出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2014/12/19 07:53:56」(JST)
| This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (September 2014) |
| Sound measurements | |
|---|---|
|
Characteristic
|
Symbol
|
| Sound pressure | p · SPL |
| Particle velocity | v · SVL |
| Particle displacement | ξ |
| Sound intensity | I · SIL |
| Sound power | P · SWL |
| Sound energy | W |
| Sound energy density | w |
| Sound exposure | E · SEL |
| Sound energy flux | Q |
| Acoustic impedance | Z |
| Speed of sound | c |
| Audio frequency | AF |
|
|
|
|
|
Sound intensity or acoustic intensity is defined as the sound power per unit area. The usual context is the noise measurement of sound intensity in the air at a listener's location as a sound energy quantity.[1]
Sound intensity is not the same physical quantity as sound pressure. Hearing is directly sensitive to sound pressure which is related to sound intensity. In consumer audio electronics, the level differences are called "intensity" differences, but sound intensity is a specifically defined quantity and cannot be sensed by a simple microphone.
Sound intensity, denoted I and measured in W·m−2, is given by:
where:
Both I and v are vectors, which means that both have a direction as well as a magnitude. The direction of sound intensity is the average direction in which energy is flowing.
The average sound intensity during time T is given by:
Sound intensity can be related to other sound measurements:
For sine waves with angular frequency ω, the amplitude of the sound intensity can be related to those of the particle displacement and the particle acceleration:
| Symbol | Unit | Meaning |
|---|---|---|
| c | m·s−1 | speed of sound |
| v | m·s−1 | particle velocity |
| z | Pa·m−1·s | specific acoustic impedance |
| A | m2 | area |
| p | Pa | sound pressure |
| P | W | sound power |
| I | W·m−2 | sound intensity |
| w | J·m−3 | sound energy density |
| ω | rad·s−1 | angular frequency |
| ξ | m | particle displacement |
| a | m·s−2 | particle acceleration |
For a spherical sound source, the intensity in the radial direction as a function of distance r from the centre of the source is:
Here, P is the sound power and A the surface area of a sphere of radius r. Thus the sound intensity decreases with 1/r2 the distance from an acoustic point source, while the sound pressure decreases only with 1/r from the distance from an acoustic point source after the 1/r-distance law.
where:
Hence
where p is the RMS sound pressure.
Sound intensity level (SIL) or sound velocity level is a logarithmic measure of sound intensity in comparison to a reference level.
Sound intensity level, denoted LI and measured in dB, is given by:
where:
If I0 is the standard reference sound intensity
then instead of dB SPL, dB SIL (sound intensity level) are used. The reference value is defined such that a plane wave propagating in a free field has the same value of SPL and SIL as the ratio of the reference pressure squared to the reference intensity is approximately equal to the characteristic impedance of air.[2] In an anechoic chamber, which approximates a free field, the SIL can be taken as being equal to the SPL. This fact is exploited to measure sound power in anechoic conditions.
One method of sound intensity measurement involves the use of two microphones located close to each other, normal to the direction of sound energy flow. A signal analyser is used to compute the crosspower between the measured pressures and the sound intensity is derived from (proportional to) the imaginary part of the crosspower.[3]
| This article's use of external links may not follow Wikipedia's policies or guidelines. Please improve this article by removing excessive or inappropriate external links, and converting useful links where appropriate into footnote references. (December 2012) |
全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.
| リンク元 | 「音の強さ」 |
| 関連記事 | 「sound」 |