alkali metal

• アルカリ金属

関

alkaline metal

WordNet

1. cover with metal
2. a mixture of soluble salts found in arid soils and some bodies of water; detrimental to agriculture

PrepTutorEJDIC

1. 〈C〉(個々の)『金属』;〈U〉(材料としての)金属 / 〈U〉合金(真ちゅう,真銅など) / 〈U〉気性,気質 / 〈U〉《英》(舗装用・鉄道用の)砕石 / …‘に'金属をかぶせる / 《英》〈道路〉‘に'砕石を敷く
2. アルカリ,塩基
3. meetの過去・過去分詞

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2014/07/27 00:58:38」(JST)

wiki en

[Wiki en表示]

Alkali metals
noble gases ←    → alkaline earth metals
IUPAC group number 1 Name by element lithium group Trivial name alkali metals CAS group number (US) IA old IUPAC number (European) IA
↓ Period
2	Lithium (Li) 3
3	Sodium (Na) 11
4	Potassium (K) 19
5	Rubidium (Rb) 37
6	Caesium (Cs) 55
7	Francium (Fr) 87
Legend primordial element by radioactive decay Atomic number color: black=solid

The alkali metals are a group in the periodic table consisting of the chemical elements lithium (Li), sodium (Na), potassium (K), rubidium (Rb), caesium (Cs), and francium (Fr). This group lies in the s-block of the periodic table as all alkali metals have their outermost electron in an s-orbital. The alkali metals provide the best example of group trends in properties in the periodic table, with elements exhibiting well-characterized homologous behaviour.

The alkali metals have very similar properties: they are all shiny, soft, highly reactive metals at standard temperature and pressure and readily lose their outermost electron to form cations with charge +1. They can all be cut easily with a knife due to their softness, exposing a shiny surface that tarnishes rapidly in air due to oxidation by atmospheric moisture and oxygen. Because of their high reactivity, they must be stored under oil to prevent reaction with air, and are found naturally only in salts and never as the free element. In the modern IUPAC nomenclature, the alkali metals comprise the group 1 elements, excluding hydrogen (H), which is nominally a group 1 element but not normally considered to be an alkali metal as it rarely exhibits behaviour comparable to that of the alkali metals. All the alkali metals react with water, with the heavier alkali metals reacting more vigorously than the lighter ones.

All the discovered alkali metals occur in nature: in order of abundance, sodium is the most abundant, followed by potassium, lithium, rubidium, caesium, and finally francium, which is very rare due to its extremely high radioactivity and thus occurs only in traces due to its presence in natural decay chains. Experiments have been conducted to attempt the synthesis of ununennium (Uue), which is likely to be the next member of the group, but they have all met with failure. However, ununennium may not be an alkali metal due to relativistic effects, which are predicted to have a large influence on the chemical properties of superheavy elements; even if it does turn out to be an alkali metal, it is predicted to have some differences in physical and chemical properties from its lighter homologues.

Most alkali metals have many different applications. Two of the most well-known applications of the pure elements are rubidium and caesium atomic clocks, of which caesium atomic clocks are the most accurate and precise representation of time. A common application of the compounds of sodium is the sodium-vapour lamp, which emits very efficient light. Table salt, or sodium chloride, has been used since antiquity. Sodium and potassium are also essential elements, having major biological roles as electrolytes, and although the other alkali metals are not essential, they also have various effects on the body, both beneficial and harmful.

Physical properties

The physical and chemical properties of the alkali metals can be readily explained by their having an ns¹ valence electron configuration, which results in weak metallic bonding. Hence, all the alkali metals are soft and have low densities, melting and boiling points, as well as heats of sublimation, vaporization, and dissociation. They all crystallize in the body-centered cubic crystal structure, and have distinctive flame colours because their outer s electron is very easily excited. The ns¹ configuration also results in the alkali metals having very large atomic and ionic radii, as well as high thermal and electrical conductivity.

The stable alkali metals are all silver-coloured metals except for caesium, which has a golden tint: it is one of only three metals that are clearly coloured (the other two being copper and gold). They all crystallize in the body-centered cubic crystal structure, and have distinctive flame colours because their outer s electron is very easily excited.

The table below is a summary of the key physical and atomic properties of the alkali metals. Data marked with question marks are either uncertain or are estimations partially based on periodic trends rather than observations. Almost nothing is known about francium due to its extreme radioactivity, and hence only a limited amount of information may be given for it.

Alkali metal	Standard atomic weight (u)	Melting point	Boiling point	Density (g/cm3)	Electronegativity (Pauling)	First ionisation energy (kJ·mol−1)	Atomic radius (pm)	Flame test colour Principal emission/absorption wavelength
Lithium	6.94(1)	453.69 K, 180.54 °C, 356.97 °F	1615 K, 1342 °C, 2448 °F	0.534	0.98	520.2	152	Crimson 670.8 nm
Sodium	22.98976928(2)	370.87 K, 97.72 °C, 207.9 °F	1156 K, 883 °C, 1621 °F	0.968	0.93	495.8	186	Yellow 589.2 nm
Potassium	39.0983(1)	336.53 K, 63.38 °C, 146.08 °F	1032 K, 759 °C, 1398 °F	0.89	0.82	418.8	227	Violet 766.5 nm
Rubidium	85.4678(3)	312.467 K, 39.31 °C, 102.76 °F	961 K, 688 °C, 1270 °F	1.532	0.82	403.0	248	Red-violet 780.0 nm
Caesium	132.9054519(2)	301.59 K, 28.44 °C, 83.19 °F	944 K, 671 °C, 1240 °F	1.93	0.79	375.7	265	Blue 455.5 nm
Francium	[223]	? 300 K, ? 27 °C, ? 80 °F	? 950 K, ? 677 °C, ? 1250 °F	? 1.87	? 0.7	380	?	?

Chemical properties

Series of alkali metals, stored in mineral oil to prevent oxidation. ("Natrium" is the German name for sodium.)

Like other groups, the known members of this family show patterns in electronic configuration, especially the outermost shells, resulting in trends in chemical behaviour. Their chemistry is dominated by the loss of their lone valence electron to form the +1 oxidation state, due to the ease of ionizing this electron and the very high second ionization energy. Their lustre tarnishes rapidly in air due to oxidation.

Z	Element	No. of electrons/shell	Electron configuration
3	lithium	2, 1	[He] 2s1
11	sodium	2, 8, 1	[Ne] 3s1
19	potassium	2, 8, 8, 1	[Ar] 4s1
37	rubidium	2, 8, 18, 8, 1	[Kr] 5s1
55	caesium	2, 8, 18, 18, 8, 1	[Xe] 6s1
87	francium	2, 8, 18, 32, 18, 8, 1	[Rn] 7s1

Most of the chemistry has been observed only for the first five members of the group. The chemistry of francium is not well established due to its extreme radioactivity; thus, the presentation of its properties here is limited.

Play media

Caesium reacts explosively with water even at low temperatures

All the alkali metals are highly reactive and are never found in elemental forms in nature. Because of this, they are usually stored in mineral oil or kerosene (paraffin oil). They react aggressively with the halogens to form the alkali metal halides, which are white ionic crystalline compounds that are all soluble in water except lithium fluoride (LiF). The alkali metals also react with water to form strongly alkaline hydroxides and thus should be handled with great care. The heavier alkali metals react more vigorously than the lighter ones; for example, when dropped into water, caesium produces a larger explosion than potassium. The alkali metals have the lowest first ionisation energies in their respective periods of the periodic table because of their low effective nuclear charge and the ability to attain a noble gas configuration by losing just one electron. The second ionisation energy of all of the alkali metals is very high as it is in a full shell that is also closer to the nucleus; thus, they almost always lose a single electron, forming cations. The alkalides are an exception: they are unstable compounds which contain alkali metals in a −1 oxidation state, which is very unusual as before the discovery of the alkalides, the alkali metals were not expected to be able to form anions and were thought to be able to appear in salts only as cations. The alkalide anions have filled s-subshells, which gives them more stability and allows them to exist. All the stable alkali metals except lithium are known to be able to form alkalides, and the alkalides have much theoretical interest due to their unusual stoichiometry and low ionisation potentials. Alkalides are chemically similar to the electrides, which are salts with trapped electrons acting as anions. A particularly striking example of an alkalide is "inverse sodium hydride", H⁺Na⁻, as opposed to the usual sodium hydride, Na⁺H⁻: it is unstable in isolation, due to its high energy resulting from the displacement of two electrons from hydrogen to sodium, although several derivatives are predicted to be metastable or stable.

Lithium

The chemistry of lithium shows several differences from that of the rest of the group as the small Li⁺ cation polarises anions and gives its compounds a more covalent character. Lithium and magnesium have a diagonal relationship due to their similar atomic radii, so that they show some similarities. For example, lithium forms a stable nitride, a property common among all the alkaline earth metals (magnesium's group) but unique among the alkali metals. In addition, among their respective groups, only lithium and magnesium form covalent organometallic compounds (e.g. LiMe and MgMe₂).

Lithium fluoride is the only alkali metal halide that is not soluble in water, and lithium hydroxide is the only alkali metal hydroxide that is not deliquescent. Conversely, lithium perchlorate and other lithium salts with large anions that cannot be polarized are much more stable than the analogous compounds of the other alkali metals, probably because Li⁺ has a high solvation energy. This effect also means that most simple lithium salts are commonly encountered in hydrated form, because the anhydrous forms are extremely hygroscopic: this allows salts like lithium chloride and lithium bromide to be used in dehumidifiers and air-conditioners.

Francium

Francium is also predicted to show some differences due to its high atomic weight, causing its electrons to travel at considerable fractions of the speed of light and thus making relativistic effects more prominent. In contrast to the trend of decreasing electronegativities and ionisation energies of the alkali metals, francium's electronegativity and ionisation energy are predicted to be higher than caesium's due to the relativistic stabilisation of the 7s electrons; also, its atomic radius is expected to be abnormally low.

Nuclear properties

Primordial isotopes of the alkali metals

Z	Alkali metal	Stable	Decays	unstable: italics odd-odd isotopes coloured pink
3	lithium	2	—	7Li	6Li
11	sodium	1	—	23Na
19	potassium	2	1	39K	41K	40K
37	rubidium	1	1	85Rb	87Rb
55	caesium	1	—	133Cs
87	francium	—	—	No primordial isotopes (223Fr is a trace radioisotope)

All the alkali metals have odd atomic numbers; hence, their isotopes must be either odd-odd (both proton and neutron number are odd) or odd-even (proton number is odd, but neutron number is even). Odd-odd nuclei have even mass numbers, while odd-even nuclei have odd mass numbers. Odd-odd primordial nuclides are rare because most odd-odd nuclei are highly unstable with respect to beta decay, because the decay products are even-even, and are therefore more strongly bound, due to nuclear pairing effects.

Due to the great rarity of odd-odd nuclei, almost all the primordial isotopes of the alkali metals are odd-even (the exceptions being the light stable isotope lithium-6 and the long-lived radioisotope potassium-40). For a given odd mass number, there can be only a single beta-stable nuclide, since there is not a difference in binding energy between even-odd and odd-even comparable to that between even-even and odd-odd, leaving other nuclides of the same mass number (isobars) free to beta decay toward the lowest-mass nuclide. An effect of the instability of an odd number of either type of nucleons is that odd-numbered elements, such as the alkali metals, tend to have fewer stable isotopes than even-numbered elements. Of the 26 monoisotopic elements that have only a single stable isotope, all but one have an odd atomic number and all but one also have an even number of neutrons. Beryllium is the single exception to both rules, due to its low atomic number.

All of the alkali metals except lithium and caesium have at least one naturally occurring radioisotope: sodium-22 and sodium-24 are trace radioisotopes produced cosmogenically, potassium-40 and rubidium-87 have very long half-lives and thus occur naturally, and all isotopes of francium are radioactive. Caesium was also thought to be radioactive in the early 20th century, although it has no naturally occurring radioisotopes. (Francium had not been discovered yet at that time.) The natural radioisotope of potassium, potassium-40, makes up about 0.012% of natural potassium, and thus natural potassium is weakly radioactive. This natural radioactivity became a basis for a mistaken claim of the discovery for element 87 (the next alkali metal after caesium) in 1925.

Caesium-137, with a half-life of 30.17 years, is one of the two principal medium-lived fission products, along with strontium-90, which are responsible for most of the radioactivity of spent nuclear fuel after several years of cooling, up to several hundred years after use. It constitutes most of the radioactivity still left from the Chernobyl accident. ¹³⁷Cs undergoes high-energy beta decay and eventually becomes stable barium-137. It is a strong emitter of gamma radiation. ¹³⁷Cs has a very low rate of neutron capture and cannot be feasibly disposed of in this way, but must be allowed to decay. ¹³⁷Cs has been used as a tracer in hydrologic studies, analogous to the use of tritium. Small amounts of caesium-134 and caesium-137 were released into the environment during nearly all nuclear weapon tests and some nuclear accidents, most notably the Goiânia accident and the Chernobyl disaster. As of 2005, caesium-137 is the principal source of radiation in the zone of alienation around the Chernobyl nuclear power plant.

Periodic trends

See also: Periodic trends

The alkali metals are more similar to each other than the elements in any other group are to each other. For instance, when moving down the table, all known alkali metals show increasing atomic radius, decreasing electronegativity, increasing reactivity, and decreasing melting and boiling points as well as heats of fusion and vaporization. In general, their densities increase when moving down the table, with the exception that potassium is less dense than sodium. One of the very few properties of the alkali metals that does not display a very smooth trend is their reduction potentials: lithium's value is anomalous, being more negative than the others. This is because the Li⁺ ion has a very high hydration energy in the gas phase: though the lithium ion disrupts the structure of water significantly, causing a higher change in entropy, this high hydration energy is enough to make the reduction potentials indicate it as being the most electropositive alkali metal, despite the difficulty of ionizing it in the gas phase.

Atomic and ionic radii

Main article: Atomic radius

Effective nuclear charge on an atomic electron

Atomic and ionic radii of the alkali metals

Alkali metal	Atomic radius (pm)	Ionic radius (pm)
Lithium	152	68
Sodium	186	98
Potassium	227	133
Rubidium	248	148
Caesium	265	167

The atomic radii of the alkali metals increase going down the group. Because of the shielding effect, when an atom has more than one electron shell, each electron feels electric repulsion from the other electrons as well as electric attraction from the nucleus. In the alkali metals, the outermost electron only feels a net charge of +1, as some of the nuclear charge (which is equal to the atomic number) is cancelled by the inner electrons; the number of inner electrons of an alkali metal is always one less than the nuclear charge. Therefore, the only factor which affects the atomic radius of the alkali metals is the number of electron shells. Since this number increases down the group, the atomic radius must also increase down the group.

The ionic radii of the alkali metals are much smaller than their atomic radii. This is because the outermost electron of the alkali metals is in a different electron shell than the inner electrons, and thus when it is removed the resulting atom has one fewer electron shell and is smaller. Additionally, the effective nuclear charge has increased, and thus the electrons are attracted more strongly towards the nucleus and the ionic radius decreases.

First ionisation energy

Main article: Ionisation energy

Periodic trend for ionisation energy: each period begins at a minimum for the alkali metals, and ends at a maximum for the noble gases.

First ionisation energies of the alkali metals

Alkali metal	First ionisation energy (kJ/mol)
Lithium	520.2
Sodium	495.8
Potassium	418.8
Rubidium	403.0
Caesium	375.7
Francium	380

The first ionisation energy of an element or molecule is the energy required to move the most loosely held electron from one mole of gaseous atoms of the element or molecules to form one mole of gaseous ions with electric charge +1. The factors affecting the first ionisation energy are the nuclear charge, the amount of shielding by the inner electrons and the distance from the most loosely held electron from the nucleus, which is always an outer electron in main group elements. The first two factors change the effective nuclear charge the most loosely held electron feels. Since the outermost electron of alkali metals always feels the same effective nuclear charge (+1), the only factor which affects the first ionisation energy is the distance from the outermost electron to the nucleus. Since this distance increases down the group, the outermost electron feels less attraction from the nucleus and thus the first ionisation energy decreases. (This trend is broken in francium due to the relativistic stabilization and contraction of the 7s orbital, bringing francium's valence electron closer to the nucleus than would be expected from non-relativistic calculations. This makes francium's outermost electron feel more attraction from the nucleus, increasing its first ionisation energy slightly beyond that of caesium.)

The second ionisation energy of the alkali metals is much higher than the first as the second-most loosely held electron is part of a fully filled electron shell and is thus difficult to remove.

Reactivity

Main article: Reactivity (chemistry)

The reactivities of the alkali metals increase going down the group. This is the result of a combination of two factors: the first ionisation energies and atomisation energies of the alkali metals. Because the first ionisation energy of the alkali metals decreases down the group, it is easier for the outermost electron to be removed from the atom and participate in chemical reactions, thus increasing reactivity down the group. The atomisation energy measures the strength of the metallic bond of an element, which falls down the group as the atoms increase in radius and thus the metallic bond must increase in length, making the delocalised electrons further away from the attraction of the nuclei of the heavier alkali metals. Adding the atomisation and first ionisation energies gives a quantity closely related to (but not equal to) the activation energy of the reaction of an alkali metal with another substance. This quantity decreases going down the group, and so does the activation energy; thus, chemical reactions can occur faster and the reactivity increases down the group.

Electronegativity

Main article: Electronegativity

The variation of Pauling electronegativity (y-axis) as one descends the main groups of the periodic table from the second to the sixth period

Electronegativities of the alkali metals

Alkali metal	Electronegativity
Lithium	0.98
Sodium	0.93
Potassium	0.82
Rubidium	0.82
Caesium	0.79
Francium	? 0.7

Electronegativity is a chemical property that describes the tendency of an atom or a functional group to attract electrons (or electron density) towards itself. If the bond between sodium and chlorine in sodium chloride were covalent, the pair of shared electrons would be attracted to the chlorine because the effective nuclear charge on the outer electrons is +7 in chlorine but is only +1 in sodium. The electron pair is attracted so close to the chlorine atom that they are practically transferred to the chlorine atom (an ionic bond). However, if the sodium atom was replaced by a lithium atom, the electrons will not be attracted as close to the chlorine atom as before because the lithium atom is smaller, making the electron pair more strongly attracted to the closer effective nuclear charge from lithium. Hence, the larger alkali metal atoms (further down the group) will be less electronegative as the bonding pair is less strongly attracted towards them.

Because of the higher electronegativity of lithium, some of its compounds have a more covalent character. For example, lithium iodide (LiI) will dissolve in organic solvents, a property of most covalent compounds. Lithium fluoride (LiF) is the only alkali halide that is not soluble in water, and lithium hydroxide (LiOH) is the only alkali metal hydroxide that is not deliquescent.

Melting and boiling points

Main articles: Melting point and Boiling point

Melting and boiling points of the alkali metals

Alkali metal	Melting point	Boiling point
Lithium	454 !453.69 K (180.54 °C)	1615 !1615 K (1342 °C)
Sodium	371 !370.87 K (97.72 °C)	1156 !1156 K (883 °C)
Potassium	337 !336.53 K (63.38 °C)	1032 !1032 K (759 °C)
Rubidium	312 !312.46 K (39.31 °C)	0961 !961 K (688 °C)
Caesium	302 !301.59 K (28.44 °C)	0944 !944 K (671 °C)
Francium	300 !? 300 K (? 27 °C)	0950 !? 950 K (? 677 °C)

The melting point of a substance is the point where it changes state from solid to liquid while the boiling point of a substance (in liquid state) is the point where the vapor pressure of the liquid equals the environmental pressure surrounding the liquid and all the liquid changes state to gas. As a metal is heated to its melting point, the metallic bonds keeping the atoms in place weaken so that the atoms can move around, and the metallic bonds eventually break completely at the metal's boiling point. Therefore, the falling melting and boiling points of the alkali metals indicate that the strength of the metallic bonds of the alkali metals decreases down the group. This is because metal atoms are held together by the electromagnetic attraction from the positive ions to the delocalised electrons. As the atoms increase in size going down the group (because their atomic radius increases), the nuclei of the ions move further away from the delocalised electrons and hence the metallic bond becomes weaker so that the metal can more easily melt and boil, thus lowering the melting and boiling points. (The increased nuclear charge is not a relevant factor due to the shielding effect.)

Density

Main article: Density

Densities of the alkali metals

Alkali metal	Density (g/cm3)
Lithium	0.534
Sodium	0.968
Potassium	0.89
Rubidium	1.532
Caesium	1.93
Francium	1.87 !? 1.87

The alkali metals all have the same crystal structure (body-centred cubic) and thus the only relevant factors are the number of atoms that can fit into a certain volume and the mass of one of the atoms, since density is defined as mass per unit volume. The first factor depends on the volume of the atom and thus the atomic radius, which increases going down the group; thus, the volume of an alkali metal atom increases going down the group. The mass of an alkali metal atom also increases going down the group. Thus, the trend for the densities of the alkali metals depends on their atomic weights and atomic radii; if figures for these two factors are known, the ratios between the densities of the alkali metals can then be calculated. The resultant trend is that the densities of the alkali metals increase down the table, with an exception at potassium. Due to having the lowest atomic weight of all the elements in their period and having the largest atomic radius for their periods, the alkali metals are the least dense metals in the periodic table. Lithium, sodium, and potassium are the only three metals in the periodic table that are less dense than water: in fact, lithium is the least dense known solid at room temperature.

Compounds

Hydroxides

External video

Reactions of the alkali metals with water, conducted by The Open University

A reaction of 3 pounds (≈ 1.4 kg) of sodium with water

All the alkali metals react vigorously or explosively with cold water, producing an aqueous solution of the strongly basic alkali metal hydroxide and releasing hydrogen gas. This reaction becomes more vigorous going down the group: lithium reacts steadily with effervescence, but sodium and potassium can ignite and rubidium and caesium sink in water and generate hydrogen gas so rapidly that shock waves form in the water that may shatter glass containers. When an alkali metal is dropped into water, it produces an explosion, of which there are two separate stages. The metal reacts with the water first, breaking the hydrogen bonds in the water and producing hydrogen gas; this takes place faster for the more reactive heavier alkali metals. Second, the heat generated by the first part of the reaction often ignites the hydrogen gas, causing it to burn explosively into the surrounding air. This secondary hydrogen gas explosion produces the visible flame above the bowl of water, lake or other body of water, not the initial reaction of the metal with water (which tends to happen mostly under water). The alkali metal hydroxides are the most basic known hydroxides.

Compounds with the group 14 elements

Side (left) and top (right) views of the graphite intercalation compound KC₈

Lithium and sodium react with carbon to form acetylides, Li₂C₂ and Na₂C₂, which can also be obtained by reaction of the metal with acetylene. Potassium, rubidium, and caesium react with graphite; their atoms are intercalated between the hexagonal graphite layers, forming graphite intercalation compounds of formulae MC₆₀ (dark grey, almost black), MC₄₈ (dark grey, almost black), MC₃₆ (blue), MC₂₄ (steel blue), and MC₈ (bronze) (M = K, Rb, or Cs). These compounds are over 200 times more electrically conductive than pure graphite, suggesting that the valence electron of the alkali metal is transferred to the graphite layers (e.g. M+
C−
8). Upon heating of KC₈, the elimination of potassium atoms results in the conversion in sequence to KC₂₄, KC₃₆, KC₄₈ and finally KC₆₀. KC₈ is a very strong reducing agent and is pyrophoric and explodes on contact with water. While the large alkali metals (K, Rb, and Cs) initially form MC₈, the smaller ones initially form MC₆.

When the alkali metals react with the heavier elements in the carbon group, ionic substances with cage-like structures are formed, such as the silicide M₄Si₄ (M = K, Rb, or Cs), which contains M⁺ and tetrahedral Si4−
4 ions. The chemistry of alkali metal germanides, involving the germanide ion Ge⁴⁻ and other cluster (Zintl) ions such as Ge2−
4, Ge4−
9, Ge2−
9, and [(Ge₉)₂]⁶⁻, is largely analogous to that of the corresponding silicides. Alkali metal stannides are mostly ionic, sometimes with the stannide ion (Sn⁴⁻), and sometimes with more complex Zintl ions such as Sn4−
9, which appears in tetrapotassium nonastannide (K₄Sn₉). The monatomic plumbide ion (Pb⁴⁻) is unknown, and indeed its formation is predicted to be energetically unfavourable; alkali metal plumbides have complex Zintl ions, such as Pb4−
9.

Pnictides

Unit cell ball-and-stick model of lithium nitride On the basis of size a tetrahedral structure would be expected, but that would be geometrically impossible: thus lithium nitride takes on this unique crystal structure.

Lithium, the lightest of the alkali metals, is the only alkali metal which reacts with nitrogen at standard conditions, and its nitride is the only stable alkali metal nitride. Nitrogen is an unreactive gas because breaking the strong triple bond in the dinitrogen molecule (N₂) requires a lot of energy. The formation of an alkali metal nitride would consume the ionisation energy of the alkali metal (forming M⁺ ions), the energy required to break the triple bond in N₂ and the formation of N³⁻ ions, and all the energy released from the formation of an alkali metal nitride is from the lattice energy of the alkali metal nitride. The lattice energy is maximised with small, highly charged ions; the alkali metals do not form highly charged ions, only forming ions with a charge of +1, so only lithium, the smallest alkali metal, can release enough lattice energy to make the reaction with nitrogen exothermic, forming lithium nitride. The reactions of the other alkali metals with nitrogen would not release enough lattice energy and would thus be endothermic, so they do not form nitrides at standard conditions. (Sodium nitride (Na₃N) and potassium nitride (K₃N), while existing, are extremely unstable, being prone to decomposing back into their constituent elements, and cannot be produced by reacting the elements with each other at standard conditions.)

All the alkali metals react readily with phosphorus and arsenic to form phosphides and arsenides with the formula M₃Pn (where M represents an alkali metal and Pn represents a pnictogen). This is due to the greater size of the P³⁻ and As³⁻ ions, so that less lattice energy needs to be released for the salts to form. These are not the only phosphides and arsenides of the alkali metals: for example, potassium has nine different known phosphides, with formulae K₃P, K₄P₃, K₅P₄, KP, K₄P₆, K₃P₇, K₃P₁₁, KP_10.3, and KP₁₅. While most metals form arsenides, only the alkali and alkaline earth metals form mostly ionic arsenides. The structure of Na₃As is complex with unusually short Na–Na distances of 328–330 pm which are shorter than in sodium metal, and this indicates that even with these electropositive metals the bonding cannot be straightforwardly ionic. Other alkali metal arsenides not conforming to the formula M₃As are known, such as LiAs, which has a metallic lustre and electrical conductivity indicating the presence of some metallic bonding. The antimonides are unstable and reactive as the Sb³⁻ ion is a strong reducing agent; reaction of them with acids form the toxic and unstable gas stibine (SbH₃). Bismuthides are not even wholly ionic; they are intermetallic compounds containing partially metallic and partially ionic bonds.

Chalcogenides

See also: Alkali metal oxide

Rb

9O

2 cluster, composed of two regular octahedra connected to each other by one face

Cs

11O

3 cluster, composed of three regular octahedra where each octahedron is connected to both of the others by one face each. All three octahedra have one edge in common.

All the alkali metals react vigorously with oxygen at standard conditions. They form various types of oxides, such as simple oxides (containing the O²⁻ ion), peroxides (containing the O2−
2 ion, where there is a single bond between the two oxygen atoms), superoxides (containing the O−
2 ion), and many others. Lithium burns in air to form lithium oxide, but sodium reacts with oxygen to form a mixture of sodium oxide and sodium peroxide. Potassium forms a mixture of potassium peroxide and potassium superoxide, while rubidium and caesium form the superoxide exclusively. Their reactivity increases going down the group: while lithium, sodium and potassium merely burn in air, rubidium and caesium are pyrophoric (spontaneously catch fire in air).

The smaller alkali metals tend to polarise the more complex anions (the peroxide and superoxide) due to their small size. This attracts the electrons in the more complex anions towards one of its constituent oxygen atoms, forming an oxide ion and an oxygen atom. This causes lithium to form the oxide exclusively on reaction with oxygen at room temperature. This effect becomes drastically weaker for the larger sodium and potassium, allowing them to form the less stable peroxides. Rubidium and caesium, at the bottom of the group, are so large that even the least stable superoxides can form. Because the superoxide releases the most energy when formed, the superoxide is preferentially formed for the larger alkali metals where the more complex anions are not polarised. (The oxides and peroxides for these alkali metals do exist, but do not form upon direct reaction of the metal with oxygen at standard conditions.) In addition, the small size of the Li⁺ and O²⁻ ions contributes to their forming a stable ionic lattice structure. Under controlled conditions, however, all the alkali metals, with the exception of francium, are known to form their oxides, peroxides, and superoxides. The alkali metal peroxides and superoxides are powerful oxidizing agents. Sodium peroxide and potassium superoxide react with carbon dioxide to form the alkali metal carbonate and oxygen gas, which allows them to be used in submarine air purifiers; the presence of water vapour, naturally present in breath, makes the removal of carbon dioxide by potassium superoxide even more efficient. All the stable alkali metals except lithium can form red ozonides (MO₃) through low-temperature reaction of the powdered anhydrous hydroxide with ozone: the ozonides may be then extracted using liquid ammonia.

Rubidium and caesium can form even more complicated oxides than the superoxides. Rubidium can form Rb₆O and Rb₉O₂ upon oxidation in air, while caesium forms an immense variety of oxides, such as the ozonide CsO₃ and several brightly coloured suboxides, such as Cs
7O, Cs
4O, Cs
11O
3, Cs
3O (dark-green), CsO, Cs
3O
2, as well as Cs
7O
2. The latter may be heated under vacuum to generate Cs
2O.

The alkali metals can also react analogously with the heavier chalcogens (sulfur, selenium, tellurium, and polonium), and all the alkali metal chalcogenides are known (with the exception of francium's). Reaction with an excess of the chalcogen can similarly result in lower chalcogenides, with chalcogen ions containing chains of the chalcogen atoms in question. For example, sodium can react with sulfur to form the sulfide (Na₂S) and various polysulfides with the formula Na₂S_x (x from 2 to 6), containing the S2−
x ions. Due to the basicity of the Se²⁻ and Te²⁻ ions, the alkali metal selenides and tellurides are alkaline in solution; when reacted directly with selenium and tellurium, alkali metal polyselenides and polytellurides are formed along with the selenides and tellurides with the Se2−
x and Te2−
x ions. The alkali metal polonides are all ionic compounds containing the Po²⁻ ion; they are very chemically stable and can be produced by direct reaction of the elements at around 300–400 °C.

Hydrides and halides

Main article: Alkali metal halide

The alkali metals are among the most electropositive elements on the periodic table and thus tend to bond ionically to the most electronegative elements on the periodic table, the halogens, forming salts known as the alkali metal halides. The reaction is very vigorous and can sometimes result in explosions. This includes sodium chloride, otherwise known as common salt. The reactivity becomes higher from lithium to caesium and drops from fluorine to iodine. All of the alkali metal halides have the formula MX where M is an alkali metal and X is a halogen. They are all white ionic crystalline solids. All the alkali metal halides are soluble in water except for lithium fluoride (LiF), which is insoluble in water due to its very high lattice enthalpy. The high lattice enthalpy of lithium fluoride is due to the small sizes of the Li⁺ and F⁻ ions, causing the electrostatic interactions between them to be strong: a similar effect occurs for magnesium fluoride, which lithium has a diagonal relationship with. The alkali metals also react similarly with hydrogen to form ionic alkali metal hydrides.

Coordination complexes

18-crown-6 coordinating a potassium ion

Structure of 2.2.2-Cryptand encapsulating a potassium cation (purple). At crystalline state, obtained with an X-ray diffraction.

Alkali metal cations do not usually form coordination complexes with simple Lewis bases due to their low charge of just +1 and their relatively large size; thus the Li⁺ ion forms most complexes and the heavier alkali metal ions form less and less. In aqueous solution, the alkali metal ions exist as octahedral hexahydrate complexes ([M(H₂O)₆)]⁺), with the exception of the lithium ion, which due to its small size forms tetrahedral tetrahydrate complexes ([Li(H₂O)₄)]⁺); the alkali metals form these complexes because their ions are attracted by electrostatic forces of attraction to the polar water molecules. Because of this, anhydrous salts containing alkali metal cations are often used as desiccants. Alkali metals also readily form complexes with crown ethers (e.g. 12-crown-4 for Li⁺, 15-crown-5 for Na⁺, and 18-crown-6 for K⁺) and cryptands due to electrostatic attraction.

Ammonia solutions

Unlike most metals, the alkali metals dissolve slowly in liquid ammonia, forming hydrogen gas and the alkali metal amide (MNH₂, where M represents an alkali metal): this was first noted by Humphry Davy in 1809 and rediscovered by W. Weyl in 1864. The process may be speeded up by a catalyst. The amide salt is quite insoluble and readily precipitates out of solution, leaving intensely coloured ammonia solutions of the alkali metals. In 1907, Charles Krause identified the colour as being due to the presence of solvated electrons, which contribute to the high electrical conductivity of these solutions. At low concentrations (below 3 M), the solution is dark blue and has ten times the conductivity of aqueous sodium chloride; at higher concentrations (above 3 M), the solution is copper-coloured and has approximately the conductivity of liquid metals like mercury. In addition to the alkali metal amide salt and solvated electrons, such ammonia solutions also contain the alkali metal cation (M⁺), the neutral alkali metal atom (M), diatomic alkali metal molecules (M₂) and alkali metal anions (M⁻). These are unstable and eventually become the more thermodynamically stable alkali metal amide and hydrogen gas. Solvated electrons are powerful reducing agents and are often used in chemical synthesis.

Organometallic

Structure of the methyllithium tetramer, (CH₃Li)₄

Being the smallest alkali metal, lithium forms the widest variety of and most stable organometallic compounds, which are bonded covalently. Organolithium compounds are electrically non-conducting volatile solids or liquids that melt at low temperatures, and tend to form oligomers with the structure (RLi)_x where R is the organic group. As the electropositive nature of lithium puts most of the charge density of the bond on the carbon atom, effectively creating a carbanion, organolithium compounds are extremely powerful bases and nucleophiles. For use as bases, butyllithiums are often used and are commercially available. An example of an organolithium compound is methyllithium ((CH₃Li)_x), which exists in tetrameric (x = 4) and hexameric (x = 6) forms.

The application of organosodium compounds in chemistry is limited in part due to competition from organolithium compounds, which are commercially available and exhibit more convenient reactivity. The principal organosodium compound of commercial importance is sodium cyclopentadienide. Sodium tetraphenylborate can also be classified as an organosodium compound since in the solid state sodium is bound to the aryl groups. Organometallic compounds of the higher alkali metals are even more reactive than organosodium compounds and of limited utility. A notable reagent is Schlosser's base, a mixture of n-butyllithium and potassium tert-butoxide. This reagent reacts with propene to form the compound allylpotassium (KCH₂CHCH₂). cis-2-Butene and trans-2-butene equilibrate when in contact with alkali metals. Whereas isomerization is fast with lithium and sodium, it is slow with the higher alkali metals. The higher alkali metals also favor the sterically congested conformation. Several crystal structures of organopotassium compounds have been reported, establishing that they, like the sodium compounds, are polymeric. Organosodium, organopotassium, organorubidium and organocaesium compounds are all mostly ionic and are insoluble (or nearly so) in nonpolar solvents.

Extensions

See also: Ununennium

Empirical (Na–Cs, Mg–Ra) and predicted (Fr–Uhp, Ubn–Uhh) atomic radius of the alkali and alkaline earth metals from the third to the ninth period, measured in angstroms

Although francium is the heaviest alkali metal that has been discovered, there has been some theoretical work predicting the physical and chemical characteristics of the hypothetical heavier alkali metals. Being the first period 8 element, the undiscovered element ununennium (element 119) is predicted to be the next alkali metal after francium and behave much like their lighter congeners; however, it is also predicted to differ from the lighter alkali metals in some properties. Its chemistry is predicted to be closer to that of potassium or rubidium instead of caesium or francium. This is unusual as periodic trends, ignoring relativistic effects would predict ununennium to be even more reactive than caesium and francium. This lowered reactivity is due to the relativistic stabilisation of ununennium's valence electron, increasing ununennium's first ionisation energy and decreasing the metallic and ionic radii; this effect is already seen for francium. This assumes that ununennium will behave chemically as an alkali metal, which, although likely, may not be true due to relativistic effects. The relativistic stabilisation of the 8s orbital also increases ununennium's electron affinity far beyond that of caesium and francium; indeed, ununennium is expected to have an electron affinity higher than all the alkali metals lighter than it. Relativistic effects also cause a very large drop in the polarisability of ununennium. On the other hand, ununennium is predicted to continue the trend of melting points decreasing going down the group, being expected to have a melting point between 0 °C and 30 °C.

Empirical (Na–Fr) and predicted (Uue) electron affinity of the alkali metals from the third to the eighth period, measured in electron volts

The stabilisation of ununennium's valence electron and thus the contraction of the 8s orbital cause its atomic radius to be lowered to 240 pm, very close to that of rubidium (247 pm), so that the chemistry of ununennium in the +1 oxidation state should be more similar to the chemistry of rubidium than to that of francium. On the other hand, the ionic radius of the Uue⁺ ion is predicted to be larger than that of Rb⁺, because the 7p orbitals are destabilised and are thus larger than the p-orbitals of the lower shells. Ununennium may also show the +3 oxidation state, which is not seen in any other alkali metal, in addition to the +1 oxidation state that is characteristic of the other alkali metals and is also the main oxidation state of all the known alkali metals: this is because of the destabilisation and expansion of the 7p_3/2 spinor, causing its outermost electrons to have a lower ionisation energy than what would otherwise be expected. Indeed, many ununennium compounds are expected to have a large covalent character, due to the involvement of the 7p_3/2 electrons in the bonding.

Empirical (Na–Fr, Mg–Ra) and predicted (Uue–Uhp, Ubn–Uhh) ionisation energy of the alkali and alkaline earth metals from the third to the ninth period, measured in electron volts

Not as much work has been done predicting the properties of the alkali metals beyond ununennium. Although a simple extrapolation of the periodic table would put element 169, unhexennium, under ununennium, Dirac-Fock calculations predict that the next alkali metal after ununennium may actually be element 165, unhexpentium, which is predicted to have the electron configuration [Uuo] 5g¹⁸ 6f¹⁴ 7d¹⁰ 8s² 8p_1/2² 9s¹. Further calculations show that unhexpentium would follow the trend of increasing ionisation energy beyond caesium, having an ionisation energy comparable to that of sodium, and that it should also continue the trend of decreasing atomic radii beyond caesium, having an atomic radius comparable to that of potassium. However, the 7d electrons of unhexpentium may also be able to participate in chemical reactions along with the 9s electron, possibly allowing oxidation states beyond +1 and perhaps even making unhexpentium behave more like a boron group element than an alkali metal.

The probable properties of the alkali metals beyond unhexpentium have not been explored yet as of 2012. In periods 8 and above of the periodic table, relativistic and shell-structure effects become so strong that extrapolations from lighter congeners become completely inaccurate. In addition, the relativistic and shell-structure effects (which stabilise the s-orbitals and destabilise and expand the d-, f-, and g-orbitals of higher shells) have opposite effects, causing even larger difference between relativistic and non-relativistic calculations of the properties of elements with such high atomic numbers. Due to the alkali and alkaline earth metals both being s-block elements, these predictions for the trends and properties of ununennium and unhexpentium also mostly hold quite similarly to the corresponding alkaline earth metals unbinilium (Ubn) and unhexhexium (Uhh).

Other similar substances

Hydrogen

Main article: Hydrogen

Hydrogen gas glowing in a discharge tube

The element hydrogen, with one electron per neutral atom, is usually placed at the top of Group 1 of the periodic table for convenience, but hydrogen is not normally considered to be an alkali metal; when it is considered to be an alkali metal, it is because of its atomic properties and not its chemical properties. Under typical conditions, pure hydrogen exists as a diatomic gas consisting of two atoms per molecule (H₂); however, the alkali metals only form diatomic molecules (such as dilithium, Li₂) at high temperatures, when they are in the gaseous state.

Hydrogen, like the alkali metals, has one valence electron and reacts easily with the halogens, but the similarities end there. Its placement above lithium is primarily due to its electron configuration and not its chemical properties. It is sometimes placed above carbon due to their similar electronegativities or fluorine due to their similar chemical properties.

The first ionisation energy of hydrogen (1312.0 kJ/mol) is much higher than that of the alkali metals. As only one additional electron is required to fill in the outermost shell of the hydrogen atom, hydrogen often behaves like a halogen, forming the negative hydride ion, and is sometimes considered to be a halogen. (The alkali metals can also form negative ions, known as alkalides, but these are little more than laboratory curiosities, being unstable.) Under extremely high pressures, such as those found at the cores of Jupiter and Saturn, hydrogen does become metallic and behaves like an alkali metal; in this phase, it is known as metallic hydrogen.

Ammonium

Main article: Ammonium

The ammonium ion (NH+
4) has very similar properties to the heavier alkali metals, acting as an alkali metal intermediate between potassium and rubidium, and is often considered a close relative. For example, most alkali metal salts are soluble in water, a property which ammonium salts share. Ammonium is expected to behave stably as a metal (NH+
4 ions in a sea of electrons) at very high pressures (though less than the typical pressure where transitions from insulating to metallic behaviour occur around, 100 GPa), and could possibly occur inside the ice giants Uranus and Neptune, which may have significant impacts on their interior magnetic fields. It has been estimated that the transition from a mixture of ammonia and dihydrogen molecules to metallic ammonium may occur at pressures just below 25 GPa.

Thallium

Main article: Thallium

Very pure thallium pieces in a glass ampoule, stored under argon gas

Thallium displays the +1 oxidation state that all the known alkali metals display, and thallium compounds with thallium in its +1 oxidation state closely resemble the corresponding potassium or silver compounds due to the similar ionic radii of the Tl⁺ (164 pm), K⁺ (152 pm) and Ag⁺ (129 pm) ions. It was sometimes considered an alkali metal in continental Europe (but not in England) in the years immediately following its discovery, and was placed just after caesium as the sixth alkali metal in Dmitri Mendeleev's 1869 periodic table and Julius Lothar Meyer's 1868 periodic table. (Mendeleev's 1871 periodic table and Meyer's 1870 periodic table put thallium in its current position in the boron group and leave the space below caesium blank.) However, thallium also displays the oxidation state +3, which no known alkali metal displays (although ununennium, the undiscovered seventh alkali metal, is predicted to possibly display the +3 oxidation state). The sixth alkali metal is now considered to be francium.

Copper, silver, and gold

Main article: Group 11 element

Copper

Silver

Gold

The group 11 metals, copper, silver, and gold, are typically categorised as transition metals given they can form ions with incomplete d-shells. Physically, they have the relatively low melting points and high electronegativity values associated with post-transition metals. "The filled d subshell and free s electron of Cu, Ag, and Au contribute to their high electrical and thermal conductivity. Transition metals to the left of group 11 experience interactions between s electrons and the partially filled d subshell that lower electron mobility." Chemically, the group 11 metals behave like main-group metals in their +1 valence states, and are hence somewhat related to the alkali metals: this is the reason for their previously being labelled as "group IB", paralleling the alkali metals' "group IA". They are occasionally classified as post-transition metals. Their spectra are however analogous to those of the alkali metals.

In Mendeleev's 1871 periodic table, copper, silver, and gold are listed twice, once under group VIII (with the iron triad and platinum group metals), and once under group IB. Group IB was nonetheless parenthesized to note that it was tentative. Mendeleev's main criterion for group assignment was the maximum oxidation state of an element: on that basis, the group 11 elements could not be classified in group IB, due to the existence of Cu(II) and Au(III) compounds being known at that time. However, eliminating group IB would make group I the only main group (group VIII was labelled a transition group) to lack an A–B bifurcation. Soon afterwards, a majority of chemists chose to classify these elements in group IB and remove them from group VIII for the resulting symmetry: this was the predominant classification until the rise of the modern medium-long 18-column periodic table, which separated the alkali metals and group 11 metals.

History

Petalite, the lithium mineral from which lithium was first isolated

Sodium compounds have been known since ancient times; salt (sodium chloride) has been an important commodity in human activities, as testified by the English word salary, referring to salarium, the wafers of salt sometimes given to Roman soldiers along with their other wages. In medieval Europe a compound of sodium with the Latin name of sodanum was used as a headache remedy. While potash has been used since ancient times, it was not understood for most of its history to be a fundamentally different substance from sodium mineral salts. Georg Ernst Stahl obtained experimental evidence which led him to suggest the fundamental difference of sodium and potassium salts in 1702, and Henri Louis Duhamel du Monceau was able to prove this difference in 1736. The exact chemical composition of potassium and sodium compounds, and the status as chemical element of potassium and sodium, was not known then, and thus Antoine Lavoisier did include the alkali in his list of chemical elements in 1789.

Pure potassium was first isolated in 1807 in England by Sir Humphry Davy, who derived it from caustic potash (KOH, potassium hydroxide) by the use of electrolysis of the molten salt with the newly invented voltaic pile. Previous attempts at electrolysis of the aqueous salt were unsuccessful due to potassium's extreme reactivity. Potassium was the first metal that was isolated by electrolysis. Later that same year, Davy reported extraction of sodium from the similar substance caustic soda (NaOH, lye) by a similar technique, demonstrating the elements, and thus the salts, to be different. Later that year, the first pieces of pure molten sodium metal were similarly prepared by Humphry Davy through the electrolysis of molten caustic soda (now called sodium hydroxide).

Johann Wolfgang Döbereiner was among the first to notice similarities between what are now known as the alkali metals.

Petalite (LiAlSi₄O₁₀) was discovered in 1800 by the Brazilian chemist José Bonifácio de Andrada in a mine on the island of Utö, Sweden. However, it was not until 1817 that Johan August Arfwedson, then working in the laboratory of the chemist Jöns Jacob Berzelius, detected the presence of a new element while analyzing petalite ore. This new element was noted by him to form compounds similar to those of sodium and potassium, though its carbonate and hydroxide were less soluble in water and more alkaline than the other alkali metals. Berzelius gave the unknown material the name "lithion/lithina", from the Greek word λιθoς (transliterated as lithos, meaning "stone"), to reflect its discovery in a solid mineral, as opposed to potassium, which had been discovered in plant ashes, and sodium, which was known partly for its high abundance in animal blood. He named the metal inside the material "lithium". Lithium, sodium, and potassium were part of the discovery of periodicity, as they are among a series of triads of elements in the same group that were noted by Johann Wolfgang Döbereiner in 1850 as having similar properties.

Lepidolite, the rubidium mineral from which rubidium was first isolated

Rubidium and caesium were the first elements to be discovered using the spectroscope, invented in 1859 by Robert Bunsen and Gustav Kirchhoff. The next year, they discovered caesium in the mineral water from Bad Dürkheim, Germany. Their discovery of rubidium came the following year in Heidelberg, Germany, finding it in the mineral lepidolite. The names of rubidium and caesium come from the most prominent lines in their emission spectra: a bright red line for rubidium (from the Latin word rubidus, meaning dark red or bright red), and a sky-blue line for caesium (derived from the Latin word caesius, meaning sky-blue).

Around 1865 John Newlands produced a series of papers where he listed the elements in order of increasing atomic weight and similar physical and chemical properties that recurred at intervals of eight; he likened such periodicity to the octaves of music. His version put all the alkali metals then known (lithium to caesium), as well as copper, silver, and thallium (which show the +1 oxidation state characteristic of the alkali metals), together into a group. His table placed hydrogen with the halogens.

Mendeleev's periodic system proposed in 1871 showing hydrogen and the alkali metals as part of his group I

After 1869, Dmitri Mendeleev proposed his periodic table placing lithium at the top of a group with sodium, potassium, rubidium, caesium, and thallium. Two years later, Mendeleev revised his table, placing hydrogen in group 1 above lithium, and also moving thallium to the boron group. In this 1871 version, copper, silver, and gold were placed twice, once as part of group IB, and once as part of a "group VIII" encompassing today's groups 8 to 11. After the introduction of the 18-column table, the group IB elements were moved to their current position in the d-block, while alkali metals were left in group IA. Later the group's name was changed to group 1 in 1988. The trivial name "alkali metals" comes from the fact that the hydroxides of the group 1 elements are all strong alkalis when dissolved in water.

There were at least four erroneous and incomplete discoveries before Marguerite Perey of the Curie Institute in Paris, France discovered francium in 1939 by purifying a sample of actinium-227, which had been reported to have a decay energy of 220 keV. However, Perey noticed decay particles with an energy level below 80 keV. Perey thought this decay activity might have been caused by a previously unidentified decay product, one that was separated during purification, but emerged again out of the pure actinium-227. Various tests eliminated the possibility of the unknown element being thorium, radium, lead, bismuth, or thallium. The new product exhibited chemical properties of an alkali metal (such as coprecipitating with caesium salts), which led Perey to believe that it was element 87, caused by the alpha decay of actinium-227. Perey then attempted to determine the proportion of beta decay to alpha decay in actinium-227. Her first test put the alpha branching at 0.6%, a figure that she later revised to 1%. It was the last element discovered in nature, rather than by synthesis.

The next element below francium (eka-francium) is very likely to be ununennium (Uue), element 119, although this is not completely certain due to relativistic effects. The synthesis of ununennium was first attempted in 1985 by bombarding a target of einsteinium-254 with calcium-48 ions at the superHILAC accelerator at Berkeley, California. No atoms were identified, leading to a limiting yield of 300 nb.

254
99Es + 48
20Ca → 302
119Uue* → no atoms

It is highly unlikely that this reaction will be able to create any atoms of ununennium in the near future, given the extremely difficult task of making sufficient amounts of ²⁵⁴Es, which is favoured for production of ultraheavy elements because of its large mass, relatively long half-life of 270 days, and availability in significant amounts of several micrograms, to make a large enough target to increase the sensitivity of the experiment to the required level; einsteinium has not been found in nature and has only been produced in laboratories. However, given that ununennium is only the first period 8 element on the extended periodic table, it may well be discovered in the near future through other reactions; indeed, another attempt to synthesise ununennium by bombarding a berkelium target with titanium ions is under way at the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, Germany. Currently, none of the period 8 elements have been discovered yet, and it is also possible, due to drip instabilities, that only the lower period 8 elements, up to around element 128, are physically possible. No attempts at synthesis have been made for any heavier alkali metals, such as unhexpentium, due to their extremely high atomic number.

Occurrence

In the Solar System

Estimated abundances of the chemical elements in the Solar system. Hydrogen and helium are most common, from the Big Bang. The next three elements (lithium, beryllium, and boron) are rare because they are poorly synthesized in the Big Bang and also in stars. The two general trends in the remaining stellar-produced elements are: (1) an alternation of abundance in elements as they have even or odd atomic numbers, and (2) a general decrease in abundance, as elements become heavier. Iron is especially common because it represents the minimum energy nuclide that can be made by fusion of helium in supernovae.

The Oddo-Harkins rule holds that elements with even atomic numbers are more common that those with odd atomic numbers, with the exception of hydrogen. This rule argues that elements with odd atomic numbers have one unpaired proton and are more likely to capture another, thus increasing their atomic number. In elements with even atomic numbers, protons are paired, with each member of the pair offsetting the spin of the other, enhancing stability. All the alkali metals have odd atomic numbers and they are not as common as the elements with even atomic numbers adjacent to them (the noble gases and the alkaline earth metals) in the Solar System. The heavier alkali metals are also less abundant than the lighter ones as the alkali metals from rubidium onward can only be synthesized in supernovae and not in stellar nucleosynthesis. Lithium is also much less abundant than sodium and potassium as it is poorly synthesized in both Big Bang nucleosynthesis and in stars: the Big Bang could only produce trace quantities of lithium, beryllium and boron due to the absence of a stable nucleus with 5 or 8 nucleons, and stellar nucleosynthesis could only pass this bottleneck by the triple-alpha process, fusing three helium nuclei to form carbon, and skipping over those three elements.

On Earth

Spodumene, an important lithium mineral

The Earth formed from the same cloud of matter that formed the Sun, but the planets acquired different compositions during the formation and evolution of the solar system. In turn, the natural history of the Earth caused parts of this planet to have differing concentrations of the elements. The mass of the Earth is approximately 5.98×10²⁴ kg. It is composed mostly of iron (32.1%), oxygen (30.1%), silicon (15.1%), magnesium (13.9%), sulfur (2.9%), nickel (1.8%), calcium (1.5%), and aluminium (1.4%); with the remaining 1.2% consisting of trace amounts of other elements. Due to mass segregation, the core region is believed to be primarily composed of iron (88.8%), with smaller amounts of nickel (5.8%), sulfur (4.5%), and less than 1% trace elements.

The alkali metals, due to their high reactivity, do not occur naturally in pure form in nature. They are lithophiles and therefore remain close to the Earth's surface because they combine readily with oxygen and so associate strongly with silica, forming relatively low-density minerals that do not sink down into the Earth's core. Potassium, rubidium and caesium are also incompatible elements due to their low ionic radii.

Sodium and potassium are very abundant in earth, both being among the ten most common elements in Earth's crust; sodium makes up approximately 2.6% of the Earth's crust measured by weight, making it the sixth most abundant element overall and the most abundant alkali metal. Potassium makes up approximately 1.5% of the Earth's crust and is the seventh most abundant element. Sodium is found in many different minerals, of which the most common is ordinary salt (sodium chloride), which occurs in vast quantities dissolved in seawater. Other solid deposits include halite, amphibole, cryolite, nitratine, and zeolite. Many of these solid deposits occur as a result of ancient seas evaporating, which still occurs now in places such as Utah's Great Salt Lake and the Dead Sea. Despite their near-equal abundance in Earth's crust, sodium is far more common than potassium in the ocean, both because potassium's larger size makes its salts less soluble, and because potassium is bound by silicates in soil and what potassium leaches is absorbed far more readily by plant life than sodium.

Despite its chemical similarity, lithium typically does not occur together with sodium or potassium due to its smaller size. Due to its relatively low reactivity, it can be found in seawater in large amounts; it is estimated that seawater is approximately 0.14 to 0.25 parts per million (ppm) or 25 micromolar. Its diagonal relationship with magnesium often allows it to replace magnesium in ferromagnesium minerals, where its crustal concentration is about 18 ppm, comparable to that of gallium and niobium. Commercially, the most important lithium mineral is spodumene, which occurs in large deposits worldwide.

Rubidium is approximately as abundant as zinc and more abundant than copper. It occurs naturally in the minerals leucite, pollucite, carnallite, zinnwaldite, and lepidolite, although none of these contain only rubidium and no other alkali metals. Caesium is more abundant than some commonly known elements, such as antimony, cadmium, tin, and tungsten, but is much less abundant than rubidium.

Francium-223, the only naturally occurring isotope of francium, is the product of the alpha decay of actinium-227 and can be found in trace amounts in uranium and thorium minerals. In a given sample of uranium, there is estimated to be only one francium atom for every 10¹⁸ uranium atoms. It has been calculated that there is at most 30 g of francium in the earth's crust at any time, due to its extremely short half-life of 22 minutes.

Production and isolation

Salt flats are rich in lithium, such as these in Salar del Hombre Muerto, Argentina (left) and Uyuni, Bolivia (right). The lithium-rich brine is concentrated by pumping it into solar evaporation ponds (visible in Argentina image).

The production of pure alkali metals is difficult due to their extreme reactivity with commonly used substances, such as water. The alkali metals are so reactive that they cannot be displaced by other elements and must be isolated through high-energy methods such as electrolysis.

Lithium salts have to be extracted from the water of mineral springs, brine pools, and brine deposits. The metal is produced electrolytically from a mixture of fused lithium chloride and potassium chloride.

Potassium occurs in many minerals, such as sylvite (potassium chloride). It is occasionally produced through separating the potassium from the chlorine in potassium chloride, but is more often produced through electrolysis of potassium hydroxide, found extensively in places such as Canada, Russia, Belarus, Germany, Israel, United States, and Jordan, in a method similar to how sodium was produced in the late 1800s and early 1900s. It can also be produced from seawater. Sodium occurs mostly in seawater and dried seabed, but is now produced through electrolysis of sodium chloride by lowering the melting point of the substance to below 700 °C through the use of a Downs cell. Extremely pure sodium can be produced through the thermal decomposition of sodium azide.

This sample of uraninite contains about 100,000 atoms (3.3×10⁻²⁰ g) of francium-223 at any given time.

For several years in the 1950s and 1960s, a by-product of the potassium production called Alkarb was a main source for rubidium. Alkarb contained 21% rubidium while the rest was potassium and a small fraction of caesium. Today the largest producers of caesium, for example the Tanco Mine, Manitoba, Canada, produce rubidium as by-product from pollucite. Today, a common method for separating rubidium from potassium and caesium is the fractional crystallization of a rubidium and caesium alum (Cs, Rb)Al(SO₄)₂·12H₂O, which yields pure rubidium alum after approximately 30 different reactions. The limited applications and the lack of a mineral rich in rubidium limits the production of rubidium compounds to 2 to 4 tonnes per year. Caesium, however, is not produced from the above reaction. Instead, the mining of pollucite ore is the main method of obtaining pure caesium, extracted from the ore mainly by three methods: acid digestion, alkaline decomposition, and direct reduction. Both metals are produced as byproducts of lithium production: after 1958, when interest in lithium's thermonuclear properties increased sharply, the production of rubidium and caesium also increased correspondingly.

Francium-223, the only naturally occurring isotope of francium, is produced naturally as the product of the alpha decay of actinium-227. Francium can be found in trace amounts in uranium and thorium minerals; it has been calculated that at most there are 30 g of francium in the earth's crust at any given time. As a result of its extreme rarity in nature, most francium is synthesized in the nuclear reaction ¹⁹⁷Au + ¹⁸O → ²¹⁰Fr + 5 n, yielding francium-209, francium-210, and francium-211. The greatest quantity of francium ever assembled to date is about 300,000 neutral atoms, which were synthesized using the nuclear reaction given above.

From their silicate ores, all the alkali metals may be obtained the same way: sulfuric acid is first used to dissolve the desired alkali metal ion and aluminium(III) ions from the ore (leaching), whereupon basic precipitation removes aluminium ions from the mixture by precipitating it as the hydroxide. The remaining insoluble alkali metal carbonate is then precipitated selectively; the salt is then dissolved in hydrochloric acid. The result is then left to evaporate and the alkali metal can then be isolated through electrolysis.

Lithium and sodium are typically isolated through electrolysis from their liquid chlorides, with calcium chloride typically added to lower the melting point of the mixture. The heavier alkali metals, however, is more typically isolated in a different way, where a reducing agent (typically sodium for potassium and magnesium or calcium for the heaviest alkali metals) is used to reduce the alkali metal chloride. The liquid or gaseous product (the alkali metal) then undergoes fractional distillation for purification.

Applications

All of the discovered alkali metals excluding francium have many applications. Lithium is often used in batteries, and lithium oxide can help process silica. Lithium can also be used to make lubricating greases, air treatment, and aluminium production.

Pure sodium has many applications, including use in sodium-vapour lamps, which produce very efficient light compared to other types of lighting, and can help smooth the surface of other metals. Being a strong reducing agent, it is often used to reduce many other metals, such as titanium and zirconium, from their chlorides. Sodium compounds have many applications as well, the most well-known compound being table salt. Sodium is also used in soap as salts of fatty acids.

Potassium compounds are often used as fertilisers as potassium is an important element for plant nutrition. Other potassium ions are often used to hold anions. Potassium hydroxide is a very strong base, and is used to control the pH of various substances.

FOCS 1, a caesium atomic clock in Switzerland

Rubidium and caesium are often used in atomic clocks. Caesium atomic clocks are extraordinarily accurate; if a clock had been made at the time of the dinosaurs, it would be off by less than four seconds (after 80 million years). For that reason, caesium atoms are used as the definition of the second. Rubidium ions are often used in purple fireworks, and caesium is often used in drilling fluids in the petroleum industry.

Francium has no commercial applications, but because of francium's relatively simple atomic structure, among other things, it has been used in spectroscopy experiments, leading to more information regarding energy levels and the coupling constants between subatomic particles. Studies on the light emitted by laser-trapped francium-210 ions have provided accurate data on transitions between atomic energy levels, similar to those predicted by quantum theory.

Biological role and precautions

Lithium carbonate

Lithium naturally only occurs in traces in biological systems and has no known biological role, but does have effects on the body when ingested. Lithium carbonate is used as a mood stabiliser in psychiatry to treat bipolar disorder (manic-depression) in daily doses of about 0.5 to 2 grams, although there are side-effects. Excessive ingestion of lithium causes drowsiness, slurred speech and vomiting, among other symptoms, and poisons the central nervous system, which is dangerous as the required dosage of lithium to treat bipolar disorder is only slightly lower than the toxic dosage. Its biochemistry, the way it is handled by the human body and studies using rats and goats suggest that it is an essential trace element, although the natural biological function of lithium in humans has yet to be identified.

Sodium and potassium occur in all known biological systems, generally functioning as electrolytes inside and outside cells. Sodium is an essential nutrient that regulates blood volume, blood pressure, osmotic equilibrium and pH; the minimum physiological requirement for sodium is 500 milligrams per day. Sodium chloride (also known as common salt) is the principal source of sodium in the diet, and is used as seasoning and preservative, such as for pickling and jerky; most of it comes from processed foods. The DRI for sodium is 1.5 grams per day, but most people in the United States consume more than 2.3 grams per day, the minimum amount that promotes hypertension; this in turn causes 7.6 million premature deaths worldwide.

Potassium is the major cation (positive ion) inside animal cells, while sodium is the major cation outside animal cells. The concentration differences of these charged particles causes a difference in electric potential between the inside and outside of cells, known as the membrane potential. The balance between potassium and sodium is maintained by ion pumps in the cell membrane. The cell membrane potential created by potassium and sodium ions allows the cell to generate an action potential—a "spike" of electrical discharge. The ability of cells to produce electrical discharge is critical for body functions such as neurotransmission, muscle contraction, and heart function.

A wheel type radiotherapy device which has a long collimator to focus the radiation into a narrow beam. The caesium-137 chloride radioactive source is the blue square, and gamma rays are represented by the beam emerging from the aperture. This was the radiation source involved in the Goiânia accident, containing about 93 grams of caesium-137 chloride.

Rubidium has no known biological role, but may help stimulate metabolism, and, similarly to caesium, replace potassium in the body causing potassium deficiency. Caesium compounds are rarely encountered by most people, but most caesium compounds are mildly toxic because of chemical similarity of caesium to potassium, allowing the caesium to replace the potassium in the body, causing potassium deficiency. Exposure to large amounts of caesium compounds can cause hyperirritability and spasms, but as such amounts would not ordinarily be encountered in natural sources, caesium is not a major chemical environmental pollutant. The median lethal dose (LD₅₀) value for caesium chloride in mice is 2.3 g per kilogram, which is comparable to the LD₅₀ values of potassium chloride and sodium chloride. Caesium chloride has been promoted as an alternative cancer therapy, but has been linked to the deaths of over 50 patients, on whom it was used as part of a scientifically unvalidated cancer treatment. Radioisotopes of caesium require special precautions: the improper handling of caesium-137 gamma ray sources can lead to release of this radioisotope and radiation injuries. Perhaps the best-known case is the Goiânia accident of 1987, in which an improperly-disposed-of radiation therapy system from an abandoned clinic in the city of Goiânia, Brazil, was scavenged from a junkyard, and the glowing caesium salt sold to curious, uneducated buyers. This led to four deaths and serious injuries from radiation exposure. Together with caesium-134, iodine-131, and strontium-90, caesium-137 was among the isotopes distributed by the Chernobyl disaster which constitute the greatest risk to health.

Francium has no biological role and is most likely to be toxic due to its extreme radioactivity, causing radiation poisoning, but since the greatest quantity of francium ever assembled to date is about 300,000 neutral atoms, it is unlikely that most people will ever encounter francium.

Notes

References

Further reading

• Bauer, Brent A., Robert Houlihan, Michael J. Ackerman, Katya Johnson, and Himeshkumar Vyas (2006). "Acquired Long QT Syndrome Secondary to Cesium Chloride Supplement". Journal of Alternative and Complementary Medicine 12 (10): 1011–1014. doi:10.1089/acm.2006.12.1011. PMID 17212573. 
• Campbell, Linda M., Aaron T. Fisk, Xianowa Wang, Gunter Kock, and Derek C. Muir (2005). "Evidence for Biomagnification of Rubidium in Freshwater and Marine Food Webs". Canadian Journal of Fisheries and Aquatic Sciences 62 (5): 1161–1167. doi:10.1139/f05-027. 
• Chang, Cheng-Hung, and Tian Y. Tsong (2005). "Stochastic Resonance of Na, K-Ion Pumps on the Red Cell Membrane". AIP Conference Proceedings: 18th International Conference on Noise and Fluctuations 780. American Institute of Physics. pp. 587–590. doi:10.1063/1.2036821. ISBN 0-7354-0267-1. 
• Erermis, Serpil, Muge Tamar, Hatice Karasoy, Tezan Bildik, Eyup S. Ercan, and Ahmet Gockay (1997). "Double-Blind Randomised Trial of Modest Salt Restriction in Older People". Lancet 350 (9081): 850–854. doi:10.1016/S0140-6736(97)02264-2. PMID 9310603. 
• Joffe, Russell T., Stephen T. Sokolov and Anthony J. Levitt (2006). "Lithium and Triiodothyronine Augmentation of Antidepressants". Canadian Journal of Psychiatry 51 (12): 791–3. PMID 17168254. 
• Krachler, M, and E Rossipal (1999). "Trace Elements Transfer From Mother to the Newborn – Investigations on Triplets of Colostrum, Maternal and Umbilical Sera". European Journal of Clinical Nutrition 53 (6): 486–494. doi:10.1038/sj.ejcn.1600781. PMID 10403586. 
• Stein, Benjamin P., Stephen G. Benka, Phillip F. Schewe, and Bertram Schwarzhild (1996). "Physics Update". Physics Today 49 (6): 9. Bibcode:1996PhT....49f...9S. doi:10.1063/1.2807642. 

External links

• "Group 1: The Alkali Metals". Visual Elements. Royal Society of Chemistry. Retrieved 8 December 2009. 
• Atomic and Physical Properties of the Group 1 Elements An in-depth look at alkali metals
• Alkali Metal Bangs Filmed reactions of five-gram samples of the alkali metals with water

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

• 1. ベアメタル冠動脈ステントと比較した薬剤溶出性冠動脈ステント drug eluting compared to bare metal intracoronary stents
• 2. 限局進行性胆管癌に対する治療選択肢 treatment options for locally advanced cholangiocarcinoma
• 3. 気道ステント airway stents
• 4. 冠動脈ステント再狭窄 intracoronary stent restenosis
• 5. 内視鏡的逆行性胆道膵管造影（ERCP）の稀な合併症 rare complications of endoscopic retrograde cholangiopancreatography ercp

English Journal

• Mechanistic aspects of the nucleophilic substitution of pectin. On the formation of chloromethane.

• Sailaukhanuly Y1, Sárossy Z2, Carlsen L3, Egsgaard H4.
• Chemosphere.Chemosphere.2014 Sep;111C:575-579. doi: 10.1016/j.chemosphere.2014.05.001. Epub 2014 May 29.
• Chloromethane, accounting for approximately 16% of the tropospheric chlorine, is mainly coming from natural sources. However anthropogenic activities, such as combustion of biomass may contribute significantly as well. The present study focuses on the thermal solid state reaction between pectin, an
• PMID 24997968

• Dispersive solid-phase extraction followed by high-performance liquid chromatography/tandem mass spectrometry for the determination of ricinine in cooking oil.

• Cai M1, Chen X2, Wei X1, Pan S2, Zhao Y2, Jin M3.
• Food chemistry.Food Chem.2014 Sep 1;158:459-65. doi: 10.1016/j.foodchem.2014.02.114. Epub 2014 Feb 28.
• A rapid and accurate method by liquid chromatography/tandem mass spectrometry (LC-MS/MS) using positive electrospray was established for the determination of ricinine in cooking oils. The homogenized samples, spiked with (13)C6-labelled ricinine as an internal standard, were extracted using ethanol/
• PMID 24731370

• Enhanced formaldehyde oxidation on Pt/MnO2 catalysts modified with alkali metal salts.

• Chen Y1, He J2, Tian H3, Wang D4, Yang Q5.
• Journal of colloid and interface science.J Colloid Interface Sci.2014 Aug 15;428:1-7. doi: 10.1016/j.jcis.2014.04.028. Epub 2014 Apr 24.
• Novel Pt/MnO2 catalysts modified with alkali metal salts were prepared and exhibited excellent catalytic activity for formaldehyde oxidation. The effects of both cation and anion in the salts were investigated on the structure of catalysts and their catalytic activity. The Na(+) modification was dem
• PMID 24910027

Japanese Journal

• 低融点アルカリ金属溶融塩の電気化学デバイスへの応用

• 窪田 啓吾
• 溶融塩および高温化学 58(1), 14-19, 2015
• NAID 40020395510

• Effect of alkali metal ions on structure and luminescent properties of red emitting β-Ca3(PO4)2:Eu3+ phosphor

• , , , ,
• Journal of the Ceramic Society of Japan 123(1434), 69-72, 2015
• … Effect of co-doping alkali metal ions A+ (A = Li, Na, K) on the structure and luminescent properties of Ca3(PO4)2:Eu3+ phosphor was investigated and compared, Li+ ion is confirmed to be the most suitable charge compensator for Ca3(PO4)2:Eu3+ phosphor. …
• NAID 130004951101

• Ion Sensing by Charge Transfer Absorption Variations of Benzocrown–Bipyridinium Conjugates with an Alkyl Chain

• , ,
• Analytical Sciences 31(1), 23-27, 2015
• … The guest-induced color change of 1 and 2 can be used for alkali and alkaline metal ion sensing. …
• NAID 130004827447

Related Links

• Welcome to Alkali Metals.com

Home Alkali Metals Ltd (AML) was established in April 1968 by late Dr. Y.V.S.S. Murty, who was the founder Chairman to manufacture Sodium Metal and down stream chemicals in its plants at Hyderabad ...

• Chemical Elements.com - Alkali Metals

An up-to-date periodic table with detailed but easy to understand information ... The alkali metals, found in group 1 of the periodic table (formerly known as group IA), are very reactive metals that do not occur freely in nature.

---

★リンクテーブル★

リンク元	「alkaline metal」「アルカリ金属」
関連記事	「meta」「metal」「met」「alkali」

「alkaline metal」

　　[★]

• アルカリ金属

関

alkali metal

「アルカリ金属」

　　[★]

英

alkali metal、alkaline metal

「meta」

　　[★]

同

metastasis, ガン転移

• pref.

• 後続、後位。変化、変成。超越、一段と高い段階の。～の異性体。変性によって得られた、無水～の

• ex.

• metanephros 後腎

「metal」

　　[★]

• n.

• 金属

• adj.

• 金属の

関

metallic、metallo

　 　

「met」

　　[★]

• meetの過去形
• →meta
• methionine

　

「alkali」

　　[★]

• アルカリ

関

alkaline