出典(authority):フリー百科事典『ウィキペディア(Wikipedia)』「2015/06/25 17:22:12」(JST)
This article refers to the cell-cycle regulatory complex, APC/C. For the tumor suppressor APC, in which mutations lead to colon cancer, see Adenomatous polyposis coli.
Anaphase-Promoting Complex (also called the cyclosome or APC/C) is an E3 ubiquitin ligase that marks target cell cycle proteins for degradation by the 26S proteasome. The APC/C is a large complex of 11–13 subunit proteins, including a cullin (Apc2) and RING (Apc11) subunit much like SCF. Other parts of the APC/C still have unknown functions, but are highly conserved.[1]
It was the discovery of the APC/C (and SCF) and their key role in eukaryotic cell reproduction that established once and for all the importance of ubiquitin-mediated proteolysis in eukaryotic cell biology. Once perceived as a system exclusively involved in removing damaged protein from the cell, ubiquitination and subsequent protein degradation by the proteasome is now perceived as a universal regulatory mechanism for signal transduction whose importance approaches that of protein phosphorylation.
In 2014, the APC/C was mapped in 3D at a resolution of less than a nanometre, which also uncovered its secondary structure. Researchers have claimed this finding could transform the understanding of cancer and reveal new binding sites for future cancer drugs.[2][3]
The APC/C's main function is to trigger the transition from metaphase to anaphase by tagging specific proteins for degradation. The three proteins of most importance that get degraded in this process as substrates of the APC/C are securin and S and M cyclins. Securin releases separase, a protease, after being degraded which in turn triggers the cleavage of cohesin, the protein complex that binds sister chromatids together. During metaphase, sister chromatids are linked by intact cohesin complexes. When securin undergoes ubiquitination by the APC/C and releases separase, which degrades cohesin, sister chromatids become free to move to opposite poles for anaphase. The APC/C also targets the mitotic cyclins for degradation, resulting in the inactivation of M-CdK (mitotic cyclin-dependent kinase) complexes, promoting exit from mitosis and cytokinesis.[1]
Unlike the SCF, activator subunits control the APC/C. Cdc20 and Cdh1 are the two activators of particular importance to the cell cycle. These proteins target the APC/C to specific sets of substrates at different times in the cell cycle, thus driving it forward. The APC/C also plays an integral role in maintenance of chromatin metabolism, particularly in G1 and G0, and plays a key role in phosphorylation of H3 through destruction of the aurora A kinase.[4]
The catalytic core of the APC/C consists of the cullin subunit Apc2 and RING H2 domain subunit Apc11. These two subunits catalyze ubiquitylation of substrates when the C-terminal domain of Apc2 forms a tight complex with Apc11. In addition to the catalytic subunits, other core proteins of the APC are composed multiple repeat motifs with the main purpose of providing molecular scaffold support. These include Apc1, the largest subunit which contains 11 tandem repeats of 35-40 amino acid sequences, and Apc2, which contains three cullin repeats of approximately 130 amino acids total.[5]
Most notably, 4 subunits of yeast APC/C consist almost entirely of multiple repeats of the 34 amino acid tetratricopeptide residue (TPR) motif. These TPR subunits, Cdc16, Cdc27, Cdc23, and Apc5, mainly provide scaffolding and support to mediate other protein-protein interactions. Cdc27 and Cdc23 have been shown to support the binding of Cdc20 and Cdh1, as mutations in key residues of these subunits led to increased dissociation of the activators. Apc10/Doc1, has been shown to promote substrate binding by mediating their interactions with Cdh1 and Cdc20.[6]
The subunit Apc15 plays an important role in APC/CCdc20 activation following the bi-orientation of sister chromatids across the metaphase plate. When kinetochores are unattached to spindles, mitotic checkpoint complexes (MCC) and inhibit APC. In the absence of Apc15, MCCs and Cdc20 remain locked on the APC/C preventing its activity once the spindle checkpoint requirements are met. Apc15 mediates the turnover of Cdc20 and MCCs to provide information on the attachment state of kinetochores.[7]
APC/C substrates have recognition amino acid sequences that enable the APC/C to identify them. The most common sequence is known as the destruction box or D-box. APC/C brings together an E2 ubiquitin-conjugating enzyme and the D-box rather than being an intermediate covalent carrier.[8] The D-box should have a version of the following amino acid sequence: RXXLXXXXN, where R is arginine, X is any amino acid, L is Leucine, and N is asparagine. The Ken-box is another motif of importance. Its sequence should resemble the one that follows: KENXXXN, where K is lysine and E is glutamate. The last amino acid position in the Ken-box is highly variable. Though it has been shown that mutations in the sequences do inhibit destruction of the proteins "in vivo", there is still much to learn about how proteins are targeted by the APC/C.[1]
Once bound to APC/C, Cdc20 and Cdh1 serve as D and KEN box receptors for various APC substrates. Kraft et al. have shown that the substrates’ D boxes bind directly to the highly conserved WD40 repeat propeller region on the APC activators. It is important to note that the conserved area of the propeller of Cdh1 is much larger than that of Cdc20, allowing Cdh1 to have a broader substrate specificity, consistent with the fact that APC/CCdh1 also activates APC-mediated destruction of KEN box containing substrates. The D box further enhances protein degradation, for Lysine residues in close proximity to the D box serve as targets of ubiquitylation. It has been found that a Lys residue immediately C-terminal to the D box can function as a ubiquitin acceptor.[9]
Many APC substrates contain both D and KEN boxes, with their ubiquitylation by either APC/CCdc20 or APC/CCdh1 dependent on both sequences, yet some substrates contain only either a D box or a KEN box, in one or multiple copies. Having two distinct degradation sequences creates a high level of substrate specificity on the APC/C, with APC/CCdc20 being more dependent on the D box and APC/CCdh1 more dependent on the KEN box. For example, APC/CCdh1 is capable of ubiquitylating KEN box-only-containing substrates like Tome-1 and Sororin.[5]
Although Cdc20 and Cdh1 may serve as D and KEN box receptors, the low affinity of these co-activator–substrate interactions suggests that it is unlikely that the co-activators alone are sufficient to confer high-affinity substrate binding to the APC/CCdc20 and APC/CCdh1.[5] Consequently core APC/C subunits, like Apc10, contribute towards substrate association as well. In APC/C constructs lacking the Apc10/Doc1 subunit, substrates like Clb2 are unable to associate with APCΔdoc1–Cdh1, while addition of purified Doc1 to the APCΔdoc1–Cdh1 construct restores the substrate binding ability.[6]
As metaphase begins, the spindle checkpoint inhibits the APC/C until all sister-kinetochores are attached to opposite poles of the mitotic spindle, a process known as chromosome biorientation. When all kinetochores are properly attached, the spindle checkpoint is silenced and the APC/C can become active. M-Cdks phosphorylate subunits on the APC/C that promote binding to Cdc20. Securin and M Cyclins (cyclin A and cyclin B) are then targeted by APC/CCdc20 for degradation. Once degraded, separin is released, cohesin is degraded and sister chromatids are prepared to move to their respective poles for anaphase.[1]
It is likely that, in animal cells, at least some of the activation of APC/CCdc20 occurs early in the cell cycle (prophase or prometaphase) based on the timing of the degradation of its substrates. Cyclin A is degraded early in mitosis, supporting the theory, but cyclin B and securin are not degraded until metaphase. The molecular basis of the delay is unknown, but is believed to involve the key to the correct timing of anaphase initiation. In animal cells the spindle checkpoint system contributes to the delay if it needs to correct the bi-orientation of chromosomes. Though how the spindle checkpoint system inhibits cyclin B and securin destruction while allowing cyclin A to be degraded is unknown. The delay may also be explained by unknown interactions with regulators, localization and phosphorylation changes.[1]
This initiates a negative feedback loop. While activation of APC/CCdc20 requires M-Cdk, the complex is also responsible for breaking the cyclin to deactivate M-CdK. This means that APC/CCdc20 fosters its own deactivation. It is possible that this negative feedback is the backbone of Cdk activity controlled by M and S cyclin concentration oscillations.[1]
Upon completion of mitosis, it is important that cells (except for embryonic ones) go through a growth period, known as G1 phase, to grow and produce factors necessary for the next cell cycle. Entry into another round of mitosis is prevented by inhibiting Cdk activity. While different processes are responsible for this inhibition, an important one is activation of the APC/C by Cdh1. This continued activation prevents the accumulation of cyclin that would trigger another round of mitosis and instead drives exit from mitosis.[1]
In the beginning of the cell cycle Cdh1 is phosphorylated by M-Cdk, preventing it from attaching to APC/C. APC/C is then free to attach to Cdc20 and usher the transition from metaphase to anaphase. As M-Cdk gets degraded later in mitosis, Cdc20 gets released and Cdh1 can bind to APC/C, keeping it activated through the M/G1 transition. A key difference to note is that while binding of Cdc20 to APC/C is dependent on phosphorylation of APC/C by mitotic Cdks, binding of Cdh1 is not. Thus, as APCCdc20 becomes inactivated during metaphase due to dephosphorylation resulting from inactive mitotic Cdks, Cdh1 is able to immediately bind to APC/C, taking Cdc20’s place. Cdc20 is also a target of APC/CCdh1, ensuring that APC/CCdc20 is shut down. APC/CCdh1 then continues working in G1 to tag S and M cyclins for destruction. However, G1/S cyclins are not substrates of APC/CCdh1 and therefore accumulate throughout this phase and phosphorylate Cdh1. By late G1, enough of the G1/S cyclins have accumulated and phosphorylated Cdh1 to inactivate the APC/C until the next metaphase.[1]
Once in G1, APCCdh1 is responsible for the degradation various proteins that promote proper cell cycle progression. Geminin is a protein that binds to Cdt1 which prevents its binding to the origin recognition complex (ORC). APCCdh1 targets geminin for ubiquitination throughout G1, keeping its levels low. This allows Cdt1 to carry out its function during pre-RC assembly. When APCCdh1 becomes inactive due to phosphorylation of Cdh1 by G1/S cyclins, geminin activity is increased again. Additionally, Dbf4 stimulates Cell division cycle 7-related protein kinase (Cdc7) activity, which promotes activation of replication origins. APCCdh1 is thought to target Dbf4 for destruction. This could provide an answer as to how Cdc7 is activated at the beginning of a new cell cycle. Its activity likely corresponds to the inactivation of APC/CCdh1 by G/S cyclins.[1]
APC/CCdc20 inactivation during early stages of the cell cycle is partially achieved by the protein Emi1. Initial experiments have shown that addition of Emi1 to Xenopus cycling exracts can prevent the destruction of endogenous cyclin A, cyclin B, and mitotic exit, suggesting that Emi1 is able to counteract the activity of the APC. Furthermore, depletion of Emi1 in somatic cells leads to the lack of accumulation of cyclin B. The lack of Emi1 likely leads to a lack of inhibition of the APC preventing cyclin B from accumulating.[10]
From these early observations, it has been confirmed that in G2 and early mitosis, Emi1 binds and inhibits Cdc20 by preventing its association with APC substrates. Cdc20 can still be phosphorylated and bind to APC/C, but bound Emi1 blocks Cdc20’s interaction with APC targets.[1] Emi1 association with Cdc20 allows for the stabilization of various cyclins throughout S and G2 phase, but Emi1’s removal is essential for progression through mitosis. Thus, in late prophase, Emi1 is phosphorylated by Polo-like kinase, Plk. Plk is activated during early mitosis by Cdk1 activity, and its phosphorylation of Emi1’s BTRC (gene) βTrCP binding site makes it a target for SCF, leading to its subsequent destruction in prometaphase.[11] Emi1’s destruction leads APC/CCdc20 activation, allowing for the destruction of cyclin A in early mitosis. Emi1 levels begin to rise again in G, which help inhibit APC/CCdh1.[1]
Regulation of APC/CCdc20 activity towards metaphase substrates like securin and cyclin B may be a result of intracellular localization. It is hypothesized that spindle checkpoint proteins that inhibit APC/CCdc20 only associate with a subset of the Cdc20 population localized near the mitotic spindle. In this manner, cyclin A can be degraded while cyclin B and securin are degraded only once sister chromatids have achieved bi-orientation.[1]
|
|
|
|
リンク元 | 「サイクロソーム」「anaphase-promoting complex」「サイクロゾーム」 |
.