adj.

コロイド性の、コロイドの、膠質の、膠様の

関: colloid、colloides、mucinous

WordNet

of or relating to or having the properties of a colloid
relating to or containing mucin
in a colloidal manner; "particles were colloidally dispersed in the medium"
a mixture with properties between those of a solution and fine suspension

PrepTutorEJDIC

コロイド状の
にわか質の,ころいど性の / コロイド,膠(こう)質

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2014/03/12 21:40:59」(JST)

wiki en

[Wiki en表示]

Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

A colloid is a substance microscopically dispersed throughout another substance.^[1]

The dispersed-phase particles have a diameter of between approximately 1 and 1000 nanometers.^[2] Such particles are normally easily visible in an optical microscope, although at the smaller size range (r<250nm), an ultramicroscope or an electron microscope may be required. Homogeneous mixtures with a dispersed phase in this size range may be called colloidal aerosols, colloidal emulsions, colloidal foams, colloidal dispersions, or hydrosols. The dispersed-phase particles or droplets are affected largely by the surface chemistry present in the colloid.

Some colloids are translucent because of the Tyndall effect, which is the scattering of light by particles in the colloid. Other colloids may be opaque or have a slight color.

Colloidal solutions (also called colloidal suspensions) are the subject of interface and colloid science. This field of study was introduced in 1861 by Scottish scientist Thomas Graham.

IUPAC definition

Colloid: Short synonym for colloidal system.^[3]^[4]

Colloidal: State of subdivision such that the molecules or polymolecular
particles dispersed in a medium have at least one dimension between
approximately 1 nm and 1 μm, or that in a system discontinuities are found
at distances of that order.^[3]^[4]^[5]

1 Classification
2 Hydrocolloids
3 Interaction between particles
4 Preparation
5 Stabilization (peptization)
6 Destabilization (flocculation)
- 6.1 Monitoring stability
- 6.2 Accelerating methods for shelf life prediction
7 As a model system for atoms
8 Crystals
9 In biology
10 In the environment
11 Intravenous therapy
12 See also
13 References
14 Further reading

Classification[edit]

Because the size of the dispersed phase may be difficult to measure, and because colloids have the appearance of solutions, colloids are sometimes identified and characterized by their physico-chemical and transport properties. For example, if a colloid consists of a solid phase dispersed in a liquid, the solid particles will not diffuse through a membrane, whereas with a true solution the dissolved ions or molecules will diffuse through a membrane. Because of the size exclusion, the colloidal particles are unable to pass through the pores of an ultrafiltration membrane with a size smaller than their own dimension. The smaller the size of the pore of the ultrafiltration membrane, the lower the concentration of the dispersed colloidal particles remaining in the ultrafiltered liquid. The exact value of the concentration of a truly dissolved species will thus depend on the experimental conditions applied to separate it from the colloidal particles also dispersed in the liquid. This is particularly important for solubility studies of readily hydrolysed species such as Al, Eu, Am, Cm, or organic matter complexing these species. Colloids can be classified as follows:

Medium/phase		Dispersed phase
Medium/phase		Gas	Liquid	Solid
Dispersion medium	Gas	None All gases are miscible and thus do not form colloids	Liquid aerosol Examples: fog, hair sprays	Solid aerosol Examples: smoke, ice cloud, air particulates
	Liquid	Foam Example: whipped cream, shaving cream	Emulsion Examples: milk, mayonnaise, hand cream	Sol Examples: pigmented ink, blood
	Solid	Solid foam Examples: aerogel, styrofoam, pumice	Gel Examples: agar, gelatin, jelly	Solid sol Example: cranberry glass

Based on the nature of interaction between the dispersed phase and the dispersion medium, colloids can be classified as: Hydrophilic colloids: These are water-loving colloids.The colloid particles are attracted toward water. They are also called reversible sols. Hydrophobic colloids: These are opposite in nature to hydrophilic colloids. The colloid particles are repelled by water. They are also called irreversible sols.

In some cases, a colloid can be considered a homogeneous mixture. This is because the distinction between "dissolved" and "particulate" matter can be sometimes a matter of approach, which affects whether or not it is homogeneous or heterogeneous.

Hydrocolloids[edit]

A hydrocolloid is defined as a colloid system wherein the colloid particles are hydrophilic polymers dispersed in water. A hydrocolloid has colloid particles spread throughout water, and depending on the quantity of water available that can take place in different states, e.g., gel or sol (liquid). Hydrocolloids can be either irreversible (single-state) or reversible. For example, agar, a reversible hydrocolloid of seaweed extract, can exist in a gel and solid state, and alternate between states with the addition or elimination of heat.

Many hydrocolloids are derived from natural sources. For example, agar-agar and carrageenan are extracted from seaweed, gelatin is produced by hydrolysis of proteins of bovine and fish origins, and pectin is extracted from citrus peel and apple pomace.

Gelatin desserts like jelly or Jell-O are made from gelatin powder, another effective hydrocolloid. Hydrocolloids are employed in food mainly to influence texture or viscosity (e.g., a sauce). Hydrocolloid-based medical dressings are used for skin and wound treatment.

Other main hydrocolloids are xanthan gum, gum arabic, guar gum, locust bean gum, cellulose derivatives as carboxymethyl cellulose, alginate and starch.

Based on the nature of interaction between the dispersed phase and the dispersion medium, colloids can be classified as: Hydrophilic colloids: These are water-loving colloids.The colloid particles are attracted toward water. They are also called reversible sols. Hydrophobic colloids: These are opposite in nature to hydrophilic colloids. The colloid particles are repelled by water. They are also called irreversible sols.

Interaction between particles[edit]

The following forces play an important role in the interaction of colloid particles:

Excluded volume repulsion: This refers to the impossibility of any overlap between hard particles.
Electrostatic interaction: Colloidal particles often carry an electrical charge and therefore attract or repel each other. The charge of both the continuous and the dispersed phase, as well as the mobility of the phases are factors affecting this interaction.
van der Waals forces: This is due to interaction between two dipoles that are either permanent or induced. Even if the particles do not have a permanent dipole, fluctuations of the electron density gives rise to a temporary dipole in a particle. This temporary dipole induces a dipole in particles nearby. The temporary dipole and the induced dipoles are then attracted to each other. This is known as van der Waals force, and is always present (unless the refractive indexes of the dispersed and continuous phases are matched), is short-range, and is attractive.
Entropic forces: According to the second law of thermodynamics, a system progresses to a state in which entropy is maximized. This can result in effective forces even between hard spheres.
Steric forces between polymer-covered surfaces or in solutions containing non-adsorbing polymer can modulate interparticle forces, producing an additional steric repulsive force (which is predominantly entropic in origin) or an attractive depletion force between them. Such an effect is specifically searched for with tailor-made superplasticizers developed to increase the workability of concrete and to reduce its water content.

Preparation[edit]

There are two principal ways of preparation of colloids:^[6]

Dispersion of large particles or droplets to the colloidal dimensions by milling, spraying, or application of shear (e.g., shaking, mixing, or high shear mixing).
Condensation of small dissolved molecules into larger colloidal particles by precipitation, condensation, or redox reactions. Such processes are used in the preparation of colloidal silica or gold.

Stabilization (peptization)[edit]

The stability of a colloidal system is defined by particles remaining suspended in solution at equilibrium.

Stability is hindered by aggregation and sedimentation phenomena, which are driven by the colloids tendency to reduce surface energy. Reducing the interfacial tension will stabilize the colloidal system by reducing this driving force.

Examples of a stable and of an unstable colloidal dispersion.

Aggregation is due to the sum of the interaction forces between particles.^[7]^[8] If attractive forces (such as van der Waals forces) prevail over the repulsive ones (such as the electrostatic ones) particles aggregate in clusters.

Electrostatic stabilization and steric stabilization are the two main mechanisms for stabilization against aggregation.

Electrostatic stabilization is based on the mutual repulsion of like electrical charges. In general, different phases have different charge affinities, so that an electrical double layer forms at any interface. Small particle sizes lead to enormous surface areas, and this effect is greatly amplified in colloids. In a stable colloid, mass of a dispersed phase is so low that its buoyancy or kinetic energy is too weak to overcome the electrostatic repulsion between charged layers of the dispersing phase.
Steric stabilization consists in covering the particles in polymers which prevents the particle to get close in the range of attractive forces.

A combination of the two mechanisms is also possible (electrosteric stabilization). All the above mentioned mechanisms for minimizing particle aggregation rely on the enhancement of the repulsive interaction forces.

Electrostatic and steric stabilization do not directly address the sedimentation/floating problem.

Particle sedimentation (and also floating, although this phenomenon is less common) arises from a difference in the density of the dispersed and of the continuous phase. The higher the difference in densities, the faster the particle settling.

The gel network stabilization represents the principal way to produce colloids stable to both aggregation and sedimentation.^[9]^[10]

The method consists in adding to the colloidal suspension a polymer able to form a gel network and characterized by shear thinning properties. Examples of such substances are xanthan and guar gum.

Steric and Gel network stabilization.

Particle settling is hindered by the stiffness of the polymeric matrix where particles are trapped.^[9] In addition, the long polymeric chains can provide a steric or electrosteric stabilization to dispersed particles.

The rheological shear thinning properties find beneficial in the preparation of the suspensions and in their use, as the reduced viscosity at high shear rates facilitates deagglomeration, mixing and in general the flow of the suspensions.

Destabilization (flocculation)[edit]

Unstable colloidal dispersions can form flocs as the particles aggregate due to interparticle attractions. In this way photonic glasses can be grown. This can be accomplished by a number of different methods:

Removal of the electrostatic barrier that prevents aggregation of the particles. This can be accomplished by the addition of salt to a suspension or changing the pH of a suspension to effectively neutralize or "screen" the surface charge of the particles in suspension. This removes the repulsive forces that keep colloidal particles separate and allows for coagulation due to van der Waals forces.
Addition of a charged polymer flocculant. Polymer flocculants can bridge individual colloidal particles by attractive electrostatic interactions. For example, negatively-charged colloidal silica or clay particles can be flocculated by the addition of a positively-charged polymer.
Addition of non-adsorbed polymers called depletants that cause aggregation due to entropic effects.
Physical deformation of the particle (e.g., stretching) may increase the van der Waals forces more than stabilization forces (such as electrostatic), resulting coagulation of colloids at certain orientations.

Unstable colloidal suspensions of low-volume fraction form clustered liquid suspensions, wherein individual clusters of particles fall to the bottom of the suspension (or float to the top if the particles are less dense than the suspending medium) once the clusters are of sufficient size for the Brownian forces that work to keep the particles in suspension to be overcome by gravitational forces. However, colloidal suspensions of higher-volume fraction form colloidal gels with viscoelastic properties. Viscoelastic colloidal gels, such as bentonite and toothpaste, flow like liquids under shear, but maintain their shape when shear is removed. It is for this reason that toothpaste can be squeezed from a toothpaste tube, but stays on the toothbrush after it is applied.

Monitoring stability[edit]

Measurement principle of multiple light scattering coupled with vertical scanning

Multiple light scattering coupled with vertical scanning is the most widely used technique to monitor the dispersion state of a product, hence identifying and quantifying destabilisation phenomena.^[11]^[12]^[13]^[14] It works on concentrated dispersions without dilution. When light is sent through the sample, it is backscattered by the particles / droplets. The backscattering intensity is directly proportional to the size and volume fraction of the dispersed phase. Therefore, local changes in concentration (e.g.Creaming and Sedimentation) and global changes in size (e.g. flocculation, coalescence) are detected and monitored.

Accelerating methods for shelf life prediction[edit]

The kinetic process of destabilisation can be rather long (up to several months or even years for some products) and it is often required for the formulator to use further accelerating methods in order to reach reasonable development time for new product design. Thermal methods are the most commonly used and consists in increasing temperature to accelerate destabilisation (below critical temperatures of phase inversion or chemical degradation). Temperature affects not only the viscosity, but also interfacial tension in the case of non-ionic surfactants or more generally interactions forces inside the system. Storing a dispersion at high temperatures enables to simulate real life conditions for a product (e.g. tube of sunscreen cream in a car in the summer), but also to accelerate destabilisation processes up to 200 times. Mechanical acceleration including vibration, centrifugation and agitation are sometimes used. They subject the product to different forces that pushes the particles / droplets against one another, hence helping in the film drainage. However, some emulsions would never coalesce in normal gravity, while they do under artificial gravity.^[15] Moreover segregation of different populations of particles have been highlighted when using centrifugation and vibration.^[16]

As a model system for atoms[edit]

In physics, colloids are an interesting model system for atoms. Micrometre-scale colloidal particles are large enough to be observed by optical techniques such as confocal microscopy. Many of the forces that govern the structure and behavior of matter, such as excluded volume interactions or electrostatic forces, govern the structure and behavior of colloidal suspensions. For example, the same techniques used to model ideal gases can be applied to model the behavior of a hard sphere colloidal suspension. In addition, phase transitions in colloidal suspensions can be studied in real time using optical techniques,^[17] and are analogous to phase transitions in liquids. In many interesting cases optical fluidity is used to control colloid suspensions.^[17]^[18]

Crystals[edit]

Main article: Colloidal crystal

A colloidal crystal is a highly ordered array of particles that can be formed over a very long range (typically on the order of a few millimeters to one centimeter) and that appear analogous to their atomic or molecular counterparts.^[19] One of the finest natural examples of this ordering phenomenon can be found in precious opal, in which brilliant regions of pure spectral color result from close-packed domains of amorphous colloidal spheres of silicon dioxide (or silica, SiO₂).^[20]^[21] These spherical particles precipitate in highly siliceous pools in Australia and elsewhere, and form these highly ordered arrays after years of sedimentation and compression under hydrostatic and gravitational forces. The periodic arrays of submicrometre spherical particles provide similar arrays of interstitial voids, which act as a natural diffraction grating for visible light waves, particularly when the interstitial spacing is of the same order of magnitude as the incident lightwave.^[22]^[23]

Thus, it has been known for many years that, due to repulsive Coulombic interactions, electrically charged macromolecules in an aqueous environment can exhibit long-range crystal-like correlations with interparticle separation distances, often being considerably greater than the individual particle diameter. In all of these cases in nature, the same brilliant iridescence (or play of colors) can be attributed to the diffraction and constructive interference of visible lightwaves that satisfy Bragg’s law, in a matter analogous to the scattering of X-rays in crystalline solids.

The large number of experiments exploring the physics and chemistry of these so-called "colloidal crystals" has emerged as a result of the relatively simple methods that have evolved in the last 20 years for preparing synthetic monodisperse colloids (both polymer and mineral) and, through various mechanisms, implementing and preserving their long-range order formation.

In biology[edit]

In the early 20th century, before enzymology was well understood, colloids were thought to be the key to the operation of enzymes; i.e., the addition of small quantities of an enzyme to a quantity of water would, in some fashion yet to be specified, subtly alter the properties of the water so that it would break down the enzyme's specific substrate,^{[citation needed]} such as a solution of ATPase breaking down ATP. Furthermore, life itself was explainable in terms of the aggregate properties of all the colloidal substances that make up an organism. As more detailed knowledge of biology and biochemistry developed, the colloidal theory was replaced by the macromolecular theory, which explains an enzyme as a collection of identical huge molecules that act as very tiny machines, freely moving about between the water molecules of the solution and individually operating on the substrate, no more mysterious than a factory full of machinery. The properties of the water in the solution are not altered, other than the simple osmotic changes that would be caused by the presence of any solute. In humans, both the thyroid gland and the intermediate lobe (pars intermedia) of the pituitary gland contain colloid follicles.

In the environment[edit]

Colloidal particles can also serve as transport vector^[24] of diverse contaminants in the surface water (sea water, lakes, rivers, fresh water bodies) and in underground water circulating in fissured rocks^[25] (limestone, sandstone, granite, ...). Radionuclides and heavy metals easily sorb onto colloids suspended in water. Various types of colloids are recognised: inorganic colloids (clay particles, silicates, iron oxy-hydroxides, ...), organic colloids (humic and fulvic substances). When heavy metals or radionuclides form their own pure colloids, the term "Eigencolloid" is used to designate pure phases, e.g., Tc(OH)₄, U(OH)₄, Am(OH)₃. Colloids have been suspected for the long-range transport of plutonium on the Nevada Nuclear Test Site. They have been the subject of detailed studies for many years. However, the mobility of inorganic colloids is very low in compacted bentonites and in deep clay formations^[26] because of the process of ultrafiltration occurring in dense clay membrane.^[27] The question is less clear for small organic colloids often mixed in porewater with truly dissolved organic molecules.^[28]

Intravenous therapy[edit]

Colloid solutions used in intravenous therapy belong to a major group of volume expanders, and can be used for intravenous fluid replacement. Colloids preserve a high colloid osmotic pressure in the blood,^[29] and therefore, they should theoretically preferentially increases the intravascular volume, whereas other types of volume expanders called crystalloids also increases the interstitial volume and intracellular volume. However, there is still controversy to the actual difference in efficacy by this difference.^[29] Another difference is that crystalloids generally are much cheaper than colloids.^[29] Recently, however, it has been determined that the use of colloids was bolstered by faked research studies.^[30]^{[clarification needed]}

References[edit]

^ "Colloid". Britannica Online Encyclopedia. Retrieved 31 August 2009.
^ Levine, Ira N. (2001). Physical Chemistry (5th ed.). Boston: McGraw-Hill. ISBN 0-07-231808-2. , p. 955
^ ^a ^b Richard G. Jones, Edward S. Wilks, W. Val Metanomski, Jaroslav Kahovec, Michael Hess, Robert Stepto, Tatsuki Kitayama, ed. (2009). Compendium of Polymer Terminology and Nomenclature (IUPAC Recommendations 2008) (2nd Ed. ed.). RSC Publ. p. 464. ISBN 978-0-85404-491-7.
^ ^a ^b "Dispersity in polymer science (IUPAC Recommendations 2009)". Pure and Applied Chemistry 81 (2): 351–353. 2009. doi:10.1351/PAC-REC-08-05-02.
^ "Terminology of polymers
and polymerization processes in dispersed systems (IUPAC Recommendations 2011)". Pure and Applied Chemistry 83 (12). 2011. doi:10.1351/PAC-REC-10-06-03.
^ http://www.substech.com/dokuwiki/doku.php?id=preparation_of_colloids
^ Israelachvili, Jacob N. (1991). Intermolecular and Surface Forces. Academic Press. ISBN 978-0-12-391927-4.
^ Menachem Elimelech, John Gregory, Xiadong Jia, Richard Williams (1998). Particle deposition and aggregation: measurement, modelling and simulation. Butterworth-Heinemann. ISBN 0-7506-7024-X.
^ ^a ^b Comba, Silvia; Sethi (August 2009). "Stabilization of highly concentrated suspensions of iron nanoparticles using shear-thinning gels of xanthan gum". Water Research 43 (15): 3717–3726. doi:10.1016/j.watres.2009.05.046. Cite uses deprecated parameters (help)
^ Cantrell, K.J.; Kaplan, D.I., Gilmore, T.J. (1997). "Injection of colloidal Fe-0 particles in sand with shear-thinning fluids". Journal of Environmental Engineering-Asce 123 (8): 786–791. doi:10.1061/(ASCE)0733-9372(1997)123:8(786). Cite uses deprecated parameters (help)
^ Roland, I; Piel, G; Delattre, L; Evrard, B (2003). "Systematic characterization of oil-in-water emulsions for formulation design". International Journal of Pharmaceutics 263 (1–2): 85–94. doi:10.1016/S0378-5173(03)00364-8. PMID 12954183.
^ Lemarchand, Caroline; Couvreur, Patrick; Besnard, Madeleine; Costantini, Dominique; Gref, Ruxandra (2003). "Novel polyester-polysaccharide nanoparticles". Pharmaceutical Research 20 (8): 1284–92. doi:10.1023/A:1025017502379. PMID 12948027.
^ Mengual, O (1999). "Characterisation of instability of concentrated dispersions by a new optical analyser: the TURBISCAN MA 1000". Colloids and Surfaces A: Physicochemical and Engineering Aspects 152: 111. doi:10.1016/S0927-7757(98)00680-3.
^ P. Bru et al. (2004). T. Provder and J. Texter, ed. Particle sizing and characterisation.
^ J-L Salager (2000). Françoise Nielloud,Gilberte Marti-Mestres, ed. Pharmaceutical emulsions and suspensions. CRC press. p. 89. ISBN 0-8247-0304-9.
^ Snabre, Patrick; Pouligny, Bernard (2008). "Size Segregation in a Fluid-like or Gel-like Suspension Settling under Gravity or in a Centrifuge". Langmuir 24 (23): 13338–47. doi:10.1021/la802459u. PMID 18986182.
^ ^a ^b Greenfield, Elad; Nemirovsky, Jonathan and El-Ganainy, Ramy and Christodoulides, Demetri N and Segev, Mordechai (2013). "Shockwave based nonlinear optical manipulation in densely scattering opaque suspensions". Optics Express 21 (20): 23785–23802. doi:10.1364/OE.21.023785. PMID 24104290. Cite uses deprecated parameters (help)
^ Greenfield, Elad; Rotschild, Carmel and Szameit, Alexander and Nemirovsky, Jonathan and El-Ganainy, Ramy and Christodoulides, Demetrios N and Saraf, Meirav and Lifshitz, Efrat and Segev, Mordechai (2011). "Light-induced self-synchronizing flow patterns". New Journal of Physics 13 (5): 053021. doi:10.1088/1367-2630/13/5/053021. Cite uses deprecated parameters (help)
^ Pieranski, P. (1983). "Colloidal Crystals". Contemporary Physics 24: 25. Bibcode:1983ConPh..24...25P. doi:10.1080/00107518308227471.
^ Sanders, J.V.; Sanders, J. V.; Segnit, E. R. (1964). "Structure of Opal". Nature 204 (4962): 1151. Bibcode:1964Natur.204..990J. doi:10.1038/204990a0.
^ Darragh, P.J., et al. (1976). Scientific American 234: 84.
^ Luck, W. et al. (1963). "Ber. Busenges". Phys. Chem. 67: 84.
^ Hiltner, P.A. and Krieger, I.M. (1969). "Diffraction of light by ordered suspensions". J. Phys. Chem. 73 (7): 2306. doi:10.1021/j100727a049.
^ Frimmel, Fritz H.; Frank von der Kammer, Hans-Curt Flemming (2007). Colloidal transport in porous media (1 ed.). Springer. p. 292. ISBN 3-540-71338-7. Cite uses deprecated parameters (help)
^ Alonso, U.; T. Missana, A. Patelli, V. Rigato (2007). "Bentonite colloid diffusion through the host rock of a deep geological repository". Physics and Chemistry of the Earth, Parts A/B/C 32 (1–7): 469–476. Bibcode:2007PCE....32..469A. doi:10.1016/j.pce.2006.04.021. ISSN 1474-7065. Cite uses deprecated parameters (help)
^ Voegelin, A.; Kretzschmar, R. (December 2002). Stability and mobility of colloids in Opalinus Clay.. Nagra Technical Report 02-14. Institute of Terrestrial Ecology, ETH Zürich. p. 47. ISSN 1015-2636.
^ "Diffusion of colloids in compacted bentonite". Retrieved 12 February 2009.
^ Wold, Susanna; Trygve Eriksen (2007). "Diffusion of humic colloids in compacted bentonite". Physics and Chemistry of the Earth, Parts A/B/C 32 (1–7): 477–484. Bibcode:2007PCE....32..477W. doi:10.1016/j.pce.2006.05.002. ISSN 1474-7065. Cite uses deprecated parameters (help)
^ ^a ^b ^c An Update on Intravenous Fluids by Gregory S. Martin, MD, MSc
^ Millions of surgery patients at risk in drug research fraud scandal, The Telegraph, 4 November 2011

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

1. ウイルス性髄膜炎：小児における疫学、病因、および病因 viral meningitis epidemiology pathogenesis and etiology in children
2. 外陰部病変の鑑別診断 differential diagnosis of vulvar lesions
3. 抗潰瘍剤の薬理学 pharmacology of antiulcer medications
4. 分化型甲状腺癌に対する中心領域および側頸部のリンパ節郭清（頸部郭清） central and lateral compartment lymphadenectomy neck dissection for differentiated thyroid cancer
5. コントラスト心エコー検査：造影剤、安全性、およびイメージング技術 contrast echocardiography contrast agents safety and imaging technique

English Journal

Merging colloidal nanoplasmonics and surface plasmon resonance spectroscopy for enhanced profiling of multiple myeloma-derived exosomes.

Di Noto G1, Bugatti A2, Zendrini A2, Mazzoldi EL2, Montanelli A3, Caimi L2, Rusnati M2, Ricotta D2, Bergese P4.
Biosensors & bioelectronics.Biosens Bioelectron.2016 Mar 15;77:518-24. doi: 10.1016/j.bios.2015.09.061. Epub 2015 Oct 3.
A novel approach for sorting exosomes from multiple myeloma (MM), monoclonal gammopathy of undetermined significance (MGUS) and healthy individuals is presented. The method is based on the combination of colloidal gold nanoplasmonics and surface plasmon resonance (SPR) biosensing and probes distinct
PMID 26469728

Colloidal gold-based indirect competitive immunochromatographic assay for rapid detection of bioactive isoflavone glycosides daidzin and genistin in soy products.

Sakamoto S1, Yusakul G1, Pongkitwitoon B1, Tanaka H2, Morimoto S1.
Food chemistry.Food Chem.2016 Mar 1;194:191-5. doi: 10.1016/j.foodchem.2015.08.002. Epub 2015 Aug 4.
Daidzin (DZ) and genistin (GEN) are two major soy isoflavone glycosides isolated from soybeans. Soy products containing isoflavones have recently been widely accepted for commercial use. However, the Japanese Government has suggested that soy isoflavone intake should be limited because of their estr
PMID 26471543

Cloning, expression, purification and application of a novel chitinase from a thermophilic marine bacterium Paenibacillus barengoltzii.

Yang S1, Fu X1, Yan Q2, Guo Y1, Liu Z3, Jiang Z4.
Food chemistry.Food Chem.2016 Feb 1;192:1041-8. doi: 10.1016/j.foodchem.2015.07.092. Epub 2015 Jul 23.
A novel chitinase gene (PbChi70) from a marine bacterium Paenicibacillus barengoltzii was cloned and functionally expressed in Escherichia coli. The recombinant enzyme (PbChi70) was purified to homogeneity with a recovery yield of 51.9%. The molecular mass of purified enzyme was estimated to be 70.0
PMID 26304445