confocal laser scanning microscope

共焦点レーザー顕微鏡、共焦点レーザー走査顕微鏡、共焦点レーザー走査型顕微鏡

関

confocal laser scanning microscopy

WordNet

1. the process of translating photographs into a digital form that can be recognized by a computer
2. the act of systematically moving a finely focused beam of light or electrons over a surface in order to produce an image of it for analysis or transmission
3. an acronym for light amplification by stimulated emission of radiation; an optical device that produces an intense monochromatic beam of coherent light (同)optical maser
4. magnifier of the image of small objects; "the invention of the microscope led to the discovery of the cell"

PrepTutorEJDIC

1. レーザー(強力な可視光線を発生させる;医療,通信,軍事用)
2. 『顕微鏡』
3. (数皆で,図形が)焦点を共有する,共焦点の

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2017/07/04 21:37:40」(JST)

wiki en

[Wiki en表示]

Confocal Microscopy
Medical diagnostics
MeSH	D018613
OPS-301 code	3-301

Principle of confocal microscopy

Play media

Fluorescent and confocal microscopes operating principle

Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of adding a spatial pinhole placed at the confocal plane of the lens to eliminate out-of-focus light. It enables the reconstruction of three-dimensional structures from sets of images obtained at different depths (a process known as optical sectioning) within a thick object. This technique has gained popularity in the scientific and industrial communities and typical applications are in life sciences, semiconductor inspection and materials science.

A conventional microscope "sees" as far into the specimen as the light can penetrate, while a confocal microscope only "sees" images one depth level at a time. In effect, the CLSM achieves a controlled and highly limited depth of focus.

Basic concept

Confocal point sensor principle from Minsky's patent

The principle of confocal imaging was patented in 1957 by Marvin Minsky and aims to overcome some limitations of traditional wide-field fluorescence microscopes. In a conventional (i.e., wide-field) fluorescence microscope, the entire specimen is flooded evenly in light from a light source. All parts of the specimen in the optical path are excited at the same time and the resulting fluorescence is detected by the microscope's photodetector or camera including a large unfocused background part. In contrast, a confocal microscope uses point illumination (see Point Spread Function) and a pinhole in an optically conjugate plane in front of the detector to eliminate out-of-focus signal – the name "confocal" stems from this configuration. As only light produced by fluorescence very close to the focal plane can be detected, the image's optical resolution, particularly in the sample depth direction, is much better than that of wide-field microscopes. However, as much of the light from sample fluorescence is blocked at the pinhole, this increased resolution is at the cost of decreased signal intensity – so long exposures are often required. To offset this drop in signal after the pinhole, the light intensity is detected by a sensitive detector, usually a photomultiplier tube (PMT) or avalanche photodiode, transforming the light signal into an electrical one that is recorded by a computer.

As only one point in the sample is illuminated at a time, 2D or 3D imaging requires scanning over a regular raster (i.e., a rectangular pattern of parallel scanning lines) in the specimen. The beam is scanned across the sample in the horizontal plane by using one or more (servo controlled) oscillating mirrors. This scanning method usually has a low reaction latency and the scan speed can be varied. Slower scans provide a better signal-to-noise ratio, resulting in better contrast and higher resolution.

The achievable thickness of the focal plane is defined mostly by the wavelength of the used light divided by the numerical aperture of the objective lens, but also by the optical properties of the specimen. The thin optical sectioning possible makes these types of microscopes particularly good at 3D imaging and surface profiling of samples.

Successive slices make up a 'z-stack' which can either be processed by certain software to create a 3D image, or it is merged into a 2D stack (predominately the maximum pixel intensity is taken, other common methods include using the standard deviation or summing the pixels).

GFP fusion protein being expressed in Nicotiana benthamiana. The fluorescence is visible by confocal microscopy.

Confocal microscopy provides the capacity for direct, noninvasive, serial optical sectioning of intact, thick, living specimens with a minimum of sample preparation as well as a marginal improvement in lateral resolution. Biological samples are often treated with fluorescent dyes to make selected objects visible. However, the actual dye concentration can be low to minimize the disturbance of biological systems: some instruments can track single fluorescent molecules. Also, transgenic techniques can create organisms that produce their own fluorescent chimeric molecules (such as a fusion of GFP, green fluorescent protein with the protein of interest).

Techniques used for horizontal scanning

Four types of confocal microscopes are commercially available: Confocal laser scanning microscopes use multiple mirrors (typically 2 or 3 scanning linearly along the x and the y axis) to scan the laser across the sample and "descan" the image across a fixed pinhole and detector.

Spinning-disk (Nipkow disk) confocal microscopes use a series of moving pinholes on a disc to scan spots of light. Since a series of pinholes scans an area in parallel each pinhole is allowed to hover over a specific area for a longer amount of time thereby reducing the excitation energy needed to illuminate a sample when compared to laser scanning microscopes. Decreased excitation energy reduces photo-toxicity and photo-bleaching of a sample often making it the preferred system for imaging live cells or organisms.

Microlens enhanced or dual spinning disk confocal microscopes work under the same principles as spinning-disk confocal microscopes except a second spinning disk containing micro-lenses is placed before the spinning disk containing the pinholes. Every pinhole has an associated micro-lens. The micro-lenses act to capture a broad band of light and focus it into each pinhole significantly increasing the amount of light directed into each pinhole and reducing the amount of light blocked by the spinning disk. Microlens enhanced confocal microscopes are therefore significantly more sensitive than standard spinning disk systems. Yokogawa Electric invented this technology in 1992.

Programmable array microscopes (PAM) use an electronically controlled spatial light modulator (SLM) that produces a set of moving pinholes. The SLM is a device containing an array of pixels with some property (opacity, reflectivity or optical rotation) of the individual pixels that can be adjusted electronically. The SLM contains microelectromechanical mirrors or liquid crystal components. The image is usually acquired by a charge coupled device (CCD) camera.

Each of these classes of confocal microscope have particular advantages and disadvantages. Most systems are either optimized for recording speed (i.e. video capture) or high spatial resolution. Confocal laser scanning microscopes can have a programmable sampling density and very high resolutions while Nipkow and PAM use a fixed sampling density defined by the camera's resolution. Imaging frame rates are typically slower for single point laser scanning systems than spinning-disk or PAM systems. Commercial spinning-disk confocal microscopes achieve frame rates of over 50 per second – a desirable feature for dynamic observations such as live cell imaging.

In practice, Nipkow and PAM allow multiple pinholes scanning the same area in parallel as long as the pinholes are sufficiently far apart.

Cutting-edge development of confocal laser scanning microscopy now allows better than standard video rate (60 frames per second) imaging by using multiple microelectromechanical scanning mirrors.

Confocal X-ray fluorescence imaging is a newer technique that allows control over depth, in addition to horizontal and vertical aiming, for example, when analyzing buried layers in a painting.

Resolution enhancement

CLSM is a scanning imaging technique in which the resolution obtained is best explained by comparing it with another scanning technique like that of the scanning electron microscope (SEM). CLSM has the advantage of not requiring a probe to be suspended nanometers from the surface, as in an AFM or STM, for example, where the image is obtained by scanning with a fine tip over a surface. The distance from the objective lens to the surface (called the working distance) is typically comparable to that of a conventional optical microscope. It varies with the system optical design, but working distances from hundreds of micrometres to several millimeters are typical.

In CLSM a specimen is illuminated by a point laser source, and each volume element is associated with a discrete scattering or fluorescence intensity. Here, the size of the scanning volume is determined by the spot size (close to diffraction limit) of the optical system because the image of the scanning laser is not an infinitely small point but a three-dimensional diffraction pattern. The size of this diffraction pattern and the focal volume it defines is controlled by the numerical aperture of the system's objective lens and the wavelength of the laser used. This can be seen as the classical resolution limit of conventional optical microscopes using wide-field illumination. However, with confocal microscopy it is even possible to improve on the resolution limit of wide-field illumination techniques because the confocal aperture can be closed down to eliminate higher orders of the diffraction pattern. For example, if the pinhole diameter is set to 1 Airy unit then only the first order of the diffraction pattern makes it through the aperture to the detector while the higher orders are blocked, thus improving resolution at the cost of a slight decrease in brightness. In fluorescence observations, the resolution limit of confocal microscopy is often limited by the signal to noise ratio caused by the small number of photons typically available in fluorescence microscopy. One can compensate for this effect by using more sensitive photodetectors or by increasing the intensity of the illuminating laser point source. Increasing the intensity of illumination laser risks excessive bleaching or other damage to the specimen of interest, especially for experiments in which comparison of fluorescence brightness is required. When imaging tissues which are differentially refractive, such as the spongy mesophyll of plant leaves or other air-space containing tissues, spherical aberrations that impair confocal image quality are often pronounced. Such aberrations however, can be significantly reduced by mounting samples in optically transparent, non-toxic perfluorocarbons such as perfluorodecalin, which readily infiltrates tissues and has a refractive index almost identical to that of water [1].

Uses

CLSM is widely used in numerous biological science disciplines, from cell biology and genetics to microbiology and developmental biology. It is also used in quantum optics and nano-crystal imaging and spectroscopy.

Biology and medicine

Example of a stack of confocal microscope images showing the distribution of actin filaments throughout a cell.

Clinically, CLSM is used in the evaluation of various eye diseases, and is particularly useful for imaging, qualitative analysis, and quantification of endothelial cells of the cornea. It is used for localizing and identifying the presence of filamentary fungal elements in the corneal stroma in cases of keratomycosis, enabling rapid diagnosis and thereby early institution of definitive therapy. Research into CLSM techniques for endoscopic procedures (endomicroscopy) is also showing promise. In the pharmaceutical industry, it was recommended to follow the manufacturing process of thin film pharmaceutical forms, to control the quality and uniformity of the drug distribution.

Optics and crystallography

CLSM is used as the data retrieval mechanism in some 3D optical data storage systems and has helped determine the age of the Magdalen papyrus.

Variants and enhancements

Improving axial resolution

The point spread function of the pinhole is an ellipsoid, several times as long as it is wide. This limits the axial resolution of the microscope. One technique of overcoming this is 4π microscopy where incident and or emitted light are allowed to interfere from both above and below the sample to reduce the volume of the ellipsoid. An alternative technique is confocal theta microscopy. In this technique the cone of illuminating light and detected light are at an angle to each other (best results when they are perpendicular). The intersection of the two point spread functions gives a much smaller effective sample volume. From this evolved the single plane illumination microscope. Additionally deconvolution may be employed using an experimentally derived point spread function to remove the out of focus light, improving contrast in both the axial and lateral planes.

Super resolution

There are confocal variants that achieve resolution below the diffraction limit such as stimulated emission depletion microscopy (STED). Besides this technique a broad variety of other (not confocal based) super-resolution techniques is available like PALM, (d)STORM, SIM, and so on. They all have their own advantages like ease of use, resolution and the need for special equipment/buffers/fluorophores/... .

Low-temperature operability

To image samples at low temperature, two main approaches have been used, both based on the laser scanning confocal microscopy architecture. One approach is to use a continuous flow cryostat: only the sample is at low temperature and it is optically addressed through a transparent window. Another possible approach is to have part of the optics (especially the microscope objective) in a cryogenic storage dewar. This second approach, although more cumbersome, guarantees better mechanical stability and avoids the losses due to the window.

Images

• β-tubulin in Tetrahymena (a ciliated protozoan).

• Partial surface profile of a 1-Euro coin, measured with a Nipkow disk confocal microscope.

• Reflection data for 1-Euro coin.

• Cross section at y=200 through profile of 1-Euro coin.

• Colour coded image of actin filaments in a cancer cell.

• Green signal from anti-tubulin antibody conjugated with Alexa Fluor 488) and nuclei (blue signal from DNA stained with DAPI) in root meristem cells 4-day old Arabidopsis thaliana (Col-0). Scale bar: 5 um.
  

History

The beginnings: 1940–1957

Scheme from Minsky's patent application showing the principle of the transmission confocal scanning microscope he built.

In 1940 Hans Goldmann, ophthalmologist in Bern, Switzerland, developed a slit lamp system to document eye examinations. This system is considered by some later authors as the first confocal optical system.

In 1943 Zyun Koana published a confocal system. A figure in this publication clearly shows a confocal transmission beam path. In 1951 Hiroto Naora, a colleague of Koana, described a confocal microscope in the journal Science for spectrophotometry.

The first confocal scanning microscope was built by Marvin Minsky in 1955 and a patent was filed in 1957. The scanning of the illumination point in the focal plane was achieved by moving the stage. No scientific publication was submitted and no images made with it were preserved.

The Tandem-Scanning-Microscope

Scheme of Petráň's Tandem-Scanning-Microscope. Red bar added to indicate the Nipkow-Disk.

In the 1960s, the Czechoslovak Mojmír Petráň from the Medical Faculty of the Charles University in Plzeň developed the Tandem-Scanning-Microscope, the first commercialized confocal microscope. It was sold by a small company in Czechoslovakia and in the United States by Tracor-Northern (later Noran) and used a rotating Nipkow disk to generate multiple excitation and emission pinholes.

The Czechoslovak patent was filed 1966 by Petráň and Milan Hadravský, a Czechoslovak coworker. A first scientific publication with data and images generated with this microscope was published in the journal Science in 1967, authored by M. David Egger from Yale University and Petráň. As a footnote to this paper it is mentioned that Petráň designed the microscope and supervised its construction and that he was, in part, a "research associate" at Yale. A second publication from 1968 described the theory and the technical details of the instrument and had Hadravský and Robert Galambos, the head of the group at Yale, as additional authors. In 1970 the US patent was granted. It was filed in 1967.

1969: The first confocal laser scanning microscope

In 1969 and 1971, M. David Egger and Paul Davidovits from Yale University, published two papers describing the first confocal laser scanning microscope. It was a point scanner, meaning just one illumination spot was generated. It used epi-Illumination-reflection microscopy for the observation of nerve tissue. A 5 mW Helium-Neon-Laser with 633 nm light was reflected by a semi-transparent mirror towards the objective. The objective was a simple lens with a focal length of 8.5 mm. As opposed to all earlier and most later systems, the sample was scanned by movement of this lens (objective scanning), leading to a movement of the focal point. Reflected light came back to the semitransparent mirror, the transmitted part was focused by another lens on the detection pinhole behind which a photomultiplier tube was placed. The signal was visualized by a CRT of an oscilloscope, the cathode ray was moved simultaneously with the objective. A special device allowed to make Polaroid photos, three of which were shown in the 1971 publication.

The authors speculate about fluorescent dyes for in vivo investigations. They cite Minsky‘s patent, thank Steve Baer, at the time a doctoral student at the Albert Einstein School of Medicine in New York City where he developed a confocal line scanning microscope, for suggesting to use a laser with ‚Minsky‘s microscope‘ and thank Galambos, Hadravsky and Petráň for discussions leading to the development of their microscope. The motivation for their development was that in the Tandem-Scanning-Microscope only a fraction of 10⁻⁷ of the illumination light participates in generating the image in the eye piece. Thus, image quality was not sufficient for most biological investigations.

1977–1985: point scanners with lasers and stage scanning

In 1977 Colin J. R. Sheppard and Amarjyoti Choudhury, Oxford, UK, published a theoretical analysis of confocal and laser-scanning microscopes. It is probably the first publication using the term "confocal microscope".

In 1978, the brothers Christoph Cremer and Thomas Cremer published a design for a confocal laser-scanning-microscope using fluorescent excitation with electronic autofocus. They also suggested a laser point illumination by using a „4π-point-hologramme“. This CLSM design combined the laser scanning method with the 3D detection of biological objects labeled with fluorescent markers for the first time.

In 1978 and 1980, the Oxford-group around Colin Sheppard and Tony Wilson described a confocal with epi-laser-illumination, stage scanning and photomultiplier tubes as detectors. The stage could move along the optical axis, allowing optical serial sections.

In 1979 Fred Brakenhoff and coworkers demonstrated that the theoretical advantages of optical sectioning and resolution improvement are indeed achievable in practice. In 1985 this group became the first to publish convincing images taken on a confocal microscope that were able to answer biological questions. Shortly after many more groups started using confocal microscopy to answer scientific questions that until now had remained a mystery due to technological limitations.

In 1983 I. J. Cox und C. Sheppard from Oxford published the first work whereby a confocal microscope was controlled by a computer. The first commercial laser scanning microscope, the stage-scanner SOM-25 was offered by Oxford Optoelectronics (after several take-overs acquired by BioRad) starting in 1982. It was based on the design of the Oxford group.

Starting 1985: Laser point scanners with beam scanning

In the mid-1980s, William Bradshaw Amos and John Graham White and colleagues working at the Laboratory of Molecular Biology in Cambridge built the first confocal beam scanning microscope. The stage with the sample was not moving, instead the illumination spot was, allowing faster image acquisition: four images per second with 512 lines each. Hugely magnified intermediate images, due to a 1-2 meter long beam path, allowed the use of a conventional iris diaphragm as a ‘pinhole’, with diameters ~ 1 mm. First micrographs were taken with long-term exposure on film before a digital camera was added. A further improvement allowed zooming into the preparation for the first time. Zeiss, Leitz and Cambridge Instruments had no interest in a commercial production. The Medical Research Council (MRC) finally sponsored development of a prototype. The design was acquired by Bio-Rad, amended with computer control and commercialized as ‘MRC 500’. The successor MRC 600 was later the basis for the development of the first two-photon-fluorescent microscope developed 1990 at Cornell University.

Developments at the University of Stockholm around the same time led to a commercial clsm distributed by the Swedish company Sarastro. The venture was acquired in 1990 by Molecular Dynamics, but the clsm was eventually discontinued. In Germany, Heidelberg Instruments, founded in 1984, developed a clsm which was initially meant for industrial applications, rather than Biology. This instrument was taken over in 1990 by Leica Lasertechnik. Zeiss already had a non-confocal flying-spot laser scanning microscope on the market which was upgraded to a confocal. A report from 1990, mentioning “some” manufacturers of confocals lists: Sarastro, Technical Instrument, Meridian Instruments, Bio-Rad, Leica, Tracor-Northern and Zeiss.

In 1989, Fritz Karl Preikschat, with son Ekhard Preikschat, invented the scanning laser diode microscope for particle-size analysis. He and Ekhard Preikschat co-founded Lasentec to commercialize it. In 2001, Lasentec was acquired by Mettler Toledo (NYSE: MTD). About ten thousand systems have been installed globally, mostly in the pharmaceutical industry to provide in-situ control of the crystallization process in large purification systems.

See also

• Deconvolution
• Fluorescence microscope
• Laser scanning confocal microscopy
• Live cell imaging
• Microscope objective lens
• Microscope slide
• Optical microscope
• Optical sectioning
• Photodetector
• Point spread function
• Stimulated emission depletion microscope
• Super-resolution microscopy

• Two-photon excitation microscopy: Although they use a related technology (both are laser scanning microscopes), multiphoton fluorescence microscopes are not strictly confocal microscopes. The term confocal arises from the presence of a diaphragm in the conjugated focal plane (confocal). This diaphragm is usually absent in multiphoton microscopes.
• Total internal reflection fluorescence microscope (TIRF)

External links

• Virtual CLSM (Java-based)
• animations and explanations on various types of microscopes including fluorescent and confocal microscopes. (Université Paris Sud)

Library resources about Confocal microscopy

Resources in your library Resources in other libraries

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

• 1. 外耳道異物の診断およびマネージメント diagnosis and management of foreign bodies of the outer ear
• 2. 成人における慢性中耳炎、真珠腫、および乳様突起炎 chronic otitis media cholesteatoma and mastoiditis in adults
• 3. 小児に対する中耳腔換気用チューブ留置、術後ケア、および合併症の概要 overview of tympanostomy tube placement postoperative care and complications in children
• 4. 小児における真珠腫 cholesteatoma in children
• 5. 成人における急性中耳炎（化膿性および漿液性） acute otitis media in adults suppurative and serous

English Journal

• Understanding droplet bridging in ionic liquid-based Pickering emulsions.

• Frost DS, Schoepf JJ, Nofen EM, Dai LL.SourceSchool for Engineering of Matter, Transport, and Energy, Arizona State University, Tempe, AZ 85287, United States.
• Journal of colloid and interface science.J Colloid Interface Sci.2012 Oct 1;383(1):103-9. Epub 2012 Jun 15.
• We have studied the unique bridging behavior of solid-stabilized oil-in-ionic liquid (IL) and water-in-ionic liquid emulsions with respect to particle concentration, particle size, and droplet phase using a confocal laser scanning microscope. The emulsions exhibited three morphology regimes: (1) sin
• PMID 22795038

• Construction of EGFP-Labeling System for Visualizing the Infection Process of Xanthomonas axonopodis pv. citri in planta.

• Liu LP, Deng ZN, Qu JW, Yan JW, Catara V, Li DZ, Long GY, Li N.SourceNational Center for Citrus Improvement, Hunan Agricultural University, Changsha, 410128, Hunan, China, llp31302@163.com.
• Current microbiology.Curr Microbiol.2012 Sep;65(3):304-12. Epub 2012 Jun 7.
• Xanthomonas axonopodis pv. citri (Xac) is the causal agent of citrus bacterial canker, an economically important disease to world citrus industry. To monitor the infection process of Xac in different citrus plants, the enhanced green florescent protein (EGFP) visualizing system was constructed to vi
• PMID 22674174

Japanese Journal

• Construction of an Aptamer Modified Liposomal System Targeted to Tumor Endothelial Cells

• Ara Mst Naznin,Matsuda Takashi,Hyodo Mamoru,Sakurai Yu,Ohga Noritaka,Hida Kyoko,Harashima Hideyoshi
• Biological & pharmaceutical bulletin 37(11), 1742-1749, 2014-11
• … A confocal laser scanning microscope (CLSM) uptake study indicated that the ALPs were taken up more efficiently than PLPs. …
• NAID 120005522336

• 糸球体毛細血管網における立体構造再構築方法の検討

• 直良 博之
• 島根県立大学短期大学部松江キャンパス研究紀要 52, 169-173, 2014-03-31
• NAID 110009758302

• 共焦点レーザー顕微鏡を用いた3D教材の開発

• トクノ ヨウコ,イシダ マサキ,徳野 陽子,石田 正樹,TOKUNO Youko,ISHIDA Masaki
• 奈良教育大学自然環境教育センター紀要 15, 35-43, 2014-03-20
• 本研究では、中学校理科の教科書で扱われる「生物」に関連した内容に着目し、3D教材を作成した。教科書に登場する生物の写真や模式図は、それ自体美しいものではあるが、写真が提供する情報は2次元的なものであり、生物の厚みやそれぞれの詳細な構造のつながりを立体的に理解することは難しい。生物の構造を理解することは、その機能を理解する上で非常に大切なことは疑うべくもないが、このことを授業や実験で示すことは、実際 …
• NAID 120005438829

Related Links

• Laser Scanning Microscope - Confocal Microscope

Non-contact laser scanning microscope that combines the image analysis of an SEM with the surface analysis of a roughness gauge and optical microscope. ... VK-X 3D Laser Scanning Microscope The VK-X Series 3D Laser ...

• Laser Scan Confocal Microscope Technology for Confocal ...

A confocal microscope scans a sample sequentially point by point and line by line to create an image. Objects acquired by confocal microscopy show high contrast and high resolution in x, y and z axis. Laser scanning products by ...

Related Pictures

---

★リンクテーブル★

リンク元	「共焦点レーザー走査顕微鏡」「confocal laser scanning microscopy」「共焦点レーザー顕微鏡」「共焦点レーザー走査型顕微鏡」
関連記事	「microscope」「scanning」

「共焦点レーザー走査顕微鏡」

　　[★]

英

(方法)confocal laser scanning microscopy、(道具)confocal laser scanning microscope

関

共焦点レーザー顕微鏡、共焦点レーザー走査型顕微鏡、共焦点レーザー走査顕微鏡観察、共焦点レーザー走査顕微鏡法、共焦点レーザー走査顕微法

「confocal laser scanning microscopy」

　　[★]

共焦点レーザー走査顕微鏡、共焦点レーザー走査顕微鏡観察、共焦点レーザー走査顕微鏡法、共焦点レーザー走査顕微法

関

confocal laser scanning microscope、confocal microscopy、laser scanning confocal microscopy、laser scanning microscopy

「共焦点レーザー顕微鏡」

　　[★]

英

confocal laser scanning microscope

関

共焦点レーザー走査型顕微鏡、共焦点レーザー走査顕微鏡

「共焦点レーザー走査型顕微鏡」

　　[★]

英

confocal laser scanning microscope

関

共焦点レーザー顕微鏡、共焦点レーザー走査顕微鏡

「microscope」

　　[★]

• n.

• (道具)顕微鏡

関

microscopic、microscopical、microscopy

　 　

「scanning」

　　[★]

• n.

• 走査、走査型の、スキャニング

関

scan