articulated lorry

　

WordNet

1. unite by forming a joint or joints; "the ankle bone articulates with the leg bones to form the ankle bones"
2. express or state clearly (同)enunciate, vocalize, vocalise
3. expressing yourself easily or characterized by clear expressive language; "articulate speech"; "an articulate orator"; "articulate beings"
4. a large truck designed to carry heavy loads; usually without sides (同)camion
5. a large low horse-drawn wagon without sides
6. consisting of segments held together by joints (同)articulate

PrepTutorEJDIC

1. 《英》=truck trailer
2. (音節や単語が)はっきり話される,分節的な / (自分の考えなど)はっきりと表現できる;(人が)考えを口に出せる / (動物が)関節のある / 〈語・音節〉'を'はっきり発音する / 〈気持・考えなど〉'を'はっきり表現する / …'を'関節でつなぐ,接合する
3. 貨物自動車,(特に大型の)トラック)《米》truck)

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2016/04/01 03:18:47」(JST)

wiki en

[Wiki en表示]

"18 wheeler" and "eighteen wheeler" redirect here. For other uses, see 18 wheeler (disambiguation).

"Big Rig" redirects here. For other uses, see Big Rig (disambiguation).

Semi-trailer tractor with sleeper behind the cab and oversize load on lowboy trailer

Tractor with a dump trailer

A tractor with an auto-transport semi-trailer

FAW semi-trailer truck in China

A semi-trailer truck is the combination of a tractor unit and one or more semi-trailers to carry freight. It is variously known as a transport (truck) in Canada; semi or single in Australia; semi, tractor-trailer, big rig, or eighteen-wheeler in the United States; articulated lorry, abbreviated artic, in Britain and Ireland.

A semi-trailer attaches to the tractor with a fifth wheel hitch, with much of its weight borne by the tractor. The result is that both tractor and semi-trailer will have a distinctly different design than a rigid truck and trailer.

Regional configurations

North America

Tractor unit hauling tractor units in Idaho

In North America, the combination vehicles made up of a powered truck and one or more detachable trailers, are known as semi-tractor-trailers, tractor-trailers, semis, big rigs, semi trucks or eighteen-wheelers.

Trucks

The tractors, or powered trucks, typically have two or three axles; those built for hauling heavy-duty commercial-construction machinery may have as many as four or five axles, some often being lift axles.

The most common tractor-cab layout has a forward engine, one steering axle, and two drive axles. The fifth-wheel trailer coupling on most tractor trucks is movable fore and aft, to allow adjustment in the weight distribution over its rear axle(s).

Ubiquitous in Europe, but less common in North America since the 1990s, is the cabover configuration, where the driver sits next to, or over the engine. With changes in the US to the maximum length of the combined vehicle, the cabover was mostly phased out of North American over-the-road or long-haul service by 2007. Cabovers were notorious for being difficult to service, as the cab could not be lifted on its hinges to a full 90-degree forward tilt, and this severely limited access to the front part of the engine.

Trucks average between 4 and 8 miles per US gallon (1.7 and 3.4 km/L), with fuel economy standards requiring more than 7 miles per US gallon (3.0 km/L) efficiency by 2014.

Trailers

Rocky Mountain Double

STAA double pup 28.5 foot trailers

The cargo trailer usually has a tandem axle pair at the rear, each of which has dual wheels, or eight wheels on the trailer, four per axle. The combination of eight tires on the trailer and ten tires on the tractor is what led to the moniker eighteen wheeler, although this term is considered by some truckers to be a misnomer. Many trailers are equipped with movable tandem axles to allow adjusting the weight distribution.

The United States also allows two-axle tractors to pull two single-axle 28.5 ft (8.7 m) semi-trailers, known officially as STAA doubles, and colloquially as doubles, a set, or a set of joints, on all highways that are part of the national network.

To connect the second of a set of doubles to the first trailer, and to support the front half of the second trailer, a converter gear, also known as a con-gear or dolly is used. This apparatus has one or two axles, a fifth-wheel coupling for the rear trailer, and a tongue with a ring-hitch coupling for the forward trailer. Individual states may further allow longer vehicles, known as "longer combination vehicles" (or LCVs), and may allow them to operate on roads other than those that are part of the national network.

Long Combination Vehicle types include:

• Triples: Three 28.5 ft (8.7 m) trailers; maximum weight up to 129,000 lb (59,000 kg).
• Turnpike Doubles: Two 48 ft (14.6 m) trailers; maximum weight up to 147,000 lb (67,000 kg)
• Rocky Mountain Doubles: One 40-to-53 ft (12.2-to-16.2 m) trailer (though usually no more than 48 ft or 14.6 m) and one 28.5 ft (8.7 m) trailer (known as a "pup"); maximum weight up to 129,000 lb (59,000 kg)
• In Canada, a Turnpike Double is two 53 ft (16.2 m) trailers, and a Rocky Mountain Double is a 50 ft (15.2 m) trailer with a 24 ft (7.3 m) "pup".

Future LCV's under consideration and study for the U.S. MAP-21 transportation bill are container doubles. These combinations are under study for potential recommendation in November 2014:

• 40 ft (12 m) trailer Turnpike Doubles, 148,000 lb (67,000 kg) GVWR
• 40 and 20 ft (12 and 6.1 m) trailer Rocky Mountain Doubles, 134,000 lb (61,000 kg) GVWR
• Double 20 ft (6.1 m) trailer Doubles, 120,000 lb (54,000 kg) GVWR

Regulations on LCVs vary widely from one state or province to another. None allows more than three trailers without a special permit. Reasons for limiting the legal trailer configurations include both safety concerns and the impracticality of designing and constructing roads that can accommodate the larger wheelbase of these vehicles and the larger minimum turning radii associated with them.

Most states restrict operation of larger tandem trailer setups such as triple units, turnpike doubles and Rocky-Mountain doubles. In general, these configurations are restricted to turnpikes. Except for these units, tandem setups are not restricted to certain roads any more than a single setup. They are also not restricted by weather conditions or "difficulty of operation". The Canadian province of Ontario, however, does have weather-related operating restrictions for larger tandem trailer setups.

In the United States, 80,000 lb (36,000 kg) is the maximum allowable legal gross vehicle weight without a permit.

The axle-weight breakdown is:

• 20,000 lb (9,072 kg) maximum on a single axle
• 34,000 lb (15,422 kg) maximum on the tandem axles

Over-length and overweight permits are issued by each individual state whose roads will be traveled. The permits are usually issued in advance, for a specific period of time, over a specific route, with a specific load. Most over-length loads require one or more escort vehicles. An escort is an accompanying automobile and its driver, who communicates with the driver of the payload vehicle regarding the position of the load in relation to the road and shoulder, and about other situational considerations.

A trailer's dimensions can vary greatly, depending on the amount and type of cargo it is designed to haul. In the United States, they are normally limited to 8.5 feet (2.6 m) in width. (See types of trailers under Construction, below.)

Europe

A semi-trailer truck (Renault Magnum) in London, England

The noticeable difference between tractor units in North America and Europe is that almost all European models are cab over engine (COE or forward control), while the majority of North American trucks are conventional (or normal control). For repairs, the entire cab hinges forward to allow maintenance access. European trucks, whether rigid or fully articulated, have a sheer face on the front. This allows for shorter trucks with longer trailers (with larger freight capacity) within the legal maximum total length. Furthermore, it offers greater manoeuvrability and better overview for the driver. Conversely, conventional cab tractors offer the driver a more comfortable driving environment and better protection in a collision as well as eliminating the need to empty the driver's personal effects from the tractor whenever the engine requires service.

In Europe usually only the rear tractor axle has twin wheels, while wider single wheels (sometimes called "super singles") are used for the cargo trailer. The most common combination used in Europe is a semi tractor with two axles and a cargo trailer with three axles, giving five axles and 12 wheels in total. Lesser used (common in Scandinavia) are tractors with three axles, which feature twin wheels either on one or both rear axles. In addition to the most common three axles variant, cargo trailers with only two or only one axle are in use, again usually with larger single wheels.

In Sweden, lumber and long distance freight is run on seven or eight axle combinations up to 25.25 m (82.8 ft) long and 64 tonnes (141,000 lb) in weight. Semi-trailers are used for short distance freight. Under the En Trave Till ("One More Pile") research project, a modified lumber transport is being run at 30 m (98 ft) long and 90 tonnes (200,000 lb) in an effort to change Swedish load limit legislation. In Finland, since 1 October 2013, law N 407/2013 allows 76 tonnes maximum if the truck has nine axles, and 68 tonnes maximum if the truck has eight axles. The truck can be 25.25 m long and 4.4 m (14 ft) high in both cases. The forest sector plans to submit to the Finnish Transport Safety Agency an application for testing semi-trailer trucks 30 m long and weighing 90 tonnes on Finnish roads, similar to the En Trave Till project.

United Kingdom

Semi-trailer trucks with extended tents, representing Renault at Silverstone

In the United Kingdom, the maximum permitted gross weight of a semi-trailer truck, without the use of a Special Type General Order (STGO), is 44,000 kg (97,000 lb), which is the second heaviest permitted legal weight for a single semi-trailer truck in the world (50,000 kg (110,000 lb) is allowed in the Netherlands). In order for a 44 tonne semi-trailer truck to be permitted on UK roads the tractor and semi-trailer must have three or more axles each. Lower weight semi-trailer trucks can mean some tractors and trailer having fewer axles. In practice, like double decker buses and coaches in the UK, there is no legal height limit for semi-trailer trucks; however, bridges over 5.03 m (16.5 ft) do not have the height marked on them. Semi-trailer trucks on Continental Europe have a height limit of 4.0 m (13.1 ft).

Vehicles heavier than 44,000 kg are permitted on UK roads but are indivisible loads, which would be classed as abnormal (or oversize). Such vehicles are required to display an STGO (Special Types General Order) plate on the front of the tractor unit and, under certain circumstances, are required to travel by an authorized route and have an escort.

Most UK trailers are 13.7 m (45 ft) long and, dependent on the position of the fifth wheel and kingpin, a coupled tractor unit and trailer will have a combined length of between 15.25 and 16.75 m (50 and 55 ft). Although the Construction and Use Regulations allow a maximum rigid length of 18.2 m (60 ft), this, combined with a shallow kingpin and fifth wheel set close to the rear of the tractor unit, can give an overall length of around 22.75 m (75 ft), although combinations of this length are usually used only to carry steel or concrete beams. Providing certain requirements are fulfilled, a Special Types General Order (STGO) allows for vehicles of any size or weight to travel on UK roads. However, in practice any such vehicle has to travel by a route authorized by the Department of Transport and move under escort. The escort of abnormal loads in the UK is now predominantly carried out by private companies, but extremely large or heavy loads that require road closures must still be escorted by the police.

In the UK, some articulated trucks have eight tyres on three axles on the tractor; these are known as six-wheelers or "six leggers", with either the center or rear axle having single wheels which normally steer as well as the front axle and can be raised when not needed (i.e. when unloaded or only a light load is being carried; an arrangement known as a TAG axle when it is the rear axle, or mid-lift when it is the center axle). Some trailers have two axles which have twin wheels on each axle; other trailers have three axles, of which one axle can be a lift axle which has super-single wheels. In the UK, two wheels bolted to the same hub are classed as a single wheel, therefore a standard six-axle articulated truck is considered to have twelve wheels, even though it has twenty tyres. The UK also allows articulated truck tractors which have six tires on two axles; these are known as four-wheelers.

Denby Eco-Link B-Train

In 2009, the operator Denby Transport designed and built a 25.25-metre-long B-Train (or B-Double) semi-trailer truck called the Denby Eco-Link to show the benefits of such a vehicle, which were a reduction in road accidents and result in less road deaths, a reduction in emissions due to the one tractor unit still being used and no further highway investment being required. Furthermore, Denby Transport asserted that two Eco-Links would replace three standard semi-trailer trucks while, if limited to the current UK weight limit of 44 tonnes, it was claimed the Eco-Link would reduce carbon emissions by 16% and could still halve the number of trips needed for the same amount of cargo carried in conventional semi-trailer trucks. This is based on the fact that for light but bulky goods such as toilet paper, plastic bottles, cereals and aluminum cans, conventional semi-trailer trucks run out of cargo space before they reach the weight limit. At 44 tonnes, as opposed to 60 tonnes usually associated with B-Trains, the Eco-Link also exerts less weight per axle on the road compared to the standard six-axle 44 tonne articulated combination.

The vehicle was built after Denby Transport believed they had found a legal-loophole in the present UK law to allow the Eco-Link to be used on the public roads. The relevant legislation concerned the 1986 Road Vehicles Construction and Use Regulations. The 1986 regulations state that "certain vehicles" may be permitted to draw more than one trailer and can be up to 26 m (85 ft). The point of law reportedly hinged on the definition of a "towing implement", with Denby prepared to argue that the second trailer on the Eco-Link was one. The Department for Transport were of the opinion that this refers to recovering a vehicle after an accident or breakdown, but the regulation does not explicitly state this.

During BTAC performance testing the Eco-Link was given an "excellent" rating for its performance in maneuverability, productivity, safety and emissions tests, superseding ordinary semi-trailer trucks in many respects. Private trials had also reportedly shown the Denby vehicle had a 20% shorter stopping distance than conventional semi-trailer trucks of the same weight, due to having extra axles. The active steer system meant that the Eco-Link had a turning circle of 12 m (41 ft), the same as a conventional semi-trailer truck.

Although the Department for Transport advised that the Eco-Link was not permissible on public roads, Denby Transport gave the Police prior warning of the timing and route of the test drive on the public highway, as well as outlining their position in writing to the Eastern Traffic Area Office. On 1 December 2009 Denby Transport were preparing to drive the Eco-Link on public roads, but this was cut short because the Police pulled the semi-trailer truck over as it left the gates in order to test it for its legality "to investigate any... offences which may be found". The Police said the vehicle was unlawful due to its length and Denby Transport was served with a notice by the Vehicle and Operator Services Agency (VOSA) inspector to remove the vehicle from the road for inspection. Having returned to the yard, Denby Transport was formally notified by Police and VOSA that the semi-trailer truck could not be used. Neither the Eco-Link, nor any other B-Train, have since been permitted on UK roads. However, this prompted the Department for Transport to undertake a desk study in to semi-trailer trucks, which has resulted in the longer semi-trailer trial which commenced in 2012.

Longer semi-trailers

Starting in January 2012 the Department for Transport is conducting a trial of longer semi-trailers. The trial involves 900 semi-trailers of 14.6 m (48 ft) in length (i.e. 1 m (3.3 ft) longer than the current maximum), and a further 900 semi-trailers of 15.65 m (51.3 ft) in length (i.e. 2.05 m (6.7 ft) longer). This will result in the total maximum length of the semi-trailer truck being 17.5 m (57 ft) for trailers 14.6 m in length, and 18.55 m (60.9 ft) for trailers 15.65 m in length. The increase in length will not result in the 44,000 kg weight limit being exceeded and will allow some operators to approach the weight limit which may not have been previously possible due to the previous length of trailers. The trial will run for a maximum of 10 years.

Continental Europe

The maximum overall length applying in the EU and EEA member states is 18.75 m (61.5 ft) with a maximum weight of 40 tonnes, or 44 tonnes if carrying an ISO container. However, rules limiting the semi-trailers to 16.5 m (54 ft) and 18.75 m are met with trucks carrying a standardized 7.82 m (25.7 ft) body with one additional 7.82 m body on tow as a trailer. Since 1996, when Sweden and Finland formally won a final exemption from the European Economic Area rules with 60 tonne and 25.25 m (83 ft) combinations, all other member states gained the ability to adopt the same rules. In Italy the maximum permitted weight (unless exceptional transport is authorized) is 44 tonnes for any kind of combination with five axles or more.

Maximum lengths

All EuroCombi variants being considered for Europe-wide adoption

The 25.25 metre truck combinations were developed under the branding of EcoCombi which influenced the name of EuroCombi for an ongoing standardization effort where such truck combinations shall be legal to operate in all jurisdictions of the European Economic Area. With the 50% increase in cargo weight, the fuel efficiency increases with an average of 20% with a corresponding relative decrease in carbon emissions and with the added benefit of one third fewer trucks on the road. The 1996 EU regulation defines a Europe Module System (EMS) as it was implemented in Sweden. The wording of EMS combinations and EuroCombi are now used interchangeably to point to truck combinations as specified in the EU document; however apart from Sweden and Finland the EuroCombi is only allowed to operate on specific tracks in other EU member states.

From 2006, 25.25 m truck trailer combinations are to be allowed on restricted routes within Germany, following a similar (on-going) trial in The Netherlands. Similarly, Denmark have allowed 25.25 m combinations on select routes. Like in Sweden and Finland, these vehicles in continental Europe will run a 60 tonne weight limit. Two types are to be used: 1) a 26 tonne truck pulling a dolly and semi-trailer, or 2) an articulated tractor unit pulling a B-double. The UK government has so far decided not to have its own trial of these 60 tonne vehicles, but to keep an eye on the other countries' trials.

When using a dolly, which generally has to be equipped with lights and a license plate, rigid trucks can be used to pull semi-trailers. The dolly is equipped with a fifth wheel to which the trailer is coupled. Because the dolly attaches to a pintle hitch on the truck, manoeuvrings a trailer hooked to a dolly is different from maneuvering a fifth wheel trailer. Backing the vehicle requires same technique as backing an ordinary truck/full trailer combination, though the dolly/semi setup is probably longer, thus requiring more space for maneuvering. The tractor/semi-trailer configuration is rarely used on timber trucks, since these will use the two big advantages of having the weight of the load on the drive wheels, and the loader crane used to lift the logs from the ground can be mounted on the rear of the truck behind the load, allowing a short (lightweight) crane to reach both ends of the vehicle without uncoupling. Also construction trucks are more often seen in a rigid + midaxle trailer configuration instead of the tractor/semi-trailer setup.

Scandinavia, Finland, and the Netherlands

A truck with a swap body pulling a trailer using a dolly; the overall length is 25.25 m (83 ft)

Denmark, the Netherlands and Norway all allow 25.25 m (83 ft) trucks (the Netherlands from 2000, Denmark from 2008, and Norway from 2008 on selected routes).

In Sweden, the allowed length has been 24 m (79 ft) since 1967. Before that, the maximum length was unlimited; the only limitations were on axle load. What stopped Sweden from adopting the same rules as the rest of Europe, when securing road safety, was the national importance of a competitive forestry industry. Finland, with the same road safety issues and equally important forestry industry, followed suit. The change made trucks able to carry three stacks of cut-to-length logs instead of two, as it would be in a short combination. They have one on stack together with a crane on the 6×4 truck, and two additional stacks on a four axle trailer. The allowed gross weight in both countries is up to 60 tonnes depending on the distance between the first and last axle.

In the negotiations starting in the late 1980s preceding the two countries' entries to the European Economic Area and later the European Union, they insisted on exemptions from the EU rules citing environmental concerns and the transportation needs of the logging industry. In 1995, after Sweden and Finland's entry to the union, the rules changed again, this time to allow trucks carrying a standard CEN unit of 7.82 m (26 ft) to draw a 13.6 m (45 ft) standard semi-trailer on a dolly, a total overall length of 25.25 m. Later, B-double combinations came into use, often with one 6 m (20 ft) container on the B-link and a 12 m (40 ft) container (or two 6 m containers) on a semi-trailer bed. In allowing the longer truck combinations, what would take two 16.5 m (54 ft) semi-trailer trucks and one 18.75 m (62 ft) truck and trailer to haul on the continent now could be handled by just two 25.25 m trucks - greatly reducing overall costs and emissions. Prepared since late 2012 and effective on January 2013, Finland has changed its regulations to allow total maximum legal weight of a combination to be 76 tonnes. At the same time the maximum allowed height would be increased by 20 cm (8 in); from current maximum of 4.2 m (13.8 ft) to 4.4 m (14.4 ft). The effect this major maximum weight increase would cause to the roads and bridges in Finland over time is strongly debated.

However, longer and heavier combinations are regularly seen on public roads; special permits are issued for special cargo. The mining company Boliden AB have a standing special permit for 80 tonne combinations on select routes between mines in the inland and the processing plant in Boliden, taking a 50 tonne load of ore. Volvo has a special permit for a 32 m (105 ft), steering B-trailer-trailer combination carrying two 12 m (40 ft) containers to and from Gothenburg harbour and the Volvo Trucks factory, all on the island of Hisingen. Another example is the ongoing project En Trave Till (lit. One more pile/stack) started in December 2008. It will allow even longer vehicles to further rationalize the logging transports. As the name of the project points out, it will be able to carry four stacks of timber, instead of the usual three. The test is limited to Norrbotten county and the European route E4 between the timber terminal in Överkalix and the sawmill in Munksund (outside Piteå). The vehicle is a 30 m (98 ft) long truck trailer combination with a gross weight exceeding 90 tonnes. It is estimated that this will give a 20% lower cost and 20-25% CO2 emissions reduction compared to the regular 60 tonne truck combinations. As the combinations spreads its weight over more axles, braking distance, road wear and traffic safety is believed to be either the same or improved with the 90 tonne truck-trailer. In the same program two types of 74 tonne combinations will be tested in Dalsland and Bohuslän counties in western Sweden: an enhanced truck and trailer combination for use in the forest and a b-double for plain highway transportation to the mill in Skoghall. In 2012, the Northland Mining company received permission for 90 tonne combinations with normal axle load (an extra dolly) for use on the 150 km (93 mi) Kaunisvaara-Svappavaara route, carrying iron ore.

Australia

Main article: Road transport in Australia

Australian road transport has a reputation for using very large trucks and road trains. This is reflected in the most popular configurations of trucks generally having dual drive axles and three axles on the trailers, with four tires on each axle. This means that Australian single semi-trailer trucks will usually have 22 wheels, which is generally more than their counterparts in other countries. Long haul transport usually operates as B-doubles with two trailers (each with three axles), for a total of nine axles (including steering). In some lighter duty applications only one of the rear axles of the truck is driven, and the trailer may have only two axles.

From July 2007, the Australian Federal and State Governments allowed the introduction of B-triple trucks on a specified network of roads. B-Triples are set up differently from conventional road trains. The front of their first trailer is supported by the turntable on the prime mover. The second and third trailers are supported by turntables on the trailers in front of them. As a result, B-Triples are much more stable than road trains and handle exceptionally well. True road trains only operate in remote areas, regulated by each state or territory government.

In total, the maximum length that any articulated vehicle may be (without a special permit and escort) is 53.5 m (176 ft), its maximum load may be up to 164 tonnes gross, and may have up to four trailers. However, heavy restrictions apply to the areas where such a vehicle may travel in most states. In remote areas such as the Northern Territory great care must be taken when sharing the road with longer articulated vehicles that often travel during the day time, especially four trailer road trains.

Articulated trucks towing a single trailer or two trailers (commonly known as "short doubles") with maximum overall length of 19 m (62 ft) are referred to as "General access heavy vehicles" and are permitted in all areas, including metropolitan. B-doubles are limited to a maximum total weight of 62.5 tonnes and overall length of 25 m (82 ft), or 26 m (85 ft) if they are fitted with approved FUPS (Front Underrun Protection System) devices. B-doubles may only operate on designated roads, which includes most highways and some major metropolitan roads. B-doubles are very common in all parts of Australia including state capitals and on major routes they outnumber single trailer configurations.

Maximum width of any vehicle is 2.5 m (8.2 ft) and a height of 4.3 m (14 ft). In the past few years, allowance has been made by several states to allow certain designs of heavy vehicles up to 4.6 m (15 ft) high but they are also restricted to designated routes. In effect, a 4.6 meter high B-double will have to follow two sets of rules: they may access only those roads that are permitted for B-doubles and for 4.6 meter high vehicles.

In Australia, both conventional tractor units and cabovers are common, however cabovers are most often seen on B-doubles on the eastern seaboard where the reduction in total length allows the vehicle to pull longer trailers and thus more cargo than it would otherwise.

Super single tires are sometimes used on tri-axle trailers. The suspension is designed with travel limiting, which will hold the rim off the road for one blown or deflated tire for each side of the trailer, so a trailer can be driven at reduced speed to a safe place for repair. Super singles are also often used on the steer axle in Australia to allow greater loading over the steer axle. The increase in loading of steer tires requires a permit.

• An Australian prime mover Kenworth and B double trailer combination

• A road train in Australia

• B-double truck on the Sturt Highway

Semi-truck manufacturers

Current semi-truck manufacturers include:

United States and Canada

• Ford (Co-joined with Navistar International via Dimond Star International joint-Venture)
• Freightliner
• Hino Motors (Canadian plant)
• Kenworth

• Navistar International
• Mack
• Peterbilt
• Volvo Trucks
• Western Star

• Caterpillar Inc
• Oshkosh
• Crane Carrier Corporation

Europe

• ADR Group Trailer
• DAF Trucks
• Mercedes-Benz
• Iveco
• MAN

• Renault Trucks
• Scania
• Volvo Trucks
• MAZ

• Kamaz
• KrAZ
• Tatra
• Sisu
• ZiL

Japan and Asia/Pacific

• Hino Motors
• Nissan Diesel
• Mitsubishi Fuso Truck and Bus Corporation
• Isuzu
• China National Heavy Duty Truck Group
• FAW (China)
• Foton (China)
• CAMC Star (China)
• C&C Trucks (China)
• Asia MotorWorks
• Mahindra Truck and Bus Division
• Tata Motors

Elsewhere

• Al Kowary Industries (Bahrain)
• Ashok Leyland (India)
• BharatBenz (India)
• BMC (Turkey)
• Eicher Motors (India)
• Volkswagen Trucks and Buses (Latin America, South Africa)

Construction

Side view and underside view of a conventional 18-wheeler semi-trailer truck with an enclosed cargo space. The underside view shows the arrangement of the 18 tires (wheels). Shown in blue in the underside view are the axles, drive shaft, and differentials. The legend for labeled parts of the truck is as follows:

1. tractor unit
2. semi-trailer (detachable)
3. engine compartment
4. cabin
5. sleeper (not present in all trucks)
6. air dam
7. fuel tanks
8. fifth wheel coupling
9. enclosed cargo space
10. landing gear - legs for when semi-trailer is detached

11. tandem axles

Types of trailers

Main article: Semi-trailer

There are many types of semi-trailers in use, designed to haul a wide range of products.

• Box, or dry van
• Bus
• Refrigerator, or "reefer"
• Tanker
• Dry bulk
• Flatbed
• Lowboy
• Car hauler
• Dump

Coupling and uncoupling

The cargo trailer is, by means of a king pin, hooked to a horseshoe-shaped quick-release coupling device called a fifth wheel or a turntable hitch at the rear of the towing engine that allows easy hook up and release. The truck trailer cannot move by itself because it only has wheels at the rear end: it requires a forward axle, provided by the towing engine, to carry half the load weight. When braking hard at high speeds, the vehicle has a tendency to fold at the pivot point between the towing vehicle and the trailer. Such a truck accident is called a "trailer swing", although it is also commonly described as a "jackknife". Jackknifing is a condition where the tractive unit swings round against the trailer, and not vice versa.

Braking

A pair of semi-trailer "Suzies" at the back of an Australian prime mover, red line for emergency/supply and blue for control

Semi trucks use air pressure, rather than hydraulic fluid, to actuate the brakes mainly due to the much larger braking forces required. The use of air hoses allows for ease of coupling and uncoupling of trailers from the tractor unit, as well as reducing the potential for problems common to hydraulic systems, such as leakage or brake failure caused when overheated brake fluid vaporizes in the hydraulic lines. The most common failure is brake fade, usually caused when the drums or discs and the linings of the brakes overheat from excessive use.

The parking brake of the tractor unit and the emergency brake of the trailer are spring brakes that require air pressure in order to be released. They are applied when air pressure is released from the system, and disengaged when air pressure is supplied. This is a fail-safe design feature which ensures that if air pressure to either unit is lost, the vehicle will stop to a grinding halt, instead of continuing without brakes and becoming uncontrollable. The trailer controls are coupled to the tractor through two gladhand connectors, which provide air pressure, and an electrical cable, which provides power to the lights and any specialized features of the trailer.

Glad-hand connectors (also known as palm couplings) are air hose connectors, each of which has a flat engaging face and retaining tabs. The faces are placed together, and the units are rotated so that the tabs engage each other to hold the connectors together. This arrangement provides a secure connection, but allows the couplers to break away without damaging the equipment if they are pulled, as may happen when the tractor and trailer are separated without first uncoupling the air lines. These connectors are similar in design to the ones used for a similar purpose between railroad cars. Two air lines typically connect to the trailer unit. An emergency or main air supply line pressurizes the trailer's air tank and disengages the emergency brake, and a second service line controls the brake application during normal operation.

In the UK, male/female quick release connectors (red line or emergency), have a female on the truck and male on the trailer, but a yellow line or service has a male on the truck and female on the trailer. This avoids coupling errors (causing no brakes) plus the connections will not come apart if pulled by accident. The three electrical lines will fit one way around a primary black, a secondary green, and an ABS lead, all of which are collectively known as suzies or suzie coils.

Another braking feature of semi-trucks is engine braking, which could be either a compression brake (usually shortened to Jake brake) or exhaust brake or combination of both. However, the use of compression brake alone produces a loud and distinctive noise, and to control noise pollution, some local municipalities have prohibited or restricted the use of engine brake systems inside their jurisdictions, particularly in residential areas. The advantage to using engine braking instead of conventional brakes is that a truck can descend a long grade without overheating its wheel brakes. Some vehicles can also be equipped with hydraulic or electric retarders which have an advantage of near silent operation.

Transmission

Traditional manual transmissions have 4-5 ratios on main shift and 3-4 on the auxiliary: pictured is a 5×3 with five main ratios and three auxiliaries

Because of the wide variety of loads the semi may carry, they usually have a manual transmission to allow the driver to have as much control as possible. However, all truck manufacturers now offer semi-automatic transmissions (manual gearboxes with automated gear change), as well as automatic transmissions.

Semi-truck transmissions can have as few as three forward speeds or as many as 18 forward speeds (plus 2 reverse speeds). A large number of transmission ratios means the driver can operate the engine more efficiently. Modern on-highway diesel engines are designed to provide maximum torque in a narrow RPM range (usually 1200-1500 RPM); having more gear ratios means the driver can hold the engine in its optimum range regardless of road speed (drive axle ratio must also be considered).

A ten-speed manual transmission, for example is controlled via a six-slot H-box pattern, similar to that in five-speed cars — five forward and one reverse gear. Gears six to ten (and high speed reverse) are accessed by a Lo/High range splitter; gears one to five are Lo range; gears six to ten are High range using the same shift pattern. A Super-10 transmission, by contrast, has no range splitter; it uses alternating "stick and button" shifting (stick shifts 1-3-5-7-9, button shifts 2-4-6-8-10). The 13-, 15-, and 18-speed transmissions have the same basic shift pattern, but include a splitter button to enable additional ratios found in each range. Some transmissions may have 12 speeds.

Another difference between semi-trucks and cars is the way the clutch is set up. On an automobile, the clutch pedal is depressed full stroke to the floor for every gear shift, to ensure the gearbox is disengaged from the engine. On a semi-truck with constant mesh transmission (non synchronized), such as by the Eaton Roadranger series, not only is double clutching required, but a clutch brake is required as well. The clutch brake stops the rotation of the gears, and allows the truck to be put into gear without grinding when stationary. The clutch is pressed to the floor only to allow smooth engagement of low gears when starting from a full stop; when the truck is moving, the clutch pedal is pressed only far enough to break torque for gear changes.

Lights

An electrical connection is made between the tractor and the trailer through a cable often referred to as a pigtail. This cable is a bundle of wires in a single casing. Each wire controls one of the electrical circuits on the trailer, such as running lights, brake lights, turn signals, etc. A straight cable would break when the rig went around corners, so a coiled cable is used which retracts these coils when not under tension. It is these coils that cause the cable to look like a pigtail.

In most countries a trailer or semi-trailer must have minimum

• 2 rear lights (red)
• 2 stop lights (red)
• 2 turning lights; one for right and one for left, flashing (amber; red optional in North America)
• 2 marking lights behind if wider than certain specifications (red; plus a group of 3 red lights in the middle in North America)
• 2 marking lights front if wider than the truck or wider than certain specifications (white; amber in North America)

Wheels and tires

Although dual wheels are the most common, use of two single, wider tires, known as super singles, on each axle is becoming popular among bulk cargo carriers and other weight-sensitive operators. With increased efforts to reduce greenhouse gas emissions, the use of the super-single tire is gaining popularity. There are several advantages to this configuration. The first of these is that super singles reduce fuel consumption. In 1999, tests on an oval track showed a 10% fuel savings when super singles were used. These savings are realized because less energy is wasted flexing fewer tire sidewalls. Second, the lighter overall tire weight allows a truck to be loaded with more freight. The third advantage is that the single wheel encloses less of the brake unit, which allows faster cooling and reduces brake fade.

One of the major disadvantages of the super singles is that they are currently not as widely available as a standard tire. In addition, if a tire should become deflated or be destroyed, there is not another tire attached to the same hub to maintain the dynamic stability of the vehicle, as would be the case with dual wheels. With dual wheels, the remaining tire may be overloaded, but it will typically allow the vehicle to be safely stopped or driven to a repair facility.

Skirted trailers

Main article: trailer skirt

An innovation rapidly growing in popularity is the skirted trailer. The space between the road and the bottom of the trailer frame was traditionally left open, until it was realized that the turbulent air swirling under the trailer is a major source of aerodynamic drag. Three split skirt concepts were verified by the United States Environmental Protection Agency (EPA) to provide fuel savings greater than 5%, and four split skirt concepts had EPA-verified fuel savings between 4% and 5%.

Skirted trailers are often combined with Underrun Protection Systems (underride guards), greatly improving safety for passenger vehicles sharing the road.

Underride guard

Crash test of an underride guard at 30–40 km/h (19–25 mph); the truck platform at head height has been prevented from impacting the windshield

Technically called a Rear Underrun Protection System (RUPS), this is a rigid assembly hanging down from the bottom rear of the trailer, which is intended to provide some protection for passenger cars which collide with the rear of the trailer. Public awareness of this safeguard was increased in the aftermath of the accident that killed actress Jayne Mansfield on 29 June 1967, when the car she was in hit the rear of a tractor-trailer, causing fatal head trauma. After her death, the NHTSA recommended requiring a rear underride guard, also known as a Mansfield bar, an ICC bar, or a DOT (Department of Transportation) bumper, but the trucking industry has been slow to upgrade this safety feature.

The bottom rear of the trailer is near head level for an adult seated in a car, and without the underride guard, the only protection for such an adult's head in a rear-end collision would be the car's windshield. Because of the height mismatch between a passenger car bumper and the much-higher height of the platform of a trailer, the car's protective crush zone becomes irrelevant and air bags are ineffective in protecting the car passengers, if the underride guard is missing or inadequate.

In addition to rear underride guards, truck tractor cabs may be equipped with a Front Underrun Protection System (FUPS) at the front bumper of the truck. The safest tractor-trailers are also equipped with side underride guards, also called Side Underrun Protection System (SUPS). These additional barriers prevent passenger cars from skidding underneath the trailer from the side, such as in an oblique or side collision, or if the trailer jackknifes across the road. In addition to safety benefits, these underride guards may improve fuel mileage by reducing air turbulence under the trailer at highway speeds.

Another benefit of having a sturdy underride guard is that it may be secured to a loading dock with a hook to prevent "trailer creep", a movement of the trailer away from the dock, which opens up a dangerous gap during loading or unloading operations.

Driver's license

View of a truck's interior dashboard

A special driver's license is required to operate various commercial vehicles.

Canada

Regulations vary by province. A license to operate a vehicle with air brakes is required (i.e., normally a Class I, II, or III commercial license with an "A" or "S" endorsement in provinces other than Ontario). In Ontario, a "Z" endorsement is required to drive any vehicle using air brakes; in provinces other than Ontario, the "A" endorsement is for air brake operation only, and an "S" endorsement is for both operation and adjustment of air brakes. Anyone holding a valid Ontario driver's license (i.e., excluding a motorcycle license) with a "Z" endorsement can legally drive any air-brake-equipped truck-trailer combination with a registered- or actual-gross-vehicle-weight (i.e., including towing- and towed-vehicle) up to 11 tonnes, that includes one trailer weighing no more than 4.6 tonnes if the license falls under the following three classes: Class E (school bus—maximum 24-passenger capacity or ambulance), F (regular bus—maximum 24-passenger capacity or ambulance) or G (car, van, or small-truck).

A Class B (any school bus), C (any urban-transit-vehicle or highway-coach), or D (heavy trucks other than tractor-trailers) license enables its holder to drive any truck-trailer combination with a registered- or actual-gross-vehicle-weight (i.e., including towing- and towed-vehicle) greater than 11 tonnes, that includes one trailer weighing no more than 4.6 tonnes. Anyone holding an Ontario Class A license (or its equivalent) can drive any truck-trailer combination with a registered- or actual-gross-vehicle-weight (i.e., including towing- and towed-vehicles) greater than 11 tonnes, that includes one or more trailers weighing more than 4.6 tonnes.

United States

Drivers of semi-trailer trucks generally require a Class A commercial driver's license (CDL) to operate any combination vehicles with a combined Gross Vehicle Weight Rating (or CGVWR) in excess of 26,000 lb (11,800 kg) if the gross vehicle weight rating (GVWR) of the towed vehicle(s) is in excess of 10,000 lb (4,500 kg). Some states (such as North Dakota) provide exemptions for farmers, allowing non-commercial license holders to operate semis within a certain air-mile radius of their reporting location. State exemptions, however, are only applicable in intrastate commerce; stipulations of the Code of Federal Regulations (CFR) may be applied in interstate commerce. Also a person under the age of 21 cannot operate a commercial vehicle outside the state where the commercial license was issued. This restriction may also be mirrored by certain states in their intrastate regulations. A person must be at least 18 in order to be issued a commercial license.

In addition, Endorsements are necessary for certain cargo and vehicle arrangements and types;

• H - Hazardous Materials (HazMat or HM) - necessary if materials require HM placards.
• N - Tankers - the driver is acquainted with the unique handling characteristics of liquids tankers.
• X - Signifies Hazardous Materials and Tanker endorsements, combined.
• T - Doubles & Triples - the licensee may pull more than one trailer.
• P - Buses - Any Vehicle designed to transport 16 or more passengers (including the driver).
• S - School Buses - Any school bus designed to transport 11 or more passengers (including the driver).
• W - Tow Truck

Taiwan

Taiwanese sign prohibiting heavy trailers

The Road Traffic Security Rules (道路交通安全規則) require a combination vehicle driver license (Chinese: 聯結車駕駛執照) to drive a combination vehicle (Chinese: 聯結車). These rules define a combination vehicle as a motor vehicle towing a heavy trailer, i.e., a trailer with a gross weight of more than 750 kilograms (1,653 lb).

Europe

A category CE driving licence is required to drive a tractor-trailer in Europe. Category C (Γ in Greece) is required for vehicles over 7,500 kg (16,500 lb), while category E is for heavy trailers, which in the case of trucks and buses means any trailer over 750 kg (1,650 lb). Vehicles over 3,500 kg (7,700 lb)—which is the maximum limit of B license—but under 7,500 kg can be driven with a C1 license. Buses require a D (Δ in Greece) license. A bus that is registered for no more than 16 passengers, excluding the driver, can be driven with a D1 license.

Australia

Truck drivers in Australia require an endorsed license. These endorsements are gained through training and experience. The minimum age to hold an endorsed license is 18 years, and/or must have held open (full) driver's license for minimum 12 months. The following are the heavy vehicle license classes in Australia:

• LR (Light Rigid) - Class LR covers a rigid vehicle with a GVM (gross vehicle mass) of more than 4.5 tonnes but not more than 8 tonnes. Any towed trailer must not weigh more than 9 tonnes GVM. Also includes vehicles with a GVM up to 8 tonnes which carry more than 12 adults including the driver and vehicles in Class C.
• MR (Medium Rigid) - Class MR covers a rigid vehicle with two axles and a GVM of more than 8 tonnes. Any towed trailer must not weigh more than 9 tonnes GVM. Also includes vehicles in Class LR.
• HR (Heavy Rigid) - Class HR covers a rigid vehicle with three or more axles and a GVM of more than 15 tonnes. Any towed trailer must not weigh more than 9 tonnes GVM. Also includes articulated buses and vehicles in Class MR.
• HC (Heavy Combination) - Class HC covers heavy combination vehicles like a prime mover towing a semi-trailer, or rigid vehicles towing a trailer with a GVM of more than 9 tonnes. Also includes vehicles in Class HR.
• MC (Multi Combination) - Class MC covers multi-combination vehicles like road trains and B-double vehicles. Also includes vehicles in Class HC.

In order to obtain a HC License the driver must have held an MR or HR license for at least 12 months. To upgrade to an MC License the driver must have held a HR or HC license for at least 12 months. From licenses MR and upward there is also a B Condition which may apply to the license if testing in a synchromesh or automatic transmission vehicle. The B Condition may be removed upon the driver proving the ability to drive a constant mesh transmission using the clutch. Constant mesh transmission refers to crash box transmissions, predominantly Road Ranger eighteen-speed transmissions in Australia.

New Zealand

In New Zealand drivers of heavy vehicles require specific licenses, termed as classes. A Class 1 license (car license) will allow the driving of any vehicle with Gross Laden Weight (GLW) or Gross Combination Weight (GCW) of 4,500 kg (9,900 lb) or less. For other types of vehicles the classes are separately licensed as follows:

• Class 2 - Medium Rigid Vehicle: Any rigid vehicle with GLW 18,001 kg (39,685 lb) or less with light trailer of 3,500 kg (7,700 lb) or less, any combination vehicle with GCW 12,001 kg (26,458 lb) or less, any rigid vehicle of any weight with no more than two axles, or any Class 1 vehicle.
• Class 3 - Medium Combination Vehicle: Any combination vehicle of GCW 25,001 kg (55,118 lb) or less, or any Class 2 vehicle.
• Class 4 - Heavy Rigid Vehicle: Any rigid vehicle of any weight, any combination vehicle which consists of a heavy vehicle and a light trailer, or any vehicle of Class 1 or 2 (but not 3).
• Class 5 - Heavy Combination Vehicle: Any combination vehicle of any weight, and any vehicle covered by previous classes.
• Class 6 - Motorcycle.

Further information on the New Zealand licensing system for heavy vehicles can be found at Land Transport New Zealand.

Role in trade

Modern day semi-trailer trucks often operate as a part of a domestic or international transport infrastructure to support containerized cargo shipment.

Various types of rail flat bed train cars are modified to hold the cargo trailer or container with wheels or without. This is called Intermodal or piggyback. The system allows the cargo to switch from highway to railway or vice versa with relative ease by using gantry cranes.

The large trailers pulled by a tractor unit come in many styles, lengths, and shapes. Some common types are: vans, reefers, flatbeds, sidelifts and tankers. These trailers may be refrigerated, heated, ventilated, or pressurized, depending on climate and cargo. Some trailers have movable wheel axles that can be adjusted by moving them on a track underneath the trailer body and securing them in place with large pins. The purpose of this is to help adjust weight distribution over the various axles, to comply with local laws.

Media

See also: Trucking industry in popular culture (United States)

Television

• NBC ran two popular TV series about truck drivers in the 1970s featuring actor Claude Akins in major roles:
  • 1960s TV series Cannonball
  • Movin' On (1974–1976)
  • B. J. and the Bear (1978–1981)
• Knight Rider, an American television show featured a semi-trailer truck called The Semi, operated by the Foundation for Law & Government (F.L.A.G.) as a mobile support facility for KITT. Also, in two episodes KITT faced off against an armored semi called Goliath.
• The Transformers, a 1980s cartoon featuring tractor-trailers as the Autobots' leader Optimus Prime (Convoy in Japanese version), their second-in-command Ultra Magnus, and as the Stunticons' leader Motormaster. Optimus Prime returned in the 2007 film.
• Trick My Truck, a CMT show features trucks getting tricked out (overhauled).
• Ice Road Truckers, a History Channel show charts two months in the lives of six drivers who haul supplies to diamond mines and oil fields over frozen lakes that double as roads.
• 18 Wheels of Justice, featuring Federal Agent Michael Cates (Lucky Vanous) as a crown witness for the mafia who goes undercover, when forced into it, to fight crime.
• Eddie Stobart: Trucks & Trailers, a UK television show showing the trucking company Eddie Stobart and its drivers.

Films

• Duel, Steven Spielberg's 1971 film, features a Peterbilt 281 tanker truck from Australia as the villain
• Maximum Overdrive, Stephen King's 1986 film, featured big rigs as its primary homicidal villains
• Smokey and the Bandit, a 1977 film featuring a number of trucks on the side of the bandit
• Convoy, a 1978 film directed by Sam Peckinpah, starring Kris Kristofferson
• Black Dog, a 1998 film directed by Kevin Hooks, starring Patrick Swayze
• Joy Ride, a 2001 film directed by John Dahl, starring Paul Walker and Steve Zahn
• Big Rig, a 2008 documentary film directed by Doug Pray

Music

• "Convoy", a pop song by C. W. McCall, spurred sales of CB radios with an imaginary trucking story.
• The eighteen-wheeled truck was immortalized in numerous country music songs, such as the Red Sovine titles "Giddyup Go", "Teddy Bear" and "Phantom 309", and Dave Dudley's "Six Days on the Road".
• The thrash metal band, BigRig, was named after these trucks.
• Country song "Eighteen Wheels and a Dozen Roses", made popular in 1987 by singer/songwriter Kathy Mattea.
• "Roll On (Eighteen Wheeler)" by Alabama tells the story of a trucker who calls home to his family every night while out on the road.
• "Papa Loved Mama" by Garth Brooks is about a trucker and his wife.
• "Truck Drivin' Song" by Weird Al Yankovic tells the story of a female trucker, sung by a male with a deep voice.
• "Cold Shoulder" by Garth Brooks is about a trucker stuck on the side of the highway during a blizzard, fantasizing about being home with his wife.

Video games

See also: Category:Truck racing video games

• 18 Wheels of Steel series
• American Truck Simulator
• Big Rigs: Over the Road Racing (2003)
• Euro Truck Simulator
• Euro Truck Simulator 2
• Hard Truck (1998)
• MotorStorm and MotorStorm: Pacific Rift
• Rig 'n' Roll (2009)
• Rigs of Rods

See also

• Air brake (road vehicle)
• Articulated vehicle
• Brake
• Bus
• Containerization
• Dial-a-truck
• Dolly (trailer)
• Drayage
• Dump truck
• Gladhand connector
• Hybrid vehicle
• Jackknifing
• List of trucks
• Loader crane
• Loading dock
• Logging truck
• Long Combination Vehicle
• Oversize/overweight load
• Progressive shifting
• Refrigerator truck ("reefer")
• Road train
• Semi-trailer
• Shunt truck
• Tank truck
• Tractor unit
• Trailer (vehicle)
• Trailer bus
• Train
• Truck
• Truck driver

Notes

References

External links

• TruckNetUK.com, dedicated to Trucking Information in UK and Europe
• Ol' Blue, USA, Safety and Education in and around big trucks in the US as well as an AskTheLaw section also in print and on radio where questions can be directed to commercial law enforcement

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

• 1. バレット食道のためのラジオ波焼灼術 radiofrequency ablation for barretts esophagus
• 2. 小児における嗄声：評価 hoarseness in children evaluation
• 3. 糖尿病を有する小児の自己マネージメントに関する教育 self management education for the child with diabetes mellitus
• 4. 成人における嗄声 hoarseness in adults
• 5. ST上昇型心筋梗塞の急性期マネージメントの概要 overview of the acute management of st elevation myocardial infarction

English Journal

• Motor vehicle-assisted ligature strangulation causing complete decapitation: an autopsy report.

• Samberkar PN.SourceForensic Unit, Department of Pathology, Faculty of Medicine, University of Malaya, Kuala Lumpur, Malaysia. samberkarprashant@hotmail.com
• The American journal of forensic medicine and pathology.Am J Forensic Med Pathol.2012 Mar;33(1):86-7. doi: 10.1097/PAF.0b013e3182186d72.
• The victim, a 63-year-old prosperous businessman from Labasa, of the Northern Island (Vanua Levu) of Fiji Islands, was found completely decapitated in the early hours of morning in 2004. Initial police investigation did not reveal any history of any medical or family calamity. Further inquiry by the
• PMID 21455053

• Articulation at shoulder level--a pilot experimental study on car seat comfort.

• Coelho DA, Dahlman S.SourceHuman Technology Group, Department of Electromechanical Engineering, University of Beira Interior, 6201-001 Covilhã, Portugal. denis@ubi.pt
• Applied ergonomics.Appl Ergon.2012 Jan;43(1):27-37. doi: 10.1016/j.apergo.2011.03.003. Epub 2011 Apr 11.
• This article reports on a pilot experimental study aimed at a first evaluation of the introduction of an articulation in the upper part of the seat backrest. The idea of introducing this articulation sprang from prevention of whiplash injuries and this study tentatively assesses its potential for im
• PMID 21482419

• Noise exposure and convertible cars.

• Michael P, Opie N, Smith M.SourceWorcestershire Royal Hospital, Charles Hastings Way, Worcester, United Kingdom. phil.michael@doctors.org.uk
• Otolaryngology--head and neck surgery : official journal of American Academy of Otolaryngology-Head and Neck Surgery.Otolaryngol Head Neck Surg.2010 Aug;143(2):219-22. doi: 10.1016/j.otohns.2010.03.009.
• OBJECTIVE: To investigate whether drivers of convertible cars are exposed to excessive noise levels.STUDY DESIGN: Prospective.SETTING: Data were collected along a main United Kingdom highway.SUBJECTS AND METHODS: Seven cars were included within the study, encompassing a range in cost, power, and com
• PMID 20647123

Related Links

• articulated lorryの意味 - 英和辞書 - 英語辞書 - goo辞書

articulated lorryとは。意味や和訳。((英略式))トレーラートラック（((米略式))semi）. - goo英和辞書は14万項目以上を収録し、発音、音声、慣用句、例文が分かる英和辞書です。

• articulated lorry - definition of articulated lorry by The Free ...

articulated lorry semitrailer Thesaurus Antonyms Related Words Synonyms Legend: Noun 1. articulated lorry - a truck consisting of a tractor and trailer together tractor trailer, trailer truck, trucking rig, rig, semi semitrailer, semi - a ...

Related Pictures

---

★リンクテーブル★

関連記事	「articulate」

「articulate」

　　[★]

• adj.
• vt.,vi.

• 音節に分ける、(音節・各語を)はっきりと発音する。(思想を)表現する。関節でつなぐ/つながる(with)。組織化する、統合する。