WordNet

an atomic clock based on the energy difference between two states of the caesium nucleus in a magnetic field

PrepTutorEJDIC

=cesium
cesiumの化学記号

Wikipedia preview

出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2016/01/08 00:07:04」(JST)

wiki en

Caesium or cesium^{[note 1]} is a chemical element with symbol Cs and atomic number 55. It is a soft, silvery-gold alkali metal with a melting point of 28 °C (82 °F), which makes it one of only five elemental metals that are liquid at or near room temperature.^{[note 2]} Caesium is an alkali metal and has physical and chemical properties similar to those of rubidium and potassium. The metal is extremely reactive and pyrophoric, reacting with water even at −116 °C (−177 °F). It is the least electronegative element. It has only one stable isotope, caesium-133. Caesium is mined mostly from pollucite, while the radioisotopes, especially caesium-137, a fission product, are extracted from waste produced by nuclear reactors.

The German chemist Robert Bunsen and physicist Gustav Kirchhoff discovered caesium in 1860 by the newly developed method of flame spectroscopy. The first small-scale applications for caesium were as a "getter" in vacuum tubes and in photoelectric cells. In 1967, based on Einstein defining the speed of light as the most constant dimension in the universe, the International System of Units isolated two specific wave counts from an emission spectrum of caesium-133 to co-define the second and the meter. Since then, caesium has been widely used in highly accurate atomic clocks.

Since the 1990s, the largest application of the element has been as caesium formate for drilling fluids. It has a range of applications in the production of electricity, in electronics, and in chemistry. The radioactive isotope caesium-137 has a half-life of about 30 years and is used in medical applications, industrial gauges, and hydrology. Although the element is only mildly toxic, it is a hazardous material as a metal and its radioisotopes present a high health risk if released into the environment.

1 Characteristics
- 1.1 Physical properties
- 1.2 Chemical properties
- 1.3 Compounds
  - 1.3.1 Complexes
  - 1.3.2 Halides
  - 1.3.3 Oxides
- 1.4 Isotopes
- 1.5 Occurrence
2 Production
3 History
4 Applications
- 4.1 Petroleum exploration
- 4.2 Atomic clocks
- 4.3 Electric power and electronics
- 4.4 Centrifugation fluids
- 4.5 Chemical and medical use
- 4.6 Nuclear and isotope applications
- 4.7 Other uses
5 Health and safety hazards
6 See also
7 Notes
8 References
9 External links

Characteristics

Physical properties

High-purity caesium-133 preserved under argon

Caesium is a very soft (it has the lowest hardness of all elements, 0.2 Mohs), very ductile, pale metal, which darkens in the presence of trace amounts of oxygen.^[10]^[11]^[12] It has a melting point of 28.4 °C (83.1 °F), making it one of the few elemental metals that are liquid near room temperature. Mercury is the only elemental metal with a known melting point lower than caesium.^{[note 3]}^[14] In addition, the metal has a rather low boiling point, 641 °C (1,186 °F), the lowest of all metals other than mercury.^[15] Its compounds burn with a blue^[16]^[17] or violet^[17] colour.

Secure caesium sample for teaching

Caesium forms alloys with the other alkali metals, as well as with gold, and amalgams with mercury. At temperatures below 650 °C (1,202 °F), it does not alloy with cobalt, iron, molybdenum, nickel, platinum, tantalum or tungsten. It forms well-defined intermetallic compounds with antimony, gallium, indium and thorium, which are photosensitive.^[10] It mixes with all the other alkali metals (except lithium); the alloy with a molar distribution of 41% caesium, 47% potassium, and 12% sodium has the lowest melting point of any known metal alloy, at −78 °C (−108 °F).^[14]^[18] A few amalgams have been studied: CsHg
2 is black with a purple metallic luster, while CsHg is golden-coloured, also with a metallic luster.^[19]

Chemical properties

Play media

Addition of a small amount of caesium to cold water is explosive.

Caesium metal is highly reactive and very pyrophoric. In addition to igniting spontaneously in air, it reacts explosively with water even at low temperatures, more so than other members of the first group of the periodic table.^[10] The reaction with solid water occurs at temperatures as low as −116 °C (−177 °F).^[14] Because of its high reactivity, the metal is classified as a hazardous material. It is stored and shipped in dry saturated hydrocarbons, such as mineral oil. Similarly, it must be handled under inert gas, such as argon. However, a caesium-water explosion is often less powerful than a sodium-water explosion with a similar amount of sodium. This is because caesium explodes instantly upon contact with water, leaving little time for hydrogen to accumulate.^[20] Caesium can be stored in vacuum-sealed borosilicate glass ampoules. In quantities of more than about 100 grams (3.5 oz), caesium is shipped in hermetically sealed, stainless steel containers.^[10]

The chemistry of caesium is similar to that of other alkali metals, but is more closely similar to that of rubidium, the element above caesium in the periodic table.^[21] As expected for an alkali metal, its only common oxidation state is +1.^{[note 4]} Some small differences arise from the fact that it has a higher atomic mass and is more electropositive than other (nonradioactive) alkali metals.^[23] Caesium is the most electropositive chemical element.^{[note 5]}^[14] The caesium ion is also larger and less "hard" than those of the lighter alkali metals.

Compounds

Ball-and-stick model of the cubic coordination of Cs and Cl in CsCl

The vast majority of caesium compounds contain the element as the cation Cs+
, which binds ionically to a wide variety of anions. One noteworthy exception is provided by the caeside anion (Cs−
).^[3] Other exceptions include the several suboxides (see section on oxides below).

Returning to more normal compounds, salts of Cs⁺ are almost invariably colourless unless the anion itself is coloured. Many of the simple salts are hygroscopic, but less so than the corresponding salts of the lighter alkali metals. The phosphate,^[25] acetate, carbonate, halides, oxide, nitrate, and sulfate salts are water-soluble. Double salts are often less soluble, and the low solubility of caesium aluminium sulfate is exploited in the purification of Cs from its ores. The double salt with antimony (such as CsSbCl
4), bismuth, cadmium, copper, iron, and lead are also poorly soluble.^[10]

Caesium hydroxide (CsOH) is hygroscopic and a very strong base.^[21] It rapidly etches the surface of semiconductors such as silicon.^[26] CsOH has been previously regarded by chemists as the "strongest base", reflecting the relatively weak attraction between the large Cs⁺ ion and OH⁻;^[16] it is indeed the strongest Arrhenius base, but a number of compounds that cannot exist in aqueous solution, such as n-butyllithium and sodium amide,^[21] are more basic.

A stoichiometric mixture of caesium and gold will react to form yellow caesium auride (Cs⁺Au⁻) upon heating. The auride anion here behaves as a pseudohalogen. The compound reacts violently with water, yielding caesium hydroxide, metallic gold, and hydrogen gas; in liquid ammonia it can be reacted with a caesium-specific ion exchange resin to produce tetramethylammonium auride. The analogous platinum compound, the red caesium platinide (Cs₂Pt), contains the platinide ion that behaves as a pseudochalcogen.^[27]

Complexes

Like all metal cations, Cs⁺ forms complexes with Lewis bases in solution. Because of its large size, Cs⁺ usually adopts coordination numbers greater than six-coordination, which is typical for the lighter alkali metal cations. This trend is already apparent by the 8-coordination in CsCl, vs. the halite motif adopted by the other alkali metal chlorides. Its high coordination number and softness (tendency to form covalent bonds) are the basis of the separation of Cs⁺ from other cations, as is practiced in the remediation of nuclear wastes, where ¹³⁷Cs⁺ is separated from large amounts of nonradioactive K⁺.^[28]

Halides

Monoatomic caesium halide wires grown inside double-wall carbon nanotubes (TEM image).^[29]

Caesium fluoride (CsF) is a hygroscopic white solid that is widely used in organofluorine chemistry as a source of the fluoride anion.^[30] Caesium fluoride has the halite structure, which means that the Cs⁺ and F⁻ pack in a cubic closest packed array as do Na⁺ and Cl⁻ in sodium chloride.^[21] It is noteworthy as caesium and fluorine have the lowest and highest electronegativities respectively among all the known elements.

Caesium chloride (CsCl) crystallizes in the simple cubic crystal system. Also called the "caesium chloride structure",^[23] this structural motif is composed of a primitive cubic lattice with a two-atom basis, each with an eightfold coordination; the chloride atoms lie upon the lattice points at the edges of the cube, while the caesium atoms lie in the holes in the center of the cubes. This structure is shared with CsBr and CsI, and many other compounds that do not contain Cs. In contrast, most other alkaline halides adopt the sodium chloride (NaCl) structure.^[23] The CsCl structure is preferred because Cs⁺ has an ionic radius of 174 pm and Cl−
181 pm.^[31]

Oxides

Cs
11O

3 cluster

More so than the other alkali metals, caesium forms numerous binary compounds with oxygen. When caesium burns in air, the superoxide CsO
2 is the main product.^[32] The "normal" caesium oxide (Cs
2O) forms yellow-orange hexagonal crystals,^[33] and is the only oxide of the anti-CdCl
2 type.^[34] It vaporizes at 250 °C (482 °F), and decomposes to caesium metal and the peroxide Cs
2O
2 at temperatures above 400 °C (752 °F).^[35] Aside from the superoxide and the ozonide CsO
3,^[36]^[37] several brightly coloured suboxides have also been studied.^[38] These include Cs
7O, Cs
4O, Cs
11O
3, Cs
3O (dark-green^[39]), CsO, Cs
3O
2,^[40] as well as Cs
7O
2.^[41]^[42] The latter may be heated under vacuum to generate Cs
2O.^[34] Binary compounds with sulfur, selenium, and tellurium also exist.^[10]

Isotopes

Caesium has a total of 39 known isotopes that range in their mass number (i.e. number of nucleons in its nucleus) from 112 to 151. Several of these are synthesized from lighter elements by the slow neutron capture process (S-process) inside old stars,^[43] as well as inside supernova explosions (R-process).^[44] However, the only stable caesium isotope is ¹³³Cs, which has 78 neutrons. Although it has a large nuclear spin (7/2+), nuclear magnetic resonance studies can be done with this isotope at a resonating frequency of 11.7 MHz.^[45]

Decay of caesium-137

The radioactive ¹³⁵Cs has a very long half-life of about 2.3 million years, longest of all radioactive isotopes of caesium. ¹³⁷Cs and ¹³⁴Cs have half-lives of 30 and two years, respectively. ¹³⁷Cs decomposes to a short-lived ^137mBa by beta decay, and then to nonradioactive barium, while ¹³⁴Cs transforms into ¹³⁴Ba directly. The isotopes with mass numbers of 129, 131, 132 and 136, have half-lives between a day and two weeks, while most of the other isotopes have half-lives from a few seconds to fractions of a second. There are at least 21 metastable nuclear isomers. Other than ^134mCs (with a half-life of just under 3 hours), all are very unstable and decay with half-lives of a few minutes or less.^[46]^[47]

The isotope ¹³⁵Cs is one of the long-lived fission products of uranium which form in nuclear reactors.^[48] However, its fission product yield is reduced in most reactors because its predecessor, ¹³⁵Xe, is an extremely potent neutron poison and transmutes frequently to stable ¹³⁶Xe before it can decay to ¹³⁵Cs.^[49]^[50]

Because of its beta decay (to ^137mBa), ¹³⁷Cs is a strong emitter of gamma radiation.^[51] Its half-life makes it the principal medium-lived fission product along with ⁹⁰Sr—both are responsible for radioactivity of spent nuclear fuel after several years of cooling up to several hundred years after use.^[52] For example, ¹³⁷Cs together with ⁹⁰Sr currently generate the largest source of radioactivity generated in the area around the Chernobyl disaster.^[53] It is not feasible to dispose of ¹³⁷Cs through neutron capture (due to the low capture rate) and as a result it must be allowed to decay.^[54]

Almost all caesium produced from nuclear fission comes from beta decay of originally more neutron-rich fission products, passing through various isotopes of iodine and of xenon.^[55] Because iodine and xenon are volatile and can diffuse through nuclear fuel or air, radioactive caesium is often created far from the original site of fission.^[56] With the commencement of nuclear weapons testing around 1945, ¹³⁷Cs was released into the atmosphere and then returned to the surface of the earth as a component of radioactive fallout.^[10]

Occurrence

Pollucite, a caesium mineral

Caesium is a relatively rare element as it is estimated to average approximately 3 parts per million in the Earth's crust.^[57] This makes it the 45th most abundant of all elements and the 36th of all the metals. Nevertheless, it is more abundant than such elements as antimony, cadmium, tin and tungsten, and two orders of magnitude more abundant than mercury or silver, but 3.3% as abundant as rubidium—with which it is so closely associated, chemically.^[10]

Due to its large ionic radius, caesium is one of the "incompatible elements".^[58] During magma crystallization, caesium is concentrated in the liquid phase and crystallizes last. Therefore, the largest deposits of caesium are zone pegmatite ore bodies formed by this enrichment process. Because caesium does not substitute for potassium as readily as does rubidium, the alkali evaporite minerals sylvite (KCl) and carnallite (KMgCl
3·6H
2O) may contain only 0.002% caesium. Consequently, Cs is found in few minerals. Percentage amounts of caesium may be found in beryl (Be
3Al
2(SiO
3)
6) and avogadrite ((K,Cs)BF
4), up to 15 wt% Cs₂O in the closely related mineral pezzottaite (Cs(Be₂Li)Al₂Si₆O₁₈), up to 8.4 wt% Cs₂O in the rare mineral londonite ((Cs,K)Al
4Be
4(B,Be)
12O
28), and less in the more widespread rhodizite.^[10] The only economically important source mineral for caesium is pollucite Cs(AlSi
2O
6), which is found in a few places around the world in zoned pegmatites, and is associated with the more commercially important lithium minerals lepidolite and petalite. Within the pegmatites, the large grain size and the strong separation of the minerals create high-grade ore for mining.^[59]

One of the world's most significant and richest sources of the metal is the Tanco Mine at Bernic Lake in Manitoba, Canada. The deposits there are estimated to contain 350,000 metric tons of pollucite ore, which represent more than two-thirds of the world's reserve base.^[59]^[60] Although the stoichiometric content of caesium in pollucite is 42.6%, pure pollucite samples from this deposit contain only about 34% caesium, while the average content is 24 wt%.^[60] Commercial pollucite contains over 19% caesium.^[61] The Bikita pegmatite deposit in Zimbabwe is mined for its petalite, but it also contains a significant amount of pollucite. Notable amounts of pollucite are also mined in the Karibib Desert, Namibia.^[60] At the present rate of world mine production of 5 to 10 metric tons per year, reserves will last for thousands of years.^[10]

Production

The mining of pollucite ore is a selective process and is conducted on a small scale in comparison with most metal mining operations. The ore is crushed, hand-sorted, but not usually concentrated, and then ground. Caesium is then extracted from pollucite mainly by three methods: acid digestion, alkaline decomposition, and direct reduction.^[10]^[62]

In the acid digestion, the silicate pollucite rock is dissolved with strong acids, such as hydrochloric (HCl), sulfuric (H
2SO
4), hydrobromic (HBr), or hydrofluoric (HF) acids. With hydrochloric acid, a mixture of soluble chlorides is produced, and the insoluble chloride double salts of caesium are precipitated as caesium antimony chloride (Cs
4SbCl
7), caesium iodine chloride (Cs
2ICl), or caesium hexachlorocerate (Cs
2(CeCl
6)). After separation, the pure precipitated double salt is decomposed, and pure CsCl is obtained after evaporating the water. The method using sulfuric acid yields the insoluble double salt directly as caesium alum (CsAl(SO
4)
2·12H
2O). The aluminium sulfate in it is converted to the insoluble aluminium oxide by roasting the alum with carbon, and the resulting product is leached with water to yield a Cs
2SO
4 solution.^[10]

The roasting of pollucite with calcium carbonate and calcium chloride yields insoluble calcium silicates and soluble caesium chloride. Leaching with water or dilute ammonia (NH
4OH) yields then a dilute chloride (CsCl) solution. This solution can be evaporated to produce caesium chloride or transformed into caesium alum or caesium carbonate. Albeit not commercially feasible, direct reduction of the ore with potassium, sodium or calcium in vacuum can produce caesium metal directly.^[10]

Most of the mined caesium (as salts) is directly converted into caesium formate (HCOO⁻Cs⁺) for applications such as oil drilling. To supply the developing market, Cabot Corporation built a production plant in 1997 at the Tanco mine near Bernic Lake in Manitoba, with a capacity of 12,000 barrels (1,900 m³) per year of caesium formate solution.^[63] The primary smaller-scale commercial compounds of caesium are caesium chloride and its nitrate.^[64]

Alternatively, caesium metal may be obtained from the purified compounds derived from the ore. Caesium chloride, and the other caesium halides, as well, can be reduced at 700 to 800 °C (1,292 to 1,472 °F) with calcium or barium, followed by distillation of the caesium metal. In the same way, the aluminate, carbonate, or hydroxide may be reduced by magnesium.^[10] The metal can also be isolated by electrolysis of fused caesium cyanide (CsCN). Exceptionally pure and gas-free caesium can be made by the thermal decomposition at 390 °C (734 °F) of caesium azide CsN
3, which is produced from aqueous caesium sulfate and barium azide.^[62] In vacuum applications, caesium dichromate can be reacted with zirconium forming pure caesium metal without other gaseous products.^[64]

Cs
2Cr
2O
7 + 2 Zr → 2 Cs + 2 ZrO
2+ Cr
2O
3

The price of 99.8% pure caesium (metal basis) in 2009 was about US$10 per gram ($280 per ounce), but its compounds are significantly cheaper.^[60]

History

Gustav Kirchhoff (left) and Robert Bunsen (center) discovered caesium spectroscopically.

In 1860, Robert Bunsen and Gustav Kirchhoff discovered caesium in the mineral water from Dürkheim, Germany. Due to the bright blue lines in its emission spectrum, they chose a name derived from the Latin word caesius, meaning sky-blue.^{[note 6]}^[65]^[66]^[67] Caesium was the first element to be discovered spectroscopically, only one year after the invention of the spectroscope by Bunsen and Kirchhoff.^[14]

To obtain a pure sample of caesium, 44,000 liters (9,700 imp gal; 12,000 U.S. gal) of mineral water had to be evaporated to yield 240 kilograms (530 lb) of concentrated salt solution. The alkaline earth metals were precipitated either as sulfates or oxalates, leaving the alkali metal in the solution. After conversion to the nitrates and extraction with ethanol, a sodium-free mixture was obtained. From this mixture, the lithium was precipitated by ammonium carbonate. Potassium, rubidium and caesium form insoluble salts with chloroplatinic acid, but these salts show a slight difference in solubility in hot water. Therefore, the less-soluble caesium and rubidium hexachloroplatinate ((Cs,Rb)₂PtCl₆) could be obtained by fractional crystallization. After reduction of the hexachloroplatinate with hydrogen, caesium and rubidium could be separated by the difference in solubility of their carbonates in alcohol. The process yielded 9.2 grams (0.32 oz) of rubidium chloride and 7.3 grams (0.26 oz) of caesium chloride from the initial 44,000 liters of mineral water.^[66]

The two scientists used the caesium chloride thus obtained to estimate the atomic weight of the new element at 123.35 (compared to the currently accepted one of 132.9).^[66] They tried to generate elemental caesium by electrolysis of molten caesium chloride, but instead of a metal, they obtained a blue homogeneous substance which "neither under the naked eye nor under the microscope" showed the slightest trace of metallic substance"; as a result, they assigned it as a subchloride (Cs
2Cl). In reality, the product was probably a colloidal mixture of the metal and caesium chloride.^[68] The electrolysis of the aqueous solution of chloride with a mercury anode produced a caesium amalgam which readily decomposed under the aqueous conditions.^[66] The pure metal was eventually isolated by the German chemist Carl Setterberg while working on his doctorate with Kekulé and Bunsen.^[67] In 1882, he produced caesium metal by electrolysing caesium cyanide, and thus avoiding the problems with the chloride.^[69]

Historically, the most important use for caesium has been in research and development, primarily in chemical and electrical fields. Very few applications existed for caesium until the 1920s, when it came to be used in radio vacuum tubes. It had two functions; as a getter, it removed excess oxygen after manufacture, and as a coating on the heated cathode, it increased its electrical conductivity. Caesium did not become recognized as a high-performance industrial metal until the 1950s.^[70] Applications of nonradioactive caesium included photoelectric cells, photomultiplier tubes, optical components of infrared spectrophotometers, catalysts for several organic reactions, crystals for scintillation counters, and in magnetohydrodynamic power generators.^[10] Caesium also was, and still is, used as a source of positive ions in secondary ion mass spectrometry (SIMS).

Since 1967, the International System of Measurements has based its unit of time, the second, on the properties of caesium. The International System of Units (SI) defines the second as the duration of 9,192,631,770 cycles at the microwave frequency of the spectral line corresponding to the transition between two hyperfine energy levels of the ground state of caesium-133.^[71] The 13th General Conference on Weights and Measures of 1967 defined a second as: "the duration of 9,192,631,770 cycles of microwave light absorbed or emitted by the hyperfine transition of caesium-133 atoms in their ground state undisturbed by external fields".

Applications

Petroleum exploration

The largest current end-use of nonradioactive caesium is in caesium formate-based drilling fluids for the extractive oil industry.^[10] Aqueous solutions of caesium formate (HCOO⁻Cs⁺)—made by reacting caesium hydroxide with formic acid—were developed in the mid-1990s for use as oil well drilling and completion fluids. The function of a drilling fluid is to lubricate drill bits, to bring rock cuttings to the surface, and to maintain pressure on the formation during drilling of the well. Completion fluids assist the emplacement of control hardware after drilling but prior to production by maintaining the pressure.^[10]

The high density of the caesium formate brine (up to 2.3 g·cm⁻³, or 19.2 pounds per gallon),^[72] coupled with the relatively benign nature of most caesium compounds, reduces the requirement for toxic high-density suspended solids in the drilling fluid—a significant technological, engineering and environmental advantage. Unlike the components of many other heavy liquids, caesium formate is relatively environment-friendly.^[72] The caesium formate brine can be blended with potassium and sodium formates to decrease the density of the fluids down to that of water (1.0 g·cm⁻³, or 8.3 pounds per gallon). Furthermore, it is biodegradable and reclaimable, and may be recycled, which is important in view of its high cost (about $4,000 per barrel in 2001).^[73] Alkali formates are safe to handle and do not damage the producing formation or downhole metals as corrosive alternative, high-density brines (such as zinc bromide ZnBr
2 solutions) sometimes do; they also require less cleanup and reduce disposal costs.^[10]

Atomic clocks

Atomic clock ensemble at the U.S. Naval Observatory

FOCS-1, a continuous cold caesium fountain atomic clock in Switzerland, started operating in 2004 at an uncertainty of one second in 30 million years

Caesium-based atomic clocks observe electromagnetic transitions in the hyperfine structure of caesium-133 atoms and use it as a reference point. The first accurate caesium clock was built by Louis Essen in 1955 at the National Physical Laboratory in the UK.^[74] They have been improved repeatedly over the past half-century, and form the basis for standards-compliant time and frequency measurements, and have been regarded as "the most accurate realization of a unit that mankind has yet achieved."^[71] These clocks measure frequency with an error of 2 to 3 parts in 10¹⁴, which would correspond to a time measurement accuracy of 2 nanoseconds per day, or one second in 1.4 million years. The latest versions are accurate to better than 1 part in 10¹⁵, which means they would be off by about 1 second in 20 million years,.^[10] Caesium clocks are also used in networks that oversee the timing of cell phone transmissions and the information flow on the Internet.^[75]

Electric power and electronics

Caesium vapor thermionic generators are low-power devices that convert heat energy to electrical energy. In the two-electrode vacuum tube converter, it neutralizes the space charge that builds up near the cathode, and in doing so, it enhances the current flow.^[76]

Caesium is also important for its photoemissive properties by which light energy is converted to electron flow. It is used in photoelectric cells because caesium-based cathodes, such as the intermetallic compound K
2CsSb, have low threshold voltage for emission of electrons.^[77] The range of photoemissive devices using caesium include optical character recognition devices, photomultiplier tubes, and video camera tubes.^[78]^[79] Nevertheless, germanium, rubidium, selenium, silicon, tellurium, and several other elements can substitute caesium in photosensitive materials.^[10]

Caesium iodide (CsI), bromide (CsBr) and caesium fluoride (CsF) crystals are employed for scintillators in scintillation counters widely used in mineral exploration and particle physics research, as they are well-suited for the detection of gamma and X-ray radiation. Caesium, being a heavy element, provides good stopping power, contributing to better detectivity. Caesium compounds may also provide a faster response (CsF) and be less hygroscopic (CsI).

Caesium vapor is used in many common magnetometers.^[80] The element is also used as an internal standard in spectrophotometry.^[81] Like other alkali metals, caesium has a great affinity for oxygen and is used as a "getter" in vacuum tubes.^[82] Other uses of the metal include high-energy lasers, vapor glow lamps, and vapor rectifiers.^[10]

Centrifugation fluids

Because of their high density, solutions of caesium chloride, caesium sulfate, and caesium trifluoroacetate (Cs(O
2CCF
3)) are commonly used in molecular biology for density gradient ultracentrifugation.^[83] This technology is primarily applied to the isolation of viral particles, subcellular organelles and fractions, and nucleic acids from biological samples.^[84]

Chemical and medical use

Caesium chloride powder

There are relatively few chemical applications for caesium.^[85] Doping with caesium compounds is used to enhance the effectiveness of several metal-ion catalysts used in the production of chemicals, such as acrylic acid, anthraquinone, ethylene oxide, methanol, phthalic anhydride, styrene, methyl methacrylate monomers, and various olefins. It is also used in the catalytic conversion of sulfur dioxide into sulfur trioxide in the production of sulfuric acid.^[10]

Caesium fluoride enjoys niche use in organic chemistry as a base,^[21] or as an anhydrous source of fluoride ion.^[86] Caesium salts sometimes replace potassium or sodium salts in organic synthesis, such as cyclization, esterification, and polymerization. It has also been used in thermoluminescent radiation dosimetry (TLD): When exposed to radiation, it acquires crystal defects that, when heated, revert with emission of light proportionate to the received dose. Thus, measuring the light pulse with a photomultiplier tube can allow the accumulated radiation dose to be quantified.

Nuclear and isotope applications

Caesium-137 is a very common radioisotope used as a gamma-emitter in industrial applications. Its advantages include a half-life of roughly 30 years, its availability from the nuclear fuel cycle, and having ¹³⁷Ba as a stable end product. The high water solubility is a disadvantage which makes it incompatible with large pool irradiators for food and medical supplies.^[87] It has been used in agriculture, cancer treatment, and the sterilization of food, sewage sludge, and surgical equipment.^[10]^[88] Radioactive isotopes of caesium in radiation devices were used in the medical field to treat certain types of cancer,^[89] but emergence of better alternatives and the use of water-soluble caesium chloride in the sources, which could create wide-ranging contamination, gradually put some of these caesium sources out of use.^[90]^[91] Caesium-137 has been employed in a variety of industrial measurement gauges, including moisture, density, leveling, and thickness gauges.^[92] It has also been used in well logging devices for measuring the electron density of the rock formations, which is analogous to the bulk density of the formations.^[93]

Isotope 137 has also been used in hydrologic studies analogous to those using tritium. It is a daughter product of nuclear fission reactions. With the commencement of nuclear testing around 1945, and continuing through the mid-1980s, caesium-137 was released into the atmosphere, where it is absorbed readily into solution. Known year-to-year variation within that period allows correlation with soil and sediment layers. Caesium-134, and to a lesser extent caesium-135, have also been used in hydrology as a measure of caesium output by the nuclear power industry. While they are less prevalent than either caesium-133 or caesium-137, these isotopes have the advantage of being produced solely from anthropogenic sources.^[94]

Other uses

Schematics of an electrostatic ion thruster which was initially developed for use with caesium or mercury

Caesium and mercury were used as a propellant in early ion engines designed for spacecraft propulsion on very long interplanetary or extraplanetary missions. The ionization method was to strip the outer electron from the propellant upon contact with a tungsten electrode that had voltage applied. Concerns about the corrosive action of caesium on spacecraft components have pushed development in the direction of the use of inert gas propellants, such as xenon; this is easier to handle in ground-based tests and has less potential to interfere with the spacecraft.^[10] Eventually, xenon was used in the experimental spacecraft Deep Space 1 launched in 1998.^[95]^[96] Nevertheless, Field Emission Electric Propulsion thrusters which use a simple system of accelerating liquid metal ions such as of caesium to create thrust have been built.^[97]

Caesium nitrate is used as an oxidizer and pyrotechnic colorant to burn silicon in infrared flares,^[98] such as the LUU-19 flare,^[99] because it emits much of its light in the near infrared spectrum.^[100] Caesium has been used to reduce the radar signature of exhaust plumes in the SR-71 Blackbird military aircraft.^[101] Caesium, along with rubidium, has been added as a carbonate to glass because it reduces electrical conductivity and improves stability and durability of fiber optics and night vision devices. Caesium fluoride or caesium aluminium fluoride are used in fluxes formulated for the brazing of aluminium alloys that contain magnesium.^[10]

Magnetohydrodynamic (MHD) power-generating systems were researched, but failed to gain widespread acceptance.^[102] Caesium metal has also been considered as the working fluid in high-temperature Rankine cycle turboelectric generators.^[103] Caesium salts have been evaluated as antishock reagents to be used following the administration of arsenical drugs. Because of their effect on heart rhythms, however, they are less likely to be used than potassium or rubidium salts. They have also been used to treat epilepsy.^[10]

Health and safety hazards

The portion of the total radiation dose (in air) contributed by each isotope versus time after the Chernobyl disaster depicting caesium-137 becoming the largest source of radiation about 200 days after the accident.^[104]

Nonradioactive caesium compounds are only mildly toxic. Exposure to large amounts can cause hyperirritability and spasms, due to the chemical similarity of caesium to potassium, but such amounts would not ordinarily be encountered in natural sources and nonradioactive caesium is not a significant environmental hazard.^[105] The median lethal dose (LD₅₀) value for caesium chloride in mice is 2.3 g per kilogram, which is comparable to the LD₅₀ values of potassium chloride and sodium chloride.^[106] The principal use of nonradioactive caesium, as caesium formate in petroleum drilling fluids, takes advantage of its low toxicity compared to less costly alternatives.^[72]

Caesium metal is one of the most reactive elements and is highly explosive when it comes in contact with water. The hydrogen gas produced by the reaction is heated by the thermal energy released at the same time, causing ignition and a violent explosion. This can occur with other alkali metals, but caesium is so potent that this explosive reaction can even be triggered by cold water.^[10] The autoignition temperature of caesium is also −116 °C, so it is highly pyrophoric, and ignites explosively in air to form caesium hydroxide and various oxides. Caesium hydroxide is a very strong base, and will rapidly corrode glass.^[15]

The isotopes 134 and 137 are present in the biosphere in small amounts from human activities and represent a radioactivity burden which varies depending on location. Radiocaesium does not accumulate in the body as effectively as many other fission products (such as radioiodine and radiostrontium). About 10% of absorbed radiocaesium washes out of the body relatively quickly in sweat and urine. The remaining 90% has a biological half-life between 50 and 150 days.^[107] Radiocaesium follows potassium and tends to accumulate in plant tissues, including fruits and vegetables.^[108]^[109]^[110] Plants absorb caesium differently, some do not absorb it much, and some take it large amounts, sometimes displaying great resistance to it. It is also well-documented that mushrooms from contaminated forests accumulate radiocaesium (caesium-137) in their fungal sporocarps.^[111] Accumulation of caesium-137 in lakes has been a high concern after the Chernobyl disaster.^[112]^[113] Experiments with dogs showed that a single dose of 3.8 millicuries (140 MBq, 4.1 μg of caesium-137) per kilogram is lethal within three weeks;^[114] smaller amounts may cause infertility and cancer.^[115] The International Atomic Energy Agency and other sources have warned that radioactive materials, such as caesium-137, could be used in radiological dispersion devices, or "dirty bombs".^[116]

Notes

^ Caesium is the spelling recommended by the International Union of Pure and Applied Chemistry (IUPAC).^[6] The American Chemical Society (ACS) has used the spelling cesium since 1921,^[7]^[8] following Webster's New International Dictionary. The element was named after the Latin word caesius, meaning "bluish grey".^[9] In medieval and early modern writings caesius was spelled with the ligature æ as cæsius; hence, an alternative but now old-fashioned orthography is cæsium. More spelling explanation at ae/oe vs e.
^ Along with rubidium (39 °C [102 °F]), francium (estimated at 27 °C [81 °F]), mercury (−39 °C [−38 °F]), and gallium (30 °C [86 °F]); bromine is also liquid at room temperature (melting at −7.2 °C, 19 °F), but it is a halogen, not a metal.
^ The radioactive element francium may also have a lower melting point, but its radioactivity prevents enough of it from being isolated for direct testing.^[13]
^ It differs from this value in caesides, which contain the Cs⁻ anion and thus have caesium in the −1 oxidation state.^[3] Additionally, 2013 calculations by Mao-sheng Miao indicate that under conditions of extreme pressure (greater than 30 GPa), the inner 5p electrons could form chemical bonds, where caesium would behave as the seventh 5p element. This discovery indicates that higher caesium fluorides with caesium in oxidation states from +2 to +6 could exist under such conditions.^[22]
^ Francium's electropositivity has not been experimentally measured due to its high radioactivity. Measurements of the first ionization energy of francium suggest that its relativistic effects may lower its reactivity and raise its electronegativity above that expected from periodic trends.^[24]
^ Bunsen quotes Aulus Gellius Noctes Atticae II, 26 by Nigidius Figulus: Nostris autem veteribus caesia dicts est quae Graecis, ut Nigidus ait, de colore coeli quasi coelia.

References

^ Standard Atomic Weights 2013. Commission on Isotopic Abundances and Atomic Weights
^ Haynes, William M., ed. (2011). CRC Handbook of Chemistry and Physics (92nd ed.). Boca Raton, FL: CRC Press. p. 4.121. ISBN 1439855110.
^ ^a ^b ^c Dye, J. L. (1979). "Compounds of Alkali Metal Anions". Angewandte Chemie International Edition 18 (8): 587–598. doi:10.1002/anie.197905871.
^ "Magnetic susceptibility of the elements and inorganic compounds". Handbook of Chemistry and Physics (PDF) (87th ed.). CRC press. ISBN 0-8493-0487-3. Retrieved 2010-09-26.
^ "NIST Radionuclide Half-Life Measurements". NIST. Retrieved 2011-03-13.
^ International Union of Pure and Applied Chemistry (2005). Nomenclature of Inorganic Chemistry (IUPAC Recommendations 2005). Cambridge (UK): RSC–IUPAC. ISBN 0-85404-438-8. pp. 248–49. Electronic version..
^ Coghill, Anne M.; Garson, Lorrin R., eds. (2006). The ACS Style Guide: Effective Communication of Scientific Information (3rd ed.). Washington, D.C.: American Chemical Society. p. 127. ISBN 0-8412-3999-1.
^ Coplen, T. B.; Peiser, H. S. (1998). "History of the recommended atomic-weight values from 1882 to 1997: a comparison of differences from current values to the estimated uncertainties of earlier values" (PDF). Pure Appl. Chem. 70 (1): 237–257. doi:10.1351/pac199870010237.
^ OED entry for "caesium". Second edition, 1989; online version June 2012. Retrieved 07 September 2012. Earlier version first published in New English Dictionary, 1888.
^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o ^p ^q ^r ^s ^t ^u ^v ^w ^x ^y ^z ^aa Butterman, William C.; Brooks, William E.; Reese, Jr., Robert G. (2004). "Mineral Commodity Profile: Cesium" (PDF). United States Geological Survey. Retrieved 2009-12-27.
^ Heiserman, David L. (1992). Exploring Chemical Elements and their Compounds. McGraw-Hill. pp. 201–203. ISBN 0-8306-3015-5.
^ Addison, C. C. (1984). The Chemistry of the Liquid Alkali Metals. Wiley. ISBN 0-471-90508-9. Retrieved 2012-09-28.
^ "Francium". Periodic.lanl.gov. Retrieved 2010-02-23.
^ ^a ^b ^c ^d ^e Kaner, Richard (2003). "C&EN: It's Elemental: The Periodic Table – Cesium". American Chemical Society. Retrieved 2010-02-25.
^ ^a ^b "Chemical Data – Caesium – Cs". Royal Society of Chemistry. Retrieved 2010-09-27.
^ ^a ^b Lynch, Charles T. (1974). CRC Handbook of Materials Science. CRC Press. p. 13. ISBN 978-0-8493-2321-8.
^ ^a ^b Clark, Jim (2005). "Flame Tests". chemguide. Retrieved 2012-01-29.
^ Taova, T. M.; et al. (June 22, 2003). "Density of melts of alkali metals and their Na-K-Cs and Na-K-Rb ternary systems" (PDF). Fifteenth symposium on thermophysical properties, Boulder, Colorado, USA. Retrieved 2010-09-26.
^ Deiseroth, H. J. (1997). "Alkali metal amalgams, a group of unusual alloys". Progress in Solid State Chemistry 25 (1–2): 73–123. doi:10.1016/S0079-6786(97)81004-7.
^ Gray, Theodore (2012) The Elements, Black Dog & Leventhal Publishers, p. 131, ISBN 1-57912-895-5.
^ ^a ^b ^c ^d ^e Greenwood, N.N.; Earnshaw, A. (1984). Chemistry of the Elements. Oxford, UK: Pergamon Press. ISBN 0-08-022057-6.
^ Moskowitz, Clara. "A Basic Rule of Chemistry Can Be Broken, Calculations Show". Scientific American. Retrieved 2013-11-22.
^ ^a ^b ^c Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1985). "Vergleichende Übersicht über die Gruppe der Alkalimetalle". Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 953–955. ISBN 3-11-007511-3.
^ Andreev, S. V.; Letokhov, V. S.; Mishin, V. I. (1987). "Laser resonance photoionization spectroscopy of Rydberg levels in Fr". Physical Review Letters 59 (12): 1274–76. Bibcode:1987PhRvL..59.1274A. doi:10.1103/PhysRevLett.59.1274. PMID 10035190.
^ Hogan, C. M. (2011). Phosphate at the Wayback Machine (archived October 25, 2012) in Encyclopedia of Earth. Jorgensen, A. and Cleveland, C.J. (eds.). National Council for Science and the Environment. Washington DC
^ Köhler, Michael J. (1999). Etching in microsystem technology. Wiley-VCH. p. 90. ISBN 3-527-29561-5.
^ Jansen, Martin (2005-11-30). "Effects of relativistic motion of electrons on the chemistry of gold and platinum". Solid State Sciences 7 (12): 1464–1474. Bibcode:2005SSSci...7.1464J. doi:10.1016/j.solidstatesciences.2005.06.015.
^ Moyer, Bruce A.; Birdwell, Joseph F.; Bonnesen, Peter V.; Delmau, Laetitia H. (2005). "Use of Macrocycles in Nuclear-Waste Cleanup: A Realworld Application of a Calixcrown in Cesium Separation Technology". Macrocyclic Chemistry: 383–405. doi:10.1007/1-4020-3687-6_24. ISBN 1-4020-3364-8. .
^ Senga, Ryosuke; Suenaga, Kazu (2015). "Single-atom electron energy loss spectroscopy of light elements". Nature Communications 6: 7943. doi:10.1038/ncomms8943. PMC 4532884. PMID 26228378.
^ Evans, F. W.; Litt, M. H.; Weidler-Kubanek, A. M.; Avonda, F. P. (1968). "Reactions Catalyzed by Potassium Fluoride. 111. The Knoevenagel Reaction". Journal of Organic Chemistry 33 (5): 1837–1839. doi:10.1021/jo01269a028.
^ Wells, A.F. (1984). Structural Inorganic Chemistry (5th ed.). Oxford Science Publications. ISBN 0-19-855370-6.
^ Cotton, F. Albert; Wilkinson, G. (1962). Advanced Inorganic Chemistry. John Wiley & Sons, Inc. p. 318. ISBN 0-471-84997-9.
^ Lide, David R., ed. (2006). CRC Handbook of Chemistry and Physics (87th ed.). Boca Raton, FL: CRC Press. pp. 451, 514. ISBN 0-8493-0487-3.
^ ^a ^b Tsai, Khi-Ruey; Harris, P. M.; Lassettre, E. N. (1956). "The Crystal Structure of Cesium Monoxide". Journal of Physical Chemistry 60 (3): 338–344. doi:10.1021/j150537a022.
^ "Information Bridge: DOE Scientific and Technical Information" (PDF). Office of Scientific and Technical Information — U.S. Department of Energy. 2009-11-23. Retrieved 2010-02-15.
^ Vol'nov, I. I.; Matveev, V. V. (1963). "Synthesis of cesium ozonide through cesium superoxide". Bulletin of the Academy of Sciences, USSR Division of Chemical Science 12 (6): 1040–1043. doi:10.1007/BF00845494.
^ Tokareva, S. A. (1971). "Alkali and Alkaline Earth Metal Ozonides". Russian Chemical Reviews 40 (2): 165–174. Bibcode:1971RuCRv..40..165T. doi:10.1070/RC1971v040n02ABEH001903.
^ Simon, A. (1997). "Group 1 and 2 Suboxides and Subnitrides — Metals with Atomic Size Holes and Tunnels". Coordination Chemistry Reviews 163: 253–270. doi:10.1016/S0010-8545(97)00013-1.
^ Tsai, Khi-Ruey; Harris, P. M.; Lassettre, E. N. (1956). "The Crystal Structure of Tricesium Monoxide". Journal of Physical Chemistry 60 (3): 345–347. doi:10.1021/j150537a023.
^ Okamoto, H. (2009). "Cs-O (Cesium-Oxygen)". Journal of Phase Equilibria and Diffusion 31: 86–87. doi:10.1007/s11669-009-9636-5.
^ Band, A.; Albu-Yaron, A.; Livneh, T.; Cohen, H.; Feldman, Y.; Shimon, L.; Popovitz-Biro, R.; Lyahovitskaya, V.; Tenne, R. (2004). "Characterization of Oxides of Cesium". The Journal of Physical Chemistry B 108 (33): 12360–12367. doi:10.1021/jp036432o.
^ Brauer, G. (1947). "Untersuchungen ber das System Csium-Sauerstoff". Zeitschrift fr anorganische Chemie 255: 101–124. doi:10.1002/zaac.19472550110.
^ Busso, M.; Gallino, R.; Wasserburg, G. J. (1999). "Nucleosynthesis in Asymptotic Giant Branch Stars: Relevance for Galactic Enrichment and Solar System Formation" (PDF). Annula Review of Astronomy and Astrophysics 37: 239–309. Bibcode:1999ARA&A..37..239B. doi:10.1146/annurev.astro.37.1.239. Retrieved 2010-02-20.
^ Arnett, David (1996). Supernovae and Nucleosynthesis: An Investigation of the History of Matter, from the Big Bang to the Present. Princeton University Press. p. 527. ISBN 0-691-01147-8.
^ Goff, C; Matchette, Michael A.; Shabestary, Nahid; Khazaeli, Sadegh (1996). "Complexation of caesium and rubidium cations with crown ethers in N,N-dimethylformamide". Polyhedron 15 (21): 3897–3903. doi:10.1016/0277-5387(96)00018-6.
^ Brown, F.; Hall, G.R.; Walter, A.J. (1955). "The half-life of Cs137". Journal of Inorganic and Nuclear Chemistry 1 (4–5): 241–247. doi:10.1016/0022-1902(55)80027-9.
^ Sonzogni, Alejandro. "Interactive Chart of Nuclides". National Nuclear Data Center: Brookhaven National Laboratory. Retrieved 2008-06-06.
^ Ohki, Shigeo; Takaki, Naoyuki (14–16 October 2002). Transmutation of Cesium-135 with Fast Reactors (PDF). Seventh Information Exchange Meeting on Actinide and Fission Product Partitioning and Transmutation. Jeju, Korea. Retrieved 2010-09-26.
^ "20 Xenon: A Fission Product Poison". CANDU Fundamentals (PDF) (Report). CANDU Owners Group Inc. Retrieved 2010-09-15.
^ Taylor, V. F.; Evans, R. D.; Cornett, R. J. (2008). "Preliminary evaluation of ¹³⁵Cs/¹³⁷Cs as a forensic tool for identifying source of radioactive contamination". Journal of Environmental Radioactivity 99 (1): 109–118. doi:10.1016/j.jenvrad.2007.07.006. PMID 17869392.
^ "Cesium | Radiation Protection". U.S. Environmental Protection Agency. 2006-06-28. Retrieved 2010-02-15.
^ Zerriffi, Hisham (2000-05-24). IEER Report: Transmutation – Nuclear Alchemy Gamble (Report). Institute for Energy and Environmental Research. Retrieved 2010-02-15.
^ Chernobyl's Legacy: Health, Environmental and Socia-Economic Impacts and Recommendations to the Governments of Belarus, Russian Federation and Ukraine (PDF) (Report). International Atomic Energy Agency. Retrieved 2010-02-18.
^ Kase, Takeshi; Konashi, Kenji; Takahashi, Hiroshi; Hirao, Yasuo (1993). "Transmutation of Cesium-137 Using Proton Accelerator". Journal of Nuclear Science and Technology 30 (9): 911–918. doi:10.3327/jnst.30.911.
^ Knief, Ronald Allen (1992). "Fission Fragments". Nuclear engineering: theory and technology of commercial nuclear power. Taylor & Francis. p. 42. ISBN 978-1-56032-088-3.
^ Ishiwatari, N.; Nagai, H. "Release of xenon-137 and iodine-137 from UO2 pellet by pulse neutron irradiation at NSRR". Nippon Genshiryoku Gakkaishi 23 (11): 843–850. OSTI 5714707.
^ Turekian, K.K.; Wedepohl, K. H. (1961). "Distribution of the elements in some major units of the Earth's crust". Geological Society of America Bulletin 72 (2): 175–192. Bibcode:1961GSAB...72..175T. doi:10.1130/0016-7606(1961)72[175:DOTEIS]2.0.CO;2. ISSN 0016-7606.
^ Rowland, Simon (1998-07-04). "Cesium as a Raw Material: Occurrence and Uses". Artemis Society International. Retrieved 2010-02-15.
^ ^a ^b Černý, Petr; Simpson, F. M. (1978). "The Tanco Pegmatite at Bernic Lake, Manitoba: X. Pollucite" (PDF). Canadian Mineralogist 16: 325–333. Retrieved 2010-09-26.
^ ^a ^b ^c ^d Polyak, Désirée E. "Cesium" (PDF). U.S. Geological Survey. Retrieved 2009-10-17.
^ Norton, J. J. (1973). "Lithium, cesium, and rubidium—The rare alkali metals". In Brobst, D. A.; Pratt, W. P. United States mineral resources. Paper 820. U.S. Geological Survey Professional. pp. 365–378. Retrieved 2010-09-26.
^ ^a ^b Burt, R. O. (1993). "Caesium and cesium compounds". Kirk-Othmer encyclopedia of chemical technology 5 (4th ed.). New York: John Wiley & Sons, Inc. pp. 749–764. ISBN 978-0-471-48494-3.
^ Benton, William; Turner, Jim (2000). "Cesium formate fluid succeeds in North Sea HPHT field trials" (PDF). Drilling Contractor (May/June): 38–41. Retrieved 2010-09-26.
^ ^a ^b Eagleson, Mary, ed. (1994). Concise encyclopedia chemistry. Eagleson, Mary. Berlin: de Gruyter. p. 198. ISBN 978-3-11-011451-5.
^ Oxford English Dictionary, 2nd Edition
^ ^a ^b ^c ^d Kirchhoff, G.; Bunsen, R. (1861). "Chemische Analyse durch Spectralbeobachtungen". Annalen der Physik und Chemie 189 (7): 337–381. Bibcode:1861AnP...189..337K. doi:10.1002/andp.18611890702.
^ ^a ^b Weeks, Mary Elvira (1932). "The discovery of the elements. XIII. Some spectroscopic discoveries". Journal of Chemical Education 9 (8): 1413–1434. Bibcode:1932JChEd...9.1413W. doi:10.1021/ed009p1413.
^ Zsigmondy, Richard (2007). Colloids and the Ultra Microscope. Read books. p. 69. ISBN 978-1-4067-5938-9.
^ Setterberg, Carl (1882). "Ueber die Darstellung von Rubidium- und Cäsiumverbindungen und über die Gewinnung der Metalle selbst". Justus Liebig's Annalen der Chemie 211: 100–116. doi:10.1002/jlac.18822110105.
^ Strod, A.J. (1957). "Cesium—A new industrial metal". American Ceramic Bulletin 36 (6): 212–213.
^ ^a ^b "Cesium Atoms at Work". Time Service Department—U.S. Naval Observatory—Department of the Navy. Retrieved 2009-12-20.
^ ^a ^b ^c Downs, J. D.; Blaszczynski, M.; Turner, J.; Harris, M. (February 2006). Drilling and Completing Difficult HP/HT Wells With the Aid of Cesium Formate Brines-A Performance Review. IADC/SPE Drilling Conference. Miami, Florida, USASociety of Petroleum Engineers. doi:10.2118/99068-MS. Archived from the original on 2007-10-12.
^ Flatern, Rick (2001). "Keeping cool in the HPHT environment". Offshore Engineer (February): 33–37.
^ Essen, L.; Parry, J.V.L. (1955). "An Atomic Standard of Frequency and Time Interval: A Caesium Resonator". Nature 176 (4476): 280–282. Bibcode:1955Natur.176..280E. doi:10.1038/176280a0.
^ Reel, Monte (2003-07-22). "Where timing truly is everything". The Washington Post. p. B1. Retrieved 2010-01-26.
^ Rasor, Ned S.; Warner, Charles (September 1964). "Correlation of Emission Processes for Adsorbed Alkali Films on Metal Surfaces". Journal of Applied Physics 35 (9): 2589–2600. Bibcode:1964JAP....35.2589R. doi:10.1063/1.1713806.
^ "Cesium Supplier & Technical Information". American Elements. Retrieved 2010-01-25.
^ Smedley, John; Rao, Triveni; Wang, Erdong (2009). "K₂CsSb Cathode Development". American Institute of Physics Conference Proceedings 1149: 1062–1066. doi:10.1063/1.3215593.
^ Görlich, P. (1936). "Über zusammengesetzte, durchsichtige Photokathoden". Zeitschrift für Physik 101 (5–6): 335–342. Bibcode:1936ZPhy..101..335G. doi:10.1007/BF01342330.
^ Groeger, S.; Pazgalev, A. S.; Weis, A. (2005). "Comparison of discharge lamp and laser pumped cesium magnetometers". Applied Physics B 80 (6): 645–654. arXiv:physics/0412011. Bibcode:2005ApPhB..80..645G. doi:10.1007/s00340-005-1773-x.
^ Haven, Mary C.; Tetrault, Gregory A.; Schenken, Jerald R. (1994). "Internal Standards". Laboratory instrumentation. New York: John Wiley and Sons. p. 108. ISBN 978-0-471-28572-4.
^ McGee, James D. (1969). Photo-electronic image devices: proceedings of the fourth symposium held at Imperial College, London, September 16–20, 1968 1. Academic Press. p. 391. ISBN 978-0-12-014528-7.
^ Manfred Bick, Horst Prinz, "Cesium and Cesium Compounds" in Ullmann's Encyclopedia of Industrial Chemistry 2005, Wiley-VCH, Weinheim. doi:10.1002/14356007.a06 153.
^ Desai, Mohamed A., ed. (2000). "Gradient Materials". Downstream processing methods. Totowa, N.J.: Humana Press. pp. 61–62. ISBN 978-0-89603-564-5.
^ Burt, R. O. (1993). "Cesium and cesium compounds". Kirk-Othmer encyclopedia of chemical technology 5 (4th ed.). New York: John Wiley & Sons. p. 759. ISBN 978-0-471-15158-6.
^ Friestad, Gregory K.; Branchaud, Bruce P.; Navarrini, Walter and Sansotera, Maurizio (2007) "Cesium Fluoride" in Encyclopedia of Reagents for Organic Synthesis, John Wiley & Sons. doi:10.1002/047084289X.rc050.pub2
^ Okumura, Takeshi (2003-10-21). "The material flow of radioactive cesium-137 in the U.S. 2000" (PDF). United States Environmental Protection Agency. Retrieved 2009-12-20.
^ Jensen, N. L. (1985). "Cesium". Mineral facts and problems. Bulletin 675. U.S. Bureau of Mines. pp. 133–138.
^ "IsoRay's Cesium-131 Medical Isotope Used In Milestone Procedure Treating Eye Cancers At Tufts-New England Medical Center". Medical News Today. 2007-12-17. Retrieved 2010-02-15.
^ Bentel, Gunilla Carleson (1996). "Caesium-137 Machines". Radiation therapy planning. McGraw-Hill Professional. pp. 22–23. ISBN 978-0-07-005115-7. Retrieved 2010-09-26.
^ National Research Council (U.S.). Committee on Radiation Source Use and Replacement (2008). Radiation source use and replacement: abbreviated version. National Academies Press. ISBN 978-0-309-11014-3.
^ Loxton, R.; Pope, P., eds. (1995). "Level and density measurement using non-contact nuclear gauges". Instrumentation : A Reader. London: Chapman & Hall. pp. 82–85. ISBN 978-0-412-53400-3.
^ Timur, A.; Toksoz, M. N. (1985). "Downhole Geophysical Logging". Annual Review of Earth and Planetary Sciences 13: 315–344. Bibcode:1985AREPS..13..315T. doi:10.1146/annurev.ea.13.050185.001531.
^ Kendall, Carol. "Isotope Tracers Project – Resources on Isotopes – Cesium". National Research Program – U.S. Geological Survey. Retrieved 2010-01-25.
^ Marcucci, M. G.; Polk, J. E. (2000). "NSTAR Xenon Ion Thruster on Deep Space 1: Ground and flight tests (invited)". Review of Scientific Instruments 71 (3): 1389–1400. Bibcode:2000RScI...71.1389M. doi:10.1063/1.1150468.
^ Sovey, James S.; Rawlin, Vincent K.; Patterson, Michael J. "A Synopsis of Ion Propulsion Development Projects in the United States: SERT I to Deep Space I" (PDF). NASA. Retrieved 2009-12-12.
^ Marrese, C.; Polk, J.; Mueller, J.; Owens, A.; Tajmar, M.; Fink, R. & Spindt, C. (October 2001). In-FEEP Thruster Ion Beam Neutralization with Thermionic and Field Emission Cathodes (PDF). 27th International Electric Propulsion Conference. Pasadena, California. pp. 1–15. Retrieved 2010-01-25.
^ "Infrared illumination compositions and articles containing the same". United States Patent 6230628. Freepatentsonline.com. Retrieved 2010-01-25.
^ "LUU-19 Flare". Federation of American Scientists. 2000-04-23. Retrieved 2009-12-12.
^ Charrier, E.; Charsley, E.L.; Laye, P.G.; Markham, H.M.; Berger, B.; Griffiths, T.T. (2006). "Determination of the temperature and enthalpy of the solid–solid phase transition of caesium nitrate by differential scanning calorimetry". Thermochimica Acta 445: 36–39. doi:10.1016/j.tca.2006.04.002.
^ Crickmore, Paul F. (2000). Lockheed SR-71: the secret missions exposed. Osprey. p. 47. ISBN 978-1-84176-098-8.
^ National Research Council (U.S.) (2001). Energy research at DOE—Was it worth it?. National Academy Press. pp. 190–194. ISBN 978-0-309-07448-3. Retrieved 2010-09-26.
^ Roskill Information Services (1984). Economics of Caesium and Rubidium (Reports on Metals & Minerals). London, United Kingdom: Roskill Information Services. p. 51. ISBN 978-0-86214-250-6.
^ Data from the OECD report and Wilson, B. J. (1966) The radiochemical Manual (2nd ed.).
^ Pinsky, Carl; Bose, Ranjan; Taylor, J. R.; McKee, Jasper; Lapointe, Claude; Birchall, James (1981). "Cesium in mammals: Acute toxicity, organ changes and tissue accumulation". Journal of Environmental Science and Health, Part A 16 (5): 549– 567. doi:10.1080/10934528109375003.
^ Johnson, Garland T.; Lewis, Trent R.; Wagner, D. Wagner (1975). "Acute toxicity of cesium and rubidium compounds". Toxicology and Applied Pharmacology 32 (2): 239–245. doi:10.1016/0041-008X(75)90216-1. PMID 1154391.
^ Rundo, J. (1964). "A Survey of the Metabolism of Caesium in Man". British Journal of Radiology 37 (37): 108–114. doi:10.1259/0007-1285-37-434-108.
^ Nishita, H.; Dixon, D.; Larson, K. H. (1962). "Accumulation of Cs and K and growth of bean plants in nutrient solution and soils". Plant and Soil 17 (2): 221–242. doi:10.1007/BF01376226.
^ Avery, S. (1996). "Fate of caesium in the environment: Distribution between the abiotic and biotic components of aquatic and terrestrial ecosystems". Journal of Environmental Radioactivity 30 (2): 139–171. doi:10.1016/0265-931X(96)89276-9.
^ Salbu, Brit; Østby, Georg; Garmo, Torstein H.; Hove, Knut (1992). "Availability of caesium isotopes in vegetation estimated from incubation and extraction experiments". Analyst 117 (3): 487–491. Bibcode:1992Ana...117..487S. doi:10.1039/AN9921700487. PMID 1580386.
^ "Accumulation of potassium, rubidium and caesium (¹³³Cs and ¹³⁷Cs) in various fractions of soil and fungi in a Swedish forest". Science of The Total Environment 408 (12): 2543–2548. 2010. doi:10.1016/j.scitotenv.2010.02.024.
^ Smith, Jim T.; Beresford, Nicholas A. (2005). Chernobyl: Catastrophe and Consequences. Berlin: Springer. ISBN 3-540-23866-2.
^ Eremeev, V. N.; Chudinovskikh, T. V.; Batrakov, G. F.; Ivanova, T. M. (1991). "Radioactive isotopes of caesium in the waters and near-water atmospheric layer of the Black Sea". Physical Oceanography 2 (1): 57–64. doi:10.1007/BF02197418.
^ Redman, H. C.; McClellan, R. O.; Jones, R. K.; Boecker, B. B.; Chiffelle, T. L.; Pickrell, J. A.; Rypka, E. W. (1972). "Toxicity of 137-CsCl in the Beagle. Early Biological Effects". Radiation Research 50 (3): 629–648. doi:10.2307/3573559. JSTOR 3573559. PMID 5030090.
^ "Chinese 'find' radioactive ball". BBC News. 2009-03-27. Retrieved 2010-01-25.
^ Charbonneau, Louis (2003-03-12). "IAEA director warns of 'dirty bomb' risk". The Washington Post. Reuters. p. A15. Retrieved 2010-04-28.

External links

Daniel A. Steck. "Cesium D Line Data" (PDF). Los Alamos National Laboratory (technical report LA-UR-03-7943).
Caesium or Cesium at The Periodic Table of Videos (University of Nottingham)
View the reaction of Caesium (most reactive metal in the periodic table) with Fluorine (most reactive non-metal) courtesy of The Royal Institution.

UpToDate Contents

全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.

1. 成人における放射線障害の生物学および臨床的特徴 biology and clinical features of radiation injury in adults
2. がん治療における放射線治療手技 radiation therapy techniques in cancer treatment
3. 成人における低カリウム血症の原因 causes of hypokalemia in adults
4. 輸血関連移植片対宿主病（GVHD） transfusion associated graft versus host disease
5. 原子力災害後の小児における放射線被曝のマネージメント management of radiation exposure in children following a nuclear disaster

English Journal

Journal of hazardous materials.
PMID 21420236

Health physics.
PMID 21451316

Japanese Journal

Caesium and Lanthanum Suppression of Signal Fluctuation in Flame Atomic Absorption and Atomic Emission Spectrometry

NIEDZIELSKI Przemyslaw,DOSTATNI Armand
Analytical Sciences 30(7), 729-734, 2014-07
NAID 40020116728

放射性降下物に起因した果樹樹体内放射性核種の分布(第8報)摘果果実を用いたモモ成熟果実の放射性セシウム濃度の推定について

高田大輔,佐藤守,阿部和博 [他]
Radioisotopes 63(6), 293-298, 2014-06
NAID 40020126294

千葉県立柏の葉公園内の「日本庭園」における除染効果の検証

市川有二郎,井上智博,内藤季和 [他]
Radioisotopes 63(1), 47-57, 2014-01
NAID 40019949387

Related Pictures

★リンクテーブル★

リンク元	「セシウム」「Cs」

「セシウム」

NFPA 704; "fire diamond"
	3 4 3 W
	The fire diamond hazard sign for caesium metal

Caesium, ₅₅Cs
	Spectral lines of caesium
General properties
Name, symbol	caesium, Cs
Appearance	silvery gold
Pronunciation	/ˈsiːziəm/; SEE-zee-əm
Alternative name	cesium
Caesium in the periodic table
	xenon ← caesium → barium
Atomic number (Z)	55
Group, block	group 1 (alkali metals), s-block
Period	period 6
Element category	alkali metal
Standard atomic weight (±) (Ar)	132.90545196(6)
Electron configuration	[Xe] 6s1
per shell	2, 8, 18, 18, 8, 1
Physical properties
Phase	solid
Melting point	301.7 K (28.5 °C, 83.3 °F)
Boiling point	944 K (671 °C, 1240 °F)
Density near r.t.	1.93 g/cm3
when liquid, at m.p.	1.843 g/cm3
Critical point	1938 K, 9.4 MPa
Heat of fusion	2.09 kJ/mol
Heat of vapourisation	63.9 kJ/mol
Molar heat capacity	32.210 J/(mol·K)
Atomic properties
Oxidation states	+1, −1 (a strongly basic oxide)
Electronegativity	Pauling scale: 0.79
Ionisation energies	1st: 375.7 kJ/mol; 2nd: 2234.3 kJ/mol; 3rd: 3400 kJ/mol
Atomic radius	empirical: 265 pm
Covalent radius	244±11 pm
Van der Waals radius	343 pm
Miscellanea
Crystal structure	body-centered cubic (bcc)
Thermal expansion	97 µm/(m·K) (at 25 °C)
Thermal conductivity	35.9 W/(m·K)
Electrical resistivity	205 nΩ·m (at 20 °C)
Magnetic ordering	paramagnetic
Young's modulus	1.7 GPa
Bulk modulus	1.6 GPa
Mohs hardness	0.2
Brinell hardness	0.14 MPa
CAS Number	7440-46-2
History
Naming	from Latin caesius, sky blue, for its spectral colours
Discovery	Robert Bunsen and Gustav Kirchhoff (1860)
First isolation	Carl Setterberg (1882)
Most stable isotopes of caesium
	Decay modes in parentheses are predicted, but have not yet been observed
	view; talk; edit; · references

　　[★]

英: cesium、caesium、Cs

放射線医学

核分裂により生成する放射性核種：セシウム-137。半減期30年。β線、γ線。筋肉、全身。

同位体

同位体	NA	半減期	DM	DE (MeV)	DP
133Cs	100 %	中性子78個で安定
134Cs	syn	2.0648 y	ε	1.229	134Xe
134Cs	syn	2.0648 y	β-	2.059	134Ba
135Cs	trace	2.3×106 y	β-	0.269	135Ba
137Cs	trace	30.17 y[2]	β-	1.174	137Ba

「Cs」

　　[★] セシウム, caesium, cesium 　

[10] Caesium is the spelling recommended by the International Union of Pure and Applied Chemistry (IUPAC).^[6] The American Chemical Society (ACS) has used the spelling cesium since 1921,^[7]^[8] following Webster's New International Dictionary. The element was named after the Latin word caesius, meaning "bluish grey".^[9] In medieval and early modern writings caesius was spelled with the ligature æ as cæsius; hence, an alternative but now old-fashioned orthography is cæsium. More spelling explanation at ae/oe vs e.

[11] Along with rubidium (39 °C [102 °F]), francium (estimated at 27 °C [81 °F]), mercury (−39 °C [−38 °F]), and gallium (30 °C [86 °F]); bromine is also liquid at room temperature (melting at −7.2 °C, 19 °F), but it is a halogen, not a metal.

[16] The radioactive element francium may also have a lower melting point, but its radioactivity prevents enough of it from being isolated for direct testing.^[13]

[oxistates-26] It differs from this value in caesides, which contain the Cs⁻ anion and thus have caesium in the −1 oxidation state.^[3] Additionally, 2013 calculations by Mao-sheng Miao indicate that under conditions of extreme pressure (greater than 30 GPa), the inner 5p electrons could form chemical bonds, where caesium would behave as the seventh 5p element. This discovery indicates that higher caesium fluorides with caesium in oxidation states from +2 to +6 could exist under such conditions.^[22]

[29] Francium's electropositivity has not been experimentally measured due to its high radioactivity. Measurements of the first ionization energy of francium suggest that its relativistic effects may lower its reactivity and raise its electronegativity above that expected from periodic trends.^[24]

[70] Bunsen quotes Aulus Gellius Noctes Atticae II, 26 by Nigidius Figulus: Nostris autem veteribus caesia dicts est quae Graecis, ut Nigidus ait, de colore coeli quasi coelia.

[IUPAC-1] Standard Atomic Weights 2013. Commission on Isotopic Abundances and Atomic Weights

[b92-2] Haynes, William M., ed. (2011). CRC Handbook of Chemistry and Physics (92nd ed.). Boca Raton, FL: CRC Press. p. 4.121. ISBN 1439855110.

[caeside-3] Dye, J. L. (1979). "Compounds of Alkali Metal Anions". Angewandte Chemie International Edition 18 (8): 587–598. doi:10.1002/anie.197905871.

[magnet-4] "Magnetic susceptibility of the elements and inorganic compounds". Handbook of Chemistry and Physics (PDF) (87th ed.). CRC press. ISBN 0-8493-0487-3. Retrieved 2010-09-26.

[isotope-5] "NIST Radionuclide Half-Life Measurements". NIST. Retrieved 2011-03-13.

[6] International Union of Pure and Applied Chemistry (2005). Nomenclature of Inorganic Chemistry (IUPAC Recommendations 2005). Cambridge (UK): RSC–IUPAC. ISBN 0-85404-438-8. pp. 248–49. Electronic version..

[7] Coghill, Anne M.; Garson, Lorrin R., eds. (2006). The ACS Style Guide: Effective Communication of Scientific Information (3rd ed.). Washington, D.C.: American Chemical Society. p. 127. ISBN 0-8412-3999-1.

[8] Coplen, T. B.; Peiser, H. S. (1998). "History of the recommended atomic-weight values from 1882 to 1997: a comparison of differences from current values to the estimated uncertainties of earlier values" (PDF). Pure Appl. Chem. 70 (1): 237–257. doi:10.1351/pac199870010237.

[9] OED entry for "caesium". Second edition, 1989; online version June 2012. Retrieved 07 September 2012. Earlier version first published in New English Dictionary, 1888.

[USGS-12] ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o ^p ^q ^r ^s ^t ^u ^v ^w ^x ^y ^z ^aa Butterman, William C.; Brooks, William E.; Reese, Jr., Robert G. (2004). "Mineral Commodity Profile: Cesium" (PDF). United States Geological Survey. Retrieved 2009-12-27.

[13] Heiserman, David L. (1992). Exploring Chemical Elements and their Compounds. McGraw-Hill. pp. 201–203. ISBN 0-8306-3015-5.

[14] Addison, C. C. (1984). The Chemistry of the Liquid Alkali Metals. Wiley. ISBN 0-471-90508-9. Retrieved 2012-09-28.

[15] "Francium". Periodic.lanl.gov. Retrieved 2010-02-23.

[autogenerated1-17] Kaner, Richard (2003). "C&EN: It's Elemental: The Periodic Table – Cesium". American Chemical Society. Retrieved 2010-02-25.

[RSC-18] "Chemical Data – Caesium – Cs". Royal Society of Chemistry. Retrieved 2010-09-27.

[CRC74-19] Lynch, Charles T. (1974). CRC Handbook of Materials Science. CRC Press. p. 13. ISBN 978-0-8493-2321-8.

[flametests-20] Clark, Jim (2005). "Flame Tests". chemguide. Retrieved 2012-01-29.

[21] Taova, T. M.; et al. (June 22, 2003). "Density of melts of alkali metals and their Na-K-Cs and Na-K-Rb ternary systems" (PDF). Fifteenth symposium on thermophysical properties, Boulder, Colorado, USA. Retrieved 2010-09-26.

[22] Deiseroth, H. J. (1997). "Alkali metal amalgams, a group of unusual alloys". Progress in Solid State Chemistry 25 (1–2): 73–123. doi:10.1016/S0079-6786(97)81004-7.

[23] Gray, Theodore (2012) The Elements, Black Dog & Leventhal Publishers, p. 131, ISBN 1-57912-895-5.

[greenwood-24] Greenwood, N.N.; Earnshaw, A. (1984). Chemistry of the Elements. Oxford, UK: Pergamon Press. ISBN 0-08-022057-6.

[25] Moskowitz, Clara. "A Basic Rule of Chemistry Can Be Broken, Calculations Show". Scientific American. Retrieved 2013-11-22.

[HollemanAF-27] Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1985). "Vergleichende Übersicht über die Gruppe der Alkalimetalle". Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 953–955. ISBN 3-11-007511-3.

[28] Andreev, S. V.; Letokhov, V. S.; Mishin, V. I. (1987). "Laser resonance photoionization spectroscopy of Rydberg levels in Fr". Physical Review Letters 59 (12): 1274–76. Bibcode:1987PhRvL..59.1274A. doi:10.1103/PhysRevLett.59.1274. PMID 10035190.

[30] Hogan, C. M. (2011). Phosphate at the Wayback Machine (archived October 25, 2012) in Encyclopedia of Earth. Jorgensen, A. and Cleveland, C.J. (eds.). National Council for Science and the Environment. Washington DC

[31] Köhler, Michael J. (1999). Etching in microsystem technology. Wiley-VCH. p. 90. ISBN 3-527-29561-5.

[32] Jansen, Martin (2005-11-30). "Effects of relativistic motion of electrons on the chemistry of gold and platinum". Solid State Sciences 7 (12): 1464–1474. Bibcode:2005SSSci...7.1464J. doi:10.1016/j.solidstatesciences.2005.06.015.

[33] Moyer, Bruce A.; Birdwell, Joseph F.; Bonnesen, Peter V.; Delmau, Laetitia H. (2005). "Use of Macrocycles in Nuclear-Waste Cleanup: A Realworld Application of a Calixcrown in Cesium Separation Technology". Macrocyclic Chemistry: 383–405. doi:10.1007/1-4020-3687-6_24. ISBN 1-4020-3364-8. .

[chains-34] Senga, Ryosuke; Suenaga, Kazu (2015). "Single-atom electron energy loss spectroscopy of light elements". Nature Communications 6: 7943. doi:10.1038/ncomms8943. PMC 4532884. PMID 26228378.

[35] Evans, F. W.; Litt, M. H.; Weidler-Kubanek, A. M.; Avonda, F. P. (1968). "Reactions Catalyzed by Potassium Fluoride. 111. The Knoevenagel Reaction". Journal of Organic Chemistry 33 (5): 1837–1839. doi:10.1021/jo01269a028.

[36] Wells, A.F. (1984). Structural Inorganic Chemistry (5th ed.). Oxford Science Publications. ISBN 0-19-855370-6.

[cotton-37] Cotton, F. Albert; Wilkinson, G. (1962). Advanced Inorganic Chemistry. John Wiley & Sons, Inc. p. 318. ISBN 0-471-84997-9.

[CRC-38] Lide, David R., ed. (2006). CRC Handbook of Chemistry and Physics (87th ed.). Boca Raton, FL: CRC Press. pp. 451, 514. ISBN 0-8493-0487-3.

[ReferenceA-39] Tsai, Khi-Ruey; Harris, P. M.; Lassettre, E. N. (1956). "The Crystal Structure of Cesium Monoxide". Journal of Physical Chemistry 60 (3): 338–344. doi:10.1021/j150537a022.

[autogenerated2-40] "Information Bridge: DOE Scientific and Technical Information" (PDF). Office of Scientific and Technical Information — U.S. Department of Energy. 2009-11-23. Retrieved 2010-02-15.

[41] Vol'nov, I. I.; Matveev, V. V. (1963). "Synthesis of cesium ozonide through cesium superoxide". Bulletin of the Academy of Sciences, USSR Division of Chemical Science 12 (6): 1040–1043. doi:10.1007/BF00845494.

[42] Tokareva, S. A. (1971). "Alkali and Alkaline Earth Metal Ozonides". Russian Chemical Reviews 40 (2): 165–174. Bibcode:1971RuCRv..40..165T. doi:10.1070/RC1971v040n02ABEH001903.

[Simon-43] Simon, A. (1997). "Group 1 and 2 Suboxides and Subnitrides — Metals with Atomic Size Holes and Tunnels". Coordination Chemistry Reviews 163: 253–270. doi:10.1016/S0010-8545(97)00013-1.

[44] Tsai, Khi-Ruey; Harris, P. M.; Lassettre, E. N. (1956). "The Crystal Structure of Tricesium Monoxide". Journal of Physical Chemistry 60 (3): 345–347. doi:10.1021/j150537a023.

[45] Okamoto, H. (2009). "Cs-O (Cesium-Oxygen)". Journal of Phase Equilibria and Diffusion 31: 86–87. doi:10.1007/s11669-009-9636-5.

[46] Band, A.; Albu-Yaron, A.; Livneh, T.; Cohen, H.; Feldman, Y.; Shimon, L.; Popovitz-Biro, R.; Lyahovitskaya, V.; Tenne, R. (2004). "Characterization of Oxides of Cesium". The Journal of Physical Chemistry B 108 (33): 12360–12367. doi:10.1021/jp036432o.

[47] Brauer, G. (1947). "Untersuchungen ber das System Csium-Sauerstoff". Zeitschrift fr anorganische Chemie 255: 101–124. doi:10.1002/zaac.19472550110.

[48] Busso, M.; Gallino, R.; Wasserburg, G. J. (1999). "Nucleosynthesis in Asymptotic Giant Branch Stars: Relevance for Galactic Enrichment and Solar System Formation" (PDF). Annula Review of Astronomy and Astrophysics 37: 239–309. Bibcode:1999ARA&A..37..239B. doi:10.1146/annurev.astro.37.1.239. Retrieved 2010-02-20.

[49] Arnett, David (1996). Supernovae and Nucleosynthesis: An Investigation of the History of Matter, from the Big Bang to the Present. Princeton University Press. p. 527. ISBN 0-691-01147-8.

[NMR-50] Goff, C; Matchette, Michael A.; Shabestary, Nahid; Khazaeli, Sadegh (1996). "Complexation of caesium and rubidium cations with crown ethers in N,N-dimethylformamide". Polyhedron 15 (21): 3897–3903. doi:10.1016/0277-5387(96)00018-6.

[51] Brown, F.; Hall, G.R.; Walter, A.J. (1955). "The half-life of Cs137". Journal of Inorganic and Nuclear Chemistry 1 (4–5): 241–247. doi:10.1016/0022-1902(55)80027-9.

[nuclidetable-52] Sonzogni, Alejandro. "Interactive Chart of Nuclides". National Nuclear Data Center: Brookhaven National Laboratory. Retrieved 2008-06-06.

[53] Ohki, Shigeo; Takaki, Naoyuki (14–16 October 2002). Transmutation of Cesium-135 with Fast Reactors (PDF). Seventh Information Exchange Meeting on Actinide and Fission Product Partitioning and Transmutation. Jeju, Korea. Retrieved 2010-09-26.

[54] "20 Xenon: A Fission Product Poison". CANDU Fundamentals (PDF) (Report). CANDU Owners Group Inc. Retrieved 2010-09-15.

[55] Taylor, V. F.; Evans, R. D.; Cornett, R. J. (2008). "Preliminary evaluation of ¹³⁵Cs/¹³⁷Cs as a forensic tool for identifying source of radioactive contamination". Journal of Environmental Radioactivity 99 (1): 109–118. doi:10.1016/j.jenvrad.2007.07.006. PMID 17869392.

[56] "Cesium | Radiation Protection". U.S. Environmental Protection Agency. 2006-06-28. Retrieved 2010-02-15.

[57] Zerriffi, Hisham (2000-05-24). IEER Report: Transmutation – Nuclear Alchemy Gamble (Report). Institute for Energy and Environmental Research. Retrieved 2010-02-15.

[58] Chernobyl's Legacy: Health, Environmental and Socia-Economic Impacts and Recommendations to the Governments of Belarus, Russian Federation and Ukraine (PDF) (Report). International Atomic Energy Agency. Retrieved 2010-02-18.

[59] Kase, Takeshi; Konashi, Kenji; Takahashi, Hiroshi; Hirao, Yasuo (1993). "Transmutation of Cesium-137 Using Proton Accelerator". Journal of Nuclear Science and Technology 30 (9): 911–918. doi:10.3327/jnst.30.911.

[60] Knief, Ronald Allen (1992). "Fission Fragments". Nuclear engineering: theory and technology of commercial nuclear power. Taylor & Francis. p. 42. ISBN 978-1-56032-088-3.

[61] Ishiwatari, N.; Nagai, H. "Release of xenon-137 and iodine-137 from UO2 pellet by pulse neutron irradiation at NSRR". Nippon Genshiryoku Gakkaishi 23 (11): 843–850. OSTI 5714707.

[62] Turekian, K.K.; Wedepohl, K. H. (1961). "Distribution of the elements in some major units of the Earth's crust". Geological Society of America Bulletin 72 (2): 175–192. Bibcode:1961GSAB...72..175T. doi:10.1130/0016-7606(1961)72[175:DOTEIS]2.0.CO;2. ISSN 0016-7606.

[63] Rowland, Simon (1998-07-04). "Cesium as a Raw Material: Occurrence and Uses". Artemis Society International. Retrieved 2010-02-15.

[Cerny-64] Černý, Petr; Simpson, F. M. (1978). "The Tanco Pegmatite at Bernic Lake, Manitoba: X. Pollucite" (PDF). Canadian Mineralogist 16: 325–333. Retrieved 2010-09-26.

[USGS-Cs2-65] Polyak, Désirée E. "Cesium" (PDF). U.S. Geological Survey. Retrieved 2009-10-17.

[66] Norton, J. J. (1973). "Lithium, cesium, and rubidium—The rare alkali metals". In Brobst, D. A.; Pratt, W. P. United States mineral resources. Paper 820. U.S. Geological Survey Professional. pp. 365–378. Retrieved 2010-09-26.

[Burt-67] Burt, R. O. (1993). "Caesium and cesium compounds". Kirk-Othmer encyclopedia of chemical technology 5 (4th ed.). New York: John Wiley & Sons, Inc. pp. 749–764. ISBN 978-0-471-48494-3.

[68] Benton, William; Turner, Jim (2000). "Cesium formate fluid succeeds in North Sea HPHT field trials" (PDF). Drilling Contractor (May/June): 38–41. Retrieved 2010-09-26.

[CEC-69] Eagleson, Mary, ed. (1994). Concise encyclopedia chemistry. Eagleson, Mary. Berlin: de Gruyter. p. 198. ISBN 978-3-11-011451-5.

[71] Oxford English Dictionary, 2nd Edition

[BuKi1861-72] Kirchhoff, G.; Bunsen, R. (1861). "Chemische Analyse durch Spectralbeobachtungen". Annalen der Physik und Chemie 189 (7): 337–381. Bibcode:1861AnP...189..337K. doi:10.1002/andp.18611890702.

[Weeks-73] Weeks, Mary Elvira (1932). "The discovery of the elements. XIII. Some spectroscopic discoveries". Journal of Chemical Education 9 (8): 1413–1434. Bibcode:1932JChEd...9.1413W. doi:10.1021/ed009p1413.

[74] Zsigmondy, Richard (2007). Colloids and the Ultra Microscope. Read books. p. 69. ISBN 978-1-4067-5938-9.

[Sett-75] Setterberg, Carl (1882). "Ueber die Darstellung von Rubidium- und Cäsiumverbindungen und über die Gewinnung der Metalle selbst". Justus Liebig's Annalen der Chemie 211: 100–116. doi:10.1002/jlac.18822110105.

[76] Strod, A.J. (1957). "Cesium—A new industrial metal". American Ceramic Bulletin 36 (6): 212–213.

[USNO-77] "Cesium Atoms at Work". Time Service Department—U.S. Naval Observatory—Department of the Navy. Retrieved 2009-12-20.

[Down-78] Downs, J. D.; Blaszczynski, M.; Turner, J.; Harris, M. (February 2006). Drilling and Completing Difficult HP/HT Wells With the Aid of Cesium Formate Brines-A Performance Review. IADC/SPE Drilling Conference. Miami, Florida, USASociety of Petroleum Engineers. doi:10.2118/99068-MS. Archived from the original on 2007-10-12.

[79] Flatern, Rick (2001). "Keeping cool in the HPHT environment". Offshore Engineer (February): 33–37.

[80] Essen, L.; Parry, J.V.L. (1955). "An Atomic Standard of Frequency and Time Interval: A Caesium Resonator". Nature 176 (4476): 280–282. Bibcode:1955Natur.176..280E. doi:10.1038/176280a0.

[81] Reel, Monte (2003-07-22). "Where timing truly is everything". The Washington Post. p. B1. Retrieved 2010-01-26.

[82] Rasor, Ned S.; Warner, Charles (September 1964). "Correlation of Emission Processes for Adsorbed Alkali Films on Metal Surfaces". Journal of Applied Physics 35 (9): 2589–2600. Bibcode:1964JAP....35.2589R. doi:10.1063/1.1713806.

[83] "Cesium Supplier & Technical Information". American Elements. Retrieved 2010-01-25.

[84] Smedley, John; Rao, Triveni; Wang, Erdong (2009). "K₂CsSb Cathode Development". American Institute of Physics Conference Proceedings 1149: 1062–1066. doi:10.1063/1.3215593.

[85] Görlich, P. (1936). "Über zusammengesetzte, durchsichtige Photokathoden". Zeitschrift für Physik 101 (5–6): 335–342. Bibcode:1936ZPhy..101..335G. doi:10.1007/BF01342330.

[86] Groeger, S.; Pazgalev, A. S.; Weis, A. (2005). "Comparison of discharge lamp and laser pumped cesium magnetometers". Applied Physics B 80 (6): 645–654. arXiv:physics/0412011. Bibcode:2005ApPhB..80..645G. doi:10.1007/s00340-005-1773-x.

[87] Haven, Mary C.; Tetrault, Gregory A.; Schenken, Jerald R. (1994). "Internal Standards". Laboratory instrumentation. New York: John Wiley and Sons. p. 108. ISBN 978-0-471-28572-4.

[88] McGee, James D. (1969). Photo-electronic image devices: proceedings of the fourth symposium held at Imperial College, London, September 16–20, 1968 1. Academic Press. p. 391. ISBN 978-0-12-014528-7.

[89] Manfred Bick, Horst Prinz, "Cesium and Cesium Compounds" in Ullmann's Encyclopedia of Industrial Chemistry 2005, Wiley-VCH, Weinheim. doi:10.1002/14356007.a06 153.

[90] Desai, Mohamed A., ed. (2000). "Gradient Materials". Downstream processing methods. Totowa, N.J.: Humana Press. pp. 61–62. ISBN 978-0-89603-564-5.

[91] Burt, R. O. (1993). "Cesium and cesium compounds". Kirk-Othmer encyclopedia of chemical technology 5 (4th ed.). New York: John Wiley & Sons. p. 759. ISBN 978-0-471-15158-6.

[92] Friestad, Gregory K.; Branchaud, Bruce P.; Navarrini, Walter and Sansotera, Maurizio (2007) "Cesium Fluoride" in Encyclopedia of Reagents for Organic Synthesis, John Wiley & Sons. doi:10.1002/047084289X.rc050.pub2

[Takeshi-93] Okumura, Takeshi (2003-10-21). "The material flow of radioactive cesium-137 in the U.S. 2000" (PDF). United States Environmental Protection Agency. Retrieved 2009-12-20.

[94] Jensen, N. L. (1985). "Cesium". Mineral facts and problems. Bulletin 675. U.S. Bureau of Mines. pp. 133–138.

[95] "IsoRay's Cesium-131 Medical Isotope Used In Milestone Procedure Treating Eye Cancers At Tufts-New England Medical Center". Medical News Today. 2007-12-17. Retrieved 2010-02-15.

[96] Bentel, Gunilla Carleson (1996). "Caesium-137 Machines". Radiation therapy planning. McGraw-Hill Professional. pp. 22–23. ISBN 978-0-07-005115-7. Retrieved 2010-09-26.

[97] National Research Council (U.S.). Committee on Radiation Source Use and Replacement (2008). Radiation source use and replacement: abbreviated version. National Academies Press. ISBN 978-0-309-11014-3.

[gauges-98] Loxton, R.; Pope, P., eds. (1995). "Level and density measurement using non-contact nuclear gauges". Instrumentation : A Reader. London: Chapman & Hall. pp. 82–85. ISBN 978-0-412-53400-3.

[99] Timur, A.; Toksoz, M. N. (1985). "Downhole Geophysical Logging". Annual Review of Earth and Planetary Sciences 13: 315–344. Bibcode:1985AREPS..13..315T. doi:10.1146/annurev.ea.13.050185.001531.

[100] Kendall, Carol. "Isotope Tracers Project – Resources on Isotopes – Cesium". National Research Program – U.S. Geological Survey. Retrieved 2010-01-25.

[101] Marcucci, M. G.; Polk, J. E. (2000). "NSTAR Xenon Ion Thruster on Deep Space 1: Ground and flight tests (invited)". Review of Scientific Instruments 71 (3): 1389–1400. Bibcode:2000RScI...71.1389M. doi:10.1063/1.1150468.

[102] Sovey, James S.; Rawlin, Vincent K.; Patterson, Michael J. "A Synopsis of Ion Propulsion Development Projects in the United States: SERT I to Deep Space I" (PDF). NASA. Retrieved 2009-12-12.

[103] Marrese, C.; Polk, J.; Mueller, J.; Owens, A.; Tajmar, M.; Fink, R. & Spindt, C. (October 2001). In-FEEP Thruster Ion Beam Neutralization with Thermionic and Field Emission Cathodes (PDF). 27th International Electric Propulsion Conference. Pasadena, California. pp. 1–15. Retrieved 2010-01-25.

[104] "Infrared illumination compositions and articles containing the same". United States Patent 6230628. Freepatentsonline.com. Retrieved 2010-01-25.

[105] "LUU-19 Flare". Federation of American Scientists. 2000-04-23. Retrieved 2009-12-12.

[106] Charrier, E.; Charsley, E.L.; Laye, P.G.; Markham, H.M.; Berger, B.; Griffiths, T.T. (2006). "Determination of the temperature and enthalpy of the solid–solid phase transition of caesium nitrate by differential scanning calorimetry". Thermochimica Acta 445: 36–39. doi:10.1016/j.tca.2006.04.002.

[107] Crickmore, Paul F. (2000). Lockheed SR-71: the secret missions exposed. Osprey. p. 47. ISBN 978-1-84176-098-8.

[108] National Research Council (U.S.) (2001). Energy research at DOE—Was it worth it?. National Academy Press. pp. 190–194. ISBN 978-0-309-07448-3. Retrieved 2010-09-26.

[109] Roskill Information Services (1984). Economics of Caesium and Rubidium (Reports on Metals & Minerals). London, United Kingdom: Roskill Information Services. p. 51. ISBN 978-0-86214-250-6.

[110] Data from the OECD report and Wilson, B. J. (1966) The radiochemical Manual (2nd ed.).

[111] Pinsky, Carl; Bose, Ranjan; Taylor, J. R.; McKee, Jasper; Lapointe, Claude; Birchall, James (1981). "Cesium in mammals: Acute toxicity, organ changes and tissue accumulation". Journal of Environmental Science and Health, Part A 16 (5): 549– 567. doi:10.1080/10934528109375003.

[112] Johnson, Garland T.; Lewis, Trent R.; Wagner, D. Wagner (1975). "Acute toxicity of cesium and rubidium compounds". Toxicology and Applied Pharmacology 32 (2): 239–245. doi:10.1016/0041-008X(75)90216-1. PMID 1154391.

[113] Rundo, J. (1964). "A Survey of the Metabolism of Caesium in Man". British Journal of Radiology 37 (37): 108–114. doi:10.1259/0007-1285-37-434-108.

[114] Nishita, H.; Dixon, D.; Larson, K. H. (1962). "Accumulation of Cs and K and growth of bean plants in nutrient solution and soils". Plant and Soil 17 (2): 221–242. doi:10.1007/BF01376226.

[115] Avery, S. (1996). "Fate of caesium in the environment: Distribution between the abiotic and biotic components of aquatic and terrestrial ecosystems". Journal of Environmental Radioactivity 30 (2): 139–171. doi:10.1016/0265-931X(96)89276-9.

[116] Salbu, Brit; Østby, Georg; Garmo, Torstein H.; Hove, Knut (1992). "Availability of caesium isotopes in vegetation estimated from incubation and extraction experiments". Analyst 117 (3): 487–491. Bibcode:1992Ana...117..487S. doi:10.1039/AN9921700487. PMID 1580386.

[117] "Accumulation of potassium, rubidium and caesium (¹³³Cs and ¹³⁷Cs) in various fractions of soil and fungi in a Swedish forest". Science of The Total Environment 408 (12): 2543–2548. 2010. doi:10.1016/j.scitotenv.2010.02.024.

[smithber05-118] Smith, Jim T.; Beresford, Nicholas A. (2005). Chernobyl: Catastrophe and Consequences. Berlin: Springer. ISBN 3-540-23866-2.

[119] Eremeev, V. N.; Chudinovskikh, T. V.; Batrakov, G. F.; Ivanova, T. M. (1991). "Radioactive isotopes of caesium in the waters and near-water atmospheric layer of the Black Sea". Physical Oceanography 2 (1): 57–64. doi:10.1007/BF02197418.

[120] Redman, H. C.; McClellan, R. O.; Jones, R. K.; Boecker, B. B.; Chiffelle, T. L.; Pickrell, J. A.; Rypka, E. W. (1972). "Toxicity of 137-CsCl in the Beagle. Early Biological Effects". Radiation Research 50 (3): 629–648. doi:10.2307/3573559. JSTOR 3573559. PMID 5030090.

[121] "Chinese 'find' radioactive ball". BBC News. 2009-03-27. Retrieved 2010-01-25.

[122] Charbonneau, Louis (2003-03-12). "IAEA director warns of 'dirty bomb' risk". The Washington Post. Reuters. p. A15. Retrieved 2010-04-28.

匿名

検索

案内

caesium