polyacid

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2015/05/24 03:37:03」(JST)

wiki en

Zinc, a typical metal, reacting with hydrochloric acid, a typical acid

An acid (from the Latin acidus/acēre meaning sour^[1]) is a chemical substance whose aqueous solutions are characterized by a sour taste, the ability to turn blue litmus red, and the ability to react with bases and certain metals (like calcium) to form salts. Aqueous solutions of acids have a pH of less than 7. Non-aqueous acids are usually formed when an anion reacts with one or more positively charged hydrogen cations. A lower pH means a higher acidity, and thus a higher concentration of positive hydrogen ions in the solution. Chemicals or substances having the property of an acid are said to be acidic.

There are three common definitions for acids: the Arrhenius definition, the Brønsted-Lowry definition, and the Lewis definition. The Arrhenius definition defines acids as substances which increase the concentration of hydrogen ions (H⁺), or more accurately, hydronium ions (H₃O⁺), when dissolved in water. The Brønsted-Lowry definition is an expansion: an acid is a substance which can act as a proton donor. By this definition, any compound which can easily be deprotonated can be considered an acid. Examples include alcohols and amines which contain O-H or N-H fragments. A Lewis acid is a substance that can accept a pair of electrons to form a covalent bond. Examples of Lewis acids include all metal cations, and electron-deficient molecules such as boron trifluoride and aluminium trichloride.

Common examples of acids include hydrochloric acid (a solution of hydrogen chloride which is found in gastric acid in the stomach and activates digestive enzymes), acetic acid (vinegar is a dilute solution of this liquid), sulfuric acid (used in car batteries), and tartaric acid (a solid used in baking). As these examples show, acids can be solutions or pure substances, and can be derived from solids, liquids, or gases. Strong acids and some concentrated weak acids are corrosive, but there are exceptions such as carboranes and boric acid.

1 Definitions and concepts
- 1.1 Arrhenius acids
- 1.2 Brønsted-Lowry acids
- 1.3 Lewis acids
2 Dissociation and equilibrium
3 Nomenclature
4 Acid strength
5 Chemical characteristics
- 5.1 Monoprotic acids
- 5.2 Polyprotic acids
- 5.3 Neutralization
- 5.4 Weak acid–weak base equilibrium
6 Applications of acids
- 6.1 Acid catalysis
7 Biological occurrence
8 Common acids
- 8.1 Mineral acids (inorganic acids)
- 8.2 Sulfonic acids
- 8.3 Carboxylic acids
- 8.4 Halogenated carboxylic acids
- 8.5 Vinylogous carboxylic acids
- 8.6 Nucleic acids
9 References
10 External links

Definitions and concepts

Modern definitions are concerned with the fundamental chemical reactions common to all acids.

Most acids encountered in everyday life are aqueous solutions, or can be dissolved in water, so the Arrhenius and Brønsted-Lowry definitions are the most relevant.

The Brønsted-Lowry definition is the most widely used definition; unless otherwise specified, acid-base reactions are assumed to involve the transfer of a proton (H⁺) from an acid to a base.

Hydronium ions are acids according to all three definitions. Interestingly, although alcohols and amines can be Brønsted-Lowry acids, they can also function as Lewis bases due to the lone pairs of electrons on their oxygen and nitrogen atoms.

Arrhenius acids

Svante Arrhenius

The Swedish chemist Svante Arrhenius attributed the properties of acidity to hydrogen ions (H⁺) or protons in 1884. An Arrhenius acid is a substance that, when added to water, increases the concentration of H⁺ ions in the water. Note that chemists often write H⁺(aq) and refer to the hydrogen ion when describing acid-base reactions but the free hydrogen nucleus, a proton, does not exist alone in water, it exists as the hydronium ion, H₃O⁺. Thus, an Arrhenius acid can also be described as a substance that increases the concentration of hydronium ions when added to water. This definition stems from the equilibrium dissociation of water into hydronium and hydroxide (OH⁻) ions:^[2]

H₂O_(l) + H₂O_(l) H₃O⁺_(aq) + OH⁻_(aq)

In pure water the majority of molecules are H₂O, but the molecules are constantly dissociating and re-associating, and at any time a small number of the molecules are hydronium and an equal number are hydroxide. Because the numbers are equal, pure water is neutral (not acidic or basic).

An Arrhenius base, on the other hand, is a substance which increases the concentration of hydroxide ions when dissolved in water, hence decreasing the concentration of hydronium.

The constant association and disassociation of H₂O molecules forms an equilibrium in which any increase in the concentration of hydronium is accompanied by a decrease in the concentration of hydroxide, thus an Arrhenius acid could also be said to be one that decreases hydroxide concentration, with an Arrhenius base increasing it.

In an acid, the concentration of hydronium ions is greater than 10⁻⁷ moles per liter. Since pH is defined as the negative logarithm of the concentration of hydronium ions, acids thus have a pH of less than 7.

Brønsted-Lowry acids

Acetic acid, a weak acid, donates a proton (hydrogen ion, highlighted in green) to water in an equilibrium reaction to give the acetate ion and the hydronium ion. Red: oxygen, black: carbon, white: hydrogen.

While the Arrhenius concept is useful for describing many reactions, it is also quite limited in its scope. In 1923 chemists Johannes Nicolaus Brønsted and Thomas Martin Lowry independently recognized that acid-base reactions involve the transfer of a proton. A Brønsted-Lowry acid (or simply Brønsted acid) is a species that donates a proton to a Brønsted-Lowry base.^[2] Brønsted-Lowry acid-base theory has several advantages over Arrhenius theory. Consider the following reactions of acetic acid (CH₃COOH), the organic acid that gives vinegar its characteristic taste:

CH
3COOH + H
2O CH
3COO−
+ H
3O+

CH
3COOH + NH
3 CH
3COO−
+ NH+
4

Both theories easily describe the first reaction: CH₃COOH acts as an Arrhenius acid because it acts as a source of H₃O⁺ when dissolved in water, and it acts as a Brønsted acid by donating a proton to water. In the second example CH₃COOH undergoes the same transformation, in this case donating a proton to ammonia (NH₃), but cannot be described using the Arrhenius definition of an acid because the reaction does not produce hydronium.

Brønsted-Lowry theory can also be used to describe molecular compounds, whereas Arrhenius acids must be ionic compounds. Hydrogen chloride (HCl) and ammonia combine under several different conditions to form ammonium chloride, NH₄Cl. In aqueous solution HCl behaves as hydrochloric acid and exists as hydronium and chloride ions. The following reactions illustrate the limitations of Arrhenius's definition:

H₃O⁺_(aq) + Cl⁻_(aq) + NH₃ → Cl⁻_(aq) + NH₄⁺_(aq) + H₂O
HCl_(benzene) + NH_3(benzene) → NH₄Cl_(s)
HCl_(g) + NH_3(g) → NH₄Cl_(s)

As with the acetic acid reactions, both definitions work for the first example, where water is the solvent and hydronium ion is formed by the HCl solute. The next two reactions do not involve the formation of ions but are still proton transfer reactions. In the second reaction hydrogen chloride and ammonia (dissolved in benzene) react to form solid ammonium chloride in a benzene solvent and in the third gaseous HCl and NH₃ combine to form the solid.

Lewis acids

A third concept was proposed in 1923 by Gilbert N. Lewis which includes reactions with acid-base characteristics that do not involve a proton transfer. A Lewis acid is a species that accepts a pair of electrons from another species; in other words, it is an electron pair acceptor.^[2] Brønsted acid-base reactions are proton transfer reactions while Lewis acid-base reactions are electron pair transfers. All Brønsted acids are also Lewis acids, but not all Lewis acids are Brønsted acids. Contrast how the following reactions are described in terms of acid-base chemistry.

In the first reaction a fluoride ion, F⁻, gives up an electron pair to boron trifluoride to form the product tetrafluoroborate. Fluoride "loses" a pair of valence electrons because the electrons shared in the B—F bond are located in the region of space between the two atomic nuclei and are therefore more distant from the fluoride nucleus than they are in the lone fluoride ion. BF₃ is a Lewis acid because it accepts the electron pair from fluoride. This reaction cannot be described in terms of Brønsted theory because there is no proton transfer. The second reaction can be described using either theory. A proton is transferred from an unspecified Brønsted acid to ammonia, a Brønsted base; alternatively, ammonia acts as a Lewis base and transfers a lone pair of electrons to form a bond with a hydrogen ion. The species that gains the electron pair is the Lewis acid; for example, the oxygen atom in H₃O⁺ gains a pair of electrons when one of the H—O bonds is broken and the electrons shared in the bond become localized on oxygen. Depending on the context, a Lewis acid may also be described as an oxidizer or an electrophile.

Dissociation and equilibrium

Reactions of acids are often generalized in the form HA H⁺ + A⁻, where HA represents the acid and A⁻ is the conjugate base. Acid-base conjugate pairs differ by one proton, and can be interconverted by the addition or removal of a proton (protonation and deprotonation, respectively). Note that the acid can be the charged species and the conjugate base can be neutral in which case the generalized reaction scheme could be written as HA⁺ H⁺ + A. In solution there exists an equilibrium between the acid and its conjugate base. The equilibrium constant K is an expression of the equilibrium concentrations of the molecules or the ions in solution. Brackets indicate concentration, such that [H₂O] means the concentration of H₂O. The acid dissociation constant K_a is generally used in the context of acid-base reactions. The numerical value of K_a is equal to the product of the concentrations of the products divided by the concentration of the reactants, where the reactant is the acid (HA) and the products are the conjugate base and H⁺.

The stronger of two acids will have a higher K_a than the weaker acid; the ratio of hydrogen ions to acid will be higher for the stronger acid as the stronger acid has a greater tendency to lose its proton. Because the range of possible values for K_a spans many orders of magnitude, a more manageable constant, pK_a is more frequently used, where pK_a = -log₁₀ K_a. Stronger acids have a smaller pK_a than weaker acids. Experimentally determined pK_a at 25 °C in aqueous solution are often quoted in textbooks and reference material.

Nomenclature

In the classical naming system, acids are named according to their anions. That ionic suffix is dropped and replaced with a new suffix (and sometimes prefix), according to the table below. For example, HCl has chloride as its anion, so the -ide suffix makes it take the form hydrochloric acid. In the IUPAC naming system, "aqueous" is simply added to the name of the ionic compound. Thus, for hydrogen chloride, the IUPAC name would be aqueous hydrogen chloride. The prefix "hydro-" is added only if the acid is made up of just hydrogen and one other element.

Classical naming system:

Anion prefix	Anion suffix	Acid prefix	Acid suffix	Example
per	ate	per	ic acid	perchloric acid (HClO₄)
	ate		ic acid	chloric acid (HClO₃)
	ite		ous acid	chlorous acid (HClO₂)
hypo	ite	hypo	ous acid	hypochlorous acid (HClO)
	ide	hydro	ic acid	hydrochloric acid (HCl)

Acid strength

The strength of an acid refers to its ability or tendency to lose a proton. A strong acid is one that completely dissociates in water; in other words, one mole of a strong acid HA dissolves in water yielding one mole of H⁺ and one mole of the conjugate base, A⁻, and none of the protonated acid HA. In contrast, a weak acid only partially dissociates and at equilibrium both the acid and the conjugate base are in solution. Examples of strong acids are hydrochloric acid (HCl), hydroiodic acid (HI), hydrobromic acid (HBr), perchloric acid (HClO₄), nitric acid (HNO₃) and sulfuric acid (H₂SO₄). In water each of these essentially ionizes 100%. The stronger an acid is, the more easily it loses a proton, H⁺. Two key factors that contribute to the ease of deprotonation are the polarity of the H—A bond and the size of atom A, which determines the strength of the H—A bond. Acid strengths are also often discussed in terms of the stability of the conjugate base.

Stronger acids have a larger K_a and a more negative pK_a than weaker acids.

Sulfonic acids, which are organic oxyacids, are a class of strong acids. A common example is toluenesulfonic acid (tosylic acid). Unlike sulfuric acid itself, sulfonic acids can be solids. In fact, polystyrene functionalized into polystyrene sulfonate is a solid strongly acidic plastic that is filterable.

Superacids are acids stronger than 100% sulfuric acid. Examples of superacids are fluoroantimonic acid, magic acid and perchloric acid. Superacids can permanently protonate water to give ionic, crystalline hydronium "salts". They can also quantitatively stabilize carbocations.

While K_a measures the strength of an acid compound, the strength of an aqueous acid solution is measured by pH, which is an indication of the concentration of hydronium in the solution. The pH of a simple solution of an acid compound in water is determined by the dilution of the compound and the compound's K_a.

Chemical characteristics

Monoprotic acids

Monoprotic acids are those acids that are able to donate one proton per molecule during the process of dissociation (sometimes called ionization) as shown below (symbolized by HA):

HA_(aq) + H₂O_(l) H₃O⁺_(aq) + A⁻_(aq) K_a

Common examples of monoprotic acids in mineral acids include hydrochloric acid (HCl) and nitric acid (HNO₃). On the other hand, for organic acids the term mainly indicates the presence of one carboxylic acid group and sometimes these acids are known as monocarboxylic acid. Examples in organic acids include formic acid (HCOOH), acetic acid (CH₃COOH) and benzoic acid (C₆H₅COOH).

Polyprotic acids

Polyprotic acids, also known as polybasic acids, are able to donate more than one proton per acid molecule, in contrast to monoprotic acids that only donate one proton per molecule. Specific types of polyprotic acids have more specific names, such as diprotic acid (two potential protons to donate) and triprotic acid (three potential protons to donate).

A diprotic acid (here symbolized by H₂A) can undergo one or two dissociations depending on the pH. Each dissociation has its own dissociation constant, K_a1 and K_a2.

H₂A_(aq) + H₂O_(l) H₃O⁺_(aq) + HA⁻_(aq) K_a1

HA⁻_(aq) + H₂O_(l) H₃O⁺_(aq) + A²⁻_(aq) K_a2

The first dissociation constant is typically greater than the second; i.e., K_a1 > K_a2. For example, sulfuric acid (H₂SO₄) can donate one proton to form the bisulfate anion (HSO₄⁻), for which K_a1 is very large; then it can donate a second proton to form the sulfate anion (SO₄²⁻), wherein the K_a2 is intermediate strength. The large K_a1 for the first dissociation makes sulfuric a strong acid. In a similar manner, the weak unstable carbonic acid (H₂CO₃) can lose one proton to form bicarbonate anion (HCO₃⁻) and lose a second to form carbonate anion (CO₃²⁻). Both K_a values are small, but K_a1 > K_a2 .

A triprotic acid (H₃A) can undergo one, two, or three dissociations and has three dissociation constants, where K_a1 > K_a2 > K_a3.

H₃A_(aq) + H₂O_(l) H₃O⁺_(aq) + H₂A⁻_(aq) K_a1

H₂A⁻_(aq) + H₂O_(l) H₃O⁺_(aq) + HA²⁻_(aq) K_a2

HA²⁻_(aq) + H₂O_(l) H₃O⁺_(aq) + A³⁻_(aq) K_a3

An inorganic example of a triprotic acid is orthophosphoric acid (H₃PO₄), usually just called phosphoric acid. All three protons can be successively lost to yield H₂PO₄⁻, then HPO₄²⁻, and finally PO₄³⁻, the orthophosphate ion, usually just called phosphate. Even though the positions of the three protons on the original phosphoric acid molecule are equivalent, the successive K_a values differ since it is energetically less favorable to lose a proton if the conjugate base is more negatively charged. An organic example of a triprotic acid is citric acid, which can successively lose three protons to finally form the citrate ion.

Although the subsequent loss of each hydrogen ion is less favorable, all of the conjugate bases are present in solution. The fractional concentration, α (alpha), for each species can be calculated. For example, a generic diprotic acid will generate 3 species in solution: H₂A, HA⁻, and A²⁻. The fractional concentrations can be calculated as below when given either the pH (which can be converted to the [H⁺]) or the concentrations of the acid with all its conjugate bases:

\alpha_{H_2 A}={{[H^+]^2} \over {[H^+]^2 + [H^+]K_1 + K_1 K_2}}= {{[H_2 A]} \over {[H_2 A]+[HA^-]+[A^{2-} ]}}

\alpha_{HA^- }={{[H^+]K_1} \over {[H^+]^2 + [H^+]K_1 + K_1 K_2}}= {{[HA^-]} \over {[H_2 A]+[HA^-]+[A^{2-} ]}}

\alpha_{A^{2-}}={{K_1 K_2} \over {[H^+]^2 + [H^+]K_1 + K_1 K_2}}= {{[A^{2-} ]} \over {[H_2 A]+[HA^-]+[A^{2-} ]}}

A plot of these fractional concentrations against pH, for given K₁ and K₂, is known as a Bjerrum plot. A pattern is observed in the above equations and can be expanded to the general n -protic acid that has been deprotonated i -times:

\alpha_{H_{n-i} A^{i-} }= {{[H^+ ]^{n-i} \displaystyle \prod_{j=0}^{i}K_j} \over { \displaystyle \sum_{i=0}^n \Big[ [H^+ ]^{n-i} \displaystyle \prod_{j=0}^{i}K_j} \Big] }

where K₀ = 1 and the other K-terms are the dissociation constants for the acid.

Neutralization

Hydrochloric acid (in beaker) reacting with ammonia fumes to produce ammonium chloride (white smoke).

Neutralization is the reaction between an acid and a base, producing a salt and neutralized base; for example, hydrochloric acid and sodium hydroxide form sodium chloride and water:

HCl_(aq) + NaOH_(aq) → H₂O_(l) + NaCl_(aq)

Neutralization is the basis of titration, where a pH indicator shows equivalence point when the equivalent number of moles of a base have been added to an acid. It is often wrongly assumed that neutralization should result in a solution with pH 7.0, which is only the case with similar acid and base strengths during a reaction.

Neutralization with a base weaker than the acid results in a weakly acidic salt. An example is the weakly acidic ammonium chloride, which is produced from the strong acid hydrogen chloride and the weak base ammonia. Conversely, neutralizing a weak acid with a strong base gives a weakly basic salt, e.g. sodium fluoride from hydrogen fluoride and sodium hydroxide.

Weak acid–weak base equilibrium

In order for a protonated acid to lose a proton, the pH of the system must rise above the pK_a of the acid. The decreased concentration of H⁺ in that basic solution shifts the equilibrium towards the conjugate base form (the deprotonated form of the acid). In lower-pH (more acidic) solutions, there is a high enough H⁺ concentration in the solution to cause the acid to remain in its protonated form.

Solutions of weak acids and salts of their conjugate bases form buffer solutions.

Applications of acids

There are numerous uses for acids. Acids are often used to remove rust and other corrosion from metals in a process known as pickling. They may be used as an electrolyte in a wet cell battery, such as sulfuric acid in a car battery.

Strong acids, sulfuric acid in particular, are widely used in mineral processing. For example, phosphate minerals react with sulfuric acid to produce phosphoric acid for the production of phosphate fertilizers, and zinc is produced by dissolving zinc oxide into sulfuric acid, purifying the solution and electrowinning.

In the chemical industry, acids react in neutralization reactions to produce salts. For example, nitric acid reacts with ammonia to produce ammonium nitrate, a fertilizer. Additionally, carboxylic acids can be esterified with alcohols, to produce esters.

Acids are used as additives to drinks and foods, as they alter their taste and serve as preservatives. Phosphoric acid, for example, is a component of cola drinks. Acetic acid is used in day-to-day life as vinegar. Carbonic acid is an important part of some cola drinks and soda. Citric acid is used as a preservative in sauces and pickles.

Tartaric acid is an important component of some commonly used foods like unripened mangoes and tamarind. Natural fruits and vegetables also contain acids. Citric acid is present in oranges, lemon and other citrus fruits. Oxalic acid is present in tomatoes, spinach, and especially in carambola and rhubarb; rhubarb leaves and unripe carambolas are toxic because of high concentrations of oxalic acid.

Ascorbic acid (Vitamin C) is an essential vitamin for the human body and is present in such foods as amla (Indian gooseberry), lemon, citrus fruits, and guava.

Certain acids are used as drugs. Acetylsalicylic acid (Aspirin) is used as a pain killer and for bringing down fevers.

Acids play important roles in the human body. The hydrochloric acid present in the stomach aids in digestion by breaking down large and complex food molecules. Amino acids are required for synthesis of proteins required for growth and repair of body tissues. Fatty acids are also required for growth and repair of body tissues. Nucleic acids are important for the manufacturing of DNA and RNA and transmitting of traits to offspring through genes. Carbonic acid is important for maintenance of pH equilibrium in the body.

Acid catalysis

Acids are used as catalysts in industrial and organic chemistry; for example, sulfuric acid is used in very large quantities in the alkylation process to produce gasoline. Strong acids, such as sulfuric, phosphoric and hydrochloric acids also effect dehydration and condensation reactions. In biochemistry, many enzymes employ acid catalysis.^[3]

Biological occurrence

Basic structure of an amino acid.

Many biologically important molecules are acids. Nucleic acids, which contain acidic phosphate groups, include DNA and RNA. Nucleic acids contain the genetic code that determines many of an organism's characteristics, and is passed from parents to offspring. DNA contains the chemical blueprint for the synthesis of proteins which are made up of amino acid subunits. Cell membranes contain fatty acid esters such as phospholipids.

An α-amino acid has a central carbon (the α or alpha carbon) which is covalently bonded to a carboxyl group (thus they are carboxylic acids), an amino group, a hydrogen atom and a variable group. The variable group, also called the R group or side chain, determines the identity and many of the properties of a specific amino acid. In glycine, the simplest amino acid, the R group is a hydrogen atom, but in all other amino acids it is contains one or more carbon atoms bonded to hydrogens, and may contain other elements such as sulfur, oxygen or nitrogen. With the exception of glycine, naturally occurring amino acids are chiral and almost invariably occur in the L-configuration. Peptidoglycan, found in some bacterial cell walls contains some D-amino acids. At physiological pH, typically around 7, free amino acids exist in a charged form, where the acidic carboxyl group (-COOH) loses a proton (-COO⁻) and the basic amine group (-NH₂) gains a proton (-NH₃⁺). The entire molecule has a net neutral charge and is a zwitterion, with the exception of amino acids with basic or acidic side chains. Aspartic acid, for example, possesses one protonated amine and two deprotonated carboxyl groups, for a net charge of −1 at physiological pH.

Fatty acids and fatty acid derivatives are another group of carboxylic acids that play a significant role in biology. These contain long hydrocarbon chains and a carboxylic acid group on one end. The cell membrane of nearly all organisms is primarily made up of a phospholipid bilayer, a micelle of hydrophobic fatty acid esters with polar, hydrophilic phosphate "head" groups. Membranes contain additional components, some of which can participate in acid-base reactions.

In humans and many other animals, hydrochloric acid is a part of the gastric acid secreted within the stomach to help hydrolyze proteins and polysaccharides, as well as converting the inactive pro-enzyme, pepsinogen into the enzyme, pepsin. Some organisms produce acids for defense; for example, ants produce formic acid.

Acid-base equilibrium plays a critical role in regulating mammalian breathing. Oxygen gas (O₂) drives cellular respiration, the process by which animals release the chemical potential energy stored in food, producing carbon dioxide (CO₂) as a byproduct. Oxygen and carbon dioxide are exchanged in the lungs, and the body responds to changing energy demands by adjusting the rate of ventilation. For example, during periods of exertion the body rapidly breaks down stored carbohydrates and fat, releasing CO₂ into the blood stream. In aqueous solutions such as blood CO₂ exists in equilibrium with carbonic acid and bicarbonate ion.

CO₂ + H₂O H₂CO₃ H⁺ + HCO₃⁻

It is the decrease in pH that signals the brain to breathe faster and deeper, expelling the excess CO₂ and resupplying the cells with O₂.

Aspirin (acetylsalicylic acid) is a carboxylic acid.

Cell membranes are generally impermeable to charged or large, polar molecules because of the lipophilic fatty acyl chains comprising their interior. Many biologically important molecules, including a number of pharmaceutical agents, are organic weak acids which can cross the membrane in their protonated, uncharged form but not in their charged form (i.e. as the conjugate base). For this reason the activity of many drugs can be enhanced or inhibited by the use of antacids or acidic foods. The charged form, however, is often more soluble in blood and cytosol, both aqueous environments. When the extracellular environment is more acidic than the neutral pH within the cell, certain acids will exist in their neutral form and will be membrane soluble, allowing them to cross the phospholipid bilayer. Acids that lose a proton at the intracellular pH will exist in their soluble, charged form and are thus able to diffuse through the cytosol to their target. Ibuprofen, aspirin and penicillin are examples of drugs that are weak acids.

Common acids

Mineral acids (inorganic acids)

Hydrogen halides and their solutions: hydrofluoric acid (HF), hydrochloric acid (HCl), hydrobromic acid (HBr), hydroiodic acid (HI)
Halogen oxoacids: hypochlorous acid (HClO), chlorous acid (HClO₂), chloric acid (HClO₃), perchloric acid (HClO₄), and corresponding compounds for bromine and iodine
Sulfuric acid (H₂SO₄)
Fluorosulfuric acid (HSO₃F)
Nitric acid (HNO₃)
Phosphoric acid (H₃PO₄)
Fluoroantimonic acid (HSbF₆)
Fluoroboric acid (HBF₄)
Hexafluorophosphoric acid (HPF₆)
Chromic acid (H₂CrO₄)
Boric acid (H₃BO₃)

Sulfonic acids

A sulfonic acid has the general formula RS(=O)₂–OH, where R is an organic radical.

Methanesulfonic acid (or mesylic acid, CH₃SO₃H)
Ethanesulfonic acid (or esylic acid, CH₃CH₂SO₃H)
Benzenesulfonic acid (or besylic acid, C₆H₅SO₃H)
p-Toluenesulfonic acid (or tosylic acid, CH₃C₆H₄SO₃H)
Trifluoromethanesulfonic acid (or triflic acid, CF₃SO₃H)
Polystyrene sulfonic acid (sulfonated polystyrene, [CH₂CH(C₆H₄)SO₃H]_n)

Carboxylic acids

A carboxylic acid has the general formula R-C(O)OH, where R is an organic radical. The carboxyl group -C(O)OH contains a carbonyl group, C=O, and a hydroxyl group, O-H.

Acetic acid (CH₃COOH)
Citric acid (C₆H₈O₇)
Formic acid (HCOOH)
Gluconic acid HOCH₂-(CHOH)₄-COOH
Lactic acid (CH₃-CHOH-COOH)
Oxalic acid (HOOC-COOH)
Tartaric acid (HOOC-CHOH-CHOH-COOH)

Halogenated carboxylic acids

Halogenation at alpha position increases acid strength, so that the following acids are all stronger than acetic acid.

Fluoroacetic acid
Trifluoroacetic acid
Chloroacetic acid
Dichloroacetic acid
Trichloroacetic acid

Vinylogous carboxylic acids

Normal carboxylic acids are the direct union of a carbonyl group and a hydroxyl group. In vinylogous carboxylic acids, a carbon-carbon double bond separates the carbonyl and hydroxyl groups.

Ascorbic acid

Nucleic acids

Deoxyribonucleic acid (DNA)
Ribonucleic acid (RNA)

References

^ Merriam-Webster's Online Dictionary: acid
^ ^a ^b ^c Ebbing, D.D., & Gammon, S. D. (2005). General chemistry (8th ed.). Boston, MA: Houghton Mifflin. ISBN 0-618-51177-6
^ Voet, Judith G.; Voet, Donald (2004). Biochemistry. New York: J. Wiley & Sons. pp. 496–500. ISBN 978-0-471-19350-0.

Listing of strengths of common acids and bases
IUPAC Gold Book - acid
Zumdahl, Chemistry, 4th Edition.
Ebbing, D.D., & Gammon, S. D. (2005). General chemistry (8th ed.). Boston, MA: Houghton Mifflin. ISBN 0-618-51177-6
Pavia, D.L., Lampman, G.M., & Kriz, G.S. (2004). Organic chemistry volume 1: Organic chemistry 351. Mason, OH: Cenage Learning. ISBN 0-7593-4727-1

External links

Science Aid: Acids and Bases Information for High School students
Curtipot: Acid-Base equilibria diagrams, pH calculation and titration curves simulation and analysis – freeware
A summary of the Properties of Acids for the beginning chemistry student
The UN ECE Convention on Long-Range Transboundary Air Pollution
Chem 106 – Acidity Concepts

English Journal

Sealants for preventing dental decay in the permanent teeth.

Ahovuo-Saloranta A, Forss H, Walsh T, Hiiri A, Nordblad A, Mäkelä M, Worthington HV.SourceFinnish Office for Health Technology Assessment / FinOHTA, National Institute for Health and Welfare / THL, Finn-Medi 3, Biokatu 10, Tampere, Finland, FI-33520.
Cochrane database of systematic reviews (Online).Cochrane Database Syst Rev.2013 Mar 28;3:CD001830. doi: 10.1002/14651858.CD001830.pub4.
BACKGROUND: Dental sealants were introduced in the 1960s to help prevent dental caries in the pits and fissures of mainly the occlusal tooth surfaces. Sealants act to prevent the growth of bacteria that can lead to dental decay. There is evidence to suggest that fissure sealants are effective in pre
PMID 23543512

Effect of Sequence on the Ionization Behavior of a Series of Amphiphilic Polypeptides.

Fowler M, Siddique B, Duhamel J.SourceInstitute of Polymer Research, Waterloo Institute of Nanotechnology, Department of Chemistry, University of Waterloo , Waterloo, Ontario N2L 3G1, Canada.
Langmuir : the ACS journal of surfaces and colloids.Langmuir.2013 Mar 27. [Epub ahead of print]
The behavior of five polypeptides made of hydrophilic and pH-responsive aspartic acid (Asp) and hydrophobic phenylalanine (Phe), which had been prepared by stitching together short well-defined sequences of Asp and Phe, was studied as a function of pH. The effect of pH on these polypeptides referred
PMID 23484851

Development of a ratiometric time-resolved luminescence sensor for pH based on lanthanide complexes.

Liu M, Ye Z, Xin C, Yuan J.SourceState Key Laboratory of Fine Chemicals, School of Chemistry, Dalian University of Technology, Dalian 116024, China.
Analytica chimica acta.Anal Chim Acta.2013 Jan 25;761:149-56. doi: 10.1016/j.aca.2012.11.025. Epub 2012 Nov 23.
Time-resolved luminescence bioassay technique using lanthanide complexes as luminescent probes/sensors has shown great utilities in clinical diagnostics and biotechnology discoveries. In this work, a novel terpyridine polyacid derivative that can form highly stable complexes with lanthanide ions in
PMID 23312326

Japanese Journal

Evaluation of the caries-preventive effect of three orthodontic band cements in terms of fluoride release, retentiveness, and microleakage

, ,
Dental Materials Journal 32(3), 376-380, 2013
… This in vitro study was undertaken to evaluate the caries-preventive effect of three orthodontic band cements (a dual-curing resinmodified glass ionomer cement [RMGIC] and two light-curing polyacid-modified composite resin [compomer] cements) in terms of fluoride release, retentiveness, and microleakage after thermocycling. …
NAID 130003371077

Topical fluoride application is able to reduce acid susceptibility of restorative materials

, , , ,
Dental materials journal 31(3), 433-442, 2012-05-01
… Four restorative materials were investigated in this study: 2 composite resins (Tetric EvoCeram and Filtek Silorane), a polyacid-modified resin composite (Dyract Extra), and a conventional glass-ionomer cement (Ketac Fil Plus). … The results indicate high-concentrated AmF solution at native pH was effective in inhibiting erosion in the conventional glass-ionomer cement and polyacid-modified resin composite. …
NAID 10030315341

Effectiveness of surface protection for glass-ionomer, resin-modified glass-ionomer and polyacid-modified composite resins

, , ,
Dental materials journal 28(1), 96-101, 2009-01
… The purpose of this study was to evaluate the effectiveness of several surface protectors for a glass-ionomer, a resinmodified glass-ionomer, and a polyacid-modified resin cement by determining dye uptake spectrophotometrically. …
NAID 110007041988

Related Pictures

[1] Merriam-Webster's Online Dictionary: acid

[Ebbing-2] Ebbing, D.D., & Gammon, S. D. (2005). General chemistry (8th ed.). Boston, MA: Houghton Mifflin. ISBN 0-618-51177-6

[Voet_acid_cat-3] Voet, Judith G.; Voet, Donald (2004). Biochemistry. New York: J. Wiley & Sons. pp. 496–500. ISBN 978-0-471-19350-0.

匿名

検索

案内

案内