残留磁化

WordNet

relating to or indicating a remainder; "residual quantity" (同)residuary
(often plural) a payment that is made to a performer or writer or director of a television show or commercial that is paid for every repeat showing; "he could retire on his residuals"
the extent or degree to which something is magnetized (同)magnetisation
the process that makes a substance magnetic (temporarily or permanently) (同)magnetisation, magnetic induction
the physical property of being magnetic (同)magnetisation

PrepTutorEJDIC

残りの,残留の / 残余

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2015/12/05 22:33:34」(JST)

wiki en

Remanence or remanent magnetization or residual magnetism is the magnetization left behind in a ferromagnetic material (such as iron) after an external magnetic field is removed. It is also the measure of that magnetization.^[1] Colloquially, when a magnet is "magnetized" it has remanence.^[2] The remanence of magnetic materials provides the magnetic memory in magnetic storage devices, and is used as a source of information on the past Earth's magnetic field in paleomagnetism.

The equivalent term residual magnetization is generally used in engineering applications. In transformers, electric motors and generators a large residual magnetization is not desirable (see also electrical steel) as it is an unwanted contamination, for example a magnetization remaining in an electromagnet after the current in the coil is turned off. Where it is unwanted, it can be removed by degaussing.

Sometimes the term retentivity is used for remanence measured in units of magnetic flux density.^[3]

Types of remanence

Saturation remanence

Fig. 1 A family of AC hysteresis loops for grain-oriented electrical steel (B_r denotes remanence and H_c is the coercivity).

The default definition of magnetic remanence is the magnetization remaining in zero field after a large magnetic field is applied (enough to achieve saturation).^[1] The effect of a magnetic hysteresis loop is measured using instruments such as a vibrating sample magnetometer; and the zero-field intercept is a measure of the remanence. In physics this measure is converted to an average magnetization (the total magnetic moment divided by the volume of the sample) and denoted in equations as M_r. If it must be distinguished from other kinds of remanence it is called the saturation remanence or saturation isothermal remanence (SIRM) and denoted by M_rs.

In engineering applications the residual magnetization is often measured using a B-H Analyzer, which measures the response to an AC magnetic field (as in Fig. 1). This is represented by a flux density B_r. This value of remanence is one of the most important parameters characterizing permanent magnets; it measures the strongest magnetic field they can produce. Neodymium magnets, for example, have a remanence approximately equal to 1.3 teslas.

Isothermal remanence

Often a single measure of remanence does not provide adequate information on a magnet. For example, magnetic tapes contain a large number of small magnetic particles (see magnetic storage), and these particles are not identical. Magnetic minerals in rocks may have a wide range of magnetic properties (see rock magnetism). One way to look inside these materials is to add or subtract small increments of remanence. One way of doing this is first demagnetizing the magnet in an AC field, and then applying a field H and removing it. This remanence, denoted by M_r(H), depends on the field.^[4] It is called the initial remanence^[5] or the isothermal remanent magnetization (IRM).^[6]

Another kind of IRM can be obtained by first giving the magnet a saturation remanence in one direction and then applying and removing a magnetic field in the opposite direction.^[4] This is called demagnetization remanence or DC demagnetization remanence and is denoted by symbols like M_d(H), where H is the magnitude of the field.^[7] Yet another kind of remanence can be obtained by demagnetizing the saturation remanence in an ac field. This is called AC demagnetization remanence or alternating field demagnetization remanence and is denoted by symbols like M_af(H).

If the particles are noninteracting single-domain particles with uniaxial anisotropy, there are simple linear relations between the remanences.^[4]

Anhysteretic remanence

Another kind of laboratory remanence is anhysteretic remanence or anhysteretic remanent magnetization (ARM). This is induced by exposing a magnet to a large alternating field plus a small dc bias field. The amplitude of the alternating field is gradually reduced to zero to get an anhysteretic magnetization, and then the bias field is removed to get the remanence. The anhysteretic magnetization curve is often close to an average of the two branches of the hysteresis loop,^[8] and is assumed in some models to represent the lowest-energy state for a given field.^[9] ARM has also been studied because of its similarity to the write process in some magnetic recording technology^[10] and to the acquisition of natural remanent magnetization in rocks.^[11]

Notes

^ ^a ^b Chikazumi 1997
^ Strictly speaking, it is still in the Earth's field, but that has little effect on the remanence of a hard magnet.
^ "Magnetic Tape Storage and Handling".
^ ^a ^b ^c Wohlfarth 1958
^ McCurrie & Gaunt 1966
^ Néel 1955
^ Pfeiffer 1990
^ Bozorth 1951
^ Jiles & Atherton 1986
^ Jaep 1969
^ Banerjee & Mellema 1974

References

Banerjee, S. K.; Mellema, J. P. (1974). "A new method for the determination of paleointensity from the A.R.M. properties of rocks". Earth Planet. Sci. Lett. 23 (2): 177–184. Bibcode:1974E&PSL..23..177B. doi:10.1016/0012-821X(74)90190-3.
Bozorth, Richard M. (1993) [Reissue of 1951 publication]. Ferromagnetism. AN IEEE Press Classic Reissue. Wiley-IEEE Press. ISBN 0-7803-1032-2.
Chikazumi, Sōshin (1997). Physics of Ferromagnetism. Clarendon Press. ISBN 0-19-851776-9.
Jaep, W. F. (1969). "Anhysteretic magnetization of an assembly of single-domain particles". J. Appl. Phys. 40 (3): 1297–1298. Bibcode:1969JAP....40.1297J. doi:10.1063/1.1657638.
Jiles, D. C.; Atherton, D. L. (1986). "Theory of ferromagnetic hysteresis". J. Magn Magn. Mater. 61: 48–60. Bibcode:1986JMMM...61...48J. doi:10.1016/0304-8853(86)90066-1.
McCurrie, R. A.; Gaunt, P. (1966). "The magnetic properties of platinum cobalt near the equiatomic composition part I. the experimental data". Phil. Mag. 13 (123): 567–577. Bibcode:1966PMag...13..567M. doi:10.1080/14786436608212648.
Néel, Louis (1955). "Some theoretical aspects of rock magnetism". Adv. Phys. 4 (14): 191–243. Bibcode:1955AdPhy...4..191N. doi:10.1080/00018735500101204.
Pfeiffer, H. (1990). "Determination of anisotropy field distribution in particle assemblies taking into account thermal fluctuations". Physica Status Solidi 118: 295–306. Bibcode:1990PSSAR.118..295P. doi:10.1002/pssa.2211180133.
Wohlfarth, E. P. (1958). "Relations between different modes of acquisition of the remanent magnetization of ferromagnetic particles". J. Appl. Phys. 29 (3): 595–596. Bibcode:1958JAP....29..595W. doi:10.1063/1.1723232.

External links

Coercivity and Remanence in Permanent Magnets
Magnet Man

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

1. 急性骨髄性白血病における寛解基準および残存病変のモニタリング remission criteria in acute myeloid leukemia and monitoring for residual disease
2. Incorporating residual kidney function into the dosing of intermittent hemodialysis
3. 腎不全における尿量および残存腎機能 urine output and residual kidney function in kidney failure
4. 結石除去後の残存結石片の臨床的意義 clinical significance of residual stone fragments following stone removal
5. 急性リンパ芽球性白血病における微小残存病変の検出 detection of minimal residual disease in acute lymphoblastic leukemia

English Journal

Low temperature hydrothermal synthesis, structure and magnetic properties of RECrO3 (RE = La, Pr, Nd, Sm).

Wang S1, Huang K, Hou C, Yuan L, Wu X, Lu D.
Dalton transactions (Cambridge, England : 2003).Dalton Trans.2015 Sep 16. [Epub ahead of print]
Perovskite structured rare-earth chromites (RECrO3) are an interesting family of functional materials due to their wide application in numerous areas. Various methods have been used to synthesize this family of materials; however, such methods usually need a high temperature crystallization process
PMID 26374249

BaFe12O19-chitosan Schiff-base Ag (I) complexes embedded in carbon nanotube networks for high-performance electromagnetic materials.

Zhao J1, Xie Y1, Guan D2, Hua H3, Zhong R3, Qin Y3, Fang J3, Liu H3, Chen J2.
Scientific reports.Sci Rep.2015 Jul 28;5:12544. doi: 10.1038/srep12544.
The multiwalled carbon nanotubes/BaFe12O19-chitosan (MCNTs/BF-CS) Schiff base Ag (I) complex composites were synthesized successfully by a chemical bonding method. The morphology and structures of the composites were characterized with electron microscopy, Fourier transform infrared spectroscopy and
PMID 26218269

Assembly of Maghemite Nanoparticles Into Particulate Nanosheets and Their Application in Wastewater Treatment.

Xu M, Jiao S, Liu X, Ma R, Ren J, Liu D, Pang G, Feng S.
Journal of nanoscience and nanotechnology.J Nanosci Nanotechnol.2015 Jul;15(7):5384-90.
The maghemite particulate nanosheets (MPNs) are prepared in solvothermal system by connecting the nanoparticles in two-dimension. The interconnected MPNs sustain a mesopores structure with a high accessible surface area of 164 m2/g, and have a high performance for Cr6+ adsorption. The Cr6+ removal p
PMID 26373148

Japanese Journal

Evaluation of the Material Degradation of Austenitic Stainless Steel under Pulsating Tension Stress Using Magnetic Method (Special Issue on the Asia-Pacific Symposium on Applied Electromagnetics and Mechanics (APSAEM2014))

日本AEM学会誌 = Journal of the Japan Society of Applied Electromagnetics and Mechanics 23(3), 458-463, 2015-09
NAID 40020624194

Zero-Field Magnetism of a Two-Dimensional Antiferromagnet, κ-(BEDT-TTF)<sub>2</sub>Cu[N(CN)<sub>2</sub>]Cl, Determined by Muon Spin Rotation and Magnetization Measurements