determine the order of constituents in; "They sequenced the human genome"
a following of one thing after another in time; "the doctor saw a sequence of patients" (同)chronological sequence, succession, successiveness, chronological succession
film consisting of a succession of related shots that develop a given subject in a movie (同)episode
serial arrangement in which things follow in logical order or a recurrent pattern; "the sequence of names was alphabetical"; "he invented a technique to determine the sequence of base pairs in DNA"
several repetitions of a melodic phrase in different keys
arrange in a sequence
especially fine or decorative clothing (同)raiment, regalia
an arrangement of aerials spaced to give desired directional characteristics
an impressive display; "it was a bewildering array of books"; "his tools were in an orderly array on the basement wall"
an orderly arrangement; "an array of troops in battle order"
an investigation of the component parts of a whole and their relations in making up the whole
the abstract separation of a whole into its constituent parts in order to study the parts and their relations (同)analytic thinking
a branch of mathematics involving calculus and the theory of limits; sequences and series and integration and differentiation
a form of literary criticism in which the structure of a piece of writing is analyzed
the use of closed-class words instead of inflections: e.g., `the father of the bride instead of `the brides father
A DNA microarray (also commonly known as DNA chip or biochip) is a collection of microscopic DNA spots attached to a solid surface. Scientists use DNA microarrays to measure the expression levels of large numbers of genes simultaneously or to genotype multiple regions of a genome. Each DNA spot contains picomoles (10−12 moles) of a specific DNA sequence, known as probes (or reporters or oligos). These can be a short section of a gene or other DNA element that are used to hybridize a cDNA or cRNA (also called anti-sense RNA) sample (called target) under high-stringency conditions. Probe-target hybridization is usually detected and quantified by detection of fluorophore-, silver-, or chemiluminescence-labeled targets to determine relative abundance of nucleic acid sequences in the target.
Contents
1The basic microarray
2History
3Principle
4Uses and types
4.1Fabrication
4.2Spotted vs. in situ synthesised arrays
4.3Two-channel vs. one-channel detection
5Microarrays and bioinformatics
5.1Experimental design
5.2Standardization
5.3Statistical analysis
5.4Relation between probe and gene
5.5Data warehousing
6See also
7References
8Glossary
9External links
The basic microarray
Since an array can contain tens of thousands of probes, a microarray experiment can accomplish many genetic tests in parallel. Therefore arrays have dramatically accelerated many types of investigation. In standard microarrays, the probes are synthesized and then attached via surface engineering to a solid surface by a covalent bond to a chemical matrix (via epoxy-silane, amino-silane, lysine, polyacrylamide or others). The solid surface can be glass or a silicon chip, in which case they are colloquially known as an Affy chip when an Affymetrix chip is used. Other microarray platforms, such as Illumina, use microscopic beads, instead of the large solid support. Alternatively, microarrays can be constructed by the direct synthesis of oligonucleotide probes on solid surfaces. DNA arrays are different from other types of microarray only in that they either measure DNA or use DNA as part of its detection system.
DNA microarrays can be used to measure changes in expression levels, to detect single nucleotide polymorphisms (SNPs), or to genotype or targeted resequencing (see uses and types section). Microarrays also differ in fabrication, workings, accuracy, efficiency, and cost (see fabrication section). Additional factors for microarray experiments are the experimental design and the methods of analyzing the data (see Bioinformatics section).
History
Microarray technology evolved from Southern blotting, where fragmented DNA is attached to a substrate and then probed with a known DNA sequence.[1] The first reported use of this approach was the analysis of 378 arrayed lysed bacterial colonies each harboring a different sequence which were assayed in multiple replicas for expression of the genes in multiple normal and tumor tissue.[2] This was expanded to an analysis of more than 4000 human sequences with computer driven scanning and image processing for quantitative analysis of the sequences in human colonic tumors and normal tissue [3] and then to comparison of colonic tissues at different genetic risk.[4] The use of a collection of distinct DNAs in arrays for expression profiling was also described in 1987, and the arrayed DNAs were used to identify genes whose expression is modulated by interferon.[5] These early gene arrays were made by spotting cDNAs onto filter paper with a pin-spotting device. The use of miniaturized microarrays for gene expression profiling was first reported in 1995,[6] and a complete eukaryotic genome (Saccharomyces cerevisiae) on a microarray was published in 1997.[7]
Principle
Hybridization of the target to the probe.
Main article: Nucleic acid hybridization#Hybridization
For more details on this topic, see DNA microarray experiment.
The core principle behind microarrays is hybridization between two DNA strands, the property of complementary nucleic acid sequences to specifically pair with each other by forming hydrogen bonds between complementary nucleotide base pairs. A high number of complementary base pairs in a nucleotide sequence means tighter non-covalent bonding between the two strands. After washing off of non-specific bonding sequences, only strongly paired strands will remain hybridized. Fluorescently labeled target sequences that bind to a probe sequence generate a signal that depends on the hybridization conditions (such as temperature), and washing after hybridization. Total strength of the signal, from a spot (feature), depends upon the amount of target sample binding to the probes present on that spot. Microarrays use relative quantization in which the intensity of a feature is compared to the intensity of the same feature under a different condition, and the identity of the feature is known by its position.
The steps required in a microarray experiment.
Uses and types
Two Affymetrix chips. A match is shown at bottom left for size comparison.
Many types of arrays exist and the broadest distinction is whether they are spatially arranged on a surface or on coded beads:
The traditional solid-phase array is a collection of orderly microscopic "spots", called features, each with a thousands of identical and specific probes attached to a solid surface, such as glass, plastic or silicon biochip (commonly known as a genome chip, DNA chip or gene array). Thousands of these features can be placed in known locations on a single DNA microarray.
The alternative bead array is a collection of microscopic polystyrene beads, each with a specific probe and a ratio of two or more dyes, which do not interfere with the fluorescent dyes used on the target sequence.
DNA microarrays can be used to detect DNA (as in comparative genomic hybridization), or detect RNA (most commonly as cDNA after reverse transcription) that may or may not be translated into proteins. The process of measuring gene expression via cDNA is called expression analysis or expression profiling.
Applications include:
Application or technology
Synopsis
Gene expression profiling
In an mRNA or gene expression profiling experiment the expression levels of thousands of genes are simultaneously monitored to study the effects of certain treatments, diseases, and developmental stages on gene expression. For example, microarray-based gene expression profiling can be used to identify genes whose expression is changed in response to pathogens or other organisms by comparing gene expression in infected to that in uninfected cells or tissues.[8]
Comparative genomic hybridization
Assessing genome content in different cells or closely related organisms.[9][10]
GeneID
Small microarrays to check IDs of organisms in food and feed (like GMO [1]), mycoplasms in cell culture, or pathogens for disease detection, mostly combining PCR and microarray technology.
Chromatin immunoprecipitation on Chip
DNA sequences bound to a particular protein can be isolated by immunoprecipitating that protein (ChIP), these fragments can be then hybridized to a microarray (such as a tiling array) allowing the determination of protein binding site occupancy throughout the genome. Example protein to immunoprecipitate are histone modifications (H3K27me3, H3K4me2, H3K9me3, etc.), Polycomb-group protein (PRC2:Suz12, PRC1:YY1) and trithorax-group protein (Ash1) to study the epigenetic landscape or RNA Polymerase II to study the transcription landscape.
DamID
Analogously to ChIP, genomic regions bound by a protein of interest can be isolated and used to probe a microarray to determine binding site occupancy. Unlike ChIP, DamID does not require antibodies but makes use of adenine methylation near the protein's binding sites to selectively amplify those regions, introduced by expressing minute amounts of protein of interest fused to bacterial DNA adenine methyltransferase.
SNP detection
Identifying single nucleotide polymorphism among alleles within or between populations.[11] Several applications of microarrays make use of SNP detection, including Genotyping, forensic analysis, measuring predisposition to disease, identifying drug-candidates, evaluating germline mutations in individuals or somatic mutations in cancers, assessing loss of heterozygosity, or genetic linkage analysis.
Alternative splicing detection
An exon junction array design uses probes specific to the expected or potential splice sites of predicted exons for a gene. It is of intermediate density, or coverage, to a typical gene expression array (with 1-3 probes per gene) and a genomic tiling array (with hundreds or thousands of probes per gene). It is used to assay the expression of alternative splice forms of a gene. Exon arrays have a different design, employing probes designed to detect each individual exon for known or predicted genes, and can be used for detecting different splicing isoforms.
Fusion genes microarray
A Fusion gene microarray can detect fusion transcripts, e.g. from cancer specimens. The principle behind this is building on the alternative splicing microarrays. The oligo design strategy enables combined measurements of chimeric transcript junctions with exon-wise measurements of individual fusion partners.
Tiling array
Genome tiling arrays consist of overlapping probes designed to densely represent a genomic region of interest, sometimes as large as an entire human chromosome. The purpose is to empirically detect expression of transcripts or alternatively splice forms which may not have been previously known or predicted.
Fabrication
Microarrays can be manufactured in different ways, depending on the number of probes under examination, costs, customization requirements, and the type of scientific question being asked. Arrays may have as few as 10 probes or up to 2.1 million micrometre-scale probes from commercial vendors.
Spotted vs. in situ synthesised arrays
A DNA microarray being printed by a robot at the University of Delaware
Microarrays can be fabricated using a variety of technologies, including printing with fine-pointed pins onto glass slides, photolithography using pre-made masks, photolithography using dynamic micromirror devices, ink-jet printing,[12][13] or electrochemistry on microelectrode arrays.
In spotted microarrays, the probes are oligonucleotides, cDNA or small fragments of PCR products that correspond to mRNAs. The probes are synthesized prior to deposition on the array surface and are then "spotted" onto glass. A common approach utilizes an array of fine pins or needles controlled by a robotic arm that is dipped into wells containing DNA probes and then depositing each probe at designated locations on the array surface. The resulting "grid" of probes represents the nucleic acid profiles of the prepared probes and is ready to receive complementary cDNA or cRNA "targets" derived from experimental or clinical samples. This technique is used by research scientists around the world to produce "in-house" printed microarrays from their own labs. These arrays may be easily customized for each experiment, because researchers can choose the probes and printing locations on the arrays, synthesize the probes in their own lab (or collaborating facility), and spot the arrays. They can then generate their own labeled samples for hybridization, hybridize the samples to the array, and finally scan the arrays with their own equipment. This provides a relatively low-cost microarray that may be customized for each study, and avoids the costs of purchasing often more expensive commercial arrays that may represent vast numbers of genes that are not of interest to the investigator. Publications exist which indicate in-house spotted microarrays may not provide the same level of sensitivity compared to commercial oligonucleotide arrays,[14] possibly owing to the small batch sizes and reduced printing efficiencies when compared to industrial manufactures of oligo arrays.
In oligonucleotide microarrays, the probes are short sequences designed to match parts of the sequence of known or predicted open reading frames. Although oligonucleotide probes are often used in "spotted" microarrays, the term "oligonucleotide array" most often refers to a specific technique of manufacturing. Oligonucleotide arrays are produced by printing short oligonucleotide sequences designed to represent a single gene or family of gene splice-variants by synthesizing this sequence directly onto the array surface instead of depositing intact sequences. Sequences may be longer (60-mer probes such as the Agilent design) or shorter (25-mer probes produced by Affymetrix) depending on the desired purpose; longer probes are more specific to individual target genes, shorter probes may be spotted in higher density across the array and are cheaper to manufacture. One technique used to produce oligonucleotide arrays include photolithographic synthesis (Affymetrix) on a silica substrate where light and light-sensitive masking agents are used to "build" a sequence one nucleotide at a time across the entire array.[15] Each applicable probe is selectively "unmasked" prior to bathing the array in a solution of a single nucleotide, then a masking reaction takes place and the next set of probes are unmasked in preparation for a different nucleotide exposure. After many repetitions, the sequences of every probe become fully constructed. More recently, Maskless Array Synthesis from NimbleGen Systems has combined flexibility with large numbers of probes.[16]
Two-channel vs. one-channel detection
Diagram of typical dual-colour microarray experiment.
Two-color microarrays or two-channel microarrays are typically hybridized with cDNA prepared from two samples to be compared (e.g. diseased tissue versus healthy tissue) and that are labeled with two different fluorophores.[17] Fluorescent dyes commonly used for cDNA labeling include Cy3, which has a fluorescence emission wavelength of 570 nm (corresponding to the green part of the light spectrum), and Cy5 with a fluorescence emission wavelength of 670 nm (corresponding to the red part of the light spectrum). The two Cy-labeled cDNA samples are mixed and hybridized to a single microarray that is then scanned in a microarray scanner to visualize fluorescence of the two fluorophores after excitation with a laser beam of a defined wavelength. Relative intensities of each fluorophore may then be used in ratio-based analysis to identify up-regulated and down-regulated genes.[18]
Oligonucleotide microarrays often carry control probes designed to hybridize with RNA spike-ins. The degree of hybridization between the spike-ins and the control probes is used to normalize the hybridization measurements for the target probes. Although absolute levels of gene expression may be determined in the two-color array in rare instances, the relative differences in expression among different spots within a sample and between samples is the preferred method of data analysis for the two-color system. Examples of providers for such microarrays includes Agilent with their Dual-Mode platform, Eppendorf with their DualChip platform for colorimetric Silverquant labeling, and TeleChem International with Arrayit.
In single-channel microarrays or one-color microarrays, the arrays provide intensity data for each probe or probe set indicating a relative level of hybridization with the labeled target. However, they do not truly indicate abundance levels of a gene but rather relative abundance when compared to other samples or conditions when processed in the same experiment. Each RNA molecule encounters protocol and batch-specific bias during amplification, labeling, and hybridization phases of the experiment making comparisons between genes for the same microarray uninformative. The comparison of two conditions for the same gene requires two separate single-dye hybridizations. Several popular single-channel systems are the Affymetrix "Gene Chip", Illumina "Bead Chip", Agilent single-channel arrays, the Applied Microarrays "CodeLink" arrays, and the Eppendorf "DualChip & Silverquant". One strength of the single-dye system lies in the fact that an aberrant sample cannot affect the raw data derived from other samples, because each array chip is exposed to only one sample (as opposed to a two-color system in which a single low-quality sample may drastically impinge on overall data precision even if the other sample was of high quality). Another benefit is that data are more easily compared to arrays from different experiments so long as batch effects have been accounted for. A drawback to the one-color system is that, when compared to the two-color system, twice as many microarrays are needed to compare samples within an experiment.
Microarrays and bioinformatics
Gene expression values from microarray experiments can be represented as heat maps to visualize the result of data analysis.
The advent of inexpensive microarray experiments created several specific bioinformatics challenges:
the multiple levels of replication in experimental design (Experimental design)
the number of platforms and independent groups and data format (Standardization)
the treatment of the data (Statistical analysis)
accuracy and precision (Relation between probe and gene)
the sheer volume of data and the ability to share it (Data warehousing)
Experimental design
Due to the biological complexity of gene expression, the considerations of experimental design that are discussed in the expression profiling article are of critical importance if statistically and biologically valid conclusions are to be drawn from the data.
There are three main elements to consider when designing a microarray experiment. First, replication of the biological samples is essential for drawing conclusions from the experiment. Second, technical replicates (two RNA samples obtained from each experimental unit) help to ensure precision and allow for testing differences within treatment groups. The biological replicates include independent RNA extractions and technical replicates may be two aliquots[disambiguation needed] of the same extraction. Third, spots of each cDNA clone or oligonucleotide are present as replicates (at least duplicates) on the microarray slide, to provide a measure of technical precision in each hybridization. It is critical that information about the sample preparation and handling is discussed, in order to help identify the independent units in the experiment and to avoid inflated estimates of statistical significance.[19]
Standardization
Microarray data is difficult to exchange due to the lack of standardization in platform fabrication, assay protocols, and analysis methods. This presents an interoperability problem in bioinformatics. Various grass-roots open-source projects are trying to ease the exchange and analysis of data produced with non-proprietary chips:
For example, the "Minimum Information About a Microarray Experiment" (MIAME) checklist helps define the level of detail that should exist and is being adopted by many journals as a requirement for the submission of papers incorporating microarray results. But MIAME does not describe the format for the information, so while many formats can support the MIAME requirements, as of 2007[update] no format permits verification of complete semantic compliance.
The "MicroArray Quality Control (MAQC) Project" is being conducted by the US Food and Drug Administration (FDA) to develop standards and quality control metrics which will eventually allow the use of MicroArray data in drug discovery, clinical practice and regulatory decision-making.[20]
The MGED Society has developed standards for the representation of gene expression experiment results and relevant annotations.
Statistical analysis
See also: Gene chip analysis
Microarray data sets are commonly very large, and analytical precision is influenced by a number of variables. Statistical challenges include taking into account effects of background noise and appropriate normalization of the data. Normalization methods may be suited to specific platforms and, in the case of commercial platforms, the analysis may be proprietary.[citation needed] Algorithms that affect statistical analysis include:
Image analysis: gridding, spot recognition of the scanned image (segmentation algorithm), removal or marking of poor-quality and low-intensity features (called flagging).
Data processing: background subtraction (based on global or local background), determination of spot intensities and intensity ratios, visualisation of data (e.g. see MA plot), and log-transformation of ratios, global or local normalization of intensity ratios, and segmentation into different copy number regions using step detection algorithms.[21]
Identification of statistically significant changes: t-test, ANOVA, Bayesian method[22] Mann–Whitney test methods tailored to microarray data sets, which take into account multiple comparisons[23] or cluster analysis.[24] These methods assess statistical power based on the variation present in the data and the number of experimental replicates, and can help minimize Type I and type II errors in the analyses.[25]
Network-based methods: Statistical methods that take the underlying structure of gene networks into account, representing either associative or causative interactions or dependencies among gene products.[26]
Microarray data may require further processing aimed at reducing the dimensionality of the data to aid comprehension and more focused analysis.[27] Other methods permit analysis of data consisting of a low number of biological or technical replicates; for example, the Local Pooled Error (LPE) test pools standard deviations of genes with similar expression levels in an effort to compensate for insufficient replication.[28]
Relation between probe and gene
The relation between a probe and the mRNA that it is expected to detect is not trivial. Some mRNAs may cross-hybridize probes in the array that are supposed to detect another mRNA. In addition, mRNAs may experience amplification bias that is sequence or molecule-specific. Thirdly, probes that are designed to detect the mRNA of a particular gene may be relying on genomic EST information that is incorrectly associated with that gene.
Data warehousing
Microarray data was found to be more useful when compared to other similar datasets. The sheer volume of data, specialized formats (such as MIAME), and curation efforts associated with the datasets require specialized databases to store the data. A number of open-source data warehousing solutions, such as InterMine and BioMart, have been created for the specific purpose of integrating diverse biological datasets, and also support analysis.
See also
Cyanine dyes, such as Cy3 and Cy5, are commonly used fluorophores with microarrays
Full Genome Sequencing
Gene chip analysis
Microfluidics or lab-on-chip
Pathogenomics
Serial analysis of gene expression
Significance analysis of microarrays
Systems biology
References
^Maskos, U; Southern, EM (11 Apr 1992). "Oligonucleotide hybridizations on glass supports: a novel linker for oligonucleotide synthesis and hybridization properties of oligonucleotides synthesised in situ". Nucleic Acids Res. (Maskos U, Southern EM.) 20 (7): 1679–84. doi:10.1093/nar/20.7.1679. PMC 312256. PMID 1579459. //www.ncbi.nlm.nih.gov/pmc/articles/PMC312256/.
^Augenlicht LH, Kobrin D (1982). "Cloning and screening of sequences expressed in a mouse colon tumor". Cancer Research42 (3): 1088–1093. PMID 7059971. http://cancerres.aacrjournals.org/content/42/3/1088.long.
^Augenlicht et al.; Wahrman, MZ; Halsey, H; Anderson, L; Taylor, J; Lipkin, M (1987). "Expression of cloned sequences in biopsies of human colonic tissue and in colonic carcinoma cells induced to differentiate in vitro". Cancer Research47 (22): 6017–6021. PMID 3664505.
^Augenlicht et al. (1991). "Patterns of Gene Expression that Characterize the Colonic Mucosa in Patients at Genetic Risk for Colonic Cancer". Proceedings National Academy of Sciences88 (8): 3286–3289. doi:10.1073/pnas.88.8.3286.
^Schena M, Shalon D, Davis RW, Brown PO (1995). "Quantitative monitoring of gene expression patterns with a complementary DNA microarray". Science270 (5235): 467–470. doi:10.1126/science.270.5235.467. PMID 7569999.
^Lashkari DA, DeRisi JL, McCusker JH, Namath AF, Gentile C, Hwang SY, Brown PO, Davis RW (1997). "Yeast microarrays for genome wide parallel genetic and gene expression analysis". Proc Natl Acad Sci USA94 (24): 13057–13062. doi:10.1073/pnas.94.24.13057. PMC 24262. PMID 9371799. //www.ncbi.nlm.nih.gov/pmc/articles/PMC24262/.
^Adomas A, Heller G, Olson A, Osborne J, Karlsson M, Nahalkova J, Van Zyl L, Sederoff R, Stenlid J, Finlay R, Asiegbu FO (2008). "Comparative analysis of transcript abundance in Pinus sylvestris after challenge with a saprotrophic, pathogenic or mutualistic fungus". Tree Physiol.28 (6): 885–897. PMID 18381269.
^Pollack JR, Perou CM, Alizadeh AA, Eisen MB, Pergamenschikov A, Williams CF, Jeffrey SS, Botstein D, Brown PO (1999). "Genome-wide analysis of DNA copy-number changes using cDNA microarrays". Nat Genet23 (1): 41–46. doi:10.1038/14385. PMID 10471496.
^Moran G, Stokes C, Thewes S, Hube B, Coleman DC, Sullivan D (2004). "Comparative genomics using Candida albicans DNA microarrays reveals absence and divergence of virulence-associated genes in Candida dubliniensis". Microbiology150 (Pt 10): 3363–3382. doi:10.1099/mic.0.27221-0. PMID 15470115.
^Hacia JG, Fan JB, Ryder O, Jin L, Edgemon K, Ghandour G, Mayer RA, Sun B, Hsie L, Robbins CM, Brody LC, Wang D, Lander ES, Lipshutz R, Fodor SP, Collins FS (1999). "Determination of ancestral alleles for human single-nucleotide polymorphisms using high-density oligonucleotide arrays". Nat Genet22 (2): 164–167. doi:10.1038/9674. PMID 10369258.
^J Biochem Biophys Methods. 2000 Mar 16;42(3):105-10. DNA-printing: utilization of a standard inkjet printer for the transfer of nucleic acids to solid supports. Goldmann T, Gonzalez JS.
^Lausted C et al. (2004). "POSaM: a fast, flexible, open-source, inkjet oligonucleotide synthesizer and microarrayer". Genome Biology5 (8): R58. doi:10.1186/gb-2004-5-8-r58. PMC 507883. PMID 15287980. http://genomebiology.com/2004/5/8/R58.
^Bammler T, Beyer RP; Consortium, Members of the Toxicogenomics Research; Kerr, X; Jing, LX; Lapidus, S; Lasarev, DA; Paules, RS; Li, JL et al. (2005). "Standardizing global gene expression analysis between laboratories and across platforms". Nat Methods2 (5): 351–356. doi:10.1038/nmeth0605-477a. PMID 15846362.
^Nuwaysir EF, Huang W, Albert TJ, Singh J, Nuwaysir K, Pitas A, Richmond T, Gorski T, Berg JP, Ballin J, McCormick M, Norton J, Pollock T, Sumwalt T, Butcher L, Porter D, Molla M, Hall C, Blattner F, Sussman MR, Wallace RL, Cerrina F, Green RD. (2002). "Gene Expression Analysis Using Oligonucleotide Arrays Produced by Maskless Photolithography". Genome Res12 (11): 1749–1755. doi:10.1101/gr.362402. PMC 187555. PMID 12421762. //www.ncbi.nlm.nih.gov/pmc/articles/PMC187555/.
^Shalon D, Smith SJ, Brown PO (1996). "A DNA microarray system for analyzing complex DNA samples using two-color fluorescent probe hybridization". Genome Res6 (7): 639–645. doi:10.1101/gr.6.7.639. PMID 8796352.
^Tang T, François N, Glatigny A, Agier N, Mucchielli MH, Aggerbeck L, Delacroix H (2007). "Expression ratio evaluation in two-colour microarray experiments is significantly improved by correcting image misalignment". Bioinformatics23 (20): 2686–2691. doi:10.1093/bioinformatics/btm399. PMID 17698492.
^Churchill, GA (2002). "Fundamentals of experimental design for cDNA microarrays" (– Scholar search). Nature genetics supplement32: 490–5. doi:10.1038/ng1031. PMID 12454643. http://www.vmrf.org/research-websites/gcf/Forms/Churchill.pdf.[dead link]
^NCTR Center for Toxicoinformatics - MAQC Project
^Little, M.A.; Jones, N.S. (2011). "Generalized Methods and Solvers for Piecewise Constant Signals: Part I". Proc. Roy. Soc. A.. http://www.maxlittle.net/publications/pwc_filtering_arxiv.pdf.
^Ben-Gal I., Shani A., Gohr A., Grau J., Arviv S., Shmilovici A., Posch S. and Grosse I. (2005), Identification of Transcription Factor Binding Sites with Variable-order Bayesian Networks, Bioinformatics,vol. 21, no. 11, 2657-2666. Available at http://bioinformatics.oxfordjournals.org/content/21/11/2657.full.pdf?keytype=ref&ijkey=KkxNhRdTSfvtvXY
^Yuk Fai Leung and Duccio Cavalieri, Fundamentals of cDNA microarray data analysis. TRENDS in Genetics Vol.19 No.11 November 2003
^Priness I., Maimon O., Ben-Gal I. (2007). [Available at http://www.biomedcentral.com/1471-2105/8/111 "Evaluation of gene-expression clustering via mutual information distance measure"]. BMC Bioinformatics8 (1): 111. doi:10.1186/1471-2105-8-111. PMC 1858704. PMID 17397530. Available at http://www.biomedcentral.com/1471-2105/8/111.
^Wei C, Li J, Bumgarner RE. (2004). "Sample size for detecting differentially expressed genes in microarray experiments". BMC Genomics5: 87. doi:10.1186/1471-2164-5-87. PMC 533874. PMID 15533245. //www.ncbi.nlm.nih.gov/pmc/articles/PMC533874/.
^Emmert-Streib, F. and Dehmer, M. (2008). Analysis of Microarray Data A Network-Based Approach. Wiley-VCH. ISBN 3-527-31822-4.
^Wouters L, Gõhlmann HW, Bijnens L, Kass SU, Molenberghs G, Lewi PJ (2003). "Graphical exploration of gene expression data: a comparative study of three multivariate methods". Biometrics59 (4): 1131–1139. doi:10.1111/j.0006-341X.2003.00130.x. PMID 14969494.
^Jain N, Thatte J, Braciale T, Ley K, O'Connell M, Lee JK (2003). "Local-pooled-error test for identifying differentially expressed genes with a small number of replicated microarrays". Bioinformatics19 (15): 1945–1951. doi:10.1093/bioinformatics/btg264. PMID 14555628.
Glossary
An Array or slide is a collection of features spatially arranged in a two dimensional grid, arranged in columns and rows.
Block or subarray: a group of spots, typically made in one print round; several subarrays/blocks form an array.
Case/control: an experimental design paradigm especially suited to the two-colour array system, in which a condition chosen as control (such as healthy tissue or state) is compared to an altered condition (such as a diseased tissue or state).
Channel: the fluorescence output recorded in the scanner for an individual fluorophore and can even be ultraviolet.
Dye flip or Dye swap or Fluor reversal: reciprocal labelling of DNA targets with the two dyes to account for dye bias in experiments.
Scanner: an instrument used to detect and quantify the intensity of fluorescence of spots on a microarray slide, by selectively exciting fluorophores with a laser and measuring the fluorescence with a filter (optics) photomultiplier system.
Spot or feature: a small area on an array slide that contains picomoles of specific DNA samples.
For other relevant terms see:
Glossary of gene expression terms
Protocol (natural sciences)
External links
Many important links can be found at the Open Directory Project
Gene Expression at the Open Directory Project
Micro Scale Products and Services for Biochemistry and Molecular Biology at the Open Directory Project
Products and Services for Gene Expression at the Open Directory Project
Online Services for Gene Expression Analysis at the Open Directory Project
PLoS Biology Primer: Microarray Analysis
Rundown of microarray technology
ArrayMining.net - a free web-server for online microarray analysis
Association of a Polymorphism of BTN2A1 With Hypertension in Japanese Individuals.
Horibe H, Kato K, Oguri M, Yoshida T, Fujimaki T, Kawamiya T, Yokoi K, Watanabe S, Satoh K, Aoyagi Y, Tanaka M, Yoshida H, Shinkai S, Nozawa Y, Murohara T, Yamada Y.SourceDepartment of Cardiovascular Medicine, Gifu Prefectural Tajimi Hospital, Tajimi, Japan.
American journal of hypertension.Am J Hypertens.2011 Aug;24(8):924-9. doi: 10.1038/ajh.2011.74. Epub 2011 Apr 28.
BackgroundWe previously showed that the C→T polymorphism (rs6929846) in butyrophilin, subfamily 2, member A1 gene (BTN2A1) was associated with myocardial infarction in Japanese individuals. Given that hypertension is a major risk factor for myocardial infarction, the association of rs6929846 of BT
Acinetobacter baumannii and Acinetobacter genospecies 13TU and 3 bacteraemia: comparison of clinical features, prognostic factors and outcomes.
Lee YC, Huang YT, Tan CK, Kuo YW, Liao CH, Lee PI, Hsueh PR.SourceDepartments of Internal Medicine, National Taiwan University Hospital, National Taiwan University College of Medicine, Taipei, Taiwan.
The Journal of antimicrobial chemotherapy.J Antimicrob Chemother.2011 Aug;66(8):1839-46. Epub 2011 Jun 8.
Objectives To investigate the clinical impact of different genospecies of the Acinetobacter calcoaceticus-Acinetobacter baumannii complex (ACB complex; A. baumannii, Acinetobacter gen. sp. 13TU and Acinetobacter gen. sp. 3) on the severity of bacteraemia. Methods We retrospectively compared the clin
1: Oligonucleotide Array Sequence Analysis Hybridization of a nucleic acid sample to a very large set of oligonucleotide probes, which are attached to a solid support, to determine sequence or to detect variations in a gene sequence or ...
