principal component

• 主成分

関

main component、main ingredient

WordNet

1. capital as contrasted with the income derived from it (同)corpus, principal sum
2. the original amount of a debt on which interest is calculated
3. the major party to a financial transaction at a stock exchange; buys and sells for his own account (同)dealer
4. the educator who has executive authority for a school; "she sent unruly pupils to see the principal" (同)school principal, head teacher, head
5. (criminal law) any person involved in a criminal offense, regardless of whether the person profits from such involvement
6. an artifact that is one of the individual parts of which a composite entity is made up; especially a part that can be separated from or attached to a system; "spare components for cars"; "a component or constituent element of a system" (同)constituent, element
7. an abstract part of something; "jealousy was a component of his character"; "two constituents of a musical composition are melody and harmony"; "the grammatical elements of a sentence"; "a key factor in her success"; "humor: an effective ingredient of a s (同)constituent, element, factor, ingredient

PrepTutorEJDIC

1. (重要性・地位・価値などが)『第1の』;おもな,主要な / 『長』,かしら;重要人物,主役 / 《しばしばP-》(小・中学校,高校の)『校長』;(特に《英》でcollegeの)学長,(時に)学寮長 / 《単数形で》(interest(利子),revenue(運用収益)と区別して)『元金』,基本財産
2. 構成している,成分の / 構成要素,成分

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2013/04/26 17:36:19」(JST)

wiki en

[Wiki en表示]

PCA of a multivariate Gaussian distribution centered at (1,3) with a standard deviation of 3 in roughly the (0.878, 0.478) direction and of 1 in the orthogonal direction. The vectors shown are the eigenvectors of the covariance matrix scaled by the square root of the corresponding eigenvalue, and shifted so their tails are at the mean.

Principal component analysis (PCA) is a mathematical procedure that uses an orthogonal transformation to convert a set of observations of possibly correlated variables into a set of values of linearly uncorrelated variables called principal components. The number of principal components is less than or equal to the number of original variables. This transformation is defined in such a way that the first principal component has the largest possible variance (that is, accounts for as much of the variability in the data as possible), and each succeeding component in turn has the highest variance possible under the constraint that it be orthogonal to (i.e., uncorrelated with) the preceding components. Principal components are guaranteed to be independent only if the data set is jointly normally distributed. PCA is sensitive to the relative scaling of the original variables.

Depending on the field of application, it is also named the discrete Karhunen–Loève transform (KLT), the Hotelling transform in multivariate quality control, proper orthogonal decomposition (POD), singular value decomposition (SVD) of X (Golub and Van Loan, 1983), eigenvalue decomposition (EVD) of X^TX in linear algebra, factor analysis, Eckart–Young theorem in psychometrics (Harman, 1960), Schmidt–Mirsky theorem, empirical orthogonal functions (EOF) in meteorological science, empirical eigenfunction decomposition (Sirovich, 1987), empirical component analysis (Lorenz, 1956), quasiharmonic modes (Brooks et al., 1988), spectral decomposition in noise and vibration, and empirical modal analysis in structural dynamics.

PCA was invented in 1901 by Karl Pearson. It is mostly used as a tool in exploratory data analysis and for making predictive models. PCA can be done by eigenvalue decomposition of a data covariance (or correlation) matrix or singular value decomposition of a data matrix, usually after mean centering (and normalizing or using Z-scores) the data matrix for each attribute. The results of a PCA are usually discussed in terms of component scores, sometimes called factor scores (the transformed variable values corresponding to a particular data point), and loadings (the weight by which each standardized original variable should be multiplied to get the component score).

PCA is the simplest of the true eigenvector-based multivariate analyses. Often, its operation can be thought of as revealing the internal structure of the data in a way that best explains the variance in the data. If a multivariate dataset is visualised as a set of coordinates in a high-dimensional data space (1 axis per variable), PCA can supply the user with a lower-dimensional picture, a "shadow" of this object when viewed from its (in some sense; see below) most informative viewpoint. This is done by using only the first few principal components so that the dimensionality of the transformed data is reduced.

PCA is closely related to factor analysis. Factor analysis typically incorporates more domain specific assumptions about the underlying structure and solves eigenvectors of a slightly different matrix.

PCA is also related to canonical correlation analysis (CCA). CCA defines coordinate systems that optimally describe the cross-covariance between two datasets while PCA defines a new orthogonal coordinate system that optimally describes variance in a single dataset.

Details

PCA is mathematically defined as an orthogonal linear transformation that transforms the data to a new coordinate system such that the greatest variance by any projection of the data comes to lie on the first coordinate (called the first principal component), the second greatest variance on the second coordinate, and so on.

Define a data matrix, X^T, with zero empirical mean (the empirical (sample) mean of the distribution has been subtracted from the data set), where each of the n rows represents a different repetition of the experiment, and each of the m columns gives a particular kind of datum (say, the results from a particular probe). (Note that X^T is defined here and not X itself, and what we are calling X^T is often alternatively denoted as X itself.) The singular value decomposition of X is X = WΣV^T, where the m × m matrix W is the matrix of eigenvectors of the covariance matrix XX^T, the matrix Σ is an m × n rectangular diagonal matrix with nonnegative real numbers on the diagonal, and the n × n matrix V is the matrix of eigenvectors of X^TX. The PCA transformation that preserves dimensionality (that is, gives the same number of principal components as original variables) Y is then given by:

$\begin{align} \mathbf{Y}^{\rm T} & = \mathbf{X}^{\rm T}\mathbf{W} \\ & = (\mathbf{W}\mathbf{\Sigma}\mathbf{V}^{\rm T})^{\rm T}\mathbf{W} \\ & = \mathbf{V}\mathbf{\Sigma}^{\rm T}\mathbf{W}^{\rm T}\mathbf{W} \\ & = \mathbf{V}\mathbf{\Sigma}^{\rm T} \end{align}$

V is not uniquely defined in the usual case when m < n − 1, but Y will usually still be uniquely defined. Since W (by definition of the SVD of a real matrix) is an orthogonal matrix, each row of Y^T is simply a linear transformation of the corresponding row of X^T. The first column of Y^T is made up of the "scores" of the cases with respect to the "principal" component, the next column has the scores with respect to the "second principal" component, and so on.

If we want a reduced-dimensionality representation, we can project X down into the reduced space defined by only the first L singular vectors, W_L:

where with the rectangular identity matrix.

The matrix W of singular vectors of X is equivalently the matrix W of eigenvectors of the matrix of observed covariances C = X X^T,

Given a set of points in Euclidean space, the first principal component corresponds to a line that passes through the multidimensional mean and minimizes the sum of squares of the distances of the points from the line. The second principal component corresponds to the same concept after all correlation with the first principal component has been subtracted from the points. The singular values (in Σ) are the square roots of the eigenvalues of the matrix XX^T. Each eigenvalue is proportional to the portion of the "variance" (more correctly of the sum of the squared distances of the points from their multidimensional mean) that is correlated with each eigenvector. The sum of all the eigenvalues is equal to the sum of the squared distances of the points from their multidimensional mean. PCA essentially rotates the set of points around their mean in order to align with the principal components. This moves as much of the variance as possible (using an orthogonal transformation) into the first few dimensions. The values in the remaining dimensions, therefore, tend to be small and may be dropped with minimal loss of information (see below). PCA is often used in this manner for dimensionality reduction. PCA has the distinction of being the optimal orthogonal transformation for keeping the subspace that has largest "variance" (as defined above). This advantage, however, comes at the price of greater computational requirements if compared, for example and when applicable, to the discrete cosine transform, and in particular to the DCT-II which is simply known as the "DCT"; introduced by N. Ahmed, T.Natarajan and K.R.Rao in 1974; see Reference 1 of discrete cosine transform. Nonlinear dimensionality reduction techniques tend to be more computationally demanding than PCA.

PCA is sensitive to the scaling of the variables. If we have just two variables and they have the same sample variance and are positively correlated, then the PCA will entail a rotation by 45° and the "loadings" for the two variables with respect to the principal component will be equal. But if we multiply all values of the first variable by 100, then the principal component will be almost the same as that variable, with a small contribution from the other variable, whereas the second component will be almost aligned with the second original variable. This means that whenever the different variables have different units (like temperature and mass), PCA is a somewhat arbitrary method of analysis. (Different results would be obtained if one used Fahrenheit rather than Celsius for example.) Note that Pearson's original paper was entitled "On Lines and Planes of Closest Fit to Systems of Points in Space" – "in space" implies physical Euclidean space where such concerns do not arise. One way of making the PCA less arbitrary is to use variables scaled so as to have unit variance.

Discussion

Mean subtraction (a.k.a. "mean centering") is necessary for performing PCA to ensure that the first principal component describes the direction of maximum variance. If mean subtraction is not performed, the first principal component might instead correspond more or less to the mean of the data. A mean of zero is needed for finding a basis that minimizes the mean square error of the approximation of the data.

Assuming zero empirical mean (the empirical mean of the distribution has been subtracted from the data set), the principal component w₁ of a data set X can be defined as:

$\mathbf{w}_1 = \underset{\Vert \mathbf{w} \Vert = 1}{\operatorname{\arg\,max}}\,\operatorname{Var}\{ \mathbf{w}^{\rm T} \mathbf{X} \} = \underset{\Vert \mathbf{w} \Vert = 1}{\operatorname{\arg\,max}}\,E\left\{ \left( \mathbf{w}^{\rm T} \mathbf{X}\right)^2 \right\}$

(See arg max for the notation.) With the first k − 1 components, the kth component can be found by subtracting the first principal components from X:

$\mathbf{\hat{X}}_{k - 1} = \mathbf{X} - \sum_{i = 1}^{k - 1} \mathbf{w}_i \mathbf{w}_i^{\rm T} \mathbf{X}$

and by substituting this as the new data set to find a principal component in

$\mathbf{w}_k = \underset{\Vert \mathbf{w} \Vert = 1}{\operatorname{arg\,max}}\,E\left\{ \left( \mathbf{w}^{\rm T} \mathbf{\hat{X}}_{k - 1} \right)^2 \right\}.$

PCA is equivalent to empirical orthogonal functions (EOF), a name which is used in meteorology.

An autoencoder neural network with a linear hidden layer is similar to PCA. Upon convergence, the weight vectors of the K neurons in the hidden layer will form a basis for the space spanned by the first K principal components. Unlike PCA, this technique will not necessarily produce orthogonal vectors.

PCA is a popular primary technique in pattern recognition. It is not, however, optimized for class separability. An alternative is the linear discriminant analysis, which does take this into account.

Table of symbols and abbreviations

Symbol	Meaning	Dimensions	Indices
	data matrix, consisting of the set of all data vectors, one vector per column
	the number of column vectors in the data set		scalar
	the number of elements in each column vector (dimension)		scalar
	the number of dimensions in the dimensionally reduced subspace,		scalar
	vector of empirical means, one mean for each row m of the data matrix
	vector of empirical standard deviations, one standard deviation for each row m of the data matrix
	vector of all 1's
	deviations from the mean of each row m of the data matrix
	z-scores, computed using the mean and standard deviation for each row m of the data matrix
	covariance matrix
	correlation matrix
	matrix consisting of the set of all eigenvectors of C, one eigenvector per column
	diagonal matrix consisting of the set of all eigenvalues of C along its principal diagonal, and 0 for all other elements
	matrix of basis vectors, one vector per column, where each basis vector is one of the eigenvectors of C, and where the vectors in W are a sub-set of those in V
	matrix consisting of N column vectors, where each vector is the projection of the corresponding data vector from matrix X onto the basis vectors contained in the columns of matrix W.

Properties and limitations of PCA

As noted above, the results of PCA depend on the scaling of the variables.

The applicability of PCA is limited by certain assumptions made in its derivation.

PCA and information theory

The claim that the PCA used for dimensionality reduction preserves most of the information of the data is misleading. Indeed, without any assumption on the signal model, PCA cannot help to reduce the amount of information lost during dimensionality reduction, where information was measured using Shannon entropy.

Under the assumption that

i.e., that the data vector is the sum of the desired information-bearing signal and a noise signal one can show that PCA can be optimal for dimensionality reduction also from an information-theoretic point-of-view.

In particular, Linsker showed that if is Gaussian and is Gaussian noise with a covariance matrix proportional to the identity matrix, the PCA maximizes the mutual information between the desired information and the dimensionality-reduced output .

If the noise is still Gaussian and has a covariance matrix proportional to the identity matrix (i.e., the components of the vector are iid), but the information-bearing signal is non-Gaussian (which is a common scenario), PCA at least minimizes an upper bound on the information loss, which is defined as

The optimality of PCA is also preserved if the noise is iid and at least more Gaussian (in terms of the Kullback-Leibler divergence) than the information-bearing signal . In general, even if the above signal model holds, PCA loses its information-theoretic optimality as soon as the noise becomes dependent.

Computing PCA using the covariance method

The following is a detailed description of PCA using the covariance method (see also here). But note that it is better to use the singular value decomposition (using standard software).

The goal is to transform a given data set X of dimension M to an alternative data set Y of smaller dimension L. Equivalently, we are seeking to find the matrix Y, where Y is the Karhunen–Loève transform (KLT) of matrix X:

Organize the data set

Suppose you have data comprising a set of observations of M variables, and you want to reduce the data so that each observation can be described with only L variables, L < M. Suppose further, that the data are arranged as a set of N data vectors with each representing a single grouped observation of the M variables.

• Write as column vectors, each of which has M rows.
• Place the column vectors into a single matrix X of dimensions M × N.

Calculate the empirical mean

• Find the empirical mean along each dimension m = 1, ..., M.
• Place the calculated mean values into an empirical mean vector u of dimensions M × 1.

Calculate the deviations from the mean

Mean subtraction is an integral part of the solution towards finding a principal component basis that minimizes the mean square error of approximating the data. Hence we proceed by centering the data as follows:

• Subtract the empirical mean vector u from each column of the data matrix X.
• Store mean-subtracted data in the M × N matrix B.

where h is a 1 × N row vector of all 1s:

Find the covariance matrix

• Find the M × M empirical covariance matrix C from the outer product of matrix B with itself:

where

is the conjugate transpose operator. Note that if B consists entirely of real numbers, which is the case in many applications, the "conjugate transpose" is the same as the regular transpose.

• Please note that outer products apply to vectors. For tensor cases we should apply tensor products, but the covariance matrix in PCA is a sum of outer products between its sample vectors; indeed, it could be represented as B.B*. See the covariance matrix sections on the discussion page for more information.
• The reasoning behind using N-1 instead of N to calculate the covariance is Bessel's correction

Find the eigenvectors and eigenvalues of the covariance matrix

• Compute the matrix V of eigenvectors which diagonalizes the covariance matrix C:

where D is the diagonal matrix of eigenvalues of C. This step will typically involve the use of a computer-based algorithm for computing eigenvectors and eigenvalues. These algorithms are readily available as sub-components of most matrix algebra systems, such as R, MATLAB, Mathematica, SciPy, IDL (Interactive Data Language), or GNU Octave as well as OpenCV.

• Matrix D will take the form of an M × M diagonal matrix, where

is the mth eigenvalue of the covariance matrix C, and

• Matrix V, also of dimension M × M, contains M column vectors, each of length M, which represent the M eigenvectors of the covariance matrix C.
• The eigenvalues and eigenvectors are ordered and paired. The mth eigenvalue corresponds to the mth eigenvector.

Rearrange the eigenvectors and eigenvalues

• Sort the columns of the eigenvector matrix V and eigenvalue matrix D in order of decreasing eigenvalue.
• Make sure to maintain the correct pairings between the columns in each matrix.

Compute the cumulative energy content for each eigenvector

• The eigenvalues represent the distribution of the source data's energy among each of the eigenvectors, where the eigenvectors form a basis for the data. The cumulative energy content g for the mth eigenvector is the sum of the energy content across all of the eigenvalues from 1 through m:

^{[citation needed]}

Select a subset of the eigenvectors as basis vectors

• Save the first L columns of V as the M × L matrix W:

where

• Use the vector g as a guide in choosing an appropriate value for L. The goal is to choose a value of L as small as possible while achieving a reasonably high value of g on a percentage basis. For example, you may want to choose L so that the cumulative energy g is above a certain threshold, like 90 percent. In this case, choose the smallest value of L such that

Convert the source data to z-scores (optional)

• Create an M × 1 empirical standard deviation vector s from the square root of each element along the main diagonal of the diagonalized covariance matrix C. (Note, that scaling operations do not commute with the KLT thus we must scale by the variances of the already-decorrelated vector, which is the diagonal of C) :

• Calculate the M × N z-score matrix:

(divide element-by-element)

• Note: While this step is useful for various applications as it normalizes the data set with respect to its variance, it is not integral part of PCA/KLT

Project the z-scores of the data onto the new basis

• The projected vectors are the columns of the matrix

• W* is the conjugate transpose of the eigenvector basis.
• The columns of matrix Y represent the Karhunen–Loeve transforms (KLT) of the data vectors in the columns of matrix X.

Derivation of PCA using the covariance method

Let X be a d-dimensional random vector expressed as column vector. Without loss of generality, assume X has zero mean.

We want to find a orthonormal transformation matrix P so that PX has a diagonal covariant matrix (i.e. PX is a random vector with all its distinct components pairwise uncorrelated).

A quick computation assuming were unitary yields:

$\begin{array}[t]{rcl} \operatorname{var}(PX) &= &\mathbb{E}[PX~(PX)^{\dagger}]\\ &= &\mathbb{E}[PX~X^{\dagger}P^{\dagger}]\\ &= &P~\mathbb{E}[XX^{\dagger}]P^{\dagger}\\ &= &P~\operatorname{cov}(X)P^{-1}\\ \end{array}$

Hence holds if and only if were diagonalisable by .

This is very constructive, as var(X) is guaranteed to be a non-negative definite matrix and thus is guaranteed to be diagonalisable by some unitary matrix.

Iterative computation

In practical implementations especially with high dimensional data (large m), the covariance method is rarely used because it is not efficient. One way to compute the first principal component efficiently is shown in the following pseudo-code, for a data matrix X^T with zero mean, without ever computing its covariance matrix

 a random vector
do c times:
       (a vector of length m)
      for each row 
            
      
return 

This algorithm is simply an efficient way of calculating XX^Tp, normalizing, and placing the result back in p (Power iteration). It avoids the nm² operations of calculating the covariance matrix. p will typically get close to the first principal component of X^T within a small number of iterations, c. (The magnitude of t will be larger after each iteration. Convergence can be detected when it increases by an amount too small for the precision of the machine.)

Subsequent principal components can be computed by subtracting component p from X^T (see Gram–Schmidt) and then repeating this algorithm to find the next principal component. However this simple approach is not numerically stable if more than a small number of principal components are required, because imprecisions in the calculations will additively affect the estimates of subsequent principal components. More advanced methods build on this basic idea, as with the closely related Lanczos algorithm.

One way to compute the eigenvalue that corresponds with each principal component is to measure the difference in mean-squared-distance between the rows and the centroid, before and after subtracting out the principal component. The eigenvalue that corresponds with the component that was removed is equal to this difference.

The NIPALS method

Main article: Non-linear iterative partial least squares

For very high-dimensional datasets, such as those generated in the *omics sciences (e.g., genomics, metabolomics) it is usually only necessary to compute the first few PCs. The non-linear iterative partial least squares (NIPALS) algorithm calculates t₁ and p₁' from X. The outer product, t₁p₁' can then be subtracted from X leaving the residual matrix E₁. This can be then used to calculate subsequent PCs. This results in a dramatic reduction in computational time since calculation of the covariance matrix is avoided.

However, for large data matrices, or matrices that have a high degree of column collinearity, NIPALS suffers from loss of orthogonality due to machine precision limitations accumulated in each iteration step. A Gram-Schmidt (GS) re-orthogonalization algorithm is applied to both the scores and the loadings at each iteration step to eliminate this loss of orthogonality.

Online/sequential estimation

In an "online" or "streaming" situation with data arriving piece by piece rather than being stored in a single batch, it is useful to make an estimate of the PCA projection that can be updated sequentially. This can be done efficiently, but requires different algorithms.

Relation between PCA and K-means clustering

It has been shown recently (2001,2004) that the relaxed solution of K-means clustering, specified by the cluster indicators, is given by the PCA principal components, and the PCA subspace spanned by the principal directions is identical to the cluster centroid subspace specified by the between-class scatter matrix. Thus PCA automatically projects to the subspace where the global solution of K-means clustering lies, and thus facilitates K-means clustering to find near-optimal solutions.

Correspondence analysis

Correspondence analysis (CA) was developed by Jean-Paul Benzécri and is conceptually similar to PCA, but scales the data (which should be non-negative) so that rows and columns are treated equivalently. It is traditionally applied to contingency tables. CA decomposes the chi-squared statistic associated to this table into orthogonal factors. Because CA is a descriptive technique, it can be applied to tables for which the chi-squared statistic is appropriate or not. Several variants of CA are available including detrended correspondence analysis and canonical correspondence analysis. One special extension is multiple correspondence analysis, which may be seen as the counterpart of principal component analysis for categorical data.

Generalizations

Nonlinear generalizations

Linear PCA versus nonlinear Principal Manifolds for visualization of breast cancer microarray data: a) Configuration of nodes and 2D Principal Surface in the 3D PCA linear manifold. The dataset is curved and cannot be mapped adequately on a 2D principal plane; b) The distribution in the internal 2D non-linear principal surface coordinates (ELMap2D) together with an estimation of the density of points; c) The same as b), but for the linear 2D PCA manifold (PCA2D). The "basal" breast cancer subtype is visualized more adequately with ELMap2D and some features of the distribution become better resolved in comparison to PCA2D. Principal manifolds are produced by the elastic maps algorithm. Data are available for public competition. Software is available for free non-commercial use.

Most of the modern methods for nonlinear dimensionality reduction find their theoretical and algorithmic roots in PCA or K-means. Pearson's original idea was to take a straight line (or plane) which will be "the best fit" to a set of data points. Principal curves and manifolds give the natural geometric framework for PCA generalization and extend the geometric interpretation of PCA by explicitly constructing an embedded manifold for data approximation, and by encoding using standard geometric projection onto the manifold, as it is illustrated by Fig. See also the elastic map algorithm and principal geodesic analysis.

Multilinear generalizations

In multilinear subspace learning, PCA is generalized to multilinear PCA (MPCA) that extracts features directly from tensor representations. MPCA is solved by performing PCA in each mode of the tensor iteratively. MPCA has been applied to face recognition, gait recognition, etc. MPCA is further extended to uncorrelated MPCA, non-negative MPCA and robust MPCA.

Higher order

N-way principal component analysis may be performed with models such as Tucker decomposition, PARAFAC, multiple factor analysis, co-inertia analysis, STATIS, and DISTATIS.

Robustness - Weighted PCA

While PCA finds the mathematically optimal method (as in minimizing the squared error), it is sensitive to outliers in the data that produce large errors PCA tries to avoid. It therefore is common practice to remove outliers before computing PCA. However, in some contexts, outliers can be difficult to identify. For example in data mining algorithms like correlation clustering, the assignment of points to clusters and outliers is not known beforehand. A recently proposed generalization of PCA based on a Weighted PCA increases robustness by assigning different weights to data objects based on their estimated relevancy.

Software/source code

• Mathematica implements principal component analysis with the PrincipalComponents command using both covariance and correlation methods.
• In the NAG Library, principal components analysis is implemented via the g03aa routine (available in both the Fortran and the C versions of the Library).
• In the MATLAB Statistics Toolbox, the functions princomp and pca (R2012b) give the principal components, while the function pcares gives the residuals and reconstructed matrix for a low-rank PCA approximation. An example MATLAB implementation of PCA is available.
• in GNU Octave, a free software computational environment mostly compatible with MATLAB, the function princomp gives the principal component.
• in the free statistical package R, the functions princomp and prcomp can be used for principal component analysis; prcomp uses singular value decomposition which generally gives better numerical accuracy. Recently there has been an explosion in implementations of principal component analysis in various R packages. Some packages that implement PCA in R, include, but are not limited to: ade4, vegan, ExPosition, and FactoMineR
• in SAS, PROC FACTOR offers principal components analysis.
• In XLMiner, the Principal Components tab can be used for principal component analysis.^{[citation needed]}
• In Stata, the pca command provides principal components analysis.
• Cornell Spectrum Imager - An open-source toolset built on ImageJ. Enables quick easy PCA analysis for 3D datacubes.
• imDEV - Free Excel addin to calculate principal components using R package
• "ViSta: The Visual Statistics System" - a free software that provides principal components analysis, simple and multiple correspondence analysis.
• "Spectramap" - software to create a biplot using principal components analysis, correspondence analysis or spectral map analysis.
• FinMath - a .NET numerical library containing an implementation of PCA.
• The Unscrambler is a multivariate analysis software enabling Principal Component Analysis (PCA) with PCA Projection.^{[citation needed]}
• OpenCV
• NMath, a proprietary numerical library containing PCA for the .NET Framework.^{[citation needed]}
• In IDL, the principal components can be calculated using the function pcomp.^{[citation needed]}
• Weka computes principal components.
• Software for analyzing multivariate data with instant response using PCA
• Orange (software) supports PCA through its Linear Projection widget.^{[citation needed]}
• A version of PCA adapted for population genetics analysis can be found in the suite EIGENSOFT.
• PCA can also be performed by the statistical software Partek Genomics Suite.

See also

• Canonical correlation
• Correspondence analysis
• Detrended correspondence analysis
• Eigenface
• Exploratory factor analysis (Wikiversity)
• Geometric data analysis
• Factorial code
• Independent component analysis
• Kernel PCA
• Matrix decomposition
• Multilinear PCA
• Multilinear subspace learning
• Nonlinear dimensionality reduction
• Oja's rule
• Point distribution model (PCA applied to morphometry and computer vision)
• Principal component regression
• Principal component analysis (Wikibooks)
• Singular spectrum analysis
• Singular value decomposition
• Sparse PCA
• Transform coding
• Weighted least squares
• Dynamic mode decomposition
• Low-rank approximation
• CUR matrix approximation (can replace of low-rank SVD approximation)
• Non-negative matrix factorization

Notes

References

• Jackson, J.E. (1991). A User's Guide to Principal Components (Wiley).
• Jolliffe, I. T. (1986). Principal Component Analysis. Springer-Verlag. p. 487. doi:10.1007/b98835. ISBN 978-0-387-95442-4. 
• Jolliffe, I.T. (2002). Principal Component Analysis, second edition (Springer).

External links

• University of Copenhagen video by Rasmus Bro
• Stanford University video by Andrew Ng

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

• 1. 続発性（AA）アミロイドーシスの病因 pathogenesis of secondary aa amyloidosis
• 2. メンデルランダム化 mendelian randomization
• 3. QT間隔のばらつき：測定および解釈 qt dispersion measurement and interpretation
• 4. 乳房温存療法 breast conserving therapy
• 5. 原発性胆汁性肝硬変の病因 pathogenesis of primary biliary cirrhosis

English Journal

• Authentication of virgin olive oil by a novel curve resolution approach combined with visible spectroscopy.

• Ferreiro-González M1, Barbero GF2, Álvarez JA3, Ruiz A3, Palma M2, Ayuso J3.
• Food chemistry.Food Chem.2017 Apr 1;220:331-336. doi: 10.1016/j.foodchem.2016.10.015. Epub 2016 Oct 7.
• Adulteration of olive oil is not only a major economic fraud but can also have major health implications for consumers. In this study, a combination of visible spectroscopy with a novel multivariate curve resolution method (CR), principal component analysis (PCA) and linear discriminant analysis (LD
• PMID 27855908

• Geographical identification of saffron (Crocus sativus L.) by linear discriminant analysis applied to the UV-visible spectra of aqueous extracts.

• D'Archivio AA1, Maggi MA2.
• Food chemistry.Food Chem.2017 Mar 15;219:408-413. doi: 10.1016/j.foodchem.2016.09.169. Epub 2016 Sep 28.
• We attempted geographical classification of saffron using UV-visible spectroscopy, conventionally adopted for quality grading according to the ISO Normative 3632. We investigated 81 saffron samples produced in L'Aquila, Città della Pieve, Cascia, and Sardinia (Italy) and commercial products purchas
• PMID 27765245

• Analysis of human motion variation patterns using UMPCA.

• Masoud HI1, Zerehsaz Y2, Jin JJ3.
• Applied ergonomics.Appl Ergon.2017 Mar;59(Pt A):401-409. doi: 10.1016/j.apergo.2016.09.016. Epub 2016 Oct 13.
• The rapid development of motion capture technologies has greatly increased the use of human motion data in many applications. This has increased the demand to have an effective means to systematically analyze those massive data in order to understand human motion variation patterns. This paper studi
• PMID 27890152

Japanese Journal

• Determinants of Fish Productivity in Jaffna Fishing Community, Sri Lanka : A Path Analysis Model

• Ainkaranathan Saarrankan
• 龍谷大学経済学論集 52(3), 133-154, 2013-03-29
• … Descriptive statistics, correlation, principal component factor and multiple linear regression were used to analyze the primary data. …
• NAID 120005291337

• 中国吉林省における農村地域生活水準に影響を与える要因に基づく地域類型化

• 尹 元福
• 龍谷大学経済学論集 52(3), 15-31, 2013-03-29
• NAID 110009577833

• Three Groups in the 28 Joints for Rheumatoid Arthritis Synovitis - Analysis Using More than 17,000 Assessments in the KURAMA Database.

• Terao Chikashi,Hashimoto Motomu,Yamamoto Keiichi,Murakami Kosaku,Ohmura Koichiro,Nakashima Ran,Yamakawa Noriyuki,Yoshifuji Hajime,Yukawa Naoichiro,Kawabata Daisuke,Usui Takashi,Yoshitomi Hiroyuki,Furu Moritoshi,Yamada Ryo,Matsuda Fumihiko,Ito Hiromu,Fujii Takao,Mimori Tsuneyo
• PloS one 8(3), 2013-03-12
• … Correlations of joint symptoms were analyzed for swellings and tenderness using kappa coefficient and eigen vectors by principal component analysis. …
• NAID 120005244457

Related Links

• 主成分分析 (PCA: Principal Component Analysis) 1.

datB_prin00.doc 1 主成分分析 (PCA: Principal Component Analysis) Ver.4 1. はじめに 英語と数学の試験の点数をもとに 学生を成績のよい順に並べることを考えてみよう。その場 合，単純に2科目の平均点を用いる場合や，英語に0.7 ...

• Principal component analysisとは - goo Wikipedia (ウィキペディア)

Principal component analysis (PCA) is a statistical procedure that uses an orthogonal transformation to convert a set of observations of possibly correlated variables into a set of values of linearly uncorrelated variables called principal ...

Related Pictures

---

★リンクテーブル★

リンク元	「主成分」「main component」「main ingredient」
拡張検索	「principal component analysis」
関連記事	「principal」「component」

「主成分」

　　[★]

英

principal component、main component、main ingredient

「main component」

　　[★]

• 主成分

関

main ingredient、principal component

「main ingredient」

　　[★]

• 主成分

関

main component、principal component

「principal component analysis」

　　[★]

主成分分析、主成分分析法

「principal」

　　[★]

• adj.

• 主要な

• n.

• 校長

関

cardinal、chief、foremost、main、mainly、major、master、primarily、primary、principally

　 　 　 　 　 　

「component」

　　[★]

• n.

• 成分、構成成分、構成要素、コンポーネント

関

building block、composition、constituent、element、ingredient、moiety