WordNet

showing favoritism
being or affecting only a part; not total; "a partial description of the suspect"; "partial collapse"; "a partial eclipse"; "a partial monopoly"; "partial immunity"
a dental appliance that artificially replaces missing teeth (同)dental_plate, plate

PrepTutorEJDIC

(また『part』)『一部分の』,部分的な;不完全な / 不公平な,偏った / 《補語にのみ用いて》(…が)特に好きで《+『to』+『名』》
入れ歯,義歯

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2014/02/14 19:23:49」(JST)

wiki en

[Wiki en表示]

Occlusal view of a mandibular partial denture. All seven parts of an RPD are visible on this example.

Same RPD, different view.

A removable partial denture (RPD) is a denture for a partially edentulous patient who desires to have replacement teeth for functional or aesthetic reasons and who cannot have a bridge (a fixed partial denture) for any number of reasons, such as a lack of required teeth to serve as support for a bridge (i.e. distal abutments) or due to financial limitations.

The reason why this type of prosthesis is referred to as a removable partial denture is because patients can remove and reinsert them when required without professional help. Conversely, a "fixed" prosthesis can and should be removed only by a dental professional.

Partially edentulous conditions[edit]

Depending on where in the mouth teeth are missing, edentulous situations can be grouped under four different categories, as defined by Dr. Edward Kennedy in his classification of partially edentulous arches.

Class I (bilateral free ended partially edentulous)
Class II (unilateral free ended partially edentulous)
Class III (unilateral bounded partially edentulous)
Class IV (bilateral bounded anterior partially edentulous)

Kennedy Class I RPDs are fabricated for people who are missing some or all of their posterior teeth on both sides (left and right) in a single arch (either mandibular or maxillary), and there are no teeth posterior to the edentulous area. In other words, Class I RPDs clasp onto teeth that are more towards the front of the mouth, while replacing the missing posterior teeth on both sides with false denture teeth. The denture teeth are composed of either plastic or porcelain.

Class II RPDs are fabricated for people who are missing some or all of their posterior teeth on one side (left or right) in a single arch, and there are no teeth behind the edentulous area. Thus, Class II RPDs clasp onto teeth that are more towards the front of the mouth, as well as on teeth that are more towards the back of the mouth of the side on which teeth are not missing, while replacing the missing more-back-of-the-mouth teeth on one side with false denture teeth.

Class III RPDs are fabricated for people who are missing some teeth such that the edentulous area has teeth remaining both posterior and anterior to it. Unlike Class I and Class II RPDs which are both tooth-and-tissue-borne (meaning they both clasp onto teeth, as well as rest on the posterior edentulous area for support), Class III RPDs are strictly tooth-borne, which means they only clasp onto teeth and do not need to rest on the tissue for added support. This makes Class III RPDs exceedingly more secure as per the three rules of removable prostheses that will be mentioned later, namely: support, stability and retention. (See the article on dentures for a more thorough review of these three fundamentals of removable prosthodontics.)

However, if the edentulous area described in the previous paragraph crosses the anterior midline (that is, at least both central incisors are missing), the RPD is classified as a Class IV RPD. By definition, a Kennedy Class IV RPD design will possess only one edentulous area.

Class I, II and III RPDs that have multiple edentulous areas in which replacement teeth are being placed are further classified with modification states that were defined by Oliver C. Applegate. Kennedy classification is governed by the most posterior edentulous area that is being restored. Thus, if, for example, a maxillary arch is missing teeth #1, 3, 7-10 and 16, the RPD would be Kennedy Class III mod 1. It would not be Class I, because missing third molars are generally not restored in an RPD (although if they were, the classification would indeed be Class I), and it would not be Class IV, because modification spaces are not allowed for Kennedy Class IV.

Components of an RPD[edit]

Rather than lying entirely on the edentulous ridge like complete dentures, removable partial dentures possess clasps of metal or plastic that "clip" onto the remaining teeth, making the RPD more stable and retentive.

The parts of an RPD can be listed as follows (and are exemplified by the picture above):

Major Connector (the thick metal "U" in the RPD above is a lingual bar, a type of major connector)
Minor Connector (the small struts protruding from the lingual bar at roughly 90 degree angles)
Direct Retainer (examples are in the upper left of upper photo and lower right of lower photo; the clasp arms act to hug the teeth and keep the RPD in place. The metal clasp and rest immediately adjacent to the denture teeth is also a direct retainer.)
Indirect Retainer (example is the little metal piece coming off the "U" at a 90 degree angle near the top of the upper photo, which is a cingulum rest on a canine.)
- Physical Retainer (this is a mesh of metal that allows the pink base material to connect to the metal framework of the RPD. Some consider physical retainers their own component (making a total of seven), while others consider them within the indirect retainer category (thus making a total of six components.)
Base (the pink material, mimicking gingiva)
Teeth (plastic or porcelain formed in the shape of teeth)

Clasp design[edit]

Direct retainers may come in various designs:

Cast circumferential clasp (suprabulge)
- Akers'
- Half and half
- Back-action
- Ring clasp
Wrought wire clasp
Roach clasp (infrabulge)
- I-bar
- T-bar
- Y-bar
- 7-bar

Both cast circumferential and wrought wire clasps are suprabulge clasps, in that they engage an undercut on the tooth by originating coronal to the height of contour, while Roach clasps are infrabulge clasps and engage undercuts by approaching from the gingival.

In addition there are a couple of specific theories which include the clasp design:

RPI: mesial rest, distolingual guide plate, I-bar
- The RPI design was made for clasping a bilateral free end extension. These clasps are unique because they have to take into account extra torque force due to being tissue borne (and not tooth borne) at the posterior.
- Described by Kratochvil in 1963 and modified by Krol in 1973
  - Kratochvil designed the abutment tooth with a long rest (from the mesial marginal ridge to the distal pit), long guide plane, and a regular I-bar clasp.
  - Krol modified this design with a short occlusal rest, short guide plane (touching only from occlusal to middle third), and a mesial-shifted I-bar. The theory behind Krol's decision was to allow for movement of the partial denture without placing too much torque on the abutment tooth.
- An illustration of the RPI design function
RPA: mesial rest, distolingual guide plate, Akers' clasp-style retentive arm
RPC: mesial rest, distolingual guide plate, other type of cast circumferential clasp
- So named in response to the RPI Philosophy introduced by Kratochvil and Kroll

References[edit]

Davis Henderson, Victor L. Steffel. McCRACKEN's Removable partial prosthodontics, 1973. 4th Ed.

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

1. シェーグレン症候群における口内乾燥およびその他の非眼結膜炎症状の治療 treatment of dry mouth and other non ocular sicca symptoms in sjogrens syndrome
2. 口臭 bad breath
3. がん患者における薬物関連の顎骨壊死 medication related osteonecrosis of the jaw in patients with cancer
4. 口唇炎 cheilitis
5. 頭頚部癌の長期生存者に対するアプローチの概要 overview of approach to long term survivors of head and neck cancer

English Journal

Five-Year Follow-Up of Immediate Fixed Restorations of Maxillary Implants Inserted in Both Fresh Extraction and Healed Sites Using the NobelGuide™ System.

Polizzi G, Cantoni T.SourcePrivate Clinic BSC, Verona, Italy.
Clinical implant dentistry and related research.Clin Implant Dent Relat Res.2013 Jun 23. doi: 10.1111/cid.12102. [Epub ahead of print]
BACKGROUND: Transition from a hopeless dentition to an implant prosthesis, without wearing a removable denture, requires adaptation with guided surgery in postextraction cases.PURPOSE: The study aims to evaluate mid-term follow-up of patients with compromised dentition treated with immediate fixed r
PMID 23789721

Removable dental prostheses and cardiovascular survival: A 15-year follow-up study.

Janket SJ, Surakka M, Jones JA, Lam A, Schnell RA, Rose LM, Walls AW, Meurman JH.SourceBoston University, Henry M. Goldman School of Dental Medicine, Boston, MA, USA. Electronic address: skjanket@bu.edu.
Journal of dentistry.J Dent.2013 Jun 11. pii: S0300-5712(13)00132-2. doi: 10.1016/j.jdent.2013.05.009. [Epub ahead of print]
OBJECTIVES: In previous studies, increasing number of teeth predicted better survival and the acute needs for dental treatment predicted mortality. We sought to investigate whether restored dentitions by various removable dental prostheses impact cardiovascular (CVD) longevity.METHODS: Kuopio Oral H
PMID 23770385

The all-ceramic, inlay supported fixed partial denture. Part 4. Fracture surface analyses of an experimental model, all-ceramic, inlay supported fixed partial denture.

Thompson M, Sornsuwan T, Swain M.SourceDiscipline of Biomaterials, Faculty of Dentistry, The University of Sydney, New South Wales.
Australian dental journal.Aust Dent J.2013 Jun;58(2):141-7. doi: 10.1111/adj.12040.
BACKGROUND: In the previous three papers, the authors sought to conduct a thorough analysis of the feasibility for the use of zirconia in inlay supported, fixed partial dentures via finite element analysis (FEA). Correlating the response of the numerical model against the experimental model has neve
PMID 23713632

Japanese Journal

症例義歯によるイレウスの診断で手術を行い盲腸癌が原因と判明した1例

藤本由希枝,村上雅一,相馬逸郎 [他]
外科 = Surgey : 臨床雑誌 76(4), 433-435, 2014-04
NAID 40020027323

Metallurgical characterization of high-copper amalgams : A brief history(Historia)

KOIKE Mari,MITCHELL Richard J,OKABE Toru
日本歯科理工学会誌 33(1), 33-36, 2014-01-25
1960〜1970年代にかけて,新しい歯科用アマルガムが開発された.新しい合金粉は,従来型合金粉(0〜4%銅)より多量な銅(10〜30%)を含んでいる.この高銅合金粉と水銀(40〜50%)の混合でできた混合物が"高銅アマルガム"である.世界最初の高銅アマルガムを開発したのは,カナダのInnesとYoudelisで,1963年のことである.この合金粉は,不規則な形状のAg-Sn合金粉と球状のAg-C …
NAID 110009798492

二回鋳造法を応用したブリッジ装着により咬合違和感が改善した一症例

藤田崇史,飯塚知明,廣川琢哉 [他]
明海歯科医学 43(1), 94-100, 2014
NAID 40019994972

Related Pictures

acrylic-partial-denture - South Calgary Denture and Implant Clinic Partials - Thomas Stewart Dentistry Partial Dentures - Kansas City, MO - John P. Goodman Fixed Partial Dentures- Dental Bridges - Dentist Says Owings Mills Partial Dentures Pikesville Partial Denture Towson Full and Partial Dentures Kevin Flood DDS: How removable partial dentures can help you Partial Dentures - Exceeding our patients expectations for over 30 years. - John