positive and negative feedback can dominate at different frequencies or different points in the state space of a system.

The term bipolar feedback has been coined to refer to biological systems where positive and negative feedback systems can interact, the output of one affecting the input of another, and vice versa.

Some systems with feedback can have very complex behaviors such as chaotic behaviors in non linear systems, while others have much more predictable behaviors, such as are used to make and design digital systems.

Feedback is used extensively in digital systems. For example binary counters and similar devices employ feedback where the current state and inputs are used to calculate a new state which is then fed back and clocked back into the device to update it.

Applications

Biology

See also: Homeostasis and Allostasis

In biological systems such as organisms, ecosystems, or the biosphere, most parameters must stay under control within a narrow range around a certain optimal level under certain environmental conditions. The deviation of the optimal value of the controlled parameter can result from the changes in internal and external environments. A change of some of the environmental conditions may also require change of that range to change for the system to function. The value of the parameter to maintain is recorded by a reception system and conveyed to a regulation module via an information channel. An example of this is Insulin oscillations.

Biological systems contain many types of regulatory circuits, both positive and negative. As in other contexts, positive and negative do not imply that the feedback causes good or bad effects. A negative feedback loop is one that tends to slow down a process, whereas the positive feedback loop tends to accelerate it. The mirror neurons are part of a social feedback system, when an observed action is "mirrored" by the brain—like a self-performed action.

Feedback is also central to the operations of genes and gene regulatory networks. Repressor (see Lac repressor) and activator proteins are used to create genetic operons, which were identified by Francois Jacob and Jacques Monod in 1961 as feedback loops. These feedback loops may be positive (as in the case of the coupling between a sugar molecule and the proteins that import sugar into a bacterial cell), or negative (as is often the case in metabolic consumption).

On a larger scale, feedback can have a stabilizing effect on animal populations even when profoundly affected by external changes, although time lags in feedback response can give rise to predator-prey cycles.

In zymology, feedback serves as regulation of activity of an enzyme by its direct product(s) or downstream metabolite(s) in the metabolic pathway (see Allosteric regulation).

The hypothalamic–pituitary–adrenal axis is largely controlled by positive and negative feedback, much of which is still unknown.

In psychology, the body receives a stimulus from the environment or internally that causes the release of hormones. Release of hormones then may cause more of those hormones to be released, causing a positive feedback loop. This cycle is also found in certain behaviour. For example, "shame loops" occur in people who blush easily. When they realize that they are blushing, they become even more embarrassed, which leads to further blushing, and so on.

Climate science

Main article: Climate change feedback

The climate system is characterized by strong positive and negative feedback loops between processes that affect the state of the atmosphere, ocean, and land. A simple example is the ice-albedo positive feedback loop whereby melting snow exposes more dark ground (of lower albedo), which in turn absorbs heat and causes more snow to melt.

Control theory

Main article: Control theory

Feedback is extensively used in control theory, using a variety of methods including state space (controls), full state feedback (also known as pole placement), and so forth. Note that in the context of control theory, "feedback" is traditionally assumed to specify "negative feedback".

Further information: PID controller

The most common general-purpose controller using a control-loop feedback mechanism is a proportional-integral-derivative (PID) controller. Heuristically, the terms of a PID controller can be interpreted as corresponding to time: the proportional term depends on the present error, the integral term on the accumulation of past errors, and the derivative term is a prediction of future error, based on current rate of change.

Mechanical engineering

In ancient times, the float valve was used to regulate the flow of water in Greek and Roman water clocks; similar float valves are used to regulate fuel in a carburettor and also used to regulate tank water level in the flush toilet.

The Dutch inventor Cornelius Drebbel (1572-1633) built thermostats (c1620) to control the temperature of chicken incubators and chemical furnaces. In 1745, the windmill was improved by blacksmith Edmund Lee, who added a fantail to keep the face of the windmill pointing into the wind. In 1787, Thomas Mead regulated the rotation speed of a windmill by using a centrifugal pendulum to adjust the distance between the bedstone and the runner stone (i.e., to adjust the load).

The use of the centrifugal governor by James Watt in 1788 to regulate the speed of his steam engine was one factor leading to the Industrial Revolution. Steam engines also use float valves and pressure release valves as mechanical regulation devices. A mathematical analysis of Watt's governor was done by James Clerk Maxwell in 1868.

The Great Eastern was one of the largest steamships of its time and employed a steam powered rudder with feedback mechanism designed in 1866 by John McFarlane Gray. Joseph Farcot coined the word servo in 1873 to describe steam-powered steering systems. Hydraulic servos were later used to position guns. Elmer Ambrose Sperry of the Sperry Corporation designed the first autopilot in 1912. Nicolas Minorsky published a theoretical analysis of automatic ship steering in 1922 and described the PID controller.

Internal combustion engines of the late 20th century employed mechanical feedback mechanisms such as the vacuum timing advance but mechanical feedback was replaced by electronic engine management systems once small, robust and powerful single-chip microcontrollers became affordable.

Electronic engineering

The simplest form of a feedback amplifier can be represented by the ideal block diagram made up of unilateral elements.

The use of feedback is widespread in the design of electronic amplifiers, oscillators, and stateful logic circuit elements such as flip flops and counters. Electronic feedback systems are also very commonly used to control mechanical, thermal and other physical processes.

If the signal is inverted on its way round the control loop, the system is said to have negative feedback; otherwise, the feedback is said to be positive. Negative feedback is often deliberately introduced to increase the stability and accuracy of a system by correcting or reducing the influence of unwanted changes. This scheme can fail if the input changes faster than the system can respond to it. When this happens, the lag in arrival of the correcting signal can result in over-correction, causing the output to oscillate or "hunt". While often an unwanted consequence of system behaviour, this effect is used deliberately in electronic oscillators.

Harry Nyquist contributed the Nyquist plot for assessing the stability of feedback systems. An easier assessment, but less general, is based upon gain margin and phase margin using Bode plots (contributed by Hendrik Bode). Design to ensure stability often involves frequency compensation, one method of compensation being pole splitting.

Electronic feedback loops are used to control the output of electronic devices, such as amplifiers. A feedback loop is created when all or some portion of the output is fed back to the input. A device is said to be operating open loop if no output feedback is being employed and closed loop if feedback is being used.

When two or more amplifiers are cross-coupled using positive feedback, complex behaviors can be created. These multivibrators are widely used and include:

• astable circuits, which act as oscillators
• monostable circuits, which can be pushed into a state, and will return to the stable state after some time
• bistable circuits, which have two stable states that the circuit can be switched between

Negative feedback loops

Negative feedback occurs when the fed-back output signal has a relative phase of 180° with respect to the input signal (upside down). This situation is sometimes referred to as being out of phase, but that term also is used to indicate other phase separations, as in "90° out of phase". Negative feedback can be used to correct output errors or to desensitize a system to unwanted fluctuations. In feedback amplifiers, this correction is generally for waveform distortion reduction or to establish a specified gain level. A general expression for the gain of a negative feedback amplifier is the asymptotic gain model.

Positive feedback loops

When the fed-back signal is in phase with the input signal. Under certain gain conditions, positive feedback reinforces the input signal to the point where the output of the device oscillates between its maximum and minimum possible states. Positive feedback may also introduce hysteresis into a circuit. This can cause the circuit to ignore small signals and respond only to large ones. It is sometimes used to eliminate noise from a digital signal. Under some circumstances, positive feedback may cause a device to latch, i.e., to reach a condition in which the output is locked to its maximum or minimum state. This fact is very widely used in digital electronics to make bistable circuits for volatile storage of information.

The loud squeals that sometimes occurs in audio systems, PA systems, and rock music are known as audio feedback. If a microphone is in front of a loudspeaker that it is connected to, sound that the microphone picks up comes out of the speaker, and is picked up by the microphone and re-amplified. If the loop gain is sufficient, howling or squealing at the maximum power of the amplifier is possible.

Oscillator

A popular op-amp relaxation oscillator.

An electronic oscillator is an electronic circuit that produces a periodic, oscillating electronic signal, often a sine wave or a square wave. Oscillators convert direct current (DC) from a power supply to an alternating current signal. They are widely used in many electronic devices. Common examples of signals generated by oscillators include signals broadcast by radio and television transmitters, clock signals that regulate computers and quartz clocks, and the sounds produced by electronic beepers and video games.

Oscillators are often characterized by the frequency of their output signal:

• An audio oscillator produces frequencies in the audio range, about 16 Hz to 20 kHz.
• An RF oscillator produces signals in the radio frequency (RF) range of about 100 kHz to 100 GHz.
• A low-frequency oscillator (LFO) is an electronic oscillator that generates a frequency below ≈20 Hz. This term is typically used in the field of audio synthesizers, to distinguish it from an audio frequency oscillator.

Oscillators designed to produce a high-power AC output from a DC supply are usually called inverters.

There are two main types of electronic oscillator: the linear or harmonic oscillator and the nonlinear or relaxation oscillator.

Flip-flop

An SR latch, constructed from a pair of cross-coupled NOR gates.

A 4-bit ring counter using D-type flip flops

A Flip-flop or latch is a circuit that has two stable states and can be used to store state information. Flip-flops are very typically constructed using feedback that crosses over between two arms of the circuit, to give a circuit that is stateful. The circuit can be made to change state by signals applied to one or more control inputs and will have one or two outputs. It is the basic storage element in sequential logic. Flip-flops and latches are fundamental building blocks of digital electronics systems used in computers, communications, and many other types of systems.

Flip-flops and latches are used as data storage elements. Such data storage can be used for storage of state, and such a circuit is described as sequential logic. When used in a finite-state machine, the output and next state depend not only on its current input, but also on its current state (and hence, previous inputs). It can also be used for counting of pulses, and for synchronizing variably-timed input signals to some reference timing signal.

Flip-flops can be either simple (transparent or opaque) or clocked (synchronous or edge-triggered). Although the term flip-flop has historically referred generically to both simple and clocked circuits, in modern usage it is common to reserve the term flip-flop exclusively for discussing clocked circuits; the simple ones are commonly called latches

Using this terminology, a latch is level-sensitive, whereas a flip-flop is edge-sensitive. That is, when a latch is enabled it becomes transparent, while a flip flop's output only changes on a single type (positive going or negative going) of clock edge.

Software

Feedback loops provide generic mechanisms for controlling the running, maintenance, and evolution of software and computing systems. Feedback-loops are important models in the engineering of adaptive software, as they define the behaviour of the interactions among the control elements over the adaptation process, to guarantee system properties at run-time. Feedback loops and foundations of control theory have been successfully applied to computing systems. In particular, they have been applied to the development of products such as IBM's Universal Database server and IBM Tivoli. From a software perspective, the autonomic (MAPE, monitor analyze plan execute) loop proposed by researchers of IBM is another valuable contribution to the application of feedback loops to the control of dynamic properties and the design and evolution of autonomic software systems.

Video feedback

Video feedback is the video equivalent of acoustic feedback. It involves a loop between a video camera input and a video output, e.g., a television screen or monitor. Aiming the camera at the display produces a complex video image based on the feedback.

Social sciences

Economics and finance

The stock market is an example of a system prone to oscillatory "hunting", governed by positive and negative feedback resulting from cognitive and emotional factors among market participants. For example,

• When stocks are rising (a bull market), the belief that further rises are probable gives investors an incentive to buy (positive feedback—reinforcing the rise, see also stock market bubble); but the increased price of the shares, and the knowledge that there must be a peak after which the market falls, ends up deterring buyers (negative feedback—stabilizing the rise).
• Once the market begins to fall regularly (a bear market), some investors may expect further losing days and refrain from buying (positive feedback—reinforcing the fall), but others may buy because stocks become more and more of a bargain (negative feedback—stabilizing the fall).

George Soros used the word reflexivity, to describe feedback in the financial markets and developed an investment theory based on this principle.

The conventional economic equilibrium model of supply and demand supports only ideal linear negative feedback and was heavily criticized by Paul Ormerod in his book The Death of Economics, which, in turn, was criticized by traditional economists. This book was part of a change of perspective as economists started to recognise that chaos theory applied to nonlinear feedback systems including financial markets.

See also

• Audio feedback
• Cybernetics
• Feedback passivation
• Feedforward
• Interaction
• Low-key feedback
• Negative feedback
• Negative feedback amplifier
• Optical feedback
• Perverse incentive
• Positive feedback
• Recursion
• Resonance
• Stability criterion
• Tactile
• Unintended consequence

References

Further reading

• Katie Salen and Eric Zimmerman. Rules of Play. MIT Press. 2004. ISBN 0-262-24045-9. Chapter 18: Games as Cybernetic Systems.
• Korotayev A., Malkov A., Khaltourina D. Introduction to Social Macrodynamics: Secular Cycles and Millennial Trends. Moscow: URSS, 2006. ISBN 5-484-00559-0
• Dijk, E., Cremer, D.D., Mulder, L.B., and Stouten, J. "How Do We React to Feedback in Social Dilemmas?" In Biel, Eek, Garling & Gustafsson, (eds.), New Issues and Paradigms in Research on Social Dilemmas, New York: Springer, 2008.

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

• 1. 糖尿病における糸球体過剰ろ過の機序 mechanisms of glomerular hyperfiltration in diabetes mellitus
• 2. Overview of hemostasis
• 3. 血管新生阻害剤の概要 overview of angiogenesis inhibitors
• 4. クッシング症候群の原因および病態生理 causes and pathophysiology of cushings syndrome
• 5. 思春期における多嚢胞性卵巣症候群の病態生理および病因 pathophysiology and etiology of polycystic ovary syndrome in adolescents

English Journal

• Primary Cilium Regulates CaV1.2 Expression Through Wnt Signaling.

• Muntean BS1, Jin X, Williams FE, Nauli SM.
• Journal of cellular physiology.J Cell Physiol.2014 Dec;229(12):1926-34. doi: 10.1002/jcp.24642.
• Primary cilia are sensory organelles that provide a feedback mechanism to restrict Wnt signaling in the absence of endogenous Wnt activators. Abnormal Wnt signaling has been shown to result in polycystic kidney disease (PKD) although the exact mechanism has been debated. Previously, we reported that
• PMID 24700505

• LMIR5 extracellular domain activates myeloid cells through Toll-like receptor 4.

• Phongsisay V1, Iizasa E2, Hara H2, Yamasaki S3.
• Molecular immunology.Mol Immunol.2014 Nov;62(1):169-77. doi: 10.1016/j.molimm.2014.06.012. Epub 2014 Jul 5.
• LMIR5/CD300b is an activating immunoglobulin-like receptor whose extracellular domain (LMIR5-Fc) is constitutively released from immune cells. The release of LMIR5-Fc is augmented upon stimulation with TLR agonists. LMIR5-Fc is reported to possess inflammatory activity and amplify LPS-induced lethal
• PMID 25004110

• Which behaviour change techniques are most effective at increasing older adults' self-efficacy and physical activity behaviour? A systematic review.

• French DP1, Olander EK, Chisholm A, Mc Sharry J.
• Annals of behavioral medicine : a publication of the Society of Behavioral Medicine.Ann Behav Med.2014 Oct;48(2):225-34. doi: 10.1007/s12160-014-9593-z.
• BACKGROUND: Increasing self-efficacy is an effective mechanism for increasing physical activity, especially for older people.PURPOSE: The aim of this review was to identify behaviour change techniques (BCTs) that increase self-efficacy and physical activity behaviour in non-clinical community-dwelli
• PMID 24648017

Japanese Journal

• パラレルメカニズムを利用した力覚フィードバック装置

• 池田 潔
• 日本ロボット学会誌 30(2), 168-169, 2012-03-15
• NAID 10030209153

• パラレルメカニズムのハプティックス応用

• 荒田 純平
• 日本ロボット学会誌 30(2), 144-147, 2012-03-15
• NAID 10030209097

Related Links

• Feedback mechanism - Biology-Online Dictionary

Home » Adaptive » Feedback mechanism Definition noun (1) A loop system in which the system responds to perturbation either in the same direction (positive feedback) or in the opposite direction (negative feedback). (2) A process ...

• Feedback mechanism | definition of feedback mechanism by ...

feed·back in·hi·bi·tion (fēd'bak in'hi-bish'ŭn) Inhibition of activity by an end product of the pathway of which that activity is a part. Synonym(s): feedback mechanism. Fig. 159 Feedback mechanism . Excess production of X causes a ...

Related Pictures

---

★リンクテーブル★

拡張検索	「negative feedback mechanism」
関連記事	「feedback」「mechanism」

「negative feedback mechanism」

　　[★] ネガティブフィードバック機構

「feedback」

　　[★]

• フィードバック、帰還

関

return

　 　 　

「mechanism」

　　[★]

• n.

• 機構、メカニズム