出典(authority):フリー百科事典『ウィキペディア(Wikipedia)』「2014/03/17 04:40:44」(JST)
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (August 2010) |
A heart valve normally allows blood flow in only one direction through the heart. The four valves commonly represented in a mammalian heart determine the pathway of blood flow through the heart. A heart valve opens or closes incumbent upon differential blood pressure on each side.[1][2][3]
The four valves in the heart are:[4]
A form of heart disease occurs when a valve malfunctions and allows some blood to flow in the wrong direction. This is called regurgitation.
Heart valves separate the atria from the ventricles, or the ventricles from a blood vessel. Heart valves are situated around a tendinous ring, and possess cusps. Each valve possesses three cusps, except for the mitral valve, which possesses only two.
These are small valves that prevent backflow from the ventricles into the atrium during systole. They are anchored to the wall of the ventricle by chordae tendineae, which prevent the valve from inverting.
The chordae tendineae are attached to papillary muscles that cause tension to better hold the valve. Together, the papillary muscles and the chordae tendineae are known as the subvalvular apparatus. The function of the subvalvular apparatus is to keep the valves from prolapsing into the atria when they close. The subvalvular apparatus have no effect on the opening and closure of the valves, however. This is caused entirely by the pressure gradient across the valve. The peculiar insertion of chords on the leaflet free margin however provides systolic stress sharing between chords according to their different thickness.[5]
The closure of the AV valves is heard as the first heart sound (S1).
Also known as the "bicuspid valve" because it contains two flaps, the mitral valve gets its name from the resemblance to a bishop's mitre (a type of hat). It allows the blood to flow from the left atrium into the left ventricle. It is on the left side of the heart and has two cusps.
A common complication of rheumatic fever is thickening and stenosis of the mitral valve.
The tricuspid valve is the three-flapped valve on the right side of the heart, between the right atrium and the right ventricle which stops the backflow of blood between the two. It has three cusps.
These are located at the base of both the pulmonary trunk (pulmonary artery) and the aorta, the two arteries taking blood out of the ventricles. These valves permit blood to be forced into the arteries, but prevent backflow of blood from the arteries into the ventricles. These valves do not have chordae tendineae, and are more similar to valves in veins than atrioventricular valves. Closure of the semilunar valves causes the second heart sound.
The aortic valve lies between the left ventricle and the aorta. The aortic valve has three cusps. During ventricular systole, pressure rises in the left ventricle. When the pressure in the left ventricle rises above the pressure in the aorta, the aortic valve opens, allowing blood to exit the left ventricle into the aorta. When ventricular systole ends, pressure in the left ventricle rapidly drops. When the pressure in the left ventricle decreases, the aortic pressure forces the aortic valve to close. The closure of the aortic valve contributes the A2 component of the second heart sound (S2).
The most common congenital abnormality of the heart is the bicuspid aortic valve. In this condition, instead of three cusps, the aortic valve has two cusps. This condition is often undiagnosed until the person develops calcific aortic stenosis.[6][7] Aortic stenosis occurs in this condition usually in patients in their 40s or 50s, an average of over 10 years earlier than in people with normal aortic valves.
The pulmonary valve (sometimes referred to as the pulmonic valve) is the semilunar valve of the heart that lies between the right ventricle and the pulmonary artery, and has three cusps. Similar to the aortic valve, the pulmonary valve opens in ventricular systole, when the pressure in the right ventricle rises above the pressure in the pulmonary artery. At the end of ventricular systole, when the pressure in the right ventricle falls rapidly, the pressure in the pulmonary artery will close the pulmonary valve.
The closure of the pulmonary valve contributes the P2 component of the second heart sound (S2). The right heart is a low-pressure system, so the P2 component of the second heart sound is usually softer than the A2 component of the second heart sound. However, it is physiologically normal in some young people to hear both components separated during inhalation.
The cusps of the heart valves serve to seal the heart valves when closed. There are three cusps for each valve except for the mitral valve, which has only two (hence its alternate name, "bicuspid valve"). "Nodules" are located at the tip of the valve, to form a tighter seal.
Base of ventricles exposed by removal of the atria. (Valves visible on top of heart.)
Aorta laid open to show the semilunar valves. (Note that captions don't align with current terminology.)
In general, motion of the heart valves is determined using the Navier-Stokes equation; using boundary conditions of the blood pressures, pericardial fluid, and external loading as the constraints.
Motion of the heart valves is used as a boundary condition in the Navier-Stokes equation in determining the fluid dynamics of blood ejection from the left and right ventricles into the aorta and the lung.
The pressure drop, , across an open heart valve relates to the flow rate, Q, through the valve:
If:
-Inflow energy conserved
-Stagnant region behind leaflets
-Outflow momentum conserved
-Flat velocity profile
Usually the aortic and mitral valves are incorporated in valve studies within a single degree of freedom. These relationships are based on the idea of the valve being a structure with a single degree of freedom. These relationships are based upon the Euler equations.
Equations for the aortic valve in this case:
where:
u=axial velocity
p=pressure
A=cross sectional area of valve
L=axial length of valve
(t)=single degree of freedom; when
Atrioventricular valve
Illustration of heart valves (superior view)
Illustration of the valves of the heart when the ventricles are contracting.
|
全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.
リンク元 | 「valvular」 |
関連記事 | 「cardiac」「valve」 |
.