|
|
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (July 2009) |
| Bone: Clavicle |
|
|
| Clavicle (shown in red) |
|
|
| Latin |
Clavicula |
| Gray's |
subject #49 200 |
| MeSH |
Clavicle |
In human anatomy, the clavicle or collarbone is a long bone of short length that serves as a strut between the scapula and the sternum. It is the only long bone in the body that lies horizontally. It makes up part of the shoulder and the pectoral girdle and is palpable in all people, and, in people who have less fat in this region, the location of the bone is clearly visible as it creates a bulge in the skin. It receives its name from the Latin: clavicula ("little key") because the bone rotates along its axis like a key when the shoulder is abducted.
|
Contents
- 1 Human anatomy
- 1.1 Medial end
- 1.2 Lateral end
- 1.3 Shaft
- 1.3.1 Medial two-thirds of the shaft
- 1.3.2 Lateral third of the shaft
- 1.4 Attachments
- 1.5 Functions
- 1.6 Development
- 1.7 Variations
- 1.8 Common clavicle injuries
- 2 Evolutionary variation
- 3 Additional images
- 4 See also
- 5 References
- 6 External links
|
Human anatomy [edit]
The clavicle is a doubly curved short bone that connects the arm (upper limb) to the body (trunk), located directly above the first rib. It acts as a strut to keep the scapula in place so the arm can hang freely. Medially, it articulates with the manubrium of the sternum (breast-bone) at the sternoclavicular joint. At its lateral end it articulates with the acromion of the scapula (shoulder blade) at the acromioclavicular joint. It has a rounded medial end and a flattened lateral end.
|
| Right clavicle—from below, and from above |
|
| Left clavicle—from above, and from below |
From the roughly pyramidal sternal end, each clavicle curves laterally and anteriorly for roughly half its length. It then forms a smooth posterior curve to articulate with a process of the scapula (acromion). The flat acromial end of the clavicle is broader than the sternal end. The acromial end has a rough inferior surface that bears a prominent line, the trapezoid line, and a small rounded projection, the conoid tubercle. These surface features are attachment sites for muscles and ligaments of the shoulder.
It can be divided into three parts: medial end, lateral end and shaft.
Medial end [edit]
The medial end is quadrangular and articulates with the clavicular notch of the menubrium sterni to form the sternoclavicular joint. The articular surface extends to the inferior aspect for attachment with the first costal cartilage.
It gives attachments to:
- fibrous capsule joint all around
- articular disc superoposteriorly
- interclavicular ligament superiorly
Lateral end [edit]
The lateral end is flat from above downward. It bears a facet for attachment to the acromion process of the scapula, forming the acromioclavicular joint. The area surrounding the joint gives an attachment to the joint capsule.
Shaft [edit]
The shaft is divided into the medial two-thirds and the lateral third. The medial two-thirds is thicker than the lateral third.
Medial two-thirds of the shaft [edit]
The medial two-thirds of the shaft has four surfaces and no borders.
The anterior surface is convex forward and gives origin to the pectoralis major. The posterior surface is smooth and gives origin to the sternohyoid muscle at its medial end. The superior surface is rough at its medial part and gives origin to the sternocleidomastoid muscle. The inferior surface has an oval impression at its medial end for the costoclavicular ligament. At the lateral side of inferior surface, there is a subclavian groove for insertion of the subclavius muscle. At the lateral side of the subclavian groove, the nutrient foramen lies. The medial part is quadrangular in shape where it makes a joint with the manubrium of the sternum at the sternoclavicular joint. The margins of the subclavian groove give attachment to the clavipectoral fascia.
Lateral third of the shaft [edit]
The lateral third of the shaft has two borders and two surfaces.
The anterior border is concave forward and gives origin to the deltoid muscle. The posterior border is convex backward and gives attachment to the trapezius muscle. The superior surface is subcutaneous. The inferior surface has a ridge called the trapezoid line and a tubercle; the conoid tubercle for attachment with the trapezoid and the conoid part of the coracoclavicular ligament that serves to connect the clavicle with the coracoid process of the scapula.
Attachments [edit]
Muscles and ligaments that attach to the clavicle include:
| Attachment on clavicle |
Muscle/Ligament |
Other attachment |
| Superior surface and anterior border |
Deltoid muscle |
deltoid tubercle, anteriorly on the lateral third |
| Superior surface |
Trapezius muscle |
posteriorly on the lateral third |
| Inferior surface |
Subclavius muscle |
subclavian groove |
| Inferior surface |
Conoid ligament (the medial part of the coracoclavicular ligament) |
conoid tubercle |
| Inferior surface |
Trapezoid ligament (the lateral part of the coracoclavicular ligament) |
trapezoid line |
| Anterior border |
Pectoralis major muscle |
medial third (rounded border) |
| Posterior border |
Sternocleidomastoid muscle (clavicular head) |
superiorly, on the medial third |
| Posterior border |
Sternohyoid muscle |
inferiorly, on the medial third |
| Posterior border |
Trapezius muscle |
lateral third |
The levator claviculae muscle, present in 2–3% of people, originates on the transverse processes of the upper cervical vertebrae and is inserted in the lateral half of the clavicle.
A vertical line drawn from the mid-clavicle called the mid-clavicular line is used as a reference in describing cardiac apex beat during medical examination.
Functions [edit]
The clavicle serves several functions:[1]
- It serves as a rigid support from which the scapula and free limb (arm) are suspended; an arrangement that keeps the upper limb away from the thorax so that the arm has maximum range of movement. Acting as a flexible, crane-like strut, it allows the scapula to move freely on the thoracic wall.
- Covering the cervicoaxillary canal, it protects the neurovascular bundle that supplies the upper limb.
- Transmits physical impacts from the upper limb to the axial skeleton.
Development [edit]
The clavicle is the first bone to begin the process of ossification (laying down of minerals onto a preformed matrix) during development of the embryo, during the fifth and sixth weeks of gestation. However, it is one of the last bones to finish ossification at about 21–25 years of age, and a study measuring 748 males and 252 females saw a difference in clavicle length between age groups 18–20 and 21–25 of about 6 and 5 mm (0.24 and 0.20 in) for males and females respectively.[2] Its lateral end is formed by intramembranous ossification while medially it is formed by endochondral ossification. It consists of a mass of cancellous bone surrounded by a compact bone shell. The cancellous bone forms via two ossification centres, one medial and one lateral, which fuse later on. The compact forms as the layer of fascia covering the bone stimulates the ossification of adjacent tissue. The resulting compact bone is known as a periosteal collar.
Even though it is classified as a long bone, the clavicle has no medullary (bone marrow) cavity like other long bones, though this is not always true.[citation needed] It is made up of spongy (trabecular) bone with a shell of compact bone.[1] It is a dermal bone derived from elements originally attached to the skull.
Variations [edit]
The shape of the clavicle varies more than most other long bones. It is occasionally pierced by a branch of the supraclavicular nerve. In males it is thicker and more curved and the sites of muscular attachments are more pronounced. The right clavicle is usually stronger and shorter than the left clavicle.[1] In females the clavicle is thinner, smoother and lighter than that of males. Clavicle form is a reliable criterion for sex determination.
The collarbones are sometimes partly or completely absent in cleidocranial dysostosis.
Common clavicle injuries [edit]
- Acromioclavicular dislocation ("AC Separation")
- Clavicle fractures
- Degeneration of the clavicle
- Osteolysis
- Sternoclavicular dislocations
Evolutionary variation [edit]
The clavicle first appears as part of the skeleton in primitive bony fish, where it is associated with the pectoral fin; they also have a bone called the cleithrum. In such fish, the paired clavicles run behind and below the gills on each side, and are joined by a solid symphysis on the fish's underside. They are, however, absent in cartilaginous fish and in the vast majority of living bony fish, including all of the teleosts.[3]
The earliest tetrapods retained this arrangement, with the addition of a diamond-shaped interclavicle between the base of the clavicles, although this is not found in living amphibians. The cleithrum disappeared early in the evolution of reptiles, and is not found in any living amniotes, but the interclavicle is present in most modern reptiles, and also in monotremes. In modern forms, however, there are a number of variations from the primitive pattern. For example, crocodilians and salamanders lack clavicles altogether (although crocodilians do retain the interclavicle), while in turtles, they form part of the armoured plastron.[3]
In birds, the clavicles and interclavicle have fused to form a single Y-shaped bone, the furcula or "wishbone".
The interclavicle is absent in marsupials and placental mammals. In many mammals, the clavicles are also reduced, or even absent, to allow the scapula greater freedom of motion, which may be useful in fast-running animals.[3]
Though a number of fossil hominin (humans and chimpanzees) clavicles have been found, most of these are mere segments offering limited information on the form and function of the pectoral girdle. One exception is the clavice of AL 333x6/9 attributed to Australopithecus afarensis which has a well-preserved sternal end. One interpretation of this specimen, based on the orientation of its lateral end and the position of the deltoid attachment area, suggests that this clavicle is distinct from those found in extant apes (including humans), and thus that the shape of the human shoulder dates back to less than 3 to 4 million years ago. However, analyses of the clavicle in extant primates suggest that the low position of the scapula in humans is reflected mostly in the curvature of the medial portion of the clavicle rather than the lateral portion. This part of the bone is similar in A. afarensis and it is thus possible that this species had a high shoulder position similar to that in modern humans.[4]
Additional images [edit]
|
|
|
Position of clavicle (shown in red). Animation.
|
|
|
|
Shape of clavicle (left). Animation.
|
|
|
|
Diagram of the human shoulder joint
|
|
|
|
Sternoclavicular articulation. Anterior view.
|
|
|
|
The left shoulder and acromioclavicular joints, and the proper ligaments of the scapula
|
|
|
|
Muscles of the neck. Lateral view.
|
|
|
|
Muscles of the neck. Anterior view.
|
|
|
|
Anterolateral view of head and neck
|
|
See also [edit]
- Bone terminology
- Terms for anatomical location
- Clavicle fracture
References [edit]
- ^ a b c Moore, Keith L.; Dalley, Arthur F. (1999). Clinically Oriented Anatomy (4th ed.). Lippincott Williams & Wilkins. ISBN 978-0-683-06141-3.
- ^ http://medind.nic.in/jae/t02/i2/jaet02i2p199.pdf
- ^ a b c Romer, Alfred Sherwood; Parsons, Thomas S. (1977). The Vertebrate Body. Philadelphia, PA: Holt-Saunders International. pp. 184–186. ISBN 0-03-910284-X.
- ^ Larson, Susan G. (2009). "Evolution of the Hominin Shoulder: Early Homo". In Grine, Frederick E.; Fleagle, John G.; Leakey, Richard E. The First Humans - Origin and Early Evolution of the Genus Homo. Springer. p. 66. doi:10.1007/978-1-4020-9980-9. ISBN 978-1-4020-9979-3.
External links [edit]
|
Bones of upper limbs (TA A02.4, GA 2.200–230)
|
|
| Pectoral girdle, clavicle |
- conoid tubercle
- trapezoid line
- costal tuberosity
- subclavian groove
|
|
| Scapula |
- fossae (subscapular, supraspinatous, infraspinatous)
- notches (suprascapular, great scapular)
- glenoid cavity
- tubercles (infraglenoid, supraglenoid)
- spine of scapula
- acromion
- coracoid process
- borders (superior, lateral/axillary, medial/vertebral)
- angles (superior, inferior, lateral)
|
|
| Humerus |
- upper extremity: necks (anatomical, surgical)
- tubercles (greater, lesser)
- intertubercular sulcus
- body: radial sulcus
- deltoid tuberosity
- lower extremity: capitulum
- trochlea
- epicondyles (lateral, medial)
- supracondylar ridges (lateral, medial)
- fossae (radial, coronoid, olecranon)
|
|
| Forearm |
- radius: upper extremity (head, tuberosity)
- body
- lower extremity (ulnar notch, styloid process)
- ulna: upper extremity (tuberosity, olecranon, coronoid process, radial notch, trochlear notch)
- body
- lower extremity (head, styloid process)
|
|
| Hand |
- carpus: scaphoid
- lunate
- triquetral
- pisiform
- trapezium
- trapezoid
- capitate
- hamate (hamulus)
- metacarpus: 1st metacarpal
- 2nd
- 3rd
- 4th
- 5th
- phalanges of the hand: proximal
- intermediate
- distal
|
|
|
|
anat (c/f/k/f, u, t/p, l)/phys/devp/cell
|
noco/cong/tumr, sysi/epon, injr
|
|
|
|
|
