elliptic

• 楕円形の

関

elliptical

　 　 　

WordNet

1. (of a leaf shape) in the form of an ellipse
2. characterized by extreme economy of expression or omission of superfluous elements; "the dialogue is elliptic and full of dark hints"; "the explanation was concise, even elliptical to the verge of obscurity"- H.O.Taylor (同)elliptical
3. (mathematics) a non-Euclidean geometry that regards space as like a sphere and a line as like a great circle; "Bernhard Riemann pioneered elliptic geometry" (同)Riemannian geometry
4. a simple leaf shaped like an ellipse

PrepTutorEJDIC

1. =elliptical
2. 長円の / 省略の

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2016/04/07 15:52:58」(JST)

wiki en

[Wiki en表示]

This article is about the geometric figure. For other uses, see Ellipse (disambiguation).

"Elliptical" redirects here. For the exercise machine, see Elliptical trainer.

An ellipse obtained as the intersection of a cone with an inclined plane.

In mathematics, an ellipse is a curve on a plane that surrounds two focal points such that the sum of the distances to the two focal points is constant for every point on the curve. As such, it is a generalization of a circle, which is a special type of an ellipse that has both focal points at the same location. The shape of an ellipse (how 'elongated' it is) is represented by its eccentricity, which for an ellipse can be any number from 0 (the limiting case of a circle) to arbitrarily close to but less than 1.

Ellipses are the closed type of conic section: a plane curve that results from the intersection of a cone by a plane. (See figure to the right.) Ellipses have many similarities with the other two forms of conic sections: the parabolas and the hyperbolas, both of which are open and unbounded. The cross section of a cylinder is an ellipse, unless the section is parallel to the axis of the cylinder.

Analytically, an ellipse can also be defined as the set of points such that the ratio of the distance of each point on the curve from a given point (called a focus or focal point) to the distance from that same point on the curve to a given line (called the directrix) is a constant, called the eccentricity of the ellipse.

Ellipses are common in physics, astronomy and engineering. For example, the orbit of each planet in the solar system is approximately an ellipse with the barycenter of the planet-Sun pair at one of the focal points. The same is true for moons orbiting planets and all other systems having two astronomical bodies. The shape of planets and stars are often well described by ellipsoids. Ellipses also arise as images of a circle under parallel projection and the bounded cases of perspective projection, which are simply intersections of the projective cone with the plane of projection. It is also the simplest Lissajous figure, formed when the horizontal and vertical motions are sinusoids with the same frequency. A similar effect leads to elliptical polarization of light in optics.

The name, ἔλλειψις (élleipsis, "omission"), was given by Apollonius of Perga in his Conics, emphasizing the connection of the curve with "application of areas".

Elements of an ellipse

See also: Features of conic sections

The ellipse and some of its mathematical properties.

The distance traveled from one focus to another, via some point on the ellipse, is the same regardless of the point selected.

Ellipses have two perpendicular axes about which the ellipse is symmetric. These axes intersect at the center of the ellipse due to this symmetry. The larger of these two axes, which corresponds to the larger distance between antipodal points on the ellipse, is called the major axis (in the figure to the right it is represented by the line segment between the point labeled −a and the point labeled a). The smaller of these two axes, and the smaller distance between antipodal points on the ellipse, is called the minor axis. (in the figure to the right it is represented by the line segment between the point labeled −b to the point labeled b).

The semi-major axis (denoted by a in the figure) and the semi-minor axis (denoted by b in the figure) are one half of the major and minor axes, respectively. These are sometimes called (especially in technical fields) the major and minor semi-axes, the major and minor semiaxes, or major radius and minor radius.

The four points where these axes cross the ellipse are the vertices and are marked as a, −a, b, and −b. In addition to being at the largest and smallest distance from the center, these points are where the curvature of the ellipse is maximum and minimum.

The two foci (the term focal points is also used) of an ellipse are two special points F₁ and F₂ on the ellipse's major axis that are equidistant from the center point. The sum of the distances from any point P on the ellipse to those two foci is constant and equal to the major axis (PF₁ + PF₂ = 2a) (in the figure to the right this corresponds to the sum of the two green lines equaling the length of the major axis that goes from −a to a).

The distance to the focal point from the center of the ellipse is sometimes called the linear eccentricity, f, of the ellipse. Here it is denoted by f, but it is often denoted by c. Due to the Pythagorean theorem and the definition of the ellipse explained in the previous paragraph: f² = a² −b².

A second equivalent method of constructing an ellipse using a directrix is shown on the plot as the three blue lines. (See the Directrix section of this article for more information about this method). The dashed blue line is the directrix of the ellipse shown.

The eccentricity of an ellipse, usually denoted by ε or e, is the ratio of the distance between the two foci, to the length of the major axis or e = 2f/2a = f/a. For an ellipse the eccentricity is between 0 and 1 (0 < e < 1). When the eccentricity is 0 the foci coincide with the center point and the figure is a circle. As the eccentricity tends toward 1, the ellipse gets a more elongated shape. It tends towards a line segment (see below) if the two foci remain a finite distance apart and a parabola if one focus is kept fixed as the other is allowed to move arbitrarily far away. The eccentricity is also equal to the ratio of the distance (such as the (blue) line PF₂) from any particular point on an ellipse to one of the foci to the perpendicular distance to the directrix from the same point (line PD), e = PF₂/PD.

Drawing ellipses

Drawing an ellipse with two pins, a loop, and a pen

Trammel of Archimedes (ellipsograph) animation

Ellipse construction applying the parallelogram method

Pins-and-string method

The characterization of an ellipse as the locus of points so that sum of the distances to the foci is constant leads to a method of drawing one using two drawing pins, a length of string, and a pencil. In this method, pins are pushed into the paper at two points, which become the ellipse's foci. A string tied at each end to the two pins and the tip of a pen pulls the loop taut to form a triangle. The tip of the pen then traces an ellipse if it is moved while keeping the string taut. Using two pegs and a rope, gardeners use this procedure to outline an elliptical flower bed—thus it is called the gardener's ellipse.

Trammel method

An ellipse can also be drawn using a ruler, a set square, and a pencil:

Draw two perpendicular lines M,N on the paper; these are the major (M) and minor (N) axes of the ellipse. Mark three points A, B, C on the ruler. A->C being the length of the semi-major axis and B->C the length of the semi-minor axis. With one hand, move the ruler on the paper, turning and sliding it so as to keep point A always on line N, and B on line M. With the other hand, keep the pencil's tip on the paper, following point C of the ruler. The tip traces out an ellipse.

The trammel of Archimedes, or ellipsograph, is a mechanical device that implements this principle. The ruler is replaced by a rod with a pencil holder (point C) at one end, and two adjustable side pins (points A and B) that slide into two perpendicular slots cut into a metal plate. The mechanism can be used with a router to cut ellipses from board material. The mechanism is also used in a toy called the "nothing grinder".

Parallelogram method

In the parallelogram method, an ellipse is constructed point by point using equally spaced points on two horizontal lines and equally spaced points on two vertical lines. It is based on Steiner's theorem on the generation of conic sections. Similar methods exist for the parabola and hyperbola.

Mathematical definitions and properties

In Euclidean geometry

Definition

In Euclidean geometry, the ellipse is usually defined as the bounded case of a conic section, or as the set of points such that the sum of the distances to two fixed points (the foci) is constant. The ellipse can also be defined as the set of points such that the distance from any point in that set to a given point in the plane (a focus) is a constant positive fraction less than 1 (the eccentricity) of the perpendicular distance of the point in the set to a given line (called the directrix). Yet another equivalent definition of the ellipse is that it is the set of points that are equidistant from one point in the plane (a focus) and a particular circle, the directrix circle (whose center is the other focus).

The equivalence of these definitions can be proved using the Dandelin spheres.

Equations

The equation of an ellipse whose major and minor axes coincide with the Cartesian axes is . This can be explained as follows. If we let an independent parameter increase from 0 to 2π, and let

and

then plotting x and y values for all angles of θ results in an ellipse. Note that is the eccentric anomaly and is not the angle traced out by a point on the ellipse (see below). For example, at θ = 0, x = a, y = 0 and at θ = π/2, y = b, x = 0. This can be seen as follows.

Squaring both equations gives:

And

Dividing these two equations by a² and b² respectively gives:

And

Adding these two equations together gives:

Applying the Pythagorean identity to the right hand side gives:

This means any noncircular ellipse is a compressed (or stretched) circle. If a circle is treated like an ellipse, then the area of the ellipse would be proportional to the length of either axis (i.e. doubling the length of an axis in a circular ellipse would create an ellipse with double the area of the original circle).

Focus

The distance from the center C to either focus is f = ae, which can be expressed in terms of the major and minor radii:

The sum of the distances from any point P = P(x,y) on the ellipse to those two foci is constant and equal to the major axis (proof):

.

Eccentricity

The eccentricity of the ellipse (commonly denoted as either e or ) is

$e=\varepsilon=\sqrt{\frac{a^2-b^2}{a^2}} =\sqrt{1-\left(\frac{b}{a}\right)^2} =f/a$

(where again a and b are one-half of the ellipse's major and minor axes respectively, and f is the focal distance) or, as expressed in terms using the flattening factor

Other formulas for the eccentricity of an ellipse are listed in the article on eccentricity of conic sections. Formulas for the eccentricity of an ellipse that is expressed in the more general quadratic form are described in the article dedicated to conic sections.

Directrix

Each focus F of the ellipse is associated with a line parallel to the minor axis called a directrix. Refer to the illustration on the right, in which the ellipse is centered at the origin. The distance from any point P on the ellipse to the focus F is a constant fraction of that point's perpendicular distance to the directrix, resulting in the equality e = PF/PD. The ratio of these two distances is the eccentricity of the ellipse. This property (which can be proved using the Dandelin spheres) can be taken as another definition of the ellipse.
Besides the well-known ratio e = f/a, where f is the distance from the center to the focus and a is the distance from the center to the farthest vertices (most sharply curved points of the ellipse), it is also true that e = a/d, where d is the distance from the center to the directrix.

Circular directrix

The ellipse can also be defined as the set of points that are equidistant from one focus and a circle, the directrix circle, that is centered on the other focus. The radius of the directrix circle equals the ellipse's major axis, so the focus and the entire ellipse are inside the directrix circle.

Ellipse as hypotrochoid

An ellipse (in red) as a special case of the hypotrochoid with R = 2r.

The ellipse is a special case of the hypotrochoid when R = 2r, as shown in the image to the right.

Area

The area enclosed by an ellipse is:

where a and b are the semi-major and semi-minor axes (half of the ellipse's major and minor axes), respectively.

An ellipse defined implicitly by has area .

The area formula πab is intuitive: start with a circle of radius b (so its area is πb²) and stretch it by a factor a/b to make an ellipse. This intuitively justifies the area by the same factor: πb²(a/b) = πab. However, a more rigorous proof requires integration as follows:

For the ellipse in standard form, , and hence , with horizontal intercepts at ± a, the area can be computed as twice the integral of the positive square root:

$\begin{align} A_\text{ellipse} &= \int_{-a}^a 2b\sqrt{1-x^2/a^2}\,dx\\ &= \frac ba \int_{-a}^a 2\sqrt{a^2-x^2}\,dx. \end{align}$

The second integral is the area of a circle of radius , i.e., ; thus we have:

The area formula can also be proven in terms of polar coordinates using the coordinate transformation

Any point inside the ellipse with x-intercept a and y-intercept b can be defined in terms of r and , where and .

To define the area differential in such coordinates we use the Jacobian matrix of the coordinate transformation times :

$\begin{align} dA_\text{ellipse} &= \det \begin{pmatrix} \frac{\partial \bold{T}}{\partial r} & \frac{\partial \bold{T}}{\partial \theta}\\ \end{pmatrix} \,dr\,d\theta \\ &= \det \begin{pmatrix} a\cos\theta & -ra\sin\theta \\ b\sin\theta & rb\cos\theta \end{pmatrix} \,dr\,d\theta \\ &= abr\,dr\,d\theta. \end{align}$

We now integrate over the ellipse to find the area:

Circumference

The circumference of an ellipse is:

where again a is the length of the semi-major axis, e is the eccentricity , and the function is the complete elliptic integral of the second kind,

which calculates the circumference of the ellipse in the first quadrant alone, and the formula for the circumference of an ellipse can thus be written

(1)

The arc length of an ellipse, in general, has no closed-form solution in terms of elementary functions. Elliptic integrals were motivated by this problem. Equation (1) may be evaluated directly using the Carlson symmetric form. This gives a succinct and rapidly converging method for evaluating the circumference.

The exact infinite series is:

or

where is the double factorial. Unfortunately, this series converges rather slowly; however, by expanding in terms of , Ivory and Bessel derived an expression that converges much more rapidly,

Ramanujan gives two good approximations for the circumference in §16 of "Modular Equations and Approximations to π"; they are

and

The errors in these approximations, which were obtained empirically, are of order and , respectively.

More generally, the arc length of a portion of the circumference, as a function of the angle subtended, is given by an incomplete elliptic integral.

See also: Meridian arc § Meridian distance on the ellipsoid

The inverse function, the angle subtended as a function of the arc length, is given by the elliptic functions.

Some lower and upper bounds on the circumference of the canonical ellipse with a ≥b are

Here the upper bound is the circumference of a circumscribed concentric circle passing through the endpoints of the ellipse's major axis, and the lower bound is the perimeter of an inscribed rhombus with vertices at the endpoints of the major and minor axes.

Chords

The midpoints of a set of parallel chords of an ellipse are collinear.

Latus rectum

The chords of an ellipse that are perpendicular to the major axis and pass through one of its foci are called the latera recta of the ellipse. The length of each latus rectum is 2b²/a.

Curvature

The curvature is given by

Angle bisection property

A local normal (perpendicular) to the ellipse at any point P bisects the angle to the foci. This is evident graphically in the parallelogram method of construction, and can be proven analytically, for example by using the parametric form in canonical position, as given below.

Reflexive property

When a ray of light originating from one focus reflects off the inner surface of an ellipse, it always passes through the other focus.

In projective geometry

In a projective geometry defined over a field, a conic section can be defined as the set of all points of intersection between corresponding lines of two pencils of lines in a plane that are related by a projective, but not perspective, map (see Steiner's theorem). By projective duality, a conic section can also be defined as the envelope of all lines that connect corresponding points of two lines related by a projective, but not perspective, map.

In a pappian projective plane (one defined over a field), all conic sections are equivalent to each other, and the different types of conic sections are determined by how they intersect the line at infinity, denoted by Ω. An ellipse is a conic section that does not intersect this line. A parabola is a conic section that is tangent to Ω, and a hyperbola is one that crosses Ω twice. Since an ellipse does not intersect the line at infinity, it properly belongs to the affine plane determined by removing the line at infinity and all of its points from the projective plane.

Affine space

An ellipse is also the result of projecting a circle, sphere, or ellipse in a three dimensional affine space onto a plane (flat), by parallel lines. This is a special case of conical (perspective) projection of any of those geometric objects in the affine space from a point O onto a plane P, when the point O lies in the plane at infinity of the affine space. In the setting of pappian projective planes, the image of an ellipse by any affine map (a projective map that leaves the line at infinity invariant) is an ellipse, and, more generally, the image of an ellipse by any projective map M such that the line M⁻¹(Ω) does not touch or cross the ellipse is an ellipse.

In analytic geometry

General ellipse

In analytic geometry, the ellipse is defined as the set of points of the Cartesian plane that, in non-degenerate cases, satisfy the implicit equation

provided

To distinguish the degenerate cases from the non-degenerate case, let ∆ be the determinant

that is,

Then the ellipse is a non-degenerate real ellipse if and only if C∆ < 0. If C∆ > 0, we have an imaginary ellipse, and if ∆ = 0, we have a point ellipse.

The general equation's coefficients can be obtained from known semi-major axis , semi-minor axis , center coordinates and rotation angle using the following formulae:

$\begin{align}A &= a^2 (\sin\Theta)^2 + b^2 (\cos\Theta)^2\\ B &= 2 (b^2-a^2) \sin\Theta \cos\Theta\\ C &= a^2 (\cos\Theta)^2 + b^2 (\sin\Theta)^2\\ D &= -2 A x_c - B y_c\\ E &= -B x_c - 2 C y_c\\ F &= A x_c^2 + B x_c y_c + C y_c^2 - a^2 b^2\end{align}$

These expressions can be derived from the canonical equation (see next section) by substituting the coordinates with expressions for rotation and translation of the coordinate system:

Canonical form

Let . Through change of coordinates (a rotation of axes and a translation of axes) the general ellipse can be described by the canonical implicit equation

Here are the point coordinates in the canonical system, whose origin is the center of the ellipse, whose -axis is the unit vector coinciding with the major axis, and whose -axis is the perpendicular vector coinciding with the minor axis. That is, and .

In this system, the center is the origin and the foci are and .

Any ellipse can be obtained by rotation and translation of a canonical ellipse with the proper semi-diameters. The expression of an ellipse centered at is

Moreover, any canonical ellipse can be obtained by scaling the unit circle of , defined by the equation

by factors a and b along the two axes.

For an ellipse in canonical form, we have

The distances from a point on the ellipse to the left and right foci are and , respectively.

Line segment as a type of degenerate ellipse

A line segment is a degenerate ellipse with semi-minor axis = 0 and eccentricity = 1, and with the focal points at the ends. Although the eccentricity is 1 this is not a parabola. A radial elliptic trajectory is a non-trivial special case of an elliptic orbit, where the ellipse is a line segment.

In trigonometry

General parametric form

An ellipse in general position can be expressed parametrically as the path of a point , where

as the parameter t varies from 0 to 2π. Here is the center of the ellipse, and is the angle between the -axis and the major axis of the ellipse.

Parametric form in canonical position

Parametric equation for the ellipse (red) in canonical position. The eccentric anomaly t is the angle of the blue line with the X-axis.

For an ellipse in canonical position (center at origin, major axis along the X-axis), the equation simplifies to

The parameter t (called the eccentric anomaly in astronomy) is not the angle of with the X-axis (see diagram at right).

For a given point on an ellipse, formulae connecting the tangential angle , the polar angle from the ellipse center , and the parametric angle t are:

Polar form relative to center

Polar coordinates centered at the center.

In polar coordinates, with the origin at the center of the ellipse and with the angular coordinate measured from the major axis, the ellipse's equation is

Polar form relative to focus

Polar coordinates centered at focus.

If instead we use polar coordinates with the origin at one focus, with the angular coordinate still measured from the major axis, the ellipse's equation is

where the sign in the denominator is negative if the reference direction points towards the center (as illustrated on the right), and positive if that direction points away from the center.

In the slightly more general case of an ellipse with one focus at the origin and the other focus at angular coordinate , the polar form is

The angle in these formulas is called the true anomaly of the point. The numerator of these formulas is the semi-latus rectum of the ellipse, usually denoted . It is the distance from a focus of the ellipse to the ellipse itself, measured along a line perpendicular to the major axis.

Semi-latus rectum.

General polar form

The following equation on the polar coordinates (r, θ) describes a general ellipse with semidiameters a and b, centered at a point (r₀, θ₀), with the a axis rotated by φ relative to the polar axis:

where r is the radius or central distance, and

$P(\theta)=r_0 \left[\left(b^2-a^2\right) \cos\left(\theta+\theta_0 -2\varphi \right)+\left(a^2+b^2\right) \cos \left(\theta -\theta_0\right)\right]$

Angular eccentricity

The angular eccentricity is the angle whose sine is the eccentricity e; that is,

As a parametric rational polynomial

An ellipse can be parameterized as a rational quadratic polynomial, in other words described by the equations and where and are quadratic polynomials in The tangent half-angle identities

imply and this implies

Substituting this equation for into the first tangent half-angle identity yields

Substituting these values for and into the trigonometric parameterization above yields

For this formula represents the quarter ellipse centered at the origin with radii and moving counter-clockwise with increasing It is easy to test this by computing and

Degrees of freedom

An ellipse in the plane has five degrees of freedom (the same as a general conic section), defining its vertical and horizontal position, orientation, shape, and scale. In comparison, circles have only three degrees of freedom (horizontal position, vertical position and scale), while parabolae have four. Said another way, the set of all ellipses in the plane, with any natural metric (such as the Hausdorff distance) is a five-dimensional manifold.

The five degrees of freedom can be identified with, for example, the coefficients A,B,C,D,E of the implicit equation, or with the coefficients X_c, Y_c, φ, a, b of the general parametric form. Thus an ellipse is uniquely determined by any five points lying on it.

Applications

Ellipses in physics

Elliptical reflectors and acoustics

See also: Fresnel zone

If the water's surface is disturbed at one focus of an elliptical water tank, the circular waves of that disturbance, after reflecting off the walls, converge simultaneously to a single point: the second focus. This is a consequence of the total travel length being the same along any wall-bouncing path between the two foci.

Similarly, if a light source is placed at one focus of an elliptic mirror, all light rays on the plane of the ellipse are reflected to the second focus. Since no other smooth curve has such a property, it can be used as an alternative definition of an ellipse. (In the special case of a circle with a source at its center all light would be reflected back to the center.) If the ellipse is rotated along its major axis to produce an ellipsoidal mirror (specifically, a prolate spheroid), this property holds for all rays out of the source. Alternatively, a cylindrical mirror with elliptical cross-section can be used to focus light from a linear fluorescent lamp along a line of the paper; such mirrors are used in some document scanners.

Sound waves are reflected in a similar way, so in a large elliptical room a person standing at one focus can hear a person standing at the other focus remarkably well. The effect is even more evident under a vaulted roof shaped as a section of a prolate spheroid. Such a room is called a whisper chamber. The same effect can be demonstrated with two reflectors shaped like the end caps of such a spheroid, placed facing each other at the proper distance. Examples are the National Statuary Hall at the United States Capitol (where John Quincy Adams is said to have used this property for eavesdropping on political matters); the Mormon Tabernacle at Temple Square in Salt Lake City, Utah; at an exhibit on sound at the Museum of Science and Industry in Chicago; in front of the University of Illinois at Urbana-Champaign Foellinger Auditorium; and also at a side chamber of the Palace of Charles V, in the Alhambra.

Planetary orbits

Main article: Elliptic orbit

In the 17th century, Johannes Kepler discovered that the orbits along which the planets travel around the Sun are ellipses with the Sun [approximately] at one focus, in his first law of planetary motion. Later, Isaac Newton explained this as a corollary of his law of universal gravitation.

More generally, in the gravitational two-body problem, if the two bodies are bound to each other (i.e., the total energy is negative), their orbits are similar ellipses with the common barycenter being one of the foci of each ellipse. The other focus of either ellipse has no known physical significance. Interestingly, the orbit of either body in the reference frame of the other is also an ellipse, with the other body at the same focus.

Keplerian elliptical orbits are the result of any radially directed attraction force whose strength is inversely proportional to the square of the distance. Thus, in principle, the motion of two oppositely charged particles in empty space would also be an ellipse. (However, this conclusion ignores losses due to electromagnetic radiation and quantum effects, which become significant when the particles are moving at high speed.)

For elliptical orbits, useful relations involving the eccentricity are:

$\begin{align}e &= \frac{r_{a}-r_{p}}{r_{a}+r_{p}}=\frac{r_{a}-r_{p}}{2a}\\ r_{a} &= (1+e)a\\ r_{p} &= (1-e)a\end{align}$

where

• is the radius at apoapsis (the farthest distance)
• is the radius at periapsis (the closest distance)
• is the length of the semi-major axis

Also, in terms of and , the semi-major axis is their arithmetic mean, the semi-minor axis is their geometric mean, and the semi-latus rectum is their harmonic mean. In other words,

$\begin{align}a &= \frac{r_{a}+r_{p}}{2}\\ b &= \sqrt{r_{a}\cdot r_{p}}\\ l &= \frac{2}{\frac{1}{r_{a}}+\frac{1}{r_{p}}}=\frac{2r_{a}r_{p}}{r_{a}+r_{p}}\end{align}$.

Harmonic oscillators

The general solution for a harmonic oscillator in two or more dimensions is also an ellipse. Such is the case, for instance, of a long pendulum that is free to move in two dimensions; of a mass attached to a fixed point by a perfectly elastic spring; or of any object that moves under influence of an attractive force that is directly proportional to its distance from a fixed attractor. Unlike Keplerian orbits, however, these "harmonic orbits" have the center of attraction at the geometric center of the ellipse, and have fairly simple equations of motion.

Phase visualization

In electronics, the relative phase of two sinusoidal signals can be compared by feeding them to the vertical and horizontal inputs of an oscilloscope. If the display is an ellipse, rather than a straight line, the two signals are out of phase.

Elliptical gears

Two non-circular gears with the same elliptical outline, each pivoting around one focus and positioned at the proper angle, turn smoothly while maintaining contact at all times. Alternatively, they can be connected by a link chain or timing belt, or in the case of a bicycle the main chainring may be elliptical, or an ovoid similar to an ellipse in form. Such elliptical gears may be used in mechanical equipment to produce variable angular speed or torque from a constant rotation of the driving axle, or in the case of a bicycle to allow a varying crank rotation speed with inversely varying mechanical advantage.

Elliptical bicycle gears make it easier for the chain to slide off the cog when changing gears.

An example gear application would be a device that winds thread onto a conical bobbin on a spinning machine. The bobbin would need to wind faster when the thread is near the apex than when it is near the base.

Optics

• In a material that is optically anisotropic (birefringent), the refractive index depends on the direction of the light. The dependency can be described by an index ellipsoid. (If the material is optically isotropic, this ellipsoid is a sphere.)
• In lamp-pumped solid-state lasers, elliptical cylinder-shaped reflectors have been used to direct light from the pump lamp (coaxial with one ellipse focal axis) to the active medium rod (coaxial with the second focal axis).
• In laser-plasma produced EUV light sources used in microchip lithography, EUV light is generated by plasma positioned in the primary focus of an ellipsoid mirror and is collected in the secondary focus at the input of the lithography machine.

Ellipses in statistics and finance

In statistics, a bivariate random vector (X, Y) is jointly elliptically distributed if its iso-density contours — loci of equal values of the density function — are ellipses. The concept extends to an arbitrary number of elements of the random vector, in which case in general the iso-density contours are ellipsoids. A special case is the multivariate normal distribution. The elliptical distributions are important in finance because if rates of return on assets are jointly elliptically distributed then all portfolios can be characterized completely by their mean and variance — that is, any two portfolios with identical mean and variance of portfolio return have identical distributions of portfolio return.

Ellipses in computer graphics

Drawing an ellipse as a graphics primitive is common in standard display libraries, such as the MacIntosh QuickDraw API, and Direct2D on Windows. Jack Bresenham at IBM is most famous for the invention of 2D drawing primitives, including line and circle drawing, using only fast integer operations such as addition and branch on carry bit. M. L. V. Pitteway extended Bresenham's algorithm for lines to conics in 1967. Another efficient generalization to draw ellipses was invented in 1984 by Jerry Van Aken.

In 1970 Danny Cohen presented at the "Computer Graphics 1970" conference in England a linear algorithm for drawing ellipses and circles. In 1971, L. B. Smith published similar algorithms for all conic sections and proved them to have good properties. These algorithms need only a few multiplications and additions to calculate each vector.

It is beneficial to use a parametric formulation in computer graphics because the density of points is greatest where there is the most curvature. Thus, the change in slope between each successive point is small, reducing the apparent "jaggedness" of the approximation.

Drawing with Bézier paths

Composite Bézier curves may also be used to draw an ellipse to sufficient accuracy, since any ellipse may be construed as an affine transformation of a circle. The spline methods used to draw a circle may be used to draw an ellipse, since the constituent Bézier curves behave appropriately under such transformations.

Drawing with three points of a parallelogram

Rytz’s construction can be used to find the minor and major axes and their angle of an ellipse from conjugate diameters (which can be seen as three points of a parallelogram). The method uses the conjugate diameters of an ellipse to map the ellipse to an unit circle under affine transformation and calculate the ellipse parameters from that.

Ellipses in optimization theory

It is sometimes useful to find the minimum bounding ellipse on a set of points. The ellipsoid method is quite useful for attacking this problem.

See also

• Apollonius of Perga, the classical authority
• Cartesian oval, a generalization of the ellipse
• Circumconic and inconic
• Conic section
• Derivation of the Cartesian form for an ellipse
• Ellipse fitting
• Ellipsoid, a higher dimensional analog of an ellipse
• Elliptic coordinates, an orthogonal coordinate system based on families of ellipses and hyperbolae
• Elliptic partial differential equation
• Elliptical distribution, in statistics
• Geodesics on an ellipsoid
• Great ellipse
• Hyperbola
• Kepler's laws of planetary motion
• Matrix representation of conic sections
• n-ellipse, a generalization of the ellipse for n foci
• Oval
• Parabola
• Rytz’s construction, a method for finding the ellipse axes from conjugate diameters or a parallelogram
• Spheroid, the ellipsoid obtained by rotating an ellipse about its major or minor axis
• Steiner circumellipse, the unique ellipse circumscribing a triangle and sharing its centroid
• Steiner inellipse, the unique ellipse inscribed in a triangle with tangencies at the sides' midpoints
• Superellipse, a generalization of an ellipse that can look more rectangular or more "pointy"
• True, eccentric, and mean anomaly

Notes

References

• Besant, W.H. (1907). "Chapter III. The Ellipse". Conic Sections. London: George Bell and Sons. p. 50. 
• Coxeter, H.S.M. (1969). Introduction to Geometry (2nd ed.). New York: Wiley. pp. 115–9. 
• Meserve, Bruce E. (1983) [1959], Fundamental Concepts of Geometry, Dover, ISBN 0-486-63415-9 
• Miller, Charles D.; Lial, Margaret L.; Schneider, David I. (1990). Fundamentals of College Algebra (3rd ed.). Scott Foresman/Little. p. 381. ISBN 0-673-38638-4. 

External links

• Apollonius' Derivation of the Ellipse at Convergence
• The Shape and History of The Ellipse in Washington, D.C. by Clark Kimberling
• Ellipse circumference calculator
• Collection of animated ellipse demonstrations
• Weisstein, Eric W., "Ellipse", MathWorld.
• Weisstein, Eric W., "Ellipse as special case of hypotrochoid", MathWorld.
• Ivanov, A.B. (2001), "Ellipse", in Hazewinkel, Michiel, Encyclopedia of Mathematics, Springer, ISBN 978-1-55608-010-4 

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

• 1. 特発性頭蓋内圧亢進症（偽脳腫瘍）：疫学および病因 idiopathic intracranial hypertension pseudotumor cerebri epidemiology and pathogenesis
• 2. 結節性硬化症：遺伝学、臨床的特徴、および診断 tuberous sclerosis complex genetics clinical features and diagnosis

English Journal

• MIB Galerkin method for elliptic interface problems.

• Xia K1, Zhan M2, Wei GW3.
• Journal of computational and applied mathematics.J Comput Appl Math.2014 Dec 15;272:195-220.
• Material interfaces are omnipresent in the real-world structures and devices. Mathematical modeling of material interfaces often leads to elliptic partial differential equations (PDEs) with discontinuous coefficients and singular sources, which are commonly called elliptic interface problems. The de
• PMID 24999292

• Cryptanalysis and improvement of authentication and key agreement protocols for telecare medicine information systems.

• Islam SH1, Khan MK.
• Journal of medical systems.J Med Syst.2014 Oct;38(10):135. doi: 10.1007/s10916-014-0135-9. Epub 2014 Sep 5.
• Recently, many authentication protocols have been presented using smartcard for the telecare medicine information system (TMIS). In 2014, Xu et al. put forward a two-factor mutual authentication with key agreement protocol using elliptic curve cryptography (ECC). However, the authors have proved tha
• PMID 25190590

• Lightweight ECC Based RFID Authentication Integrated with an ID Verifier Transfer Protocol.

• He D1, Kumar N, Chilamkurti N, Lee JH.
• Journal of medical systems.J Med Syst.2014 Oct;38(10):116. doi: 10.1007/s10916-014-0116-z. Epub 2014 Aug 6.
• The radio frequency identification (RFID) technology has been widely adopted and being deployed as a dominant identification technology in a health care domain such as medical information authentication, patient tracking, blood transfusion medicine, etc. With more and more stringent security and pri
• PMID 25096968

• Characterization of bionanocomposite films prepared with agar and paper-mulberry pulp nanocellulose.

• Reddy JP1, Rhim JW2.
• Carbohydrate polymers.Carbohydr Polym.2014 Sep 22;110:480-8. doi: 10.1016/j.carbpol.2014.04.056. Epub 2014 Apr 25.
• Crystallized nanocellulose (CNC) was separated from paper-mulberry (Broussonetia kazinoki Siebold) bast pulp by sulfuric acid hydrolysis method and they were blended with agar to prepare bionanocomposite films. The effect of CNC content (1, 3, 5 and 10 wt% based on agar) on the mechanical, water vap
• PMID 24906782

Japanese Journal

• Elliptic flow in small systems due to elliptic gluon distributions?

• Physics Letters B 771, 374-378, 2017-08-10
• NAID 120006325124

• Transcatheter Aortic Valve Replacement With Different Valve Types in Elliptic Aortic Annuli

• Circulation journal : official journal of the Japanese Circulation Society 81(7), 1036-1042, 2017-07
• NAID 40021227539

• On the distribution of rank two τ-congruent numbers

• Proceedings of the Japan Academy. Series. A, Mathematical sciences 93(5), 37-40, 2017-05
• NAID 40021206941

• Measurement of D0 Azimuthal Anisotropy at Midrapidity in Au+Au Collisions at √sNN=200  GeV

• Physical review letters 118(21), 212301, 2017-05
• NAID 120006312350

Related Links

• ave;new : elLiptic -エリプティック- ave;new feat.佐倉紗織

ave;new feat.佐倉紗織 コンセプトミニアルバム『elLiptic -エリプティック-』 2012年10月5日(金)リリース！ ひろがり、とけていく エリプティック それは「elLiptic（楕円)」と名付けられたあらたなカタチ 『ave;new feat.佐倉紗織』初のコンセプト ...

• Elliptic Technologies

Elliptic Technologies delivers a broad and proven portfolio of highly integrated and intelligent solutions for embedded security in the world’s leading electronics markets. ... A proven HDCP-based content protection solution that ...

• Elliptic Technologies

Elliptic Technologies delivers a broad and proven portfolio of highly integrated and intelligent solutions for embedded security in the world’s leading electronics markets. ... TEE（Trusted Execution Environments）内で堅固な安全性を ...

---

★リンクテーブル★

リンク元	「楕円形」
拡張検索	「elliptically polarized light」「elliptic polarization of light」「elliptical」

「楕円形」

　　[★]

英

elliptic、elliptical

「elliptically polarized light」

　　[★]

• 楕円偏光

関

elliptic polarization of light

「elliptic polarization of light」

　　[★]

• 楕円偏光

関

elliptically polarized light

「elliptical」

　　[★]

• 楕円形の

関

elliptic