fuming nitric acid

• 発煙硝酸

WordNet

1. street name for lysergic acid diethylamide (同)back breaker, battery-acid, dose, dot, Elvis, loony toons, Lucy in the sky with diamonds, pane, superman, window pane, Zen
2. any of various water-soluble compounds having a sour taste and capable of turning litmus red and reacting with a base to form a salt
3. having the characteristics of an acid; "an acid reaction"

PrepTutorEJDIC

1. 酸性の / 酸味のある,すっぱい(sour) / (言葉・態度などが)厳しい,しんらつな / 酸 / すっぱいもの / 《俗》=LSD
2. 窒素の,窒素を含む

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2013/10/26 17:30:08」(JST)

wiki en

[Wiki en表示]

Nitric acid
IUPAC name Nitric acid
Identifiers
CAS number	7697-37-2 Y
PubChem	944
ChemSpider	919 Y
UNII	411VRN1TV4 Y
EC number	231-714-2
UN number	2031
KEGG	D02313 Y
MeSH	Nitric+acid
ChEBI	CHEBI:48107 Y
ChEMBL	CHEMBL1352 Y
RTECS number	QU5775000
Gmelin Reference	1576
3DMet	B00068
Jmol-3D images	Image 1 Image 2
SMILES [N+](=O)(O)[O-] ON(=O)=O
InChI InChI=1S/HNO3/c2-1(3)4/h(H,2,3,4) Y Key: GRYLNZFGIOXLOG-UHFFFAOYSA-N Y InChI=1/HNO3/c2-1(3)4/h(H,2,3,4) Key: GRYLNZFGIOXLOG-UHFFFAOYAO
Properties
Molecular formula	HNO3
Molar mass	63.01 g mol−1
Appearance	Colorless liquid
Density	1.5129 g cm−3
Melting point	-42 °C, 231 K, -44 °F
Boiling point	83 °C, 356 K, 181 °F (68% solution boils at 121 °C)
Solubility in water	Completely miscible
Acidity (pKa)	-1.4
Refractive index (nD)	1.397 (16.5 °C)
Dipole moment	2.17 ± 0.02 D
Thermochemistry
Std enthalpy of formation ΔfHo298	−207 kJ·mol−1
Standard molar entropy So298	146 J·mol−1·K−1
Hazards
MSDS	ICSC 0183 PCTL Safety Website
EU Index	007-004-00-1
EU classification	C O
R-phrases	R8 R35
S-phrases	(S1/2) S23 S26 S36 S45
NFPA 704	0 4 0 OX
Flash point	Non-flammable
Related compounds
Other anions	Nitrous acid
Other cations	Sodium nitrate Potassium nitrate Ammonium nitrate
Related compounds	Dinitrogen pentoxide
Y (verify) (what is: Y/N?) Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Nitric acid (HNO₃), also known as aqua fortis and spirit of niter, is a highly corrosive strong mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68%. When the solution contains more than 86% HNO₃, it is referred to as fuming nitric acid. Depending on the amount of nitrogen dioxide present, fuming nitric acid is further characterized as white fuming nitric acid or red fuming nitric acid, at concentrations above 95%.

Nitric acid is the primary reagent used for nitration - the addition of a nitro group, typically to an organic molecule. While some resulting nitro compounds are shock- and thermally-sensitive explosives, a few are stable enough to be used in munitions and demolition, while others are still more stable and used as pigments in inks and dyes. Nitric acid is also commonly used as a strong oxidizing agent.

Physical and chemical properties

Commercially available nitric acid is an azeotrope with water at a concentration of 68% HNO₃, which is the ordinary concentrated nitric acid of commerce. This solution has a boiling temperature of 120.5 °C at 1 atm. Two solid hydrates are known; the monohydrate (HNO₃·H₂O) and the trihydrate (HNO₃·3H₂O).

Nitric acid 70%

Nitric acid of commercial interest usually consists of the maximum boiling azeotrope of nitric acid and water, which is approximately 68% HNO₃, (approx. 15 molar). This is considered concentrated or technical grade, while reagent grades are specified at 70% HNO₃. The density of concentrated nitric acid is 1.42 g/mL. An older density scale is occasionally seen, with concentrated nitric acid specified as 42° Baumé.

Contamination with nitrogen dioxide

Fuming nitric acid contaminated with yellow nitrogen dioxide.

Nitric acid is subject to thermal or light decomposition: 4 HNO₃ → 2 H₂O + 4 NO₂ + O₂. This reaction may give rise to some non-negligible variations in the vapor pressure above the liquid because the nitrogen oxides produced dissolve partly or completely in the acid.

The nitrogen dioxide (NO₂) remains dissolved in the nitric acid coloring it yellow or even red at higher temperatures. While the pure acid tends to give off white fumes when exposed to air, acid with dissolved nitrogen dioxide gives off reddish-brown vapors, leading to the common name "red fuming acid" or "fuming nitric acid". Fuming nitric acid is also referred to as 16 molar nitric acid. It is the most concentrated form of nitric acid at Standard Temperature and Pressure (STP). Nitrogen oxides (NO_x) are soluble in nitric acid.

Fuming nitric acid

Main article: Red fuming nitric acid

A commercial grade of fuming nitric acid, referred to in the trade as "strong nitric acid" contains 90% HNO₃ and has a density of 1.50 g/mL. This grade is much used in the explosives industry. It is not as volatile nor as corrosive as the anhydrous acid and has the approximate concentration of 21.4 molar.

Red fuming nitric acid, or RFNA, contains substantial quantities of dissolved nitrogen dioxide (NO₂) leaving the solution with a reddish-brown color. One formulation of RFNA specifies a minimum of 17% NO₂, another specifies 13% NO₂. Because of the dissolved nitrogen dioxide, the density of red fuming nitric acid is lower at 1.490 g/mL.

An inhibited fuming nitric acid (either IWFNA, or IRFNA) can be made by the addition of 0.6 to 0.7% hydrogen fluoride (HF). This fluoride is added for corrosion resistance in metal tanks. The fluoride creates a metal fluoride layer that protects the metal.

Anhydrous nitric acid

Main article: White fuming nitric acid

White fuming nitric acid, pure nitric acid or WFNA, is very close to anhydrous nitric acid. It is available as 99.9% nitric acid by assay. One specification for white fuming nitric acid is that it has a maximum of 2% water and a maximum of 0.5% dissolved NO₂. Anhydrous nitric acid has a density of 1.513 g/mL and has the approximate concentration of 24 molar. Anhydrous nitric acid is a colorless mobile liquid with a density of 1.512 g/cm³, which solidifies at −42 °C to form white crystals as it decomposes to NO₂ and water, it obtains a yellow tint. It boils at 83 °C. It is usually stored in a glass shatterproof amber bottle with twice the volume of head space to allow for pressure build up. When received, the pressure must be released and repeated monthly until finished.

Structure and bonding

Two major resonance representations of HNO₃.

The molecule is planar. Two of the N-O bonds are equivalent and relatively short (this can be explained by theories of resonance. The canonical forms show double bond character in these two bonds, causing them to be shorter than typical N-O bonds.), and the third N-O bond is elongated because the O is also attached to a proton.

Reactions

Acid-base properties

Nitric acid is normally considered to be a strong acid at ambient temperatures. There is some disagreement over the value of the acid dissociation constant, though the pK_a value is usually reported as less than −1. This means that the nitric acid in solution is fully dissociated except in extremely acidic solutions. The pK_a value rises to 1 at a temperature of 250 °C.

Nitric acid can act as a base with respect to an acid such as sulfuric acid.

HNO₃ + 2H₂SO₄ NO₂⁺ + H₃O⁺ + 2HSO₄^–; K ~ 22

The nitronium ion, NO₂⁺, is the active reagent in aromatic nitration reactions. Since nitric acid has both acidic and basic properties it can undergo an autoprotolysis reaction, similar to the self-ionization of water

2HNO₃ NO₂⁺ + NO₃^– + H₂O

Reactions with metals

Nitric acid reacts with most metals but the details depend on the concentration of the acid and the nature of the metal. Dilute nitric acid behaves as a typical acid in its reaction with most metals. Magnesium, manganese and zinc liberate H₂. Others give the nitrogen oxides.

Nitric acid can oxidize non-active metals such as copper and silver. With these non-active or less electropositive metals the products depend on temperature and the acid concentration. For example, copper reacts with dilute nitric acid at ambient temperatures with a 3:8 stoichiometry.

3 Cu + 8 HNO₃ → 3 Cu²⁺ + 2 NO + 4 H₂O + 6 NO₃⁻

The nitric oxide produced may react with atmospheric oxygen to give nitrogen dioxide. With more concentrated nitric acid, nitrogen dioxide is produced directly in a reaction with 1:4 stoichiometry.

Cu + 4 H⁺ + 2 NO₃⁻ → Cu²⁺ + 2 NO₂ + 2 H₂O

Upon reaction with nitric acid, most metals give the corresponding nitrates. Some metalloids and metals give the oxides, for instance, Sn, As, Sb, Ti are oxidized into SnO₂, As₂O₅, Sb₂O₅ and TiO₂ respectively.

Some precious metals, such as pure gold and platinum group metals do not react with nitric acid, though pure gold does react with aqua regia, a mixture of concentrated nitric acid and hydrochloric acid. However, some less noble metals (Ag, Cu, ...) present in some gold alloys relatively poor in gold such as colored gold can be easily oxidized and dissolved by nitric acid, leading to colour changes of the gold-alloy surface. Nitric acid is used as a cheap means in jewelry shops to quickly spot low-gold alloys (< 14 carats) and to rapidly assess the gold purity.

Being a powerful oxidizing agent, nitric acid reacts violently with many non-metallic compounds and the reactions may be explosive. Depending on the acid concentration, temperature and the reducing agent involved, the end products can be variable. Reaction takes place with all metals except the noble metals series and certain alloys. As a general rule, oxidizing reactions occur primarily with the concentrated acid, favoring the formation of nitrogen dioxide (NO₂). However, the powerful oxidizing properties of nitric acid is thermodynamic in nature, but sometimes its oxidation reactions are rather kinetically non-favored. The presence of small amounts of nitrous acid (HNO₂) greatly enhance the rate of reaction.

Although chromium (Cr), iron (Fe) and aluminium (Al) readily dissolve in dilute nitric acid, the concentrated acid forms a metal oxide layer that protects the bulk of the metal from further oxidation. The formation of this protective layer is called passivation. Typical passivation concentrations range from 20–50% by volume (See ASTM A967-05). Metals which are passivated by concentrated nitric acid are Iron, Cobalt, Chromium, Nickel, and Aluminium.

Reactions with non-metals

Being a powerful oxidizing acid, nitric acid reacts violently with many organic materials and the reactions may be explosive. The hydroxyl group will typically strip a hydrogen from the organic molecule to form water, and the remaining nitro group takes the hydrogen's place. Nitration of organic compounds with nitric acid is the primary method of synthesis of many common explosives, such as nitroglycerin and TNT. As very many less stable byproducts are possible, these reactions must be carefully thermally controlled, and the byproducts removed to isolate the desired product.

Reaction with non-metallic elements, with the exceptions of nitrogen, oxygen, noble gases, silicon and halogens, usually oxidizes them to their highest oxidation states as acids with the formation of nitrogen dioxide for concentrated acid and nitric oxide for dilute acid.

C + 4 HNO₃ → CO₂ + 4 NO₂ + 2 H₂O

or

3 C + 4 HNO₃ → 3 CO₂ + 4 NO + 2 H₂O

Concentrated nitric acid oxidizes I₂, P₄ and S₈ into HIO₃, H₃PO₄ and H₂SO₄ respectively.

Xanthoproteic test

Nitric acid reacts with proteins to form yellow nitrated products. This reaction is known as the xanthoproteic reaction. This test is carried out by adding concentrated nitric acid to the substance being tested, and then heating the mixture. If proteins that contain amino acids with aromatic rings are present, the mixture turns yellow. Upon adding a strong base such as liquid ammonia, the color turns orange. These color changes are caused by nitrated aromatic rings in the protein. Xanthoproteic acid is formed when the acid contacts epithelial cells and is indicative of inadequate safety precautions when handling nitric acid.

Production

Nitric acid is made by reaction of nitrogen dioxide (NO₂) with water.

3 NO₂ + H₂O → 2 HNO₃ + NO

Normally, the nitric oxide produced by the reaction is reoxidized by the oxygen in air to produce additional nitrogen dioxide.

Bubbling nitrogen dioxide through hydrogen peroxide can help to improve acid yield.

2 NO₂ + H₂O₂ → 2 HNO₃

Commercial grade nitric acid solutions are usually between 52% and 68% nitric acid. Production of nitric acid is via the Ostwald process, named after German chemist Wilhelm Ostwald. In this process, anhydrous ammonia is oxidized to nitric oxide, in the presence of platinum or rhodium gauze catalyst at a high temperature of about 500 K and a pressure of 9 bar.

4 NH₃ (g) + 5 O₂ (g) → 4 NO (g) + 6 H₂O (g) (ΔH = −905.2 kJ)

Nitric oxide is then reacted with oxygen in air to form nitrogen dioxide.

2 NO (g) + O₂ (g) → 2 NO₂ (g) (ΔH = −114 kJ/mol)

This is subsequently absorbed in water to form nitric acid and nitric oxide.

3 NO₂ (g) + H₂O (l) → 2 HNO₃ (aq) + NO (g) (ΔH = −117 kJ/mol)

The nitric oxide is cycled back for reoxidation. Alternatively, if the last step is carried out in air:

4 NO₂ (g) + O₂ (g) + 2 H₂O (l) → 4 HNO₃ (aq)

The aqueous HNO₃ obtained can be concentrated by distillation up to about 68% by mass. Further concentration to 98% can be achieved by dehydration with concentrated H₂SO₄. By using ammonia derived from the Haber process, the final product can be produced from nitrogen, hydrogen, and oxygen which are derived from air and natural gas as the sole feedstocks.

Prior to the introduction of the Haber process for the production of ammonia in 1913, nitric acid was produced using the Birkeland–Eyde process, also known as the arc process. This process is based upon the oxidation of atmospheric nitrogen by atmospheric oxygen to nitric oxide at very high temperatures. An electric arc was used to provide the high temperatures, and yields of up to 4% nitric oxide were obtained. The nitric oxide was cooled and oxidized by the remaining atmospheric oxygen to nitrogen dioxide, and this was subsequently absorbed in dilute nitric acid. The process was very energy intensive and was rapidly displaced by the Ostwald process once cheap ammonia became available.

Laboratory synthesis

In laboratory, nitric acid can be made by thermal decomposition of copper(II) nitrate, producing nitrogen dioxide and oxygen gases, which are then passed through water to give nitric acid.

2 Cu(NO₃)₂ → 2 CuO(s) + 4 NO₂(g) + O₂(g)

An alternate route is by reaction of approximately equal masses of any nitrate salt such as sodium nitrate with 96% sulfuric acid (H₂SO₄), and distilling this mixture at nitric acid's boiling point of 83 °C. A nonvolatile residue of the metal sulfate remains in the distillation vessel. The red fuming nitric acid obtained may be converted to the white nitric acid.

2 NaNO₃ + H₂SO₄ → 2 HNO₃ + Na₂SO₄

The dissolved NO_x are readily removed using reduced pressure at room temperature (10–30 min at 200 mmHg or 27 kPa) to give white fuming nitric acid. This procedure can also be performed under reduced pressure and temperature in one step in order to produce less nitrogen dioxide gas.^{[citation needed]}

Dilute nitric acid may be concentrated by distillation up to 68% acid, which is a maximum boiling azeotrope containing 32% water. In the laboratory, further concentration involves distillation with either sulfuric acid or magnesium nitrate which act as dehydrating agents. Such distillations must be done with all-glass apparatus at reduced pressure, to prevent decomposition of the acid. Industrially, strong nitric acid is produced by dissolving additional nitrogen dioxide in 68% nitric acid in an absorption tower. Dissolved nitrogen oxides are either stripped in the case of white fuming nitric acid, or remain in solution to form red fuming nitric acid. More recently, electrochemical means have been developed to produce anhydrous acid from concentrated nitric acid feedstock.

Uses

Nitric acid in a laboratory.

The main use of nitric acid is for the production of fertilizers. Nitric acid is neutralized with ammonia to give ammonium nitrate. This application consumes 75–80% of the 26M tons produced annually (1987). The other main applications are for the production of explosives, nylon precursors, and specialty organic compounds.

Precursor to organic nitrogen compounds

In organic synthesis, industrial and otherwise, the nitro group is a versatile functionality. Most derivatives of aniline are prepared via nitration of aromatic compounds followed by reduction. Nitrations entail combining nitric and sulfuric acids to generate the nitronium ion, which electrophilically reacts with aromatic compounds such as benzene. Many explosives, e.g. TNT, are prepared in this way.

See also: nitration

The precursor to nylon, adipic acid, is produced on a large scale by oxidation of cyclohexanone and cyclohexanol with nitric acid.

Rocket propellant

Nitric acid has been used in various forms as the oxidizer in liquid-fueled rockets. These forms include red fuming nitric acid, white fuming nitric acid, mixtures with sulfuric acid, and these forms with HF inhibitor. IRFNA (inhibited red fuming nitric acid) was one of 3 liquid fuel components for the BOMARC missile.

Niche uses

Analytical reagent

In elemental analysis by ICP-MS, ICP-AES, GFAA, and Flame AA, dilute nitric acid (0.5 to 5.0%) is used as a matrix compound for determining metal traces in solutions. Ultrapure trace metal grade acid is required for such determination, because small amounts of metal ions could affect the result of the analysis.

It is also typically used in the digestion process of turbid water samples, sludge samples, solid samples as well as other types of unique samples which require elemental analysis via ICP-MS, ICP-OES, ICP-AES, GFAA and flame atomic absorption spectroscopy. Typically these digestions use a 50% solution of the purchased HNO
3 mixed with Type 1 DI Water.

In electrochemistry, nitric acid is used as a chemical doping agent for organic semiconductors, and in purification processes for raw carbon nanotubes.

Woodworking

In a low concentration (approximately 10%), nitric acid is often used to artificially age pine and maple. The color produced is a grey-gold very much like very old wax or oil finished wood (wood finishing).

Etchant and cleaning agent

The corrosive effects of nitric acid are exploited for a number of specialty applications, such as pickling stainless steel. A solution of nitric acid, water and alcohol, Nital, is used for etching of metals to reveal the microstructure. ISO 14104 is one of the standards detailing this well known procedure.

Commercially available aqueous blends of 5–30% nitric acid and 15–40% phosphoric acid are commonly used for cleaning food and dairy equipment primarily to remove precipitated calcium and magnesium compounds (either deposited from the process stream or resulting from the use of hard water during production and cleaning). The phosphoric acid content helps to passivate ferrous alloys against corrosion by the dilute nitric acid.^{[citation needed]}

Nitric acid can be used as a spot test for alkaloids like LSD, giving a variety of colours depending on the alkaloid.

Safety

Nitric acid is a strong acid and a powerful oxidizing agent. The major hazard posed by it is chemical burns as it carries out acid hydrolysis with proteins (amide) and fats (ester) which consequently decomposes living tissue (e.g. skin and flesh). Concentrated nitric acid stains human skin yellow due to its reaction with the keratin. These yellow stains turn orange when neutralized. Systemic effects are unlikely, however, and the substance is not considered a carcinogen or mutagen.

The standard first aid treatment for acid spills on the skin is, as for other corrosive agents, irrigation with large quantities of water. Washing is continued for at least ten to fifteen minutes to cool the tissue surrounding the acid burn and to prevent secondary damage. Contaminated clothing is removed immediately and the underlying skin washed thoroughly.

Being a strong oxidizing agent, reactions of nitric acid with compounds such as cyanides, carbides, metallic powders can be explosive and those with many organic compounds, such as turpentine, are violent and hypergolic (i.e. self-igniting). Hence, it should be stored away from bases and organics.

History

The first mention of nitric acid is in Pseudo-Geber's De Inventione Veritatis, wherein it is obtained by calcining a mixture of niter, alum and blue vitriol. It was again described by Albert the Great in the 13th century and by Ramon Lull, who prepared it by heating niter and clay and called it "eau forte" (aqua fortis).

Glauber devised the process still used today to obtain it, namely by heating niter with strong sulfuric acid. In 1776 Lavoisier showed that it contained oxygen, and in 1785 Henry Cavendish determined its precise composition and showed that it could be synthesized by passing a stream of electric sparks through moist air.

References

External links

• NIOSH Pocket Guide to Chemical Hazards
• National Pollutant Inventory – Nitric Acid Fact Sheet
• Calculators: surface tensions, and densities, molarities and molalities of aqueous nitric acid

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

• 1. ポルフィリン症：概要 porphyrias an overview
• 2. 呼気中一酸化窒素の分析および適用 exhaled nitric oxide analysis and applications
• 3. 胎児の酸塩基の生理学 fetal acid base physiology
• 4. 胃酸分泌の生理学 physiology of gastric acid secretion
• 5. 心不全における一酸化窒素、その他のホルモン、サイトカイン、およびケモカイン nitric oxide other hormones cytokines and chemokines in heart failure

English Journal

• Oxoanionic noble metal compounds from fuming nitric acid: the palladium examples Pd(NO3)2 and Pd(CH3SO3)2.

• Bruns J1, Klüner T, Wickleder MS.
• Chemistry (Weinheim an der Bergstrasse, Germany).Chemistry.2015 Jan 12;21(3):1294-301. doi: 10.1002/chem.201405355. Epub 2014 Nov 27.
• The oxidation of elemental palladium at 100 °C in a mixture of fuming nitric acid and a pyridine-SO3 complex leads to the anhydrous nitrate Pd(NO3)2 (monoclinic, P2(1)/n, Z=2, a=469.12(3) pm, b=593.89(3) pm, c=805.72(4) pm, β=105.989(3)°, V=215.79(2) Å(3)). The Pd(2+) ions are in square-plan
• PMID 25431333

• Amine-boranes: green hypergolic fuels with consistently low ignition delays.

• Ramachandran PV1, Kulkarni AS, Pfeil MA, Dennis JD, Willits JD, Heister SD, Son SF, Pourpoint TL.
• Chemistry (Weinheim an der Bergstrasse, Germany).Chemistry.2014 Dec 15;20(51):16869-72. doi: 10.1002/chem.201405224. Epub 2014 Nov 3.
• Complexation of amines with borane converts them to hypergols or decreases their ignition delays (IDs) multifold (with white fuming nitric acid as the oxidant). With consistently low IDs, amine-boranes represent a class of compounds that can be promising alternatives to toxic hydrazine and its deriv
• PMID 25367843

• The toxicity of graphene oxides: dependence on the oxidative methods used.

• Chng EL1, Pumera M.
• Chemistry (Weinheim an der Bergstrasse, Germany).Chemistry.2013 Jun 17;19(25):8227-35. doi: 10.1002/chem.201300824. Epub 2013 Apr 29.
• Graphene, a class of two-dimensional carbon nanomaterial, has attracted extensive interest in recent years, with a significant amount of research focusing on graphene oxides (GOs). They have been primed as potential candidates for biomedical applications such as cell labeling and drug delivery, thus
• PMID 23630053

Japanese Journal

• 衝撃加圧によるリン酸トリ-n-ブチル/発煙硝酸混合物の反応伝播

• Science and Technology of Energetic Materials : journal of the Japan Explosive Society 70(1), 6-9, 2009-04-30
• NAID 10024975716

• 半球型カリックスアレン類縁体の異性化挙動と官能基導入

• 基礎有機化学討論会要旨集（基礎有機化学連合討論会予稿集） 2008(0), 11-11, 2008
• NAID 130004645214

• エチレンジアミン四酢酸を用いるプレカラム誘導体化/逆相分配高速液体クロマトグラフィーによる鉄鋼中の微量ビスマスの定量(<特集>分析技術と方法論の最近の進歩)

• 鐵と鋼 : 日本鐡鋼協會々誌 93(2), 94-99, 2007-02-01
• NAID 110006164988

Related Links

• Application | Nitric Acid | Chemtradeasia | Nitric Acid

A commercial grade of fuming nitric acid, referred to in the trade as "strong nitric acid" contains 90% HNO3 and has a density of 1.50Â g/mL. ... Application Red fuming nitric acid A commercial grade of fuming nitric acid, referred to ...

• Fuming HNO3 | Nitric Acid, INFORMATION

Fuming HNO3 is the chemical formulation for Fuming Nitric Acid. Fuming HNO3 is also commonly referred to as Fuming Aqua Fortis and Fuming Spirit of Nitre,

Related Pictures

---

★リンクテーブル★

関連記事

「nitric」

「nitric」

　　[★]

• adj.

• 窒素の

関

N、N2、nitrogen