This article is about heavy construction equipment. For the AMD CPU microarchitecture, see Excavator (microarchitecture). For similar terminology, see excavation (disambiguation).
The principle of a hydraulic excavator.
Excavators (Hydraulic Excavators) are heavy construction equipment consisting of a boom, dipper (or stick), bucket and cab on a rotating platform known as the "house".[1] The house sits atop an undercarriage with tracks or wheels. They are a natural progression from the steam shovels and often mistakenly called power shovels. All movement and functions of a hydraulic excavator are accomplished through the use of hydraulic fluid, with hydraulic cylinders and hydraulic motors.[2] Due to the linear actuation of hydraulic cylinders, their mode of operation is fundamentally different from cable-operated excavators which use winches and steel ropes to accomplish the movements.[3]
Contents
- 1 Terminology
- 2 Usage
- 3 Configurations
- 4 Excavator attachments
- 5 Notable manufacturers
- 6 See also
- 7 References
- 8 External links
Terminology
Excavators are also called diggers, JCBs[citation needed] (a proprietary name, in an example of a generic trademark), mechanical shovels, or 360-degree excavators (sometimes abbreviated simply to 360). Tracked excavators are sometimes called "trackhoes" by analogy to the backhoe.[4] In the UK, wheeled excavators are sometimes known as "rubber ducks."[5]
Usage
Dashboard and controls of a 3.8 tons excavator
Excavators are used in many ways:
- Digging of trenches, holes, foundations
- Material handling
- Brush cutting with hydraulic attachments
- Forestry work
- Forestry mulching
- Demolition
- General grading/landscaping
- Mining, especially, but not only open-pit mining
- River dredging
- Driving piles, in conjunction with a pile driver
- Drilling shafts for footings and rock blasting, by use of an auger or hydraulic drill attachment
- Snow removal with snowplow and snow blower attachments
-
A cable-operated excavator under the Northwest (now Terex) name at the Pageant of Steam grounds
-
Excavator demolishing a house. Note the hydraulic thumb
-
Link-Belt excavator trenching
-
CAT 5230 in coal mining operation
-
A L&T Komatsu excavator seen in India
-
A New Holland E215 in Hamburg, Germany.
Configurations
Modern, hydraulic excavators come in a wide variety of sizes. The smaller ones are called mini or compact excavators.[6] For example, Caterpillar's smallest mini-excavator weighs 2,060 pounds (930 kg) and has 13 hp; their largest model is the largest excavator available (a record previously held by the Orenstein & Koppel RH400), the CAT 6090, which weighs in excess of 2,160,510 pounds (979,990 kg), has 4500 hp, and a bucket as large as 52.0 m³.
Engines in hydraulic excavators usually just drive hydraulic pumps; there are usually 3 pumps: the two main pumps are for supplying oil at high pressure (up to 5000 psi) for the arms, swing motor, track motors, and accessories, and the third is a lower pressure (~700 psi) pump for Pilot Control, this circuit used for the control of the spool valves, this allows for a reduced effort required when operating the controls. Generally, the 3 pumps used in excavators consist of 2 Variable displacement piston pumps and a Gear pump. The alignment of the pumps in the excavator unit changes with different manufacturers using different formats.
The two main sections of an excavator are the undercarriage and the house. The undercarriage includes the blade (if fitted), tracks, track frame, and final drives, which have a hydraulic motor and gearing providing the drive to the individual tracks, and the house includes the operator cab, counterweight, engine, fuel and hydraulic oil tanks. The house attaches to the undercarriage by way of a center pin. High pressure oil is supplied to the tracks' hydraulic motors through a hydraulic swivel at the axis of the pin, allowing the machine to slew 360° unhindered.[7]
The main boom attaches to the house, and can be one of several different configurations:
- Most are mono booms: these have no movement apart from straight up and down.
- Some others have a knuckle boom which can also move left and right in line with the machine.
- Another option is a hinge at the base of the boom allowing it to hydraulically pivot up to 180° independent to the house; however, this is generally available only to compact excavators.
- There are also triple-articulated booms (TAB).
Attached to the end of the boom is the stick (or dipper arm). The stick provides the digging force needed to pull the bucket through the ground. The stick length is optional depending whether reach (longer stick) or break-out power (shorter stick) is required.
On the end of the stick is usually a bucket. A wide, large capacity (mud) bucket with a straight cutting edge is used for cleanup and levelling or where the material to be dug is soft, and teeth are not required. A general purpose (GP) bucket is generally smaller, stronger, and has hardened side cutters and teeth used to break through hard ground and rocks. Buckets have numerous shapes and sizes for various applications. There are also many other attachments which are available to be attached to the excavator for boring, ripping, crushing, cutting, lifting, etc.
Before the 1990s, all excavators had a long or conventional counterweight that hung off the rear of the machine to provide more digging force and lifting capacity. This became a nuisance when working in confined areas. In 1993 Yanmar launched the world's first Zero Tail Swing excavator,[8] which allows the counterweight to stay inside the width of the tracks as it slews, thus being safer and more user friendly when used in a confined space. This type of machine is now widely used throughout the world.
There are two main types of "Control" configuration generally use in excavators to control the boom and bucket, both of which spread the four main digging controls between two x-y joysticks. This allows a skilled operator to control all four functions simultaneously. The most popular configuration in the US is the SAE controls configuration while in other parts of the world, the ISO control configuration is more common. Some manufacturers such as Takeuchi have switches that allow the operator to select which control configuration to use.
Excavator attachments
Hydraulic excavator capabilities have expanded far beyond excavation tasks with buckets. With the advent of hydraulic-powered attachments such as a breaker, a grapple or an auger, the excavator is frequently used in many applications other than excavation. Many excavators feature a quick coupler for simplified attachment mounting, increasing the machine's utilization on the jobsite. Excavators are usually employed together with loaders and bulldozers. Most wheeled, compact and some medium-sized (11 to 18-tonne) excavators have a backfill (or dozer) blade. This is a horizontal bulldozer-like blade attached to the undercarriage and is used for levelling and pushing removed material back into a hole.
Notable manufacturers
- Bobcat Company
- Bucyrus International
- Case CE
- Caterpillar Inc.
- CNH Global
- Doosan Infracore (formerly Daewoo Heavy Industries & Machinery) - including Solar brand
- ENMTP
- Hitachi Construction Machinery
- Hydrema
- Hyundai Heavy Industries
- John Deere
- J. C. Bamford (JCB)
- Kanga Loaders
- Komatsu Limited
- LBX (Link-Belt) Excavators
- ThyssenKrupp
- Kobelco
- Kubota
- Liebherr
- LiuGong
- L&T
- Mitsubishi Heavy Industries
- New Holland
- Orenstein & Koppel (O&K)
- Poclain
- Samsung Group
- Sandvik Mining and Construction
- Sany
- ST Kinetics
- Tata Hitachi Construction Machinery
- Terex Corporation
- Uralvagonzavod
- Volvo Construction Equipment
- Wacker Neuson
- XCMG
- Yanmar
- Mahindra
See also
- Types of excavator
- Compact excavator
- Dragline excavator
- Long reach excavator
- Amphibious excavator
- Power shovel
- Steam shovel
- Suction excavator
- Walking Excavator
- Bucket-wheel excavator
- Other
- Bulldozer
- Civil engineering
- Heavy equipment
- Loader (equipment)
- Mining simulation
- Tractor
- Skid Steer Loader
- SAE controls
References
- ^ "Use Powerful Excavator Building Tamiami Trail". The Weekly Miami Metropolis. September 15, 1916. Retrieved 29 December 2013.
- ^ "Industrial Expe ..Lasso Gives More Power To The Hy-Mac Elbow". The Glasgow Herald. June 9, 1962. Retrieved 29 December 2013.
- ^ "First Wind Farm In Nh To Begin Operation". Bangor Daily News. Jan 9, 2006. Retrieved 29 December 2013.
- ^ -F, Kevin. "Types of Excavators and Their Uses". Retrieved 29 December 2013.
- ^ "Komatsu PW130-7". H.E. Services. Retrieved 13 April 2010.
- ^ "Tips to Help You Operate Your Mini Excavator". Retrieved 29 December 2013.
- ^ How it works: The track motor spool in an Excavator
- ^ http://www.yanmar.com/construction/products/excavators/
External links
|
Wikimedia Commons has media related to Excavators. |
- Hydraulic Crawler Excavators Product Reviews, Specs and Buying Files
- NIOSH Publication: Preventing Injuries When Working With Hydraulic Excavators and Backhoe Loaders
- Excavators Used as Cranes
- Safety Alert: Excavators Used as Cranes
- "Big Shovels and Why" Popular Mechanics, March 1930, pp 466-470
