tellurium

テルル

関

Te

　 　

WordNet

1. a brittle silver-white metalloid element that is related to selenium and sulfur; it is used in alloys and as a semiconductor; occurs mainly as tellurides in ores of copper and nickel and silver and gold (同)Te, atomic number 52

PrepTutorEJDIC

1. テリウム(非金属元素;化学記号は Te)
2. tellurium の化学記号

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2014/11/13 05:20:30」(JST)

wiki en

[Wiki en表示]

Tellurium,  ₅₂Te

General properties
Name, symbol	tellurium, Te
Pronunciation	/tɨˈl(j)ʊəriəm/ te-LEWR-ee-əm
Appearance	silvery lustrous gray
Tellurium in the periodic table
Se ↑ Te ↓ Po antimony ← tellurium → iodine
Atomic number	52
Standard atomic weight	127.60(3)
Element category	metalloid
Group, block	group 16 (chalcogens), p-block
Period	period 5
Electron configuration	[Kr] 4d10 5s2 5p4
per shell	2, 8, 18, 18, 6
Physical properties
Phase	solid
Melting point	722.66 K ​(449.51 °C, ​841.12 °F)
Boiling point	1261 K ​(988 °C, ​1810 °F)
Density (near r.t.)	6.24 g·cm−3 (at 0 °C, 101.325 kPa)
Liquid density	at m.p.: 5.70 g·cm−3
Heat of fusion	17.49 kJ·mol−1
Heat of vaporization	114.1 kJ·mol−1
Molar heat capacity	25.73 J·mol−1·K−1
Vapor pressure P (Pa) 1 10 100 1 k 10 k 100 k at T (K)   (775) (888) 1042 1266
Atomic properties
Oxidation states	6, 5, 4, 2, −2 ​(a mildly acidic oxide)
Electronegativity	Pauling scale: 2.1
Ionization energies	1st: 869.3 kJ·mol−1 2nd: 1790 kJ·mol−1 3rd: 2698 kJ·mol−1
Atomic radius	empirical: 140 pm
Covalent radius	138±4 pm
Van der Waals radius	206 pm
Miscellanea
Crystal structure	​hexagonal
Speed of sound	thin rod: 2610 m·s−1 (at 20 °C)
Thermal conductivity	1.97–3.38 W·m−1·K−1
Magnetic ordering	diamagnetic
Young's modulus	43 GPa
Shear modulus	16 GPa
Bulk modulus	65 GPa
Mohs hardness	2.25
Brinell hardness	180 MPa
CAS number	13494-80-9
History
Naming	after Roman Tellus, deity of the Earth
Discovery	Franz-Joseph Müller von Reichenstein (1782)
First isolation	Martin Heinrich Klaproth
Most stable isotopes
iso NA half-life DM DE (MeV) DP 120Te 0.09% >2.2×1016 y (β+β+) 1.701 120Sn 121Te syn 16.78 d ε 1.040 121Sb 122Te 2.55% – (SF) <30.974 123Te 0.89% >9.2×1016 y (ε) 0.051 123Sb 124Te 4.74% – (SF) <28.221 125Te 7.07% – (SF) <26.966 126Te 18.84% – (SF) <26.011 127Te syn 9.35 h β− 0.698 127I 128Te 31.74% 2.2×1024 y β−β− 0.867 128Xe 129Te syn 69.6 min β− 1.498 129I 130Te 34.08% 7.9×1020 y β−β− 2.528 130Xe
Decay modes in parentheses are predicted, but have not yet been observed

Tellurium is a chemical element with symbol Te and atomic number 52. A brittle, mildly toxic, rare, silver-white metalloid which looks similar to tin, tellurium is chemically related to selenium and sulfur. It is occasionally found in native form, as elemental crystals. Tellurium is far more common in the universe as a whole than it is on Earth. Its extreme rarity in the Earth's crust, comparable to that of platinum, is partly due to its high atomic number, but also due to its formation of a volatile hydride which caused the element to be lost to space as a gas during the hot nebular formation of the planet.

Tellurium was discovered in Habsburg Empire, in 1782 by Franz-Joseph Müller von Reichenstein in a mineral containing tellurium and gold. Martin Heinrich Klaproth named the new element in 1798 after the Latin word for "earth", tellus. Gold telluride minerals are the most notable natural gold compounds. However, they are not a commercially significant source of tellurium itself, which is normally extracted as a by-product of copper and lead production.

Commercially, the primary use of tellurium is in alloys, foremost in steel and copper to improve machinability. Applications in solar panels and as a semiconductor material also consume a considerable fraction of tellurium production.

Tellurium has no biological function, although fungi can incorporate it in place of sulfur and selenium into amino acids such as tellurocysteine and telluromethionine. In humans, tellurium is partly metabolized into dimethyl telluride, (CH₃)₂Te, a gas with a garlic-like odor which is exhaled in the breath of victims of tellurium toxicity or exposure.

Characteristics

Physical properties

When crystalline, tellurium is silvery-white and when it is in pure state it has a metallic luster. It is a brittle and easily pulverized metalloid. Amorphous tellurium is found by precipitating it from a solution of tellurous or telluric acid (Te(OH)₆). Tellurium is a semiconductor that shows a greater electrical conductivity in certain directions which depends on atomic alignment; the conductivity increases slightly when exposed to light (photoconductivity). When in its molten state, tellurium is corrosive to copper, iron and stainless steel.

Chemical properties

Tellurium adopts a polymeric structure, consisting of zig-zag chains of Te atoms. This gray material resists oxidation by air and is nonvolatile.

Isotopes

Main article: Isotopes of tellurium

Naturally occurring tellurium has eight isotopes. Five of those isotopes, ¹²²Te, ¹²³Te, ¹²⁴Te, ¹²⁵Te and ¹²⁶Te, are stable. The other three, ¹²⁰Te, ¹²⁸Te and ¹³⁰Te, have been observed to be radioactive. The stable isotopes make up only 33.2% of the naturally occurring tellurium; this is possibly due to the long half-lives of the unstable isotopes. They are in the range from 10¹³ to 2.2 × 10²⁴ years (for ¹²⁸Te). This makes ¹²⁸Te the isotope with the longest half life among all radionuclides, which is approximately 160 trillion (10¹²) times the age of known universe.

There are 38 known nuclear isomers of tellurium with atomic masses that range from 105 to 142. Tellurium is among the lightest elements known to undergo alpha decay, with isotopes ¹⁰⁶Te to ¹¹⁰Te being able to undergo this mode of decay. The atomic mass of tellurium (127.60 g·mol⁻¹) exceeds that of the following element iodine (126.90 g·mol⁻¹).

Occurrence

See also: Telluride mineral

Tellurium on quartz (Moctezuma, Sonora, Mexico)

Native tellurium crystal on sylvanite (Vatukoula, Viti Levu, Fiji). Picture width 2 mm.

With an abundance in the Earth's crust comparable to that of platinum, tellurium is one of the rarest stable solid elements in the Earth's crust. Its abundance is about 1 µg/kg. In comparison, even the rarest of the lanthanides have crustal abundances of 500 µg/kg (see Abundance of the chemical elements).

The extreme rarity of tellurium in the Earth's crust is not a reflection of its cosmic abundance, which is in fact greater than that of rubidium, even though rubidium is ten thousand times more abundant in the Earth's crust. The extraordinarily low abundance of tellurium on Earth is rather thought to be due to conditions in the Earth's formation, when the stable form of certain elements, in the absence of oxygen and water, was controlled by the reductive power of free hydrogen. Under this scenario, certain elements such as tellurium which form volatile hydrides were severely depleted during the formation of the Earth's crust, through evaporation of these hydrides. Tellurium and selenium are the heavy elements most depleted in the Earth's crust by this process.

Tellurium is sometimes found in its native (i.e., elemental) form, but is more often found as the tellurides of gold such as calaverite and krennerite (two different polymorphs of AuTe₂), petzite, Ag₃AuTe₂, and sylvanite, AgAuTe₄. The city of Telluride, Colorado was named in hope of a strike of gold telluride (which never materialized, though gold metal ore was found). Gold itself is usually found uncombined, but when found naturally as a chemical compound, it is most often combined with tellurium.

Although tellurium is found with gold more often than in uncombined form, it is found even more often combined with elements other than gold, as tellurides of more common metals (e.g. melonite, NiTe₂). Natural tellurite and tellurate minerals also occur, formed by oxidation of tellurides near the Earth's surface. In contrast to selenium, tellurium is not in general able to replace sulfur in its minerals, due to the large difference in ion radius of sulfur and tellurium. In consequence, many common sulfide minerals contain considerable amounts of selenium, but only traces of tellurium.

In the gold rush of 1893, diggers in Kalgoorlie discarded a pyritic material which got in their way as they searched for pure gold. The Kalgoorlie waste was thus used to fill in potholes or as part of sidewalks. Three years passed before it was realized that this waste was calaverite, a telluride of gold that had not been recognized. This led to a second gold rush in 1896 which included mining the streets.

History

Klaproth named the new element and credited von Reichenstein with its discovery

Tellurium (Latin tellus meaning "goddess of the earth") was discovered in the 18th century in a gold ore from the mines in Zlatna, near today's city of Sibiu, Romania. This ore was known as "Faczebajer weißes blättriges Golderz" (white leafy gold ore from Faczebaja, German name of Facebánya, now Faţa Băii in Alba County) or antimonalischer Goldkies (antimonic gold pyrite), and, according to Anton von Rupprecht, was Spießglaskönig (argent molybdique), containing native antimony. In 1782 Franz-Joseph Müller von Reichenstein, who was then serving as the Austrian chief inspector of mines in Transylvania, concluded that the ore did not contain antimony, but that it was bismuth sulfide. The following year, he reported that this was erroneous and that the ore contained mostly gold and an unknown metal very similar to antimony. After a thorough investigation which lasted for three years and consisted of more than fifty tests, Müller determined the specific gravity of the mineral and noted the radish-like odor of the white smoke which passed off when the new metal was heated, the red color which the metal imparts to sulfuric acid, and the black precipitate which this solution gives when diluted with water. Nevertheless, he was not able to identify this metal and gave it the names aurum paradoxium and metallum problematicum, as it did not show the properties predicted for the expected antimony.

In 1789, a Hungarian scientist, Pál Kitaibel, also discovered the element independently in an ore from Deutsch-Pilsen which had been regarded as argentiferous molybdenite, but later he gave the credit to Müller. In 1798, it was named by Martin Heinrich Klaproth who had earlier isolated it from the mineral calaverite. The 1960s brought growth in thermoelectric applications for tellurium (as bismuth telluride), as well as its use in free-machining steel, which became the dominant use.

Production

The principal source of tellurium is from anode sludges produced during the electrolytic refining of blister copper. It is a component of dusts from blast furnace refining of lead. Treatment of 1000 tons of copper ore typically yields one kilogram (2 pounds) of tellurium. Tellurium is produced mainly in the United States, Peru, Japan and Canada. For the year 2009 the British Geological Survey gives the following numbers: United States 50 t, Peru 7 t, Japan 40 t and Canada 16 t.

Tellurium production 2006

The anode sludges contain the selenides and tellurides of the noble metals in compounds with the formula M₂Se or M₂Te (M = Cu, Ag, Au). At temperatures of 500 °C the anode sludges are roasted with sodium carbonate under air. The metal ions are reduced to the metals, while the telluride is converted to sodium tellurite.

M₂Te + O₂ + Na₂CO₃ → Na₂TeO₃ + 2 M + CO₂

Tellurites can be leached from the mixture with water and are normally present as hydrotellurites HTeO₃^– in solution. Selenites are also formed during this process, but they can be separated by adding sulfuric acid. The hydrotellurites are converted into the insoluble tellurium dioxide while the selenites stay in solution.

HTeO−
3 + OH^– + H₂SO₄ → TeO₂ + SO2−
4 + 2 H₂O

The reduction to the metal is done either by electrolysis or by reacting the tellurium dioxide with sulfur dioxide in sulfuric acid.

TeO₂ + 2 SO₂ + 2H₂O → Te + SO2−
4 + 4 H⁺

Commercial-grade tellurium is usually marketed as 200-mesh powder but is also available as slabs, ingots, sticks, or lumps. The year-end price for tellurium in 2000 was US$14 per pound. In recent years, the tellurium price was driven up by increased demand and limited supply, reaching as high as US$100 per pound in 2006. Despite an expected doubling in production due to improved extraction methods, the United States Department of Energy (DoE) anticipates a supply shortfall of tellurium by 2025.

Compounds

See also the categories Tellurium compounds and Telluride minerals.

Tellurium belongs to the same chemical family as oxygen, sulfur, selenium and polonium: the chalcogen family. Tellurium and selenium compounds are similar. It exhibits the oxidation states −2, +2, +4 and +6, with the +4 state being most common.

Tellurides

Reduction of Te metal produces the tellurides and polytellurides, Te_n^2–. The −2 oxidation state is exhibited in binary compounds with many metals, such as zinc telluride, ZnTe, formed by heating tellurium with zinc. Decomposition of ZnTe with hydrochloric acid yields hydrogen telluride (H
2Te), a highly unstable analogue of the other chalcogen hydrides, H
2O, H
2S and H
2Se:

ZnTe + 2 HCl → ZnCl
2 + H
2Te

H
2Te is unstable, whereas salts of its conjugate base [TeH]^– are stable.

Halides

The +2 oxidation state is exhibited by the dihalides, TeCl
2, TeBr
2 and TeI
2. The dihalides have not been obtained in pure form, although they are known decomposition products of the tetrahalides in organic solvents, and their derived tetrahalotellurates are well-characterized:

Te + X
2 + 2 X−
→ TeX2−
4

where X is Cl, Br, or I. These anions are square planar in geometry. Polynuclear anionic species also exist, such as the dark brown Te
2I2−
6, and the black Te
4I2−
14.

Fluorine forms two halides with tellurium: the mixed-valence Te
2F
4 and TeF
6. In the +6 oxidation state, the –OTeF
5 structural group occurs in a number of compounds such as HOTeF
5, B(OTeF
5)
3, Xe(OTeF
5)
2, Te(OTeF
5)
4 and Te(OTeF
5)
6. The square antiprismatic anion TeF2−
8 is also attested. The other halogens do not form halides with tellurium in the +6 oxidation state, but only tetrahalides (TeCl
4, TeBr
4 and TeI
4) in the +4 state, and other lower halides (Te
3Cl
2, Te
2Cl
2, Te
2Br
2, Te
2I and two forms of TeI). In the +4 oxidation state, halotellurate anions are known, such as TeCl2−
6 and Te
2Cl2−
10. Halotellurium cations are also attested, including TeI+
3, found in TeI
3AsF
6.

Oxocompounds

A sample of tellurium dioxide powder

Tellurium monoxide was first reported in 1883 as a black amorphous solid formed by the heat decomposition of TeSO
3 in vacuum, disproportionating into tellurium dioxide, TeO
2 and elemental tellurium upon heating. Since then, however, some doubt has been cast on its existence in the solid phase, although it is known as a vapor phase fragment; the black solid may be merely an equimolar mixture of elemental tellurium and tellurium dioxide.

Tellurium dioxide is formed by heating tellurium in air, causing it to burn with a blue flame. Tellurium trioxide, β-TeO
3, is obtained by thermal decomposition of Te(OH)
6. The other two forms of trioxide reported in the literature, the α- and γ- forms, were found not to be true oxides of tellurium in the +6 oxidation state, but a mixture of Te4+
, OH−
and O−
2. Tellurium also exhibits mixed-valence oxides, Te
2O
5 and Te
4O
9.

The tellurium oxides and hydrated oxides form a series of acids, including tellurous acid (H
2TeO
3), orthotelluric acid (Te(OH)
6) and metatelluric acid ((H
2TeO
4)
n). The two forms of telluric acid form tellurate salts containing the TeO2–
4 and TeO6−
6 anions, respectively. Tellurous acid forms tellurite salts containing the anion TeO2−
3. Other tellurium cations include TeF2+
8, which consists of two fused tellurium rings and the polymeric TeF2+
7.

Zintl cations

When tellurium is treated with concentrated sulfuric acid, it forms red solutions containing the Zintl ion, Te2+
4. The oxidation of tellurium by AsF
5 in liquid SO
2 also produces this square planar cation, as well as with the trigonal prismatic, yellow-orange Te4+
6:

4 Te + 3 AsF
5 → Te2+
4(AsF−
6)
2 + AsF
3

6 Te + 6 AsF
5 → Te4+
6(AsF−
6)
4 + 2 AsF
3

Other tellurium Zintl cations include the polymeric Te2+
7 and the blue-black Te2+
8, which consists of two fused 5-membered tellurium rings. The latter cation is formed by the reaction of tellurium with tungsten hexachloride:

8 Te + 2 WCl
6 → Te2+
8(WCl−
6)
2

Interchalcogen cations also exist, such as Te
2Se2+
6 (distorted cubic geometry) and Te
2Se2+
8. These are formed by oxidizing mixtures of tellurium and selenium with AsF
5 or SbF
5.

Organotellurium compounds

Main article: Organotellurium chemistry

Tellurium does not readily form analogues of alcohols and thiols, with the functional group –TeH and are called tellurols. The –TeH functional group is also attributed to using the prefix tellanyl-. Like H₂Te, these species are unstable with respect to loss of hydrogen. Telluraethers (R-Te-R) are more stable as are telluroxides.

Applications

Metallurgy

The largest consumer of tellurium is metallurgy, where it is used in iron, copper and lead alloys. When added to stainless steel and copper it makes these metals more machinable. It is alloyed into cast iron for promoting chill for spectroscopic purposes, as the presence of electrically conductive free graphite tends to deleteriously affect spark emission testing results. In lead it improves strength and durability and decreases the corrosive action of sulfuric acid.

Semiconductor and electronic industry uses

A CdTe photovoltaic array

Tellurium is used in cadmium telluride (CdTe) solar panels. National Renewable Energy Laboratory lab tests using this material achieved some of the highest efficiencies for solar cell electric power generation. Massive commercial production of CdTe solar panels by First Solar in recent years has significantly increased tellurium demand. If some of the cadmium in CdTe is replaced by zinc then (Cd,Zn)Te is formed which is used in solid-state X-ray detectors.

Alloyed with both cadmium and mercury, to form mercury cadmium telluride, an infrared sensitive semiconductor material is formed. Organotellurium compounds such as dimethyl telluride, diethyl telluride, diisopropyl telluride, diallyl telluride and methyl allyl telluride are used as precursors for metalorganic vapor phase epitaxy growth of II-VI compound semiconductors. Diisopropyl telluride (DIPTe) is employed as the preferred precursor for achieving the low-temperature growth of CdHgTe by MOVPE. For these processes highest purity metalorganics of both selenium and tellurium are used. The compounds for semiconductor industry and are prepared by adduct purification.

Tellurium as a tellurium suboxide is used in the media layer of several types of rewritable optical discs, including ReWritable Compact Discs (CD-RW), ReWritable Digital Video Discs (DVD-RW) and ReWritable Blu-ray Discs.

Tellerium dioxide is used to create acousto-optic modulators (AOTFs and AOBSs) for confocal microscropy.

Tellurium is used in the new phase change memory chips developed by Intel. Bismuth telluride (Bi₂Te₃) and lead telluride are working elements of thermoelectric devices. Lead telluride is used in far-infrared detectors.

Other uses

• Used to color ceramics.
• The strong increase in optical refraction upon the addition of selenides and tellurides into glass is used in the production of glass fibers for telecommunications. These chalcogenide glasses are widely used.
• Mixtures of selenium and tellurium are used with barium peroxide as oxidizer in the delay powder of electric blasting caps.
• Organic tellurides have been employed as initiators for living radical polymerization and electron-rich mono- and di-tellurides possess antioxidant activity.
• Rubber can be vulcanized with tellurium instead of sulfur or selenium. The rubber produced in this way shows improved heat resistance.
• Tellurite agar is used to identify member of the corynebacterium genus, most typically Corynebacterium diphtheriae, the pathogen responsible for diphtheria.

Biological role

Tellurium has no known biological function, although fungi can incorporate it in place of sulfur and selenium into amino acids such as telluro-cysteine and telluro-methionine. Organisms have shown a highly variable tolerance to tellurium compounds. Many cells take up tellurite and reduce it to elemental tellurium which accumulates and causes a characteristic and often dramatic darkening of cells. In yeast, this reduction is mediated by the sulfate assimilation pathway. Tellurium accumulation seems to account for a major part of the toxicity effects. Many organisms also metabolize tellurium partly to form dimethyl telluride although dimethyl ditelluride is also formed by some species. Dimethyl telluride has been observed in hot springs at very low concentrations.

Precautions

Tellurium and tellurium compounds are considered to be mildly toxic and need to be handled with care, although acute poisoning is rare. Tellurium is not reported to be carcinogenic.

Humans exposed to as little as 0.01 mg/m³ or less in air exude a foul garlic-like odor known as "tellurium breath." This is caused from the tellurium being metabolized by the body, converting it from any oxidation state to dimethyl telluride, (CH₃)₂Te. This is a volatile compound with a highly pungent garlic-like smell. Even though the metabolic pathways of tellurium are not known, it is generally assumed that they resemble those of the more extensively studied selenium, because the final methylated metabolic products of the two elements are similar.

See also

• The 1862 telluric helix of Alexandre-Émile Béguyer de Chancourtois.

References

External links

• USGS Mineral Information on Selenium and Tellurium
• Tellurium at The Periodic Table of Videos (University of Nottingham)
• CDC - NIOSH Pocket Guide to Chemical Hazards - Tellurium

English Journal

• A new tellurium-containing amphiphilic molecule induces apoptosis in HCT116 colon cancer cells.

• Du P1, Saidu NE2, Intemann J2, Jacob C3, Montenarh M4.
• Biochimica et biophysica acta.Biochim Biophys Acta.2014 Jun;1840(6):1808-16. doi: 10.1016/j.bbagen.2014.02.003. Epub 2014 Feb 12.
• BACKGROUND: Chalcogen-based redox modulators over the years have attracted considerable attention as anti-cancer agents. New selenium- and tellurium-containing compounds with a polar head group and aryl-groups of various lengths have recently been reported as biologically active in several organisms
• PMID 24530428

• A supramolecular microgel glutathione peroxidase mimic with temperature responsive activity.

• Yin Y1, Jiao S, Lang C, Liu J.
• Soft matter.Soft Matter.2014 May 21;10(19):3374-85. doi: 10.1039/c3sm53117a. Epub 2014 Mar 21.
• Glutathione peroxidase (GPx) protects cells from oxidative damage by scavenging surplus reactive oxygen species (ROS). Commonly, an appropriate amount of ROS acts as a signal molecule in the metabolism. A smart artificial GPx exhibits adjustable catalytic activity, which can potentially reduce the a
• PMID 24652520

• Strong Second Harmonic Generation (SHG) Originating from Combined Second-Order Jahn-Teller (SOJT) Distortive Cations in a New Noncentrosymmetric Tellurite, InNb(TeO4)2.

• Kim YH1, Lee DW, Ok KM.
• Inorganic chemistry.Inorg Chem.2014 May 7. [Epub ahead of print]
• Pure polycrystalline bulk samples and single crystals of a novel polar noncentrosymmetric (NCS) indium niobium tellurium oxide, InNb(TeO4)2, have been synthesized through solid-state reactions with In2O3, Nb2O5, and TeO2. InNb(TeO4)2 exhibits a three-dimensional structural backbone consisting of lay
• PMID 24806285

• A new strategy for realizing the conversion of "homo-hetero-homo" heteroepitaxial growth in bi2 te3 and the thermoelectric performance.

• Guo W1, Ma J, Yang J, Li D, Qin Q, Wei C, Zheng W.
• Chemistry (Weinheim an der Bergstrasse, Germany).Chemistry.2014 May 5;20(19):5657-64. doi: 10.1002/chem.201304436. Epub 2014 Apr 2.
• Uncovering the reason for structure-dependent thermoelectric performance still remains a big challenge. A low-temperature and easily scalable strategy for synthesizing Bi2 Te3 nanostring hierarchical structures through solution-phase reactions, during which there is the conversion of "homo-hetero-ho
• PMID 24700422

Japanese Journal

• SYNTHESIS AND STRUCTURAL CHARACTERIZATION OF A NOVEL ORGANOTELLURIUM COMPOUND : DINAPHTHO[2,3-b;2',3'-d]-TELLUROPHENE (Dedicated to Professor Isao Kuwajima on the occasion of his 77th birthday)

• Matsumura Mio,Muranaka Atsuya,Kakusawa Naoki [他]
• Heterocycles : an international journal for reviews and communications in heterocyclic chemistry 90(1), 121-125, 2015-01-01
• NAID 40020330012

• 9pAX-3 三方晶テルル、セレンにおけるWeyl点とスピン構造(9pAX トポロジカル絶縁体・ワイル半金属(理論),領域4(半導体,メゾスコピック系・局在))

• 平山 元昭,奥川 亮,石橋 章司,村上 修,三宅 隆
• 日本物理学会講演概要集 69(2-4), 490, 2014-08-22
• NAID 110009875766

• セレンおよびテルル原子を含む複素環合成研究について（２）含セレン，テルル複素環の骨格変換および反応性

• 指田 春喜
• 北陸大学紀要 = Bulletin of Hokuriku University (37), 2014-03-31
• The preparations, reactions and functionalities of two types of the pyrylium salts (1- and 2-seleno- or telluro-pyrylium salts) are described. The 1-benzoselenopyrylium and 1-benzotelluropyrylium salt …
• NAID 120005450541

• 28pCL-12 圧力下のセレン、テルルのDirac分散に対するスピン軌道相互作用の効果(28pCL 領域4,領域7合同 グラフェン(分光・電子状態),領域4(半導体,メゾスコピック系・局在))

• 平山 元昭,石橋 章司,三宅 隆
• 日本物理学会講演概要集 69(1-4), 712, 2014-03-05
• NAID 110009836126

Related Links

• Tellurium Q | Audio products designed to combat phase ...

Find out why more and more people are talking about Tellurium Q® products. You do not have to believe all the incredible reviews, just test our products for yourself against anything else in the same price range and hear for yourself ...

• Tellurium (Te) - Chemical properties, health and environmental ...

Tellurium Tellurium is a semimetallic, lustrous, crystalline, brittle, silver-white element. It is usually available as a dark grey powder, it has the properties both of the metals and the non metals. Tellurium forms many compounds ...

• Tellurium»the essentials [WebElements Periodic Table]

Crystalline tellurium has a silvery-white appearance, and exhibits a metallic lustre when pure (see above). It is brittle and easily pulverised. Tellurium is a p-type semiconductor, and shows varying conductivity with crystal alignment. Its ...

Related Pictures