- cDNA array、DNA chip、DNA microarray、gene chip、oligonucleotide array、oligonucleotide array sequence analysis、oligonucleotide microarray
出典(authority):フリー百科事典『ウィキペディア（Wikipedia）』「2014/07/02 14:05:47」(JST)[Wiki en表示]
A DNA microarray (also commonly known as DNA chip or biochip) is a collection of microscopic DNA spots attached to a solid surface. Scientists use DNA microarrays to measure the expression levels of large numbers of genes simultaneously or to genotype multiple regions of a genome. Each DNA spot contains picomoles (10−12 moles) of a specific DNA sequence, known as probes (or reporters or oligos). These can be a short section of a gene or other DNA element that are used to hybridize a cDNA or cRNA (also called anti-sense RNA) sample (called target) under high-stringency conditions. Probe-target hybridization is usually detected and quantified by detection of fluorophore-, silver-, or chemiluminescence-labeled targets to determine relative abundance of nucleic acid sequences in the target.
- 1 The basic microarray
- 2 History
- 3 Principle
- 4 Uses and types
- 4.1 Fabrication
- 4.2 Spotted vs. in situ synthesised arrays
- 4.3 Two-channel vs. one-channel detection
- 5 Microarrays and bioinformatics
- 5.1 Experimental design
- 5.2 Standardization
- 5.3 Data analysis
- 5.4 Relation between probe and gene
- 5.5 Data warehousing
- 6 Alternative Technologies
- 7 See also
- 8 References
- 9 Glossary
- 10 External links
The basic microarray
Since an array can contain tens of thousands of probes, a microarray experiment can accomplish many genetic tests in parallel. Therefore arrays have dramatically accelerated many types of investigation. In standard microarrays, the probes are synthesized and then attached via surface engineering to a solid surface by a covalent bond to a chemical matrix (via epoxy-silane, amino-silane, lysine, polyacrylamide or others). The solid surface can be glass or a silicon chip, in which case they are colloquially known as an Affy chip when an Affymetrix chip is used. Other microarray platforms, such as Illumina, use microscopic beads, instead of the large solid support. Alternatively, microarrays can be constructed by the direct synthesis of oligonucleotide probes on solid surfaces. DNA arrays are different from other types of microarray only in that they either measure DNA or use DNA as part of its detection system.
DNA microarrays can be used to measure changes in expression levels, to detect single nucleotide polymorphisms (SNPs), or to genotype or targeted resequencing (see uses and types section). Microarrays also differ in fabrication, workings, accuracy, efficiency, and cost (see fabrication section). Additional factors for microarray experiments are the experimental design and the methods of analyzing the data (see Bioinformatics section).
Microarray technology evolved from Southern blotting, where fragmented DNA is attached to a substrate and then probed with a known DNA sequence. The first reported use of this approach was the analysis of 378 arrayed lysed bacterial colonies each harboring a different sequence which were assayed in multiple replicas for expression of the genes in multiple normal and tumor tissue. This was expanded to an analysis of more than 4000 human sequences with computer driven scanning and image processing for quantitative analysis of the sequences in human colonic tumors and normal tissue  and then to comparison of colonic tissues at different genetic risk. The use of a collection of distinct DNAs in arrays for expression profiling was also described in 1987, and the arrayed DNAs were used to identify genes whose expression is modulated by interferon. These early gene arrays were made by spotting cDNAs onto filter paper with a pin-spotting device. The use of miniaturized microarrays for gene expression profiling was first reported in 1995, and a complete eukaryotic genome (Saccharomyces cerevisiae) on a microarray was published in 1997.
The core principle behind microarrays is hybridization between two DNA strands, the property of complementary nucleic acid sequences to specifically pair with each other by forming hydrogen bonds between complementary nucleotide base pairs. A high number of complementary base pairs in a nucleotide sequence means tighter non-covalent bonding between the two strands. After washing off non-specific bonding sequences, only strongly paired strands will remain hybridized. Fluorescently labeled target sequences that bind to a probe sequence generate a signal that depends on the hybridization conditions (such as temperature), and washing after hybridization. Total strength of the signal, from a spot (feature), depends upon the amount of target sample binding to the probes present on that spot. Microarrays use relative quantitation in which the intensity of a feature is compared to the intensity of the same feature under a different condition, and the identity of the feature is known by its position.
Uses and types
Many types of arrays exist and the broadest distinction is whether they are spatially arranged on a surface or on coded beads:
- The traditional solid-phase array is a collection of orderly microscopic "spots", called features, each with thousands of identical and specific probes attached to a solid surface, such as glass, plastic or silicon biochip (commonly known as a genome chip, DNA chip or gene array). Thousands of these features can be placed in known locations on a single DNA microarray.
- The alternative bead array is a collection of microscopic polystyrene beads, each with a specific probe and a ratio of two or more dyes, which do not interfere with the fluorescent dyes used on the target sequence.
DNA microarrays can be used to detect DNA (as in comparative genomic hybridization), or detect RNA (most commonly as cDNA after reverse transcription) that may or may not be translated into proteins. The process of measuring gene expression via cDNA is called expression analysis or expression profiling.
|Application or technology||Synopsis|
|Gene expression profiling||In an mRNA or gene expression profiling experiment the expression levels of thousands of genes are simultaneously monitored to study the effects of certain treatments, diseases, and developmental stages on gene expression. For example, microarray-based gene expression profiling can be used to identify genes whose expression is changed in response to pathogens or other organisms by comparing gene expression in infected to that in uninfected cells or tissues.|
|Comparative genomic hybridization||Assessing genome content in different cells or closely related organisms.|
|GeneID||Small microarrays to check IDs of organisms in food and feed (like GMO ), mycoplasms in cell culture, or pathogens for disease detection, mostly combining PCR and microarray technology.|
|Chromatin immunoprecipitation on Chip||DNA sequences bound to a particular protein can be isolated by immunoprecipitating that protein (ChIP), these fragments can be then hybridized to a microarray (such as a tiling array) allowing the determination of protein binding site occupancy throughout the genome. Example protein to immunoprecipitate are histone modifications (H3K27me3, H3K4me2, H3K9me3, etc.), Polycomb-group protein (PRC2:Suz12, PRC1:YY1) and trithorax-group protein (Ash1) to study the epigenetic landscape or RNA Polymerase II to study the transcription landscape.|
|DamID||Analogously to ChIP, genomic regions bound by a protein of interest can be isolated and used to probe a microarray to determine binding site occupancy. Unlike ChIP, DamID does not require antibodies but makes use of adenine methylation near the protein's binding sites to selectively amplify those regions, introduced by expressing minute amounts of protein of interest fused to bacterial DNA adenine methyltransferase.|
|SNP detection||Identifying single nucleotide polymorphism among alleles within or between populations. Several applications of microarrays make use of SNP detection, including Genotyping, forensic analysis, measuring predisposition to disease, identifying drug-candidates, evaluating germline mutations in individuals or somatic mutations in cancers, assessing loss of heterozygosity, or genetic linkage analysis.|
|Alternative splicing detection||An exon junction array design uses probes specific to the expected or potential splice sites of predicted exons for a gene. It is of intermediate density, or coverage, to a typical gene expression array (with 1-3 probes per gene) and a genomic tiling array (with hundreds or thousands of probes per gene). It is used to assay the expression of alternative splice forms of a gene. Exon arrays have a different design, employing probes designed to detect each individual exon for known or predicted genes, and can be used for detecting different splicing isoforms.|
|Fusion genes microarray||A Fusion gene microarray can detect fusion transcripts, e.g. from cancer specimens. The principle behind this is building on the alternative splicing microarrays. The oligo design strategy enables combined measurements of chimeric transcript junctions with exon-wise measurements of individual fusion partners.|
|Tiling array||Genome tiling arrays consist of overlapping probes designed to densely represent a genomic region of interest, sometimes as large as an entire human chromosome. The purpose is to empirically detect expression of transcripts or alternatively spliced forms which may not have been previously known or predicted.|
Microarrays can be manufactured in different ways, depending on the number of probes under examination, costs, customization requirements, and the type of scientific question being asked. Arrays may have as few as 10 probes or up to 2.1 million micrometre-scale probes from commercial vendors.
Spotted vs. in situ synthesised arrays
Microarrays can be fabricated using a variety of technologies, including printing with fine-pointed pins onto glass slides, photolithography using pre-made masks, photolithography using dynamic micromirror devices, ink-jet printing, or electrochemistry on microelectrode arrays.
In spotted microarrays, the probes are oligonucleotides, cDNA or small fragments of PCR products that correspond to mRNAs. The probes are synthesized prior to deposition on the array surface and are then "spotted" onto glass. A common approach utilizes an array of fine pins or needles controlled by a robotic arm that is dipped into wells containing DNA probes and then depositing each probe at designated locations on the array surface. The resulting "grid" of probes represents the nucleic acid profiles of the prepared probes and is ready to receive complementary cDNA or cRNA "targets" derived from experimental or clinical samples. This technique is used by research scientists around the world to produce "in-house" printed microarrays from their own labs. These arrays may be easily customized for each experiment, because researchers can choose the probes and printing locations on the arrays, synthesize the probes in their own lab (or collaborating facility), and spot the arrays. They can then generate their own labeled samples for hybridization, hybridize the samples to the array, and finally scan the arrays with their own equipment. This provides a relatively low-cost microarray that may be customized for each study, and avoids the costs of purchasing often more expensive commercial arrays that may represent vast numbers of genes that are not of interest to the investigator. Publications exist which indicate in-house spotted microarrays may not provide the same level of sensitivity compared to commercial oligonucleotide arrays, possibly owing to the small batch sizes and reduced printing efficiencies when compared to industrial manufactures of oligo arrays.
In oligonucleotide microarrays, the probes are short sequences designed to match parts of the sequence of known or predicted open reading frames. Although oligonucleotide probes are often used in "spotted" microarrays, the term "oligonucleotide array" most often refers to a specific technique of manufacturing. Oligonucleotide arrays are produced by printing short oligonucleotide sequences designed to represent a single gene or family of gene splice-variants by synthesizing this sequence directly onto the array surface instead of depositing intact sequences. Sequences may be longer (60-mer probes such as the Agilent design) or shorter (25-mer probes produced by Affymetrix) depending on the desired purpose; longer probes are more specific to individual target genes, shorter probes may be spotted in higher density across the array and are cheaper to manufacture. One technique used to produce oligonucleotide arrays include photolithographic synthesis (Affymetrix) on a silica substrate where light and light-sensitive masking agents are used to "build" a sequence one nucleotide at a time across the entire array. Each applicable probe is selectively "unmasked" prior to bathing the array in a solution of a single nucleotide, then a masking reaction takes place and the next set of probes are unmasked in preparation for a different nucleotide exposure. After many repetitions, the sequences of every probe become fully constructed. More recently, Maskless Array Synthesis from NimbleGen Systems has combined flexibility with large numbers of probes.
Two-channel vs. one-channel detection
Two-color microarrays or two-channel microarrays are typically hybridized with cDNA prepared from two samples to be compared (e.g. diseased tissue versus healthy tissue) and that are labeled with two different fluorophores. Fluorescent dyes commonly used for cDNA labeling include Cy3, which has a fluorescence emission wavelength of 570 nm (corresponding to the green part of the light spectrum), and Cy5 with a fluorescence emission wavelength of 670 nm (corresponding to the red part of the light spectrum). The two Cy-labeled cDNA samples are mixed and hybridized to a single microarray that is then scanned in a microarray scanner to visualize fluorescence of the two fluorophores after excitation with a laser beam of a defined wavelength. Relative intensities of each fluorophore may then be used in ratio-based analysis to identify up-regulated and down-regulated genes.
Oligonucleotide microarrays often carry control probes designed to hybridize with RNA spike-ins. The degree of hybridization between the spike-ins and the control probes is used to normalize the hybridization measurements for the target probes. Although absolute levels of gene expression may be determined in the two-color array in rare instances, the relative differences in expression among different spots within a sample and between samples is the preferred method of data analysis for the two-color system. Examples of providers for such microarrays includes Agilent with their Dual-Mode platform, Eppendorf with their DualChip platform for colorimetric Silverquant labeling, and TeleChem International with Arrayit.
In single-channel microarrays or one-color microarrays, the arrays provide intensity data for each probe or probe set indicating a relative level of hybridization with the labeled target. However, they do not truly indicate abundance levels of a gene but rather relative abundance when compared to other samples or conditions when processed in the same experiment. Each RNA molecule encounters protocol and batch-specific bias during amplification, labeling, and hybridization phases of the experiment making comparisons between genes for the same microarray uninformative. The comparison of two conditions for the same gene requires two separate single-dye hybridizations. Several popular single-channel systems are the Affymetrix "Gene Chip", Illumina "Bead Chip", Agilent single-channel arrays, the Applied Microarrays "CodeLink" arrays, and the Eppendorf "DualChip & Silverquant". One strength of the single-dye system lies in the fact that an aberrant sample cannot affect the raw data derived from other samples, because each array chip is exposed to only one sample (as opposed to a two-color system in which a single low-quality sample may drastically impinge on overall data precision even if the other sample was of high quality). Another benefit is that data are more easily compared to arrays from different experiments so long as batch effects have been accounted for. A drawback to the one-color system is that, when compared to the two-color system, twice as many microarrays are needed to compare samples within an experiment.
Microarrays and bioinformatics
The advent of inexpensive microarray experiments created several specific bioinformatics challenges:
- the multiple levels of replication in experimental design (Experimental design)
- the number of platforms and independent groups and data format (Standardization)
- the treatment of the data (Statistical analysis)
- accuracy and precision (Relation between probe and gene)
- the sheer volume of data and the ability to share it (Data warehousing)
Due to the biological complexity of gene expression, the considerations of experimental design that are discussed in the expression profiling article are of critical importance if statistically and biologically valid conclusions are to be drawn from the data.
There are three main elements to consider when designing a microarray experiment. First, replication of the biological samples is essential for drawing conclusions from the experiment. Second, technical replicates (two RNA samples obtained from each experimental unit) help to ensure precision and allow for testing differences within treatment groups. The biological replicates include independent RNA extractions and technical replicates may be two aliquots of the same extraction. Third, spots of each cDNA clone or oligonucleotide are present as replicates (at least duplicates) on the microarray slide, to provide a measure of technical precision in each hybridization. It is critical that information about the sample preparation and handling is discussed, in order to help identify the independent units in the experiment and to avoid inflated estimates of statistical significance.
Microarray data is difficult to exchange due to the lack of standardization in platform fabrication, assay protocols, and analysis methods. This presents an interoperability problem in bioinformatics. Various grass-roots open-source projects are trying to ease the exchange and analysis of data produced with non-proprietary chips:
- For example, the "Minimum Information About a Microarray Experiment" (MIAME) checklist helps define the level of detail that should exist and is being adopted by many journals as a requirement for the submission of papers incorporating microarray results. But MIAME does not describe the format for the information, so while many formats can support the MIAME requirements, as of 2007[update] no format permits verification of complete semantic compliance.
- The "MicroArray Quality Control (MAQC) Project" is being conducted by the US Food and Drug Administration (FDA) to develop standards and quality control metrics which will eventually allow the use of MicroArray data in drug discovery, clinical practice and regulatory decision-making.
- The MGED Society has developed standards for the representation of gene expression experiment results and relevant annotations.
Microarray data sets are commonly very large, and analytical precision is influenced by a number of variables. Statistical challenges include taking into account effects of background noise and appropriate normalization of the data. Normalization methods may be suited to specific platforms and, in the case of commercial platforms, the analysis may be proprietary. Algorithms that affect statistical analysis include:
- Image analysis: gridding, spot recognition of the scanned image (segmentation algorithm), removal or marking of poor-quality and low-intensity features (called flagging).
- Data processing: background subtraction (based on global or local background), determination of spot intensities and intensity ratios, visualisation of data (e.g. see MA plot), and log-transformation of ratios, global or local normalization of intensity ratios, and segmentation into different copy number regions using step detection algorithms.
- Class discovery analysis: This analytic approach, sometimes called unsupervised classification or knowledge discovery, tries to identify whether microarrays (objects, patients, mice, etc.) or genes cluster together in groups. Identifying naturally existing groups of objects (microarrays or genes) which cluster together can enable the discovery of new groups that otherwise were not previously known to exist. During knowledge discovery analysis, various unsupervised classification techniques can be employed with DNA microarray data to identify novel clusters (classes) of arrays. This type of approach is not hypothesis-driven, but rather is based on iterative pattern recognition or statistical learning methods to find an optimal number of clusters in the data. Examples of unsupervised analyses include self-organizing maps, neural gas, k-means cluster analyses, hierarchical cluster analysis, and model-based cluster analysis. The input data used in class discovery analyses are commonly based on lists of genes having high informativeness (low noise) based on low values of the coefficient of variation or high values of Shannon entropy, etc. The determination of the most likely or optimal number of clusters obtained from an unsupervised analysis is called cluster validity. Some commonly used metrics for cluster validity are the silhouette index, Davies-Bouldin index, Dunn's index, or Hubert's statistic.
- Class prediction analysis: This approach, called supervised classification, establishes the basis for developing a predictive model into which future unknown test objects can be input in order to predict the most likely class membership of the test objects. Supervised analysis for class prediction involves use of techniques such as linear regression, k-nearest neighbor, learning vector quantization, decision tree analysis, random forests, naive Bayes, logistic regression, kernel regression, artificial neural networks, support vector machines, mixture of experts, and supervised neural gas. In addition, various metaheuristic methods are employed, such as genetic algorithms, covariance matrix self-adaptation, particle swarm optimization, and ant colony optimization. Input data for class prediction are usually based on filtered lists of genes which are predictive of class, determined using classical hypothesis tests (next section), Gini diversity index, or information gain (entropy).
- Hypothesis-driven statistical analysis: Identification of statistically significant changes in gene expression are commonly identified using the t-test, ANOVA, Bayesian method Mann–Whitney test methods tailored to microarray data sets, which take into account multiple comparisons or cluster analysis. These methods assess statistical power based on the variation present in the data and the number of experimental replicates, and can help minimize Type I and type II errors in the analyses.
- Dimensional reduction: Analysts often reduce the number of dimensions (genes) prior to data analysis. This may involve linear approaches such as principal components analysis (PCA), or non-linear manifold learning (distance metric learning) using kernel PCA, diffusion maps, Laplacian eigenmaps, local linear embedding, locally preserving projections, and Sammon's mapping.
- Network-based methods: Statistical methods that take the underlying structure of gene networks into account, representing either associative or causative interactions or dependencies among gene products. Weighted gene co-expression network analysis is widely used for identifying co-expression modules and intramodular hub genes. Modules may corresponds to cell types or pathways. Highly connected intramodular hubs best represent their respective modules.
Microarray data may require further processing aimed at reducing the dimensionality of the data to aid comprehension and more focused analysis. Other methods permit analysis of data consisting of a low number of biological or technical replicates; for example, the Local Pooled Error (LPE) test pools standard deviations of genes with similar expression levels in an effort to compensate for insufficient replication.
Relation between probe and gene
The relation between a probe and the mRNA that it is expected to detect is not trivial. Some mRNAs may cross-hybridize probes in the array that are supposed to detect another mRNA. In addition, mRNAs may experience amplification bias that is sequence or molecule-specific. Thirdly, probes that are designed to detect the mRNA of a particular gene may be relying on genomic EST information that is incorrectly associated with that gene.
Microarray data was found to be more useful when compared to other similar datasets. The sheer volume of data, specialized formats (such as MIAME), and curation efforts associated with the datasets require specialized databases to store the data. A number of open-source data warehousing solutions, such as InterMine and BioMart, have been created for the specific purpose of integrating diverse biological datasets, and also support analysis.
Advances in massively parallel sequencing has led to the development of RNA-Seq technology, that enables a whole transcriptome shotgun approach to characterize and quantify gene expression  . Unlike microarrays, which need a reference genome and transcriptome to be available before the microarray itself can be designed, RNA-Seq can be also be used for new model organisms whose genome has not been sequenced yet.
- Cyanine dyes, such as Cy3 and Cy5, are commonly used fluorophores with microarrays
- Gene chip analysis
- Significance analysis of microarrays
- Methylation specific oligonucleotide microarray
- Microfluidics or lab-on-chip
- Phenotype microarray
- Systems biology
- Serial analysis of gene expression
- Whole genome sequencing
- Maskos, U; Southern, EM (11 Apr 1992). "Oligonucleotide hybridizations on glass supports: a novel linker for oligonucleotide synthesis and hybridization properties of oligonucleotides synthesised in situ". Nucleic Acids Res. (Maskos U, Southern EM.) 20 (7): 1679–84. doi:10.1093/nar/20.7.1679. PMC 312256. PMID 1579459.
- Augenlicht LH, Kobrin D (1982). "Cloning and screening of sequences expressed in a mouse colon tumor". Cancer Research 42 (3): 1088–1093. PMID 7059971.
- Augenlicht et al.; Wahrman, MZ; Halsey, H; Anderson, L; Taylor, J; Lipkin, M (1987). "Expression of cloned sequences in biopsies of human colonic tissue and in colonic carcinoma cells induced to differentiate in vitro". Cancer Research 47 (22): 6017–6021. PMID 3664505.
- Augenlicht et al. (1991). "Patterns of Gene Expression that Characterize the Colonic Mucosa in Patients at Genetic Risk for Colonic Cancer". Proceedings of the National Academy of Sciences of the United States of America 88 (8): 3286–3289. doi:10.1073/pnas.88.8.3286.
- Kulesh DA, Clive DR, Zarlenga DS, Greene JJ (1987). "Identification of interferon-modulated proliferation-related cDNA sequences". Proc. Natl. Acad. Sci. U.S.A. 84 (23): 8453–8457. doi:10.1073/pnas.84.23.8453. PMC 299562. PMID 2446323.
- Schena M, Shalon D, Davis RW, Brown PO (1995). "Quantitative monitoring of gene expression patterns with a complementary DNA microarray". Science 270 (5235): 467–470. doi:10.1126/science.270.5235.467. PMID 7569999.
- Lashkari DA, DeRisi JL, McCusker JH, Namath AF, Gentile C, Hwang SY, Brown PO, Davis RW (1997). "Yeast microarrays for genome wide parallel genetic and gene expression analysis". Proc. Natl. Acad. Sci. U.S.A. 94 (24): 13057–13062. doi:10.1073/pnas.94.24.13057. PMC 24262. PMID 9371799.
- Adomas A, Heller G, Olson A, Osborne J, Karlsson M, Nahalkova J, Van Zyl L, Sederoff R, Stenlid J, Finlay R, Asiegbu FO (2008). "Comparative analysis of transcript abundance in Pinus sylvestris after challenge with a saprotrophic, pathogenic or mutualistic fungus". Tree Physiol. 28 (6): 885–897. doi:10.1093/treephys/28.6.885. PMID 18381269.
- Pollack JR, Perou CM, Alizadeh AA, Eisen MB, Pergamenschikov A, Williams CF, Jeffrey SS, Botstein D, Brown PO (1999). "Genome-wide analysis of DNA copy-number changes using cDNA microarrays". Nat Genet 23 (1): 41–46. doi:10.1038/14385. PMID 10471496.
- Moran G, Stokes C, Thewes S, Hube B, Coleman DC, Sullivan D (2004). "Comparative genomics using Candida albicans DNA microarrays reveals absence and divergence of virulence-associated genes in Candida dubliniensis". Microbiology 150 (Pt 10): 3363–3382. doi:10.1099/mic.0.27221-0. PMID 15470115.
- Hacia JG, Fan JB, Ryder O, Jin L, Edgemon K, Ghandour G, Mayer RA, Sun B, Hsie L, Robbins CM, Brody LC, Wang D, Lander ES, Lipshutz R, Fodor SP, Collins FS (1999). "Determination of ancestral alleles for human single-nucleotide polymorphisms using high-density oligonucleotide arrays". Nat Genet 22 (2): 164–167. doi:10.1038/9674. PMID 10369258.
- J Biochem Biophys Methods. 2000 Mar 16;42(3):105-10. DNA-printing: utilization of a standard inkjet printer for the transfer of nucleic acids to solid supports. Goldmann T, Gonzalez JS.
- Lausted C et al. (2004). "POSaM: a fast, flexible, open-source, inkjet oligonucleotide synthesizer and microarrayer". Genome Biology 5 (8): R58. doi:10.1186/gb-2004-5-8-r58. PMC 507883. PMID 15287980.
- Bammler T, Beyer RP; Consortium, Members of the Toxicogenomics Research; Kerr, X; Jing, LX; Lapidus, S; Lasarev, DA; Paules, RS; Li, JL; Phillips, SO (2005). "Standardizing global gene expression analysis between laboratories and across platforms". Nat Methods 2 (5): 351–356. doi:10.1038/nmeth0605-477a. PMID 15846362.
- Pease AC, Solas D, Sullivan EJ, Cronin MT, Holmes CP, Fodor SP. (1994). "Light-generated oligonucleotide arrays for rapid DNA sequence analysis". PNAS 91 (11): 5022–5026. doi:10.1073/pnas.91.11.5022. PMC 43922. PMID 8197176.
- Nuwaysir EF, Huang W, Albert TJ, Singh J, Nuwaysir K, Pitas A, Richmond T, Gorski T, Berg JP, Ballin J, McCormick M, Norton J, Pollock T, Sumwalt T, Butcher L, Porter D, Molla M, Hall C, Blattner F, Sussman MR, Wallace RL, Cerrina F, Green RD. (2002). "Gene Expression Analysis Using Oligonucleotide Arrays Produced by Maskless Photolithography". Genome Res 12 (11): 1749–1755. doi:10.1101/gr.362402. PMC 187555. PMID 12421762.
- Shalon D, Smith SJ, Brown PO (1996). "A DNA microarray system for analyzing complex DNA samples using two-color fluorescent probe hybridization". Genome Res 6 (7): 639–645. doi:10.1101/gr.6.7.639. PMID 8796352.
- Tang T, François N, Glatigny A, Agier N, Mucchielli MH, Aggerbeck L, Delacroix H (2007). "Expression ratio evaluation in two-colour microarray experiments is significantly improved by correcting image misalignment". Bioinformatics 23 (20): 2686–2691. doi:10.1093/bioinformatics/btm399. PMID 17698492.
- Churchill, GA (2002). "Fundamentals of experimental design for cDNA microarrays" (– Scholar search). Nature Genetics. supplement 32: 490–5. doi:10.1038/ng1031. PMID 12454643. Archived from the original on 2005-05-08. Retrieved 12 December 2013.
- NCTR Center for Toxicoinformatics - MAQC Project
- Little, M.A.; Jones, N.S. (2011). "Generalized Methods and Solvers for Piecewise Constant Signals: Part I". Proceedings of the Royal Society A.
- Peterson, Leif E. (2013). Classification Analysis of DNA Microarrays. John Wiley and Sons. ISBN 978-0-470-17081-6.
- Ben-Gal I., Shani A., Gohr A., Grau J., Arviv S., Shmilovici A., Posch S. and Grosse I. (2005), Identification of Transcription Factor Binding Sites with Variable-order Bayesian Networks, Bioinformatics,vol. 21, no. 11, 2657-2666. Available at http://bioinformatics.oxfordjournals.org/content/21/11/2657.full.pdf?keytype=ref&ijkey=KkxNhRdTSfvtvXY
- Yuk Fai Leung and Duccio Cavalieri, Fundamentals of cDNA microarray data analysis. TRENDS in Genetics Vol.19 No.11 November 2003.
- Priness I., Maimon O., Ben-Gal I. (2007). [Available at http://www.biomedcentral.com/1471-2105/8/111 "Evaluation of gene-expression clustering via mutual information distance measure"]. BMC Bioinformatics 8 (1): 111. doi:10.1186/1471-2105-8-111. PMC 1858704. PMID 17397530.
- Wei C, Li J, Bumgarner RE. (2004). "Sample size for detecting differentially expressed genes in microarray experiments". BMC Genomics 5: 87. doi:10.1186/1471-2164-5-87. PMC 533874. PMID 15533245.
- Emmert-Streib, F. and Dehmer, M. (2008). Analysis of Microarray Data A Network-Based Approach. Wiley-VCH. ISBN 3-527-31822-4.
- Wouters L, Gõhlmann HW, Bijnens L, Kass SU, Molenberghs G, Lewi PJ (2003). "Graphical exploration of gene expression data: a comparative study of three multivariate methods". Biometrics 59 (4): 1131–1139. doi:10.1111/j.0006-341X.2003.00130.x. PMID 14969494.
- Jain N, Thatte J, Braciale T, Ley K, O'Connell M, Lee JK (2003). "Local-pooled-error test for identifying differentially expressed genes with a small number of replicated microarrays". Bioinformatics 19 (15): 1945–1951. doi:10.1093/bioinformatics/btg264. PMID 14555628.
- Mortazavi, Ali; Brian A Williams; Kenneth McCue; Lorian Schaeffer; Barbara Wold (2008-07). "Mapping and quantifying mammalian transcriptomes by RNA-Seq". Nat Meth 5 (7): 621–628. doi:10.1038/nmeth.1226. ISSN 1548-7091. Retrieved 2009-03-13. Check date values in:
- Wang, Zhong; Mark Gerstein; Michael Snyder (2009-01). "RNA-Seq: a revolutionary tool for transcriptomics". Nat Rev Genet 10 (1): 57–63. doi:10.1038/nrg2484. ISSN 1471-0056. PMID 19015660. Retrieved 2009-03-13. Check date values in:
- An Array or slide is a collection of features spatially arranged in a two dimensional grid, arranged in columns and rows.
- Block or subarray: a group of spots, typically made in one print round; several subarrays/blocks form an array.
- Case/control: an experimental design paradigm especially suited to the two-colour array system, in which a condition chosen as control (such as healthy tissue or state) is compared to an altered condition (such as a diseased tissue or state).
- Channel: the fluorescence output recorded in the scanner for an individual fluorophore and can even be ultraviolet.
- Dye flip or Dye swap or Fluor reversal: reciprocal labelling of DNA targets with the two dyes to account for dye bias in experiments.
- Scanner: an instrument used to detect and quantify the intensity of fluorescence of spots on a microarray slide, by selectively exciting fluorophores with a laser and measuring the fluorescence with a filter (optics) photomultiplier system.
- Spot or feature: a small area on an array slide that contains picomoles of specific DNA samples.
- For other relevant terms see:
- Glossary of gene expression terms
- Protocol (natural sciences)
|Library resources about
|Wikimedia Commons has media related to DNA microarrays.|
- Gene Expression at DMOZ
- Micro Scale Products and Services for Biochemistry and Molecular Biology at DMOZ
- Products and Services for Gene Expression at DMOZ
- Online Services for Gene Expression Analysis at DMOZ
- PLoS Biology Primer: Microarray Analysis
- Rundown of microarray technology
- ArrayMining.net - a free web-server for online microarray analysis
- CLASSIFI - Gene Ontology-based gene cluster classification resource
- Microarray - How does it work?
- What Are DNA Microarrays - A Non-Biologists Introduction to Microarrays
- Microarray data processing using Self-Organizing Maps tutorial: Part 1 Part 2
- PNAS Commentary: Discovery of Principles of Nature from Mathematical Modeling of DNA Microarray Data
- Microarray Protocols
- OMICtools - An online database that integrates NGS software.
全文を閲覧するには購読必要です。 To read the full text you will need to subscribe.
- 1. 臨床腫瘍学における遺伝子発現プロファイリング、プロテオミクス、およびマイクロRNAプロファイリングの概要 overview of gene expression profiling proteomics and microrna profiling in clinical oncology
- 2. 遺伝学およびゲノミクスのためのツール：遺伝子発現プロファイリング tools for genetics and genomics gene expression profiling
- 3. 脾辺縁帯リンパ腫の臨床症状、病理学的特徴、および診断 clinical manifestations pathologic features and diagnosis of splenic marginal zone lymphoma
- 4. 前立腺生検の解釈 interpretation of prostate biopsy
- 5. 血液悪性腫瘍における細胞遺伝子解析の一般的側面 general aspects of cytogenetic analysis in hematologic malignancies
- Composite scaffolds of nano-hydroxyapatite and silk fibroin enhance mesenchymal stem cell-based bone regeneration via the interleukin 1 alpha autocrine/paracrine signaling loop.
- Liu H1, Xu GW1, Wang YF1, Zhao HS1, Xiong S1, Wu Y1, Heng BC2, An CR1, Zhu GH3, Xie DH4.
- Biomaterials.Biomaterials.2015 May;49:103-12. doi: 10.1016/j.biomaterials.2015.01.017. Epub 2015 Feb 14.
- Composite scaffolds of nano-hydroxyapatite (nHAp) and silk fibroin (SF) have been reported to promote bone regeneration mainly through signaling pathways associated with cell-biomaterial interaction. However, it is unclear whether soluble factors also play a role in osteoinduction with nHAp-SF. In t
- PMID 25725559
- Association of single nucleotide polymorphisms in the 3'UTR of ERAP1 gene with essential hypertension in the Northeastern Han Chinese.
- Yang S1, Liu X1, Gao Y2, Ding M1, Li B1, Sun H1, He Y3, Yang P4.
- Gene.Gene.2015 Apr 15;560(2):211-6. doi: 10.1016/j.gene.2015.02.005. Epub 2015 Feb 7.
- Endoplasmic reticulum aminopeptidase 1 (ERAP1) may be involved in blood pressure regulation by inactivation of angiotensin II and generation of bradykinin. Our previous study with cDNA microarray indicated that the expression of ERAP1 is down-regulated in essential hypertension (EH) patients. Since
- PMID 25665737
- Undifferentiated pulp cells and odontoblast-like cells share genes involved in the process of odontogenesis.
- Ferreira MR1, Dernowsek J2, Passos GA2, Bombonato-Prado KF3.
- Archives of oral biology.Arch Oral Biol.2015 Apr;60(4):593-9. doi: 10.1016/j.archoralbio.2014.09.015. Epub 2014 Oct 19.
- OBJECTIVE: Expression of a large number of genes during differentiation of undifferentiated pulp cells into odontoblastic cells is still unknown, hence the aim of this investigation was to compare undifferentiated pulp cells (OD-21) and odontoblast-like cells (MDPC-23) through the assessment of cell
- PMID 25621937
- Identification of Distinct Gene Expression Profiles between Esophageal Squamous Cell Carcinoma and Adjacent Normal Epithelial Tissues
- TAO Yisheng,CHAI Damin,MA Li,ZHANG Ting,FENG Zhenzhong,CHENG Zenong,WU Shiwu,QIN Yanzi,LAI Maode
- Tohoku journal of experimental medicine 226(4), 301-311, 2012-04-01
- NAID 10030612987
- Accumulated HSV1-TK Proteins Interfere with Spermatogenesis through a Disruption of the Integrity of Sertoli-Germ Cell Junctions
- CAI Li-Yi,KATO Takako,CHEN Mo [他],WANG HongHua,SEKINE Ei-ichiro,IZUMI Shun-ichiro,KATO Yukio
- Journal of Reproduction and Development 58(5), 544-551, 2012
- … To explore the molecular mechanisms of male infertility in the HSV1-TK transgenic rat, cDNA microarray and quantitative real-time PCR analyses were performed. … cDNA microarray and real-time PCRanalyses revealed significant changes (P<0.05) in the gene expression level in six genes, testin, versican, mamdc1, fgf7, ostf1 and cnot7. …
- NAID 130001854984
- Systematic Analyses of Genes Associated with Radiosensitizing Effect by Celecoxib, a Specific Cyclooxygenase-2 Inhibitor
- KIM Young-Mee,SHIN You Keun,JUN Hyun Jung [他],RHA Sun Young,PYO Hongryull
- Journal of radiation research 52(6), 752-765, 2011-11-16
- … To investigate genes regulated by COX-2 or a COX-2 specific inhibitor, celecoxib, in irradiated cancer cells, we analyzed changes in gene expression using complementary DNA microarray following celecoxib or combined celecoxib and ionizing radiation (IR) treatment in a stable COX-2 knockdown A549 (AS) and a mock cell line (AN). …
- NAID 10029653027
- Microarray Method for Genetic Testing - Duration: 6:55. by bentripp 117,043 views 6:55 Microarrays - Duration: 2:21. by Genome BC 178,028 views 2:21 Microarrays vs RNA Sequencing - Duration: 7:40. by 7:40 - Duration: 1:02 ...
- What is microarray? October 2008 まず『何をしたいか』を明確に そのためには まず病気の細胞と健 常な細胞の何が違う かを調べたいな・・・ この疾病の性質 を明らかにしたい この組織に分化すれ ばこの遺伝子が発現 するので、 分化したか ...
|リンク元||「cDNAマイクロアレイ」「gene chip」「oligonucleotide microarray」「oligonucleotide array」「DNA microarray」|
- cDNA array、cDNA microarray、DNA chip、DNA microarray、GeneChip、oligonucleotide array、oligonucleotide array sequence analysis、oligonucleotide microarray
- cDNA array、cDNA microarray、DNA chip、DNA microarray、gene chip、oligonucleotide array、oligonucleotide array sequence analysis
- cDNA array、cDNA microarray、DNA chip、DNA microarray、gene chip、oligonucleotide array sequence analysis、oligonucleotide microarray
- cDNA array、cDNA microarray、DNA chip、gene chip、oligonucleotide array、oligonucleotide array sequence analysis、oligonucleotide microarray